| 1. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:1
-
Forskningsöversikt (refereegranskat)
|
|
| 2. |
- Bombarda, F., et al.
(författare)
-
Runaway electron beam control
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 61:1
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
|
|
| 4. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 5. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:9
-
Tidskriftsartikel (refereegranskat)
|
|
| 27. |
-
Overview of the JET results
- 2015
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:10
-
Tidskriftsartikel (refereegranskat)
|
|
| 28. |
|
|
| 29. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 30. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 31. |
- Litaudon, X., et al.
(författare)
-
14 MeV calibration of JET neutron detectors-phase 1: Calibration and characterization of the neutron source
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- In view of the planned DT operations at JET, a calibration of the JET neutron monitors at 14 MeV neutron energy is needed using a 14 MeV neutron generator deployed inside the vacuum vessel by the JET remote handling system. The target accuracy of this calibration is 10% as also required by ITER, where a precise neutron yield measurement is important, e.g. for tritium accountancy. To achieve this accuracy, the 14 MeV neutron generator selected as the calibration source has been fully characterised and calibrated prior to the in-vessel calibration of the JET monitors. This paper describes the measurements performed using different types of neutron detectors, spectrometers, calibrated long counters and activation foils which allowed us to obtain the neutron emission rate and the anisotropy of the neutron generator, i.e.The neutron flux and energy spectrum dependence on emission angle, and to derive the absolute emission rate in 4π sr. The use of high resolution diamond spectrometers made it possible to resolve the complex features of the neutron energy spectra resulting from the mixed D/T beam ions reacting with the D/T nuclei present in the neutron generator target. As the neutron generator is not a stable neutron source, several monitoring detectors were attached to it by means of an ad hoc mechanical structure to continuously monitor the neutron emission rate during the in-vessel calibration. These monitoring detectors, two diamond diodes and activation foils, have been calibrated in terms of neutrons/counts within ± 5% total uncertainty. A neutron source routine has been developed, able to produce the neutron spectra resulting from all possible reactions occurring with the D/T ions in the beam impinging on the Ti D/T target. The neutron energy spectra calculated by combining the source routine with a MCNP model of the neutron generator have been validated by the measurements. These numerical tools will be key in analysing the results from the in-vessel calibration and to derive the response of the JET neutron detectors to DT plasma neutrons starting from the response to the generator neutrons, and taking into account all the calibration circumstances.
|
|
| 32. |
|
|
| 33. |
- Fahlander, Claes, et al.
(författare)
-
Excited States in 103Sn: Neutron Single-particle Energies with Respect to 100Sn
- 2001
-
Ingår i: Physical Review C (Nuclear Physics). - 0556-2813 .- 1089-490X. ; 63:2
-
Tidskriftsartikel (refereegranskat)abstract
- Gamma-ray lines from Sn-103 have been identified for the first time using EUROBALL and ancillary detectors. The level scheme of Sn-103 has been established by means of particle-gated gamma gamma coincidences. The energy spacing between the g(7/2) and d(5/2) neutron single-particle orbitals is determined from the excited states in Sn-103.
|
|
| 34. |
- Palacz, M., et al.
(författare)
-
Investigations of Neutron Deficient Nuclei Close to 100Sn with EUROBALL
- 2001
-
Ingår i: Acta Physica Polonica. Series B: Elementary Particle Physics, Nuclear Physics, Statistical Physics, Theory of Relativity, Field Theory. - 0587-4254 .- 1509-5770. ; 32, s. 999-1003
-
Tidskriftsartikel (refereegranskat)abstract
- Excited states of nuclei in the vicinity of Sn-100 have been studied using: the EUROBALL detector array. Gamma-ray lines from Sn-103 have been identified for the first time, and a level scheme of low-lying excited states of Sn-103 has been established. New constraints on energies of single particle orbitals with respect to the Sn-100 core are obtained.
|
|
| 35. |
- Sohler, D, et al.
