| 1. |
- Wolkeba, Zewdneh Genene, 1983, et al.
(författare)
-
Recent Advances in the Synthesis of Conjugated Polymers for Supercapacitors
- 2024
-
Ingår i: Advanced Materials Technologies. - 2365-709X. ; 9:9
-
Forskningsöversikt (refereegranskat)abstract
- Conjugated polymers have attracted growing attention for versatile applications in energy storage due to their potential benefits including low-cost processing, molecular tunability, environmental benignity, and high mechanical flexibility. In particular, polymer-based organic electrode materials have shown significant progress in supercapacitor (SC) applications with superior electrochemical behaviors. The performances of SCs are closely related to the intrinsic characteristics of different polymers in the nanoscale and the morphological features of the polymer-based electrode materials obtained by different fabrication techniques in the macroscale. This review summarizes the design and synthesis of both p-type and n-type conjugated polymers, highlighting the pros and cons of three synthesis techniques: electrochemical polymerization, chemical polymerization, and in situ polymerization. The performances of conjugated polymers in SCs, their cycling stabilities, and structure-performance relationships are discussed. Moreover, the existing challenges and future directions of polymer-based SCs are considered with respect to energy density, stability, and large-scale production to promote commercialization.
|
|
| 2. |
- Chen, Qiaonan, 1992, et al.
(författare)
-
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells
- 2022
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Highlights: A series of non-conjugated acceptor polymers with flexible conjugation-break spacers (FCBSs) of different lengths were synthesized.The effect of FCBSs length on solubility of the acceptor polymers, and their photovoltaic and mechanical properties in all-polymer solar cells were explored.This work provides useful guidelines for the design of semiconducting polymers by introducing FCBS with proper length, which can giantly improved properties that are not possible to be achieved by the state-of-the-art fully conjugated polymers. Abstract: All-polymer solar cells (all-PSCs) possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing. Introducing flexible conjugation-break spacers (FCBSs) into backbones of polymer donor (PD) or polymer acceptor (PA) has been demonstrated as an efficient approach to enhance both the photovoltaic (PV) and mechanical properties of the all-PSCs. However, length dependency of FCBS on certain all-PSC related properties has not been systematically explored. In this regard, we report a series of new non-conjugated PAs by incorporating FCBS with various lengths (2, 4, and 8 carbon atoms in thioalkyl segments). Unlike common studies on so-called side-chain engineering, where longer side chains would lead to better solubility of those resulting polymers, in this work, we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length (i.e., C2) in PA named PYTS-C2. Its all-PSC achieves a high efficiency of 11.37%, and excellent mechanical robustness with a crack onset strain of 12.39%, significantly superior to those of the other PAs. These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs, providing an effective strategy to fine-tune the structures of PAs for highly efficient and mechanically robust PSCs.[Figure not available: see fulltext.]
|
|
| 3. |
- Filate, Tadele Tamenu, 1994, et al.
(författare)
-
Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene-Quinoxaline Polymers
- 2024
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 16:10, s. 12886-12896
-
Tidskriftsartikel (refereegranskat)abstract
- Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼−5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N′-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC
|
|
| 4. |
- Filate, Tadele Tamenu, 1994, et al.
(författare)
-
Hydrophilic Conjugated Polymers for Sustainable Fabrication of Deep-Red Light-Emitting Electrochemical Cells
- 2024
-
Ingår i: Advanced Materials Technologies. - : John Wiley & Sons. - 2365-709X. ; 9:3
-
Tidskriftsartikel (refereegranskat)abstract
- It is crucial to develop functional electronic materials that can be processed from green solvents to achieve environmentally sustainable and cost-efficient printing fabrication of organic electronic devices. Here, the design and cost-efficient synthesis of two hydrophilic and emissive conjugated polymers, TQ-OEG and TQ2F-OEG, are presented, which are rendered hydrophilic through the grafting of oligo(ethylene glycol) (OEG) solubilizing groups onto the thiophene-quinoxaline conjugated backbone and thereby can be processed from a water:ethanol solvent mixture. It is shown that the introduction of the OEG groups enables for a direct dissolution of salts by the neat polymer for the attainment of solid-state ion mobility. These properties are utilized for the design and development of light-emitting electrochemical cells (LECs), the active materials of which can be solution cast from a water:ethanol-based ink. It is specifically shown that such an LEC device, comprising an optimized blend of the TQ2F-OEG emitter and a Li salt as the active material positioned between two air-stabile electrodes, delivers deep-red emission (peak wavelength = 670 nm) with a radiance of 185 µW m−2 at a low drive voltage of 2.3 V. This study contributes relevant information as to how polymers and LEC devices can be designed and fabricated to combine functionality with sustainability.
|
|
| 5. |
- Haigh, Paul Anthony, et al.
