| 1. |
- Chen, Pohua, et al.
(author)
-
Stabilization of Extra-Large-Pore Zeolite by Boron Substitution for the Production of Commercially Applicable Catalysts
- 2022
-
In: Chemistry - A European Journal. - : Wiley. - 0947-6539 .- 1521-3765. ; 28:63
-
Journal article (peer-reviewed)abstract
- Stable extra-large-pore zeolites are desirable for industrial purposes due to their ability to accommodate bulky reactants and diffusion through channels. Although there are several extra-large pore zeolites reported, stable ones are rare. Thus, their stabilization is a feasible strategy for industrial applications. Here, an extra-large-pore zeolite EWT with boron substitution is presented, and the resulting zeolite B-RZM-3 increased the thermal stability from 600 °C in its silica form to 850 °C. The crystal structure, determined by combining continuous rotation electron diffraction (cRED) and powder X-ray diffraction (PXRD), shows that B atoms preferentially substitute the interrupted (HO)T(OT)3 (Q3) sites and are partially converted into 3-coordination to relax framework deformation upon heating. After Al-reinsertion post-treatment, Al-B-RZM-3 shows higher ethylbenzene selectivity and ethylene conversion rate per mol acid site than commercial ZSM-5 and Beta zeolite in benzene alkylation reaction. Synthesizing extra-large-pore zeolite in borosilicate form is a potential approach to stabilize interrupted zeolites for commercial applications.
|
|
| 2. |
- Ge, Meng, 1993-, et al.
(author)
-
Direct Location of Organic Molecules in Framework Materials by Three-Dimensional Electron Diffraction
- 2022
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 144:33, s. 15165-15174
-
Journal article (peer-reviewed)abstract
- In the study of framework materials, probing interactions between frameworks and organic molecules is one of the most important tasks, which offers us a fundamental understanding of host–guest interactions in gas sorption, separation, catalysis, and framework structure formation. Single-crystal X-ray diffraction (SCXRD) is a conventional method to locate organic species and study such interactions. However, SCXRD demands large crystals whose quality is often vulnerable to, e.g., cracking on the crystals by introducing organic molecules, and this is a major challenge to use SCXRD for structural analysis. With the development of three-dimensional electron diffraction (3D ED), single-crystal structural analysis can be performed on very tiny crystals with sizes on the nanometer scale. Here, we analyze two framework materials, SU-8 and SU-68, with organic molecules inside their inorganic crystal structures. By applying 3D ED, with fast data collection and an ultralow electron dose (0.8–2.6 e– Å–2), we demonstrate for the first time that each nonhydrogen atom from the organic molecules can be ab initio located from structure solution, and they are shown as distinct and well-separated peaks in the difference electrostatic potential maps showing high accuracy and reliability. As a result, two different spatial configurations are identified for the same guest molecule in SU-8. We find that the organic molecules interact with the framework through strong hydrogen bonding, which is the key to immobilizing them at well-defined positions. In addition, we demonstrate that host–guest systems can be studied at room temperature. Providing high accuracy and reliability, we believe that 3D ED can be used as a powerful tool to study host–guest interactions, especially for nanocrystals.
|
|
| 3. |
- Jaradat, Ahmad, et al.
