| 1. |
- de Andrés Prada, Roberto, 1990-
(författare)
-
Pulsed laser deposition and nanofabrication of mesoscopic devices based on cuprates and manganites
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis explores the growth, the nano-fabrication and the study of the magneto-transport properties of Superconductor/Ferromagnet/Superconductor (SFS) structures from complex oxides such as the high Tc superconducting cuprate YBa2Cu3O7 (YBCO) and the ferromagnetic manganites La2/3Ca1/3MnO3 and La2/3Sr1/3MnO3 (LCMO and LSMO), deposited with the pulsed laser deposition (PLD) technique.The present work has been possible thanks to the collaboration between the “Magnetism and Superconductivity” Group at the University of Fribourg, in Switzerland, and the “Experimentell Kondenserade Materiens Fysik” Group at Stockholm University, in Sweden.Earlier, the two research groups in Fribourg and Stockholm had studied SFS structures from YBCO/LaMnO3/YBCO multilayers with 20 nm thick ferromagnetic and insulating LaMnO3 barriers, and obtained signs of an unconventional spin-triplet current across these structures. This finding motivated the present thesis work with a focus on two main aspects.Firstly, to explore other candidate materials suitable as barriers and optimise their growth conditions as to maintain a large ferromagnetic moment and thus a high spin polarisation of the charge carriers. Secondly, to study what happens when the thickness of the ferromagnetic and insulating LaMnO3 barrier is reduced well below 20 nm to enable larger supercurrents.It has been shown for a series of YBCO/LCMO multilayers that the ferromagnetic moment of LCMO depends critically on the PLD growth conditions as well as on the thickness and even structural details of the YBCO layer on which they are grown. Furthermore, a protocol has been established to grow heterostructures with strongly ferromagnetic manganite layers embedded in thick YBCO layers by optimising the PLD growth conditions and by substituting the bottom YBCO layer with a Co and Ca substituted version of YBCO that has a tetragonal structure (tYBCO) instead of the orthorhombic one of plain YBCO.Devices suitable for perpendicular magneto-transport measurements have been nano-fabricated from YBCO/manganite/YBCO multilayers with ~10 nm thick LCMO and LSMO layers as the F barriers. While no clear indications of a spin-triplet component of the superconducting order parameter have been obtained yet, a negative and hysteretic magneto-resistance has been observed that is indicative of a strong ferromagnetic order in the thin manganite barrier. The latter suggests a potential memory functionality of such structures that could be exploited in future spintronic memory devices.Moreover, devices have been fabricated on SFS structures with a reduced thickness of the LaMnO3 barrier of 10 nm and 5 nm. These samples were grown prior to the beginning of this PhD work using non optimised growth conditions, and it was found that the ferromagnetic properties of these LaMnO3 barriers are strongly deteriorated. It remains to be seen whether the ferromagnetic order of such thin LaMnO3 layers can be also recovered by using the optimised growth conditions as for LSMO and LCMO.
|
|
| 2. |
- Kim, Jang-Yong, 1971-
(författare)
-
Processing and On-Wafer Test of Ferroelectric Film Microwave Varactors
- 2006
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Microwave materials have been widely used in a variety of applications ranging from communication devices to military satellite services, and the study of materials properties at microwave frequencies and the development of functional microwave materials have always been among the most active areas in solid-state physics, materials science, electrical and electronic engineering. In recent years, the increasing requirements for the development of high speed, high frequency circuits and systems require complete understanding of the properties of materials function at microwave frequencies. Ferroelectric materials usually have high dielectric constant, and their dielectric properties are temperature and electric field dependent. The change in permittivity as a function of electric field is the key to a wide range of applications. Ferroelectric materials can be used to fabricate capacitors for electronic industry because of their high dielectric constant, and this is important in the trend toward miniaturization and high functionality of electronic products. The simple tunable passive component based on ferroelectric films is a varactor which can be made as a planar structure and used for electrically tunable microwave integrated circuits. It is an important task to sinter highly tunable and low loss ferroelectrics, fabricate and test the properties of microwave ferroelectric components. This thesis shows experimental results on growth, crystalline and microwave properties of Na0.5K0.5NbO3 (NKN), AgTa0.5Nb0.5O3 (ATN), Ba0.5Sr0.5TiO3 (BST) as well as AgTaO3 (ATO), and AgNbO3 (ANO) thin films. The films were grown by Pulsed Laser Deposition (PLD) and rf-magnetron sputtering techniques from stoichiometric high density ceramic NKN, ATN, ATO, ANO and BST targets onto LaAlO3 (LAO), Al2O3 (r-cut sapphire), Nd:YAlO3 single crystals and amorphous glass substrates. Advanced X-ray diffraction examinations showed NKN, ATN, BST films on LAO substrates grow epitaxially, whereas films on r-cut sapphire were found to be preferentially (00l) oriented. Coplanar waveguide 2 µm finger gap interdigital capacitor (CPWIDC) structures were fabricated by photolithography process and metal lift-off technique. On-wafer tests up to 40 GHz were performed to characterize microwave properties of the ferromagnetic film CPWIDC devices. The measurement setup is composed of network analyzer, probe station, and microwave G-S-G probes. External electric field was applied to planar capacitors to measure tunability. Original de-embedding technique has been developed to calculate capacitance, loss tan δ, and tunability of varactors from the measured S-parameters. NKN film interdigital capacitors on Nd:YAlO3 showed superior performance compared to ATN in the microwave range from 1 to 40 GHz. Within this range, the voltage tunability (40V, 200 kV/cm) was about 29%, loss tangent ~ 0.13, K-factor = tunability/tan δ from 152% @ 10GHz to 46% @ 40GHz. The ATN/sapphire CPWIDCs showed the lowest dispersion ~ 4.3% in whole frequency range from 1 to 40 GHz, voltage tunability 4.7% @ 20GHz and 200 kV/cm, lowest loss tangent ~ 0.068 @ 20GHz, K-factor = tunability/tan δ ranged from 124% @ 10GHz to 35% @ 40GHz. BST film CPWIDCs on sapphire showed frequency about 17%, the highest voltage tunability ~ 22.2%, loss tangent ~ 0.137 @ 20GHz, and K-factor = 281% @ 10GHz to 95% @ 40GHz.
|
|