(författare)
-
Experimental demonstration of staggered cap modulation for low bandwidth red-emitting polymer-LED based visible light communications
- 2019
-
Ingår i: 2019 IEEE International Conference on Communications Workshops, ICC Workshops 2019 - Proceedings.
-
Konferensbidrag (refereegranskat)abstract
- © 2019 IEEE. In this paper we experimentally demonstrate, for the first time, staggered carrier-less amplitude and phase (sCAP) modulation for visible light communication systems based on polymer light-emitting diodes emitting at ∼639 nm. The key advantage offered by sCAP in comparison to conventional multiband CAP is its full use of the available spectrum. In this work, we compare sCAP, which utilises four orthogonal filters to generate the signal, with a conventional 4-band multi-CAP system and on-off keying (OOK). We transmit each modulation format with equal energy and present a record un-coded transmission speed of ∼6 Mb/s. This represents gains of 25% and 65% over the achievable rate using 4-CAP and OOK, respectively.
|
|
| 6. |
- Jalan, Ishita, 1991-, et al.
(författare)
-
Donor-acceptor polymer complex formation in solution confirmed by spectroscopy and atomic-scale modelling
- 2023
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 11:27, s. 9316-9326
-
Tidskriftsartikel (refereegranskat)abstract
- In all-polymer solar cells, high performance is attributed to the fine-grained morphology of the film in the active layer. However, the mechanism by which this fine-grained morphology is achieved remains unknown. Polymeric non-fullerene acceptors have the potential to restrict the self-aggregation, typical of non-fullerene small molecule acceptors. Here we employed a blend of the polymeric acceptor PF5-Y5 and the donor polymer PBDB-T to investigate the balance between molecular interactions in solution. Temperature-dependent absorption spectra show evidence of temperature-induced disaggregation of both donor and acceptor polymers, where the donor polymer disaggregation depends on the solvent polarity. Concentration-dependent fluorescence spectra of blend solutions display blue-shifted acceptor emission upon dilution, similar to that observed in acceptor solutions, and a decreased tendency for charge transfer from donor to acceptor upon dilution. Excitation spectra of dilute blend solutions contain an increased contribution to the long-wavelength acceptor emission, as compared to pure acceptor solutions, from a chromophore that absorbs in a region where the donor does not absorb. These observations can be explained by donor-acceptor complexation in dilute blend solutions, that is stabilized in more polar solvents. Moreover, the near IR-region of the absorption spectrum could be matched with the calculated electronic excitations of donor-acceptor complexes of PBDB-T and PF5-Y5 oligomers. The results corroborate that the interaction between segments of the donor and acceptor polymer chains favours the formation of donor-acceptor charge transfer complexes, stabilized by hybridization of the molecular orbitals, which reduces the electronic energy. The proposed donor-acceptor complex formation competes with the donor and acceptor self-aggregation and is influenced by the solvent environment. These pre-formed donor-acceptor complexes in low-concentration solutions can be expected to have important consequences on the film morphology of all-polymer blends. The results from this joint experimental-theoretical spectroscopy study provide insights that can guide the design of compatible donor and acceptor polymers for future high-performance organic solar cells.
|
|
| 7. |
- Nchinda, Leonato Tambua, et al.