(author)
-
A High-Rate Li–CO2 Battery Enabled by 2D Medium-Entropy Catalyst
- 2023
-
In: Advanced Functional Materials. - 1616-301X .- 1616-3028. ; 33:21
-
Journal article (peer-reviewed)abstract
- Lithium-air batteries based on CO2 reactant (Li–CO2) have recently been of interest because it has been found that reversible Li/CO2 electrochemistry is feasible. In this study, a new medium-entropy cathode catalyst, (NbTa)0.5BiS3, that enables the reversible electrochemistry to operate at high rates is presented. This medium entropy cathode catalyst is combined with an ionic liquid-based electrolyte blend to give a Li–CO2 battery that operates at high current density of 5000 mA g−1 and capacity of 5000 mAh g−1 for up to 125 cycles, far exceeding reported values in the literature for this type of battery. The higher rate performance is believed to be due to the greater stability of the multi-element (NbTa)0.5BiS3 catalyst because of its higher entropy compared to previously used catalysts with a smaller number of elements with lower entropies. Evidence for this comes from computational studies giving very low surface energies (high surface stability) for (NbTa)0.5BiS3 and transmission electron microscopystudies showing the structure being retained after cycling. In addition, the calculations indicate that Nb-terminated surface promotes Li–CO2 electrochemistry resulting in Li2CO3 and carbon formation, consistent with the products found in the cell. These results open new direction to design and develop high-performance Li–CO2 batteries.
|
|
| 4. |
- Lv, Zhong-Peng, et al.
(author)
-
Visualizing noncovalent interactions and property prediction of submicron-sized charge-transfer crystals from ab-initio determined structures
- 2024
-
In: Small Methods. - 2366-9608.
-
Journal article (peer-reviewed)abstract
- The charge-transfer (CT) interactions between organic compounds are reflected in the (opto)electronic properties. Determining and visualizing crystal structures of CT complexes are essential for the design of functional materials with desirable properties. Complexes of pyranine (PYR), methyl viologen (MV), and their derivatives are the most studied water-based CT complexes. Nevertheless, very few crystal structures of CT complexes have been reported so far. In this study, the structures of two PYRs-MVs CT crystals and a map of the noncovalent interactions using 3D electron diffraction (3DED) are reported. Physical properties, e.g., band structure, conductivity, and electronic spectra of the CT complexes and their crystals are investigated and compared with a range of methods, including solid and liquid state spectroscopies and highly accurate quantum chemical calculations based on density functional theory (DFT). The combination of 3DED, spectroscopy, and DFT calculation can provide important insight into the structure-property relationship of crystalline CT materials, especially for submicrometer-sized crystals.
|
|
| 5. |
- Parmar, Deependra, et al.
(author)
-
Unique Role of GeO2 as a Noninvasive Promoter of Nano-Sized Zeolite Crystals
- 2022
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 34:49
-
Journal article (peer-reviewed)abstract
- The synthesis of zeolites with nano-sized dimensions is often limited to a narrow design space that conventionally relies upon the design of organics to direct hierarchical materials. Here, it is demonstrated that the addition of an inorganic modifier, germanium oxide (GeO2), to a zeolite growth mixture directs the formation of crystals with ultrasmall dimensions. This effect is observed for zeolites ZSM-11 and ZSM-5 over a range of synthesis conditions wherein the role of GeO2 in zeolite crystallization deviates from its typical function as a heteroatom. Notably, the final products contain trace amounts of Ge, which indicates the inorganic modifier does not compete for sites in the zeolite framework based on its formation of a discrete phase that enables GeO2 recovery. Catalytic tests using the methanol-to-hydrocarbons reaction reveal significant enhancement in the performance of zeolite catalysts prepared with GeO2 compared to reported examples of nano-sized zeolites. These findings highlight a potentially generalizable and commercially viable synthesis method to reduce mass-transport limitations in zeolites for diverse applications.
|
|
| 6. |
- Tang, Weiwei, et al.
(author)
-
Tautomerism unveils a self-inhibition mechanism of crystallization
- 2023
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 14:1
-
Journal article (peer-reviewed)abstract
- Modifiers are commonly used in natural, biological, and synthetic crystallization to tailor the growth of diverse materials. Here, we identify tautomers as a new class of modifiers where the dynamic interconversion between solute and its corresponding tautomer(s) produces native crystal growth inhibitors. The macroscopic and microscopic effects imposed by inhibitor-crystal interactions reveal dual mechanisms of inhibition where tautomer occlusion within crystals that leads to natural bending, tunes elastic modulus, and selectively alters the rate of crystal dissolution. Our study focuses on ammonium urate crystallization and shows that the keto-enol form of urate, which exists as a minor tautomer, is a potent inhibitor that nearly suppresses crystal growth at select solution alkalinity and supersaturation. The generalizability of this phenomenon is demonstrated for two additional tautomers with relevance to biological systems and pharmaceuticals. These findings offer potential routes in crystal engineering to strategically control the mechanical or physicochemical properties of tautomeric materials.
|
|
| 7. |
- Wang, Shuxi, et al.
