| 1. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 2. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 3. |
- Deng, Ya-Li, et al.
(författare)
-
The feasibility of mode control in rotating detonation engine
- 2018
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311. ; 129, s. 1538-1550
-
Tidskriftsartikel (refereegranskat)abstract
- The feasibility of mode control in rotating detonation engine is investigated through regulating the global equivalence ratio during the test under different air mass flow rates, chamber lengths, and blockage ratios at the exit, including the mode transitions between the single wave and two co-rotating waves, two counter-rotating waves and longitudinal pulsed detonation, two co-rotating waves and longitudinal pulsed detonation. The rotating detonation wave propagating in the mixture with fuel concentration gradients under single wave mode is also tested. The results show that, the rotating detonation wave has the ability to adapt itself to the changing of equivalence ratio. The decreasing of the equivalence ratio leads to the poor reactivity of mixtures, which decreases the wave speed under the single wave mode, and results in the transition from two co-rotating waves to single wave. The increasing of the chamber length decreases the critical equivalence ratio for the emergence of longitudinal pulsed detonation. Increasing the chamber length leads to the transition from two counter-rotating waves to longitudinal pulsed detonation at relatively low equivalence ratio. This paper demonstrates the feasibility of mode control in rotating detonation engine, and promotes the application of rotating detonation engine.
|
|
| 4. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2017 challenge results
- 2017
-
Ingår i: 2017 IEEE INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2017). - : IEEE. - 9781538610343 ; , s. 1949-1972
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2017 is the fifth annual tracker benchmarking activity organized by the VOT initiative. Results of 51 trackers are presented; many are state-of-the-art published at major computer vision conferences or journals in recent years. The evaluation included the standard VOT and other popular methodologies and a new "real-time" experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The VOT2017 goes beyond its predecessors by (i) improving the VOT public dataset and introducing a separate VOT2017 sequestered dataset, (ii) introducing a realtime tracking experiment and (iii) releasing a redesigned toolkit that supports complex experiments. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 5. |
- Zhou, Jukai, et al.
(författare)
-
Graphene oxide-based polyethersulfone core-shell particles for dye uptake
- 2016
-
Ingår i: RSC ADVANCES. - : Royal Society of Chemistry. - 2046-2069. ; 6:104, s. 102389-102397
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene oxide (GO), a graphene nanomaterial with great application potential, possesses promising adsorption abilities towards various water contaminants due to the ultra-large surface area and the nature of electric charge on the surface. However, ultrahigh centrifugation for a prolonged time is strongly needed to collect the highly dispersed GO in the recovery process. In this study, a GO-based polymeric composite particle with core-shell structure was fabricated by a facile method. Polyethersulfone (PES) was chosen as the shell to enwrap GO through a liquid-liquid phase inversion process, since the PES shell presented high porosity, good mechanical property and easily modified ability. Methylene blue (MB), a cationic dye, was chosen as the adsorbate to investigate the adsorption capabilities, kinetics and isotherms of the prepared particles. The PES@GO core-shell particles displayed an adsorption capacity as high as 352.11 mg g(-1) for MB dye, and the adsorption rates could be improved by modifying the PES shells with hydrophilic fillers. The MB adsorption behavior fitted the pseudo-second- order kinetic model and the Langmuir isotherm very well, and the adsorption process was controlled by the intra-particle diffusion. In addition, a particle column was used to further study the removal ability of environmental toxins, and the results revealed that the composite particles had great potential to remove cationic dyes for wastewater treatment on an industrial scale.
|
|