(författare)
-
Unveiling the thermal stability of diketopyrrolopyrrole-based terpolymers: a key element for enhanced efficiency and stability of organic solar cells
- 2024
-
Ingår i: New Journal of Chemistry. - 1369-9261 .- 1144-0546. ; 48:22, s. 10201-10212
-
Tidskriftsartikel (refereegranskat)abstract
- With the advent of novel polymers, organic solar cell (OSC) research has evolved significantly over the past decade. The molecular engineering of terpolymers has allowed for simple morphological control in binary devices over ternary blends, with the highest power conversion efficiencies (PCEs) exceeding 18%. However, research on the stability of OSCs is still lagging behind. In this regard, we examined the thermal stability of a series of terpolymers comprising one electron donor (thienyl-substituted benzodithiophene, BDTT) and two types of electron acceptors namely fluorobenzotriazole (FTAZ) and thienothiophene-capped diketopyrrolopyrrole (TTDPP) and their blends with PC71BM. The terpolymers demonstrated broad absorbance ranging from below 350 nm to 900 nm. The thermal stability of the terpolymers was investigated as pristine thin films and as bulk heterojunction (BHJ) films of the terpolymers blended with PC71BM by heating at 85 °C. We observed that thermal degradation had no sizeable effect on the properties of the pristine terpolymers while the blended films demonstrated significant changes in their morphology due to the inclusion and aggregation of PC71BM. After thermal annealing at 85 °C, the width of the symmetric C=C stretching Raman mode and the C=C/C-C intensity ratio of pristine terpolymers and terpolymer:PC71BM thin films revealed that incorporation of the FTAZ acceptor improves the thermal stability of the BHJ active layers. Furthermore, prolonged thermal annealing times (>3 hours) resulted in the development of PC71BM aggregates and terpolymer decomposition with no evident changes in the molecular and chemical structure of the terpolymers. Our findings indicate that by gradually annealing the blended films using an appropriate annealing time, the diffusion of PC71BM molecules to form aggregates can be carefully regulated, resulting in a nanostructure critical to the efficiency of organic solar cells.
|
|
| 8. |
- Negash, Asfaw, et al.
(författare)
-
Exploring the High-Temperature Window of Operation for Organic Photovoltaics: A Combined Experimental and Simulations Study
- 2024
-
Ingår i: Advanced Materials for Optics and Electronics. - 1616-301X .- 1616-3028. ; 34:6
-
Tidskriftsartikel (refereegranskat)abstract
- The global climate change negatively affects the photovoltaic performance of traditional solar cell technologies. This article investigates the potential of organic photovoltaics (OPV) for high-temperature environments, ranging from urban hot summers (30—40 °C) and desert regions (65 °C) up to (aero) space conditions (130 °C), the thermal window in which OPV can operate. The approach is based on a combination of experiments and simulations up to 180 °C, moving significantly beyond the conventional temperature ranges reported in the literature. New 2H-benzo[d][1,2,3]triazole-5,6-dicarboxylic imide-based copolymers with decomposition onset temperatures above 340 °C are used for this study, in combination with non-fullerene acceptors. Contrary to their inorganic counterparts, OPV devices show a positive temperature coefficient up to ≈90 °C. At temperatures of 150 °C, they are still operational, retaining their room temperature efficiency. Complementary simulations are performed using an in-house developed software package that numerically solves the drift-diffusion equations to understand the general trends in the obtained current–voltage characteristics and the materials’ intrinsic behavior as a function of temperature. The presented methodology of combined high-temperature experiments and simulations can be further applied to investigate the thermal window of operation for other OPV material systems, opening novel high-temperature application routes.
|
|
| 9. |
- Peng, Wenhong, et al.
(författare)
-
Over 18% ternary polymer solar cells enabled by a terpolymer as the third component
- 2022
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 92
-
Tidskriftsartikel (refereegranskat)abstract
- “Ternary blending” and “random terpolymerization” strategies have both proven effective for enhancing the performance of organic solar cells (OSCs). However, reports on the combination of the two strategies remain rare. Here, a terpolymer PM6-Si30 was constructed by inserting chlorine and alkylsilyl-substituted benzodithiophene (BDT) unit (0.3 equivalent) into the state-of-the-art polymer PM6. The terpolymer exhibitsadeep highest-occupied-molecular-orbital energy and good miscibility with both PM6 and BTP-eC9 (C9) and enables its use as a third component into PM6:PM6-Si30:C9 bulk-heterojunction for OSCs. The resulting cells exhibit maximum power conversion efficiency (PCE) of 18.27%, which is higher than that obtained for the optimized control binary PM6:C9-based OSC (17.38%). The enhanced performance of the PM6:PM6-Si30:C9 cells is attributed to improved charge transport, favorable molecular arrangement, reduced energy loss and suppressed bimolecular recombination. The work demonstrates the potential of random terpolymer as a third component in OSCs and highlights a new strategy for the construction of a ternary system with improved photovoltaic performance.
|
|
| 10. |
- Prasad, Suraj, et al.