(author)
-
Thermodynamics and Kinetics in Anisotropic Growth of One-Dimensional Midentropy Nanoribbons
- 2023
-
In: ACS Nano. - 1936-0851 .- 1936-086X. ; 17:15, s. 15053-15064
-
Journal article (peer-reviewed)abstract
- One-dimensional (1D) materials demonstrate anisotropic in-plane physical properties that enable a wide range of functionalities in electronics, photonics, valleytronics, optoelectronics, and catalysis. Here, we undertake an in-depth study of the growth mechanism for equimolar midentropy alloy of (NbTaTi)0.33S3 nanoribbons as a model system for 1D transition metal trichalcogenide structures. To understand the thermodynamic and kinetic effects in the growth process, the energetically preferred phases at different synthesis temperatures and times are investigated, and the phase evolution is inspected at a sequence of growth steps. It is uncovered that the dynamics of the growth process occurs at four different stages via preferential incorporation of chemical species at high-surface-energy facets. Also, a sequence of temperature and time dependent nonuniform to uniform phase evolutions has emerged in the composition and structure of (NbTaTi)0.33S3 which is described based on an anisotropic vapor–solid (V–S) mechanism. Furthermore, direct evidence for the 3D structure of the charge density wave (CDW) phase (width less than 100 nm) is provided by three-dimensional electron diffraction (3DED) in individual nanoribbons at cryogenic temperature, and detailed comparisons are made between the phases obtained before and after CDW transformation. This study provides important fundamental information for the design and synthesis of future 1D alloy structures.
|
|
| 8. |
- Wang, Yanzhi, et al.
(author)
-
Anchoring Fe Species on the Highly Curved Surface of S and N Co-Doped Carbonaceous Nanosprings for Oxygen Electrocatalysis and a Flexible Zinc-Air Battery
- 2024
-
In: Angewandte Chemie International Edition. - 1433-7851 .- 1521-3773. ; 63:7
-
Journal article (peer-reviewed)abstract
- Oxygen reduction reaction (ORR) is of critical significance in the advancement of fuel cells and zinc-air batteries. The iron-nitrogen (Fe−Nx) sites exhibited exceptional reactivity towards ORR. However, the task of designing and controlling the local structure of Fe species for high ORR activity and stability remains a challenge. Herein, we have achieved successful immobilization of Fe species onto the highly curved surface of S, N co-doped carbonaceous nanosprings (denoted as FeNS/Fe3C@CNS). The induction of this twisted configuration within FeNS/Fe3C@CNS arose from the assembly of chiral templates. For electrocatalytic ORR tests, FeNS/Fe3C@CNS exhibits a half-wave potential (E1/2) of 0.91 V in alkaline medium and a E1/2 of 0.78 V in acidic medium. The Fe single atoms and Fe3C nanoparticles are coexistent and play as active centers within FeNS/Fe3C@CNS. The highly curved surface, coupled with S substitution in the coordination layer, served to reduce the energy barrier for ORR, thereby enhancing the intrinsic catalytic activity of the Fe single-atom sites. We also assembled a wearable flexible Zn-air battery using FeNS/Fe3C@CNS as electrocatalysts. This work provides new insights into the construction of highly curved surfaces within carbon materials, offering high electrocatalytic efficacy and remarkable performance for flexible energy conversion devices.