(författare)
-
Neutron Excitations Across the N=50 Shell Gap in 102In
- 2002
-
Ingår i: Nuclear Physics, Section A. - : Elsevier. - 0375-9474 .- 1873-1554. ; 708:3-4, s. 181-189
-
Tidskriftsartikel (refereegranskat)abstract
- The structure of In-102 has been investigated by in-beam gamma-spectroscopic methods. Knowledge on the excited states of this nucleus has significantly been extended. Three cascades of transitions were observed to exceed the spin-energy domain spanned by the pig(9/2)(-1)v(d(5/2),g(7/2))(3) configurations. The new high spin states at similar to 4 MeV excitation energy could be assigned to the pig(9/2)(-1)v(d(5/2), g(7/2))(2)h (11/2) configuration, while at least those at 4.733, 5.192 and 5.853 MeV most likely arise from the vg(9/2) --> vd(5/2), g(7/2) one-particle-one-hole excitation across the N = 50 shell closure.
|
|
| 36. |
- Eriksson, Jacob, et al.
(författare)
-
Dual sightline measurements of MeV range deuterons with neutron and gamma-ray spectroscopy at JET
- 2015
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 55:12
-
Tidskriftsartikel (refereegranskat)abstract
- Observations made in a JET experiment aimed at accelerating deuterons to the MeV range by third harmonic radio-frequency (RF) heating coupled into a deuterium beam are reported. Measurements are based on a set of advanced neutron and gamma-ray spectrometers that, for the first time, observe the plasma simultaneously along vertical and oblique lines of sight. Parameters of the fast ion energy distribution, such as the high energy cut-off of the deuteron distribution function and the RF coupling constant, are determined from data within a uniform analysis framework for neutron and gamma-ray spectroscopy based on a one-dimensional model and by a consistency check among the individual measurement techniques. A systematic difference is seen between the two lines of sight and is interpreted to originate from the sensitivity of the oblique detectors to the pitch-angle structure of the distribution around the resonance, which is not correctly portrayed within the adopted one dimensional model. A framework to calculate neutron and gamma-ray emission from a spatially resolved, two-dimensional deuteron distribution specified by energy/pitch is thus developed and used for a first comparison with predictions from ab initio models of RF heating at multiple harmonics. The results presented in this paper are of relevance for the development of advanced diagnostic techniques for MeV range ions in high performance fusion plasmas, with applications to the experimental validation of RF heating codes and, more generally, to studies of the energy distribution of ions in the MeV range in high performance deuterium and deuterium-tritium plasmas.
|
|
| 37. |
- Gadea, A., et al.
(författare)
-
Spectroscopy at N=Z with EUROBALL III
- 1999
-
Ingår i: AIP Conference Proceedings. - : AIP. - 1551-7616 .- 0094-243X. ; 495, s. 195-198
-
Konferensbidrag (refereegranskat)abstract
- A complete study of the nuclear structure by means of gamma spectroscopy requires, in addition to the high resolution gamma measurement and accurate DCO's or angular distributions, the information concerning the Electric or Magnetic character of the transition. This information for transitions in nuclei far from stability valley is now reachable in the new generation of Ge-arrays based in composite detectors. EUROBALL III is a good example with the high polarization sensitivity of the 90 degrees ring of Clovers. The Polarization correlations PCO's measured in coincidence with the Cluster detectors permits to investigate transitions in weakly populated nuclei. In this contribution we present results on medium mass N=Z nuclei measured with EUROBALL III coupled with light particle ancillary detectors.
|
|
| 38. |
- Gorska, M, et al.