(författare)
-
Photostability of Y-type electron acceptor molecules and related copolymer
- 2023
-
Ingår i: Proceedings Volume 12660, Organic, Hybrid, and Perovskite Photovoltaics XXIV. - : SPIE - The International Society for Optics and Photonics. ; 12660
-
Konferensbidrag (refereegranskat)abstract
- The lifetime of organic solar cells critically depends on the photochemical stability of the materials. To shed light on the photostability of novel Y-series electron acceptors, we investigate the evolution of optical properties and composition during one-sun illumination in ambient atmosphere of thin films of the small-molecule acceptor Y5 and its copolymers PF5-Y5 and PYT. We employ UV-vis, Fourier-transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS), to assess changes in these properties as a function of illumination time. UV-Vis spectra show that PF5-Y5 undergoes rapid photobleaching, while the Y5 spectrum remains essentially unaffected even after 30 hours of exposure. The absorption spectrum of PYT, which contains a different co-mer than PF5-Y5, is only weakly affected. XPS C1s spectra of the PF5- Y5 film show a decreasing main peak and the development of a new component after 30 hours exposure, while the Y5 film surface composition remained intact. The photodegradation products of PF5-Y5 are characterized by the presence of new carbonyl groups, emerging as absorption bands in the FTIR spectra, while such spectral changes are absent for the Y5 film, indicating that Y5 is resistant to photooxidation, while PF5-Y5 undergoes photochemical reactions. The faster photodegradation of PF5-Y5 compared to Y5 and PYT raises the question about the role of the copolymer’s BDT moiety in the photooxidation. These new insights on the dependence of the photostability of acceptor molecules on their molecular structure are expected to contribute to the design of stable acceptor copolymers for organic solar cells with long operational lifetimes.
|
|
| 11. |
- Tegegne, Newayemedhin A., et al.
(författare)
-
Tailoring intra-molecular coupling in BDT-based copolymers to enhance their performance in fullerene-free organic solar cells
- 2023
-
Ingår i: Materials Advances. - 2633-5409. ; 4:24, s. 6694-6703
-
Tidskriftsartikel (refereegranskat)abstract
- Three copolymers based on a 4,8-bis(4,5-dioctylthiophen-2-yl)benzo[1,2-b:4,5-b ']dithiophene (BDTT) donor unit coupled with 6-(2-ethylhexyl)-5H-[1,2,5]thiadiazolo[3,4-f]isoindole-5,7(6H)-dione (P1), 6-octyl-4,8-di(thiophen-2-yl)-5H-[1,2,5]thiadiazolo[3,4-f]isoindole-5,7(6H)-dione (P2) and 2-(2-ethylhexyl)-6-octyl-4,8-di(thiophen-2-yl)-[1,2,3]triazolo[4,5-f]isoindole-5,7(2H,6H)-dione (P3) acceptors were computationally designed and experimentally synthesized to tailor the intramolecular coupling in their backbone. A considerable decrease in distortion energy in P2 compared to P1 proved the major role of the pi-spacer in the copolymer in releasing steric strain. In comparison to the [1,2,3]triazolo[4,5-f]isoindole-5,7(2H,6H)-dione-based copolymer, P3, the lower electrostatic potential (ESP) of the [1,2,5]thiadiazolo[3,4-f]isoindole-5,7(6H)-dione acceptor in P1 has been observed to shift its LUMO energy level by about 0.5 eV. Furthermore, the electron donating properties of the copolymers increased in the order of P1 < P2 < P3 due to the synergistic contribution of each unit rather than a single unit, confirming the importance of tailoring the intramolecular coupling to control the electro-optical properties of the copolymers. Finally, the copolymer with a poorer electron acceptor unit (P3) was found to exhibit complementary absorption with the non-fullerene acceptor, ITIC, yielding a PCE of 8.87% in solar cell devices, further demonstrating the relevance of each unit in the copolymer intramolecular coupling.
|
|
| 12. |
- Tejerina, Lara, et al.