|
|
| 9. |
- Yang, Taimin, 1991-
(author)
-
3D Electron Microscopy Methods and Applications : Structures from Atomic Scale to Mesoscale
- 2019
-
Doctoral thesis (other academic/artistic)abstract
- The crystal structure determines the physical properties of a material. The structure can be analysed at different levels, from atomic level, mesoscale level, all the way up to the macroscale level. Transmission Electron Microscope (TEM) is a powerful tool for studying the structure of materials at atomic scale level and mesoscale level because of the short wavelength of the electrons. At atomic scale level, structure determination using TEM can be performed in diffraction mode. The recent developments in 3D electron diffraction methods make structure determination from nano- and micron-sized crystals much easier than before. However, due to the strong interactions, electrons can be scattered multiple times through the crystal, causing the measured intensities to be less accurate than that in the X-ray case.In this thesis, we use the continuous rotation electron diffraction (cRED) developed in our group to investigate the structure of materials and the accuracy of this method. In the third chapter, we use cRED method to determine the structure of two aluminophosphate zeolites, PST-13 and PST-14. We presented that these structures can be built from two pairs of enantiomeric structural building units. In the fourth chapter, we show that despite the inaccuracy in measured intensities originated from dynamical effect, it is still possible to determine the structure accurately. We show that the atomic coordinates of ZSM-5 and sucrose crystal structure determined by multiple electron diffraction datasets is identical to that determined from X-ray data or neutron data. We also assessed the linearity between calculated structure factor and observed structure factor and use this as a coarse assessment indicator for diffraction data quality for protein crystals.Apart from atomic structure, mesoscale structures, such as mesopores, can also determine the property of materials. For the 3D structures of these nanoscale structures, we can also use TEM electron tomography techniques to investigate. In chapter five, we performed electron tomography for two different materials with mesoporous structure and illustrated the formation mechanism of mesoporous magnesium carbonate and the internal tunnel structure of hierarchical TS-1 zeolite.
|
|
| 10. |
- Yang, Taimin, 1991-, et al.
(author)
-
Improving data quality for three-dimensional electron diffraction by a post-column energy filter and a new crystal tracking method
- 2022
-
In: Journal of applied crystallography. - 0021-8898 .- 1600-5767. ; 55:6, s. 1583-1591
-
Journal article (peer-reviewed)abstract
- Three-dimensional electron diffraction (3D ED) has become an effective technique to determine the structures of submicrometre- (nanometre-)sized crystals. In this work, energy-filtered 3D ED was implemented using a post-column energy filter in both STEM mode and TEM mode [(S)TEM denoting (scanning) transmission electron microscope]. The setups for performing energy-filtered 3D ED on a Gatan imaging filter are described. The technique and protocol improve the accessibility of energy-filtered 3D ED post-column energy filters, which are available in many TEM laboratories. In addition, a crystal tracking method in STEM mode using high-angle annular dark-field imaging is proposed. This method enables the user to monitor the crystal position while collecting 3D ED data at the same time, allowing a larger tilt range without foregoing any diffraction frames or imposing extra electron dose. In order to compare the differences between energy-filtered and unfiltered 3D ED data sets, three well known crystallized inorganic samples have been studied in detail. For these samples, the final R1 values improved by 10–30% for the energy-filtered data sets compared with the unfiltered data sets, and the structures became more chemically reasonable. Possible reasons for improvement are also discussed.
|
|
| 11. |
- Yang, Taimin, 1991-, et al.