(författare)
-
Cd-98(48)50 : The two-proton-hole spectrum in Sn-100(50)50
- 1997
-
Ingår i: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 79:13, s. 2415-2418
-
Tidskriftsartikel (refereegranskat)abstract
- Excited states in Cd-98, two proton holes from Sn-100, were identified and studied for the first time, using in-beam spectroscopy with highly selective ancillary detectors. The structure of the (pi g(9/2))(-2) two-proton-hole spectrum below a T-1/2 = 0.48(16) mu s isomer is deduced and compared to shell-model predictions. A tentative I-pi = (8(+)) assignment, as suggested by systematics, yields a strongly reduced B(E2,8(+) --> 6(+)) = 0.44((+20)(-10)) W.u., corresponding to an effective proton charge of e(pi) = 0.85((+20)(-10))e, which is at variance with existing theoretical predictions.
|
|
| 39. |
- Gorska, M, et al.
(författare)
-
Spectroscopy of the T-z=1 nuclei close to Sn-100
- 1997
-
Ingår i: Acta Physica Polonica B. - 0587-4254 .- 1509-5770. ; 28:1-2, s. 303-307
-
Tidskriftsartikel (refereegranskat)abstract
- The two nuclei Cd-98 and Sn-102, closest neighbours of Sn-100, have been studied with a recoil catcher setup, following the reactions: Ni-58(Ti-46, alpha 2n)Cd-98 and Ni-58(Cr-50, alpha 2n)Sn-102. Long lived isomeric states were measured in Cd-98 I-pi = (8+), t(1/2) = 0.48(8) mu s and in Sn-102 I-pi = (6(+)) with t(1/2) = 1.0(6) mu s. The proposed experimental level schemes of the isomeric decay are presented and compared to the shell model predictions.
|
|
| 40. |
- Lennholm, M., et al.
(författare)
-
Real-time control of ELM and sawtooth frequencies : Similarities and differences
- 2015
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 56:1
-
Tidskriftsartikel (refereegranskat)abstract
- ELMs and Sawteeth, located in different parts of the plasma, are similar from a control engineering point of view. Both manifest themselves through quiescent periods interrupted by periodic collapses. For both, large collapses, following long quiescent periods, have detrimental effects while short periods are associated with decreased confinement. Following the installation of the all metal ’ITER like wall’ on JET, sawteeth and ELMs also play an important role by expelling tungsten from the core and edge of the plasma respectively. Control of tungsten has therefore been added to divertor heat load reduction, NTM avoidance and helium ash removal as reasons for requiring ELM and sawtooth control. It is therefore of interest to implement control systems to maintain the sawtooth and ELM frequencies in the desired ranges. On JET, ELM frequency control uses radial field ’kicks’ and pellet and gas injection as actuators, while sawtooth control uses ion cyclotron resonance heating (ICRH). JET experiments have, for the first time, established feedback control of the ELM frequency, via real time variation of the injected gas flow [1]. Using this controller in conjunction with pellet injection allows the ELM frequency to be kept as required despite variations in pellet ELM triggering efficiency. JET Sawtooth control experiments have, for the first time, demonstrated that low field side ICRH, as foreseen for ITER, can shorten sawteeth lengthened by central fast ions [2]. The development of ELM and sawtooth control could be key to achieve stable high performance JET discharges with minimal tungsten content. Integrating such schemes into an overall control strategy will be required in future tokamaks and gaining experience on current tokamaks is essential.
|
|
| 41. |
- Lipoglavšek, M., et al.
(författare)
-
In-beam study of 102Sn
- 1996
-
Ingår i: Zeitschrift für Physik A Hadrons and Nuclei. - 0939-7922 .- 1431-5831. ; 356:3, s. 239-240
-
Tidskriftsartikel (refereegranskat)abstract
- Excited states in 102Sn have been identified for the first time, in an in-beam γ-ray spectroscopic experiment. Two γ-ray transitions with energies 1472 and 497 keV following the decay of the seniority 6+ isomer with t1/2 = 1.0(5) μs were unambiguously assigned to 102Sn. Due to the very low cross section of about 2 μb for producing 102Sn in the reaction 50Cr(58Ni,1α2n), a highly selective detector setup utilizing NORDBALL ancillary detectors and a recoil catcher device was used. High γ-ray detection efficiency was achieved with two EUROBALL Ge cluster detectors.
|
|
| 42. |
- Pausch, G., et al.