(författare)
-
A porphyrin pentamer as a bright emitter for NIR OLEDs
- 2022
-
Ingår i: Journal of Materials Chemistry C. - : Royal Society of Chemistry (RSC). - 2050-7534 .- 2050-7526. ; 10:15, s. 5929-5933
-
Tidskriftsartikel (refereegranskat)abstract
- The Luminescence and electroluminescence of an ethyne-Linked zinc(II) porphyrin pentamer have been investigated, by testing blends in two different conjugated polymer matrices, at a range of concentrations. The best results were obtained for blends with the conjugated polymer PIDT-2TPD, at a porphyrin loading of 1 wt%. This host matrix was selected because the excellent overlap between its emission spectrum and the low-energy region of the absorption spectrum of the porphyrin oligomer leads to efficient energy transfer. Thin films of this blend exhibit intense fluorescence in the near-infrared (NIR), with a peak emission wavelength of 886 nm and a photoluminescent quantum yield (PLQY) of 27% in the solid state. Light-emitting diodes (LEDs) fabricated with this blend as the emissive layer achieve average external quantum efficiencies (EQE) of 2.0% with peak emission at 830 nm and a turn-on voltage of 1.6 V. This performance is remarkable for a singlet NIR-emitter; 93% of the photons are emitted in the NIR (lambda > 700 nm), indicating that conjugated porphyrin oligomers are promising emitters for non-toxic NIR OLEDs.
|
|
| 13. |
- Waketola, Alemayehu G., et al.
(författare)
-
Embedding plasmonic gold nanoparticles in a ZnO layer enhanced the performance of inverted organic solar cells based on an indacenodithieno[3,2-b]thiophene-alt-5,5'-di(thiophen-2-yl)-2,2'-bithiazole-based push-pull polymer
- 2023
-
Ingår i: RSC Advances. - 2046-2069. ; 13:24, s. 16175-16184
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, plasmonic nanoparticles (NPs) have attracted considerable attention as good candidates for enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs) owing to their localized surface plasmon resonance (LSPR). In this study, the effect of embedding colloidal gold nanoparticles (cAu NPs) in the ZnO electron transport layer (ETL) on the PCEs of wide band gap polymer-based inverted OSCs was investigated. The active layer was composed of a bulk heterojunction of conjugated polymer based on indacenodithieno[3,2-b]thiophene and 5,5'-di(thiophen-2-yl)-2,2'-bithiazole PIDTT-DTBTz as a donor and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an acceptor. The PCE of the reference device was improved by 22% when 10 wt% cAu NPs were embedded in the ZnO ETL. The short circuit current density (J(SC)) and fill factor (FF) were the main photovoltaic parameters contributing to the PCE enhancement. An improved absorption in the active layer due to the LSPR of cAu NPs as well as efficient exciton dissociation and charge collection were found to be the reasons for the enhanced J(SC) while the increase in FF was mainly due to the suppressed traps and improved conductivity of the ZnO layer by the NPs.
|
|
| 14. |
- Waketola, Alemayehu G., et al.
(författare)
-
Enhancing the Performance of Wide-Bandgap Polymer-Based Organic Solar Cells through Silver Nanorod Integration
- 2023
-
Ingår i: ACS Omega. - 2470-1343. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- Light trapping induced by the introduction of metallic nanoparticles has been shown to improve photo absorption in organic solar cells (OSCs). Researchers in the fields of plasmonics and organic photovoltaics work together to boost sunlight absorption and photon-electron interactions in order to improve device performance. In this contribution, an inverted OSC was fabricated by using indacenodithieno[3,2-b]thiophene-alt-2,2′-bithiazole (PIDTT-BTz) as a wide-band gap donor copolymer and (6,6)-phenyl-C71-butyric acid methyl ester (PC71BM) as an acceptor. Silver nanorods (Ag-NRs), synthesized by precipitation method, were embedded in the active layer of the solar cell. The device fabricated with 1 wt % Ag-NRs in the active layer showed a 26% improvement in power conversion efficiency (PCE) when exposed to 100 mW/cm2 simulated solar illumination. The role of Ag-NRs in the performance improvement of the OSCs was analyzed systematically using morphological, electrical, and optical characterization methods. The light trapping and exciton generation were improved due to the localized surface plasmon resonance (LSPR) activated in Ag-NRs in the form of longitudinal and transverse modes. The photoactive layers (PIDTT-BTz:PC71BM) with the incorporation of 0.5 and 1 wt % Ag-NR showed increased absorption, while the absorption with 1.5 wt % Ag-NRs appeared to be reduced in the wavelength range from 400 to 580 nm. Ag-NRs play a favorable role in exciton photogeneration and dissociation due to the two LSPR modes generated by the Ag-NRs. In the optimized device, the short-circuit current density (JSC) increased from 11.92 to 14.25 mA/cm2, resulting in an increase in the PCE from 3.94 to 4.93%, which is attributed to the improved light-trapping by LSPR using Ag-NRs.
|
|
| 15. |
- Wolkeba, Zewdneh Genene, 1983, et al.