(author)
-
Single-crystal structure determination of nanosized metal–organic frameworks by three-dimensional electron diffraction
- 2022
-
In: Nature Protocols. - : Springer Science and Business Media LLC. - 1754-2189 .- 1750-2799. ; 17:10, s. 2389-2413
-
Journal article (peer-reviewed)abstract
- Metal–organic frameworks (MOFs) have attracted considerable interest due to their well-defined pore architecture and structural tunability on molecular dimensions. While single-crystal X-ray diffraction (SCXRD) has been widely used to elucidate the structures of MOFs at the atomic scale, the formation of large and well-ordered crystals is still a crucial bottleneck for structure determination. To alleviate this challenge, three-dimensional electron diffraction (3D ED) has been developed for structure determination of nano- (submicron-)sized crystals. Such 3D ED data are collected from each single crystal using transmission electron microscopy. In this protocol, we introduce the entire workflow for structural analysis of MOFs by 3D ED, from sample preparation, data acquisition and data processing to structure determination. We describe methods for crystal screening and handling of crystal agglomerates, which are crucial steps in sample preparation for single-crystal 3D ED data collection. We further present how to set up a transmission electron microscope for 3D ED data acquisition and, more importantly, offer suggestions for the optimization of data acquisition conditions. For data processing, including unit cell and space group determination, and intensity integration, we provide guidelines on how to use electron and X-ray crystallography software to process 3D ED data. Finally, we present structure determination from 3D ED data and discuss the important features associated with 3D ED data that need to be considered. We believe that this protocol provides critical details for implementing and utilizing 3D ED as a structure determination platform for nano- (submicron-)sized MOFs as well as other crystalline materials.
|
|
| 12. |
- Zhang, Chengji, et al.
(author)
-
Lithium superoxide-based high rate Li-Air batteries enabled by Di-iridium sulfur bridge active sites
- 2023
-
In: Energy Storage Materials. - 2405-8289 .- 2405-8297. ; 60
-
Journal article (peer-reviewed)abstract
- Li-oxygen (Li-O2) batteries can potentially provide much higher energy density than Li-ion batteries; however, the practical application of these batteries is hindered due to several drawbacks such as low current rates and high overpotential for the charging process. In this paper, we report a novel Li-Air battery system that operates under high current rates (up to 1mAcm 2) with LiO2 as the primary discharge product instead of the commonly reported Li2O2. This LiO2 based battery at high rates is through a combination of an as-synthesized new onedimensional (1D) transition metal trichalcogenide mid-entropy alloy of SnIrS3.6 as a cathode catalyst and an electrolyte blend with a SnI2 bi-functional additive. It is revealed that SnIrS3.6 has a microporous structure composed of six- and five-coordinated metal atoms, forming octahedral and triangular bipyramids which has not been observed in other layered chalcogeide materials. DFT calculations reveal that the SnIrS3.6 structure can result in LiO2 formation through di-iridium sulfur bridge active sites that results in strong binding of O2 and LiO2 preventing disproportionation to Li2O2 and enabling high rates. This finding will open a new perspective in designing advanced LiO2-based Li-O2 batteries for real practices.
|
|
| 13. |
- Zhou, Guojun, 1990-, et al.
(author)
-
Structure determination of a low-crystallinity covalent organic framework by three-dimensional electron diffraction
- 2023
-
In: Communications Chemistry. - 2399-3669. ; 6
-
Journal article (peer-reviewed)abstract
- Covalent organic frameworks (COFs) have been attracting intense research due to their permanent porosity, designable architecture, and high stability. However, COFs are challenging to crystallize and their synthesis often results in tiny crystal sizes and low crystallinities, which hinders an unambiguous structure determination. Herein, we demonstrate that the structure of low-crystallinity COF Py-1P nanocrystals can be solved by coupling three-dimensional electron diffraction (3DED) with simulated annealing (SA). The resulting model is comparable to that obtained from high-crystallinity samples by dual-space method. Moreover, for low-resolution 3DED data, the model obtained by SA shows a better framework than those provided by classic direct method, dual-space method, and charge flipping. We further simulate data with different resolutions to understand the reliability of SA under different crystal quality conditions. The successful determination of Py-1P structure by SA compared to other methods provides new knowledge for using 3DED to analyze low-crystallinity and nanosized materials.
|
|