(författare)
-
RoSiB - a 4 pi silicon ball for charged-particle detection in EUROBALL
- 2000
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 443:03-feb, s. 304-318
-
Tidskriftsartikel (refereegranskat)abstract
- A 4 pi silicon bail for detection and identification of light charged particles in large multidetector gamma-arrays as EUROBALL is presented. The design is based on a N = 42 ball with 12 pentagons and 30 hexagons as used in the GASP array. The absorptive material for gamma-rays is minimized to the detector thickness of 300 or 500 mu m and a 0.63 mm ceramic backing. The geometrical coverage is designed for about 90% of 4 pi. A pulse shape discrimination method with totally depleted detectors working in the reverse mount allows identifying protons and alpha-particles above an energy threshold of about 2 MeV. The performances of the ball were rested at the tandem - booster accelerator combination of the MPI Heidelberg in two experiments using the high-recoil reaction of 228 MeV Ni-58 + Ti-46 and the low-recoil reaction of 95 MeV O-16 + Ni-58. The two-dimensional spectra of zero-crossing (ZC) versus energy confirmed an excellent discrimination of protons and alpha-particles in all the detectors at different angles. The energy spectra of protons and alpha-particles measured in the experiments are presented. too. The gamma-spectra measured in coincidence with various combinations of emitted particles showed a high selectivity of the ball. The reduced total efficiency for protons of 59% and 55% and alpha-particles of 44% and 32% measured in a nuclear spectroscopy application is analyzed in a Monte-Carlo simulation (GEANT). It is due to a combined influence of a thick target needed to stop the recoiling residual nuclei and thick absorbers needed to protect the Si-detectors from scattered beam. The results along with the GEANT extrapolation to optimum experimental conditions confirm that RoSiB is a highly efficient and selective device for identification of rare reaction channels with heavy ions.
|
|
| 43. |
- Skeppstedt, O, et al.
(författare)
-
The EUROBALL neutron wall - design and performance tests of neutron detectors
- 1999
-
Ingår i: NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT. - : ELSEVIER SCIENCE BV. ; 421:3, s. 531-541
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The mechanical design of the EUROBALL neutron wall and neutron detectors, and their performance measured with a Cm-246,Cm-248 fission source are described. The array consists of 15 pseudohexaconical detector units subdivided into three, 149 mm high, herme
|
|
| 44. |
- Sohler, D., et al.
(författare)
-
Yrast states of the proton drip line nucleus 106 Sb
- 1999
-
Ingår i: Physical Review C - Nuclear Physics. - 2469-9985 .- 2469-9993 .- 0556-2813 .- 1089-490X. ; 59:3, s. 1324-1327
-
Tidskriftsartikel (refereegranskat)abstract
- Yrast states of [Formula Presented] have been investigated in the [Formula Presented] reaction using in-beam [Formula Presented]-spectroscopic methods and in the [Formula Presented] reaction performing delayed [Formula Presented] and conversion electron studies. A new isomeric state was found at 103 keV with [Formula Presented] The number of states and transitions in the proposed level scheme have been doubled. The experimental results are discussed within the framework of the shell model. © 1999 The American Physical Society.
|
|
| 45. |
|
|
| 46. |
|
|
| 47. |
- Frassinetti, Lorenzo, et al.