(författare)
-
Polymer Acceptors with Flexible Spacers Afford Efficient and Mechanically Robust All-Polymer Solar Cells
- 2022
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 34:6
-
Tidskriftsartikel (refereegranskat)abstract
- High efficiency and mechanical robustness are both crucial for the practical applications of all-polymer solar cells (all-PSCs) in stretchable and wearable electronics. In this regard, a series of new polymer acceptors (PAs) is reported by incorporating a flexible conjugation-break spacer (FCBS) to achieve highly efficient and mechanically robust all-PSCs. Incorporation of FCBS affords the effective modulation of the crystallinity and pre-aggregation of the PAs, and achieves the optimal blend morphology with polymer donor (PD), increasing both the photovoltaic and mechanical properties of all-PSCs. In particular, an all-PSC based on PYTS-0.3 PA incorporated with 30% FCBS and PBDB-T PD demonstrates a high power conversion efficiency (PCE) of 14.68% and excellent mechanical stretchability with a crack onset strain (COS) of 21.64% and toughness of 3.86 MJ m-3, which is significantly superior to those of devices with the PA without the FCBS (PYTS-0.0, PCE = 13.01%, and toughness = 2.70 MJ m-3). To date, this COS is the highest value reported for PSCs with PCEs of over 8% without any insulating additives. These results reveal that the introduction of FCBS into the conjugated backbone is a highly feasible strategy to simultaneously improve the PCE and stretchability of PSCs.
|
|
| 16. |
- Wu, Jingnan, 1994, et al.
(författare)
-
On the Conformation of Dimeric Acceptors and Their Polymer Solar Cells with Efficiency over 18 %
- 2023
-
Ingår i: Angewandte Chemie International Edition. - : John Wiley & Sons. - 1433-7851 .- 1521-3773.
-
Tidskriftsartikel (refereegranskat)abstract
- The determination of molecular conformations of oligomeric acceptors (OAs) and their impact on molecular packing are crucial for understanding the photovoltaic performance of their resulting polymer solar cells (PSCs) but have not been well studied yet. Herein, we synthesized two dimeric acceptor materials, DIBP3F-Se and DIBP3F-S, which bridged two segments of Y6-derivatives by selenophene and thiophene, respectively. Theoretical simulation and experimental 1D and 2D NMR spectroscopic studies prove that both dimers exhibit O-shaped conformations other than S- or U-shaped counter-ones. Notably, this O-shaped conformation is likely governed by a distinctive "conformational lock" mechanism, arising from the intensified intramolecular & pi;-& pi; interactions among their two terminal groups within the dimers. PSCs based on DIBP3F-Se deliver a maximum efficiency of 18.09 %, outperforming DIBP3F-S-based cells (16.11 %) and ranking among the highest efficiencies for OA-based PSCs. This work demonstrates a facile method to obtain OA conformations and highlights the potential of dimeric acceptors for high-performance PSCs.
|
|
| 17. |
- Yao, Nannan, et al.
(författare)
-
In Situ Study the Dynamics of Blade-Coated All-Polymer Bulk Heterojunction Formation and Impact on Photovoltaic Performance of Solar Cells
- 2023
-
Ingår i: Solar RRL. - : John Wiley & Sons. - 2367-198X. ; , s. 1-8
-
Tidskriftsartikel (refereegranskat)abstract
- All-polymer solar cells (all-PSCs) have achieved impressive progress by employing acceptors polymerized from well performing small-molecule non-fullerene acceptors. Herein, the device performance and morphology evolution in blade-coated all-PSCs based on PBDBT:PF5–Y5 blends prepared from two different solvents, chlorobenzene (CB), and ortho-xylene (o-XY) are studied. The absorption spectra in CB solution indicate more ordered conformation for PF5–Y5. The drying process of PBDBT:PF5–Y5 blends is monitored by in situ multifunctional spectroscopy and the final film morphology is characterized with ex situ techniques. Finer-mixed donor/acceptor nanostructures are obtained in CB-cast film than that in o-XY-cast ones, corresponding to more efficient charge generation in the solar cells. More importantly, the conformation of polymers in solution determines the overall film morphology and the device performance. The relatively more ordered structure in CB-cast films is beneficial for charge transport and reduced non-radiative energy loss. Therefore, to achieve high-performance all-PSCs with small energy loss, it is crucial to gain favorable aggregation in the initial stage in solution.
|
|