(författare)
-
Dimensionless scalings of confinement, heat transport and pedestal stability in JET-ILW and comparison with JET-C
- 2017
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 0741-3335 .- 1361-6587. ; 59:1
-
Tidskriftsartikel (refereegranskat)abstract
- Three dimensionless scans in the normalized Larmor radius rho*, normalized collisionality nu* and normalized plasma pressure beta have been performed in JET with the ITER-like wall (JET-ILW). The normalized energy confinement and the thermal diffusivity exhibit a scaling with rho* consistent with the earlier results obtained in the carbon wall JET (JET-C) and with a gyro-Bohm scaling. In the pedestal, experimental results show that the stability is not dependent on rho*, qualitatively in agreement with the peeling-ballooning (P-B) model. The nu* dimensionless scaling shows that JET-ILW normalized confinement has a stronger dependence on collisionality than JET-C. This leads to a reduction of the difference in the confinement between JET-ILW and JET-C to approximate to 10% at low nu*. The pedestal stability shows an improvement with decreasing nu*. This is ascribed to the increase of the bootstrap current, to the reduction of the pedestal width and to the reduction of the relative shift between pedestal density and temperature position. The beta dimensionless scan shows that, at low collisionality, JET-ILW normalized confinement has no clear dependence with beta, in agreement with part of the earlier scalings. At high collisionality, a reduction of the normalized confinement with increasing beta is observed. This behaviour is driven mainly by the pedestal where the stability is reduced with increasing beta. The P-B analysis shows that the stability reduction with increasing beta at high nu* is due to the destabilizing effect of the increased relative shift.
|
|
| 48. |
|
|
| 49. |
- Lanctot, M. J., et al.
(författare)
-
Impact of toroidal and poloidal mode spectra on the control of non-axisymmetric fields in tokamaks
- 2017
-
Ingår i: Physics of Plasmas. - : American Institute of Physics (AIP). - 1070-664X .- 1089-7674. ; 24:5
-
Tidskriftsartikel (refereegranskat)abstract
- In several tokamaks, non-axisymmetric magnetic field studies show that applied magnetic fields with a toroidal harmonic n = 2 can lead to disruptive n = 1 locked modes. In Ohmic plasmas, n = 2 magnetic reconnection thresholds in otherwise stable discharges are readily accessed at edge safety factors q similar to 3, low density, and low rotation. Similar to previous studies with n = 1 fields, the thresholds are correlated with the "overlap" field computed with the IPEC code. The overlap field quantifies the plasma-mediated coupling of the external field to the resonant field. Remarkably, the "critical overlap fields" at which magnetic islands form are similar for applied n = 1 and 2 fields. The critical overlap field increases with plasma density and edge safety factor but is independent of the toroidal field. Poloidal harmonics m> nq dominate the drive for resonant fields while m < nq harmonics have a negligible impact. This contrasts with previous results in H-mode discharges at high plasma pressure in which the toroidal angular momentum is sensitive to low poloidal harmonics. Together, these results highlight unique requirements for n > 1 field control including the need for multiple rows of coils to control selected plasma parameters for specific functions (e.g., rotation control or ELM suppression).
|
|
| 50. |
- Oya, Yasuhisa, et al.
(författare)
-
Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall
- 2018
-
Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 132, s. 24-28
-
Tidskriftsartikel (refereegranskat)abstract
- To understand the fuel retention mechanism correlation of surface chemical states and hydrogen isotope retention behavior determined by XPS (X-ray photoelectron spectroscopy) and TDS (Thermal desorption spectroscopy), respectively, for JET ITER-Like Wall samples from operational period 2011-2012 were investigated. It was found that the deposition layer was formed on the upper part of the inner vertical divertor area. At the inner plasma strike point region, the original surface materials, W or Mo, were found, indicating to an erosion-dominated region, but deposition of impurities was also found. Higher heat load would induce the formation of metal carbide. At the outer horizontal divertor tile, mixed material layer was formed with iron as an impurity. TDS showed the H and D desorption behavior and the major D desorption temperature for the upper part of the inner vertical tile was located at 370 degrees C and 530 degrees C. At the strike point region, the D desorption temperature was clearly shifted toward higher release temperatures, indicating the stabilization of D trapping by higher heat load
|
|
