| 1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 2. |
|
|
| 3. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Cui, Wen, et al.
(författare)
-
Reversible pressure-induced polymerization of Fe(C5H5)(2) doped C-70
- 2013
-
Ingår i: Carbon. - : Pergamon-Elsevier Science. - 0008-6223 .- 1873-3891. ; 62, s. 447-454
-
Tidskriftsartikel (refereegranskat)abstract
- High pressure Raman, IR and X-ray diffraction (XRD) studies have been carried out on C-70(Fe(C5H5)(2))(2) (hereafter, "C-70(Fc)(2)") sheets. Theoretical calculation is further used to analyze the Electron Localization Function (ELF) and charge transfer in the crystal and thus to understand the transformation of C-70(Fc)(2) under pressure. Our results show that even at room temperature dimeric phase and one dimensional (1D) polymer phase of C-70 molecules can be formed at about 3 and 8 GPa, respectively. The polymerization is found to be reversible Upon decompression and the reversibility is related to the pressure-tuned charge transfer, as well as the overridden steric repulsion of counter ions. According to the layered structure of the intercalated ferrocene molecules formed in the crystal, we suggest that ferrocene acts as not only a spacer to restrict the polymerization of C-70 molecules within a layer, but also as charge reservoir to tune the polymerization process. This supplies a possible way for us to design the polymerization of fullerenes at suitable conditions.
|
|
| 8. |
- Dong, Jiajun, et al.
(författare)
-
Decompression-Induced Diamond Formation from Graphite Sheared under Pressure
- 2020
-
Ingår i: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 124:6
-
Tidskriftsartikel (refereegranskat)abstract
- Graphite is known to transform into diamond under dynamic compression or under combined high pressure and high temperature, either by a concerted mechanism or by a nucleation mechanism. However, these mechanisms fail to explain the recently reported discovery of diamond formation during ambient temperature compression combined with shear stress. Here we report a new transition pathway for graphite to diamond under compression combined with shear, based on results from both theoretical simulations and advanced experiments. In contrast to the known model for thermally activated diamond formation under pressure, the shear-induced diamond formation takes place during the decompression process via structural transitions. At a high pressure with large shear, graphite transforms into ultrastrong sp3 phases whose structures depend on the degree of shear stress. These metastable sp3 phases transform into either diamond or graphite upon decompression. Our results explain several recent experimental observations of low-temperature diamond formation. They also emphasize the importance of shear stress for diamond formation, providing new insight into the graphite-diamond transformation mechanism.
|
|
| 9. |
- Long, Xu, et al.
(författare)
-
Finite Element Analysis to the Constitutive Behavior of Sintered Silver Nanoparticles Under Nanoindentation
- 2018
-
Ingår i: International Journal of Applied Mechanics. - 1758-8251 .- 1758-826X. ; 10:10
-
Tidskriftsartikel (refereegranskat)abstract
- Finite element (FE) simulation is adopted as a fundamental tool to evaluate the mechanical reliability of packaging structures for electronic devices. Nevertheless, the determination of mechanical properties of sintered silver nanoparticles (AgNP) remains challenging as the traditional tensile test is difficult to be performed at a limited size. In the current study, spherical nanoindentation is utilized to measure the applied load-penetration depth responses of sintered AgNP reinforced by SiC microparticles at various weight ratios (0.0, 0.5, 1.0 and 1.5 wt.%). To describe the elasto-plastic behavior of this heterogeneous material, FE analysis is performed to simulate the indentation behavior and determine the parameters in the modified power-law model by fitting the average applied load-penetration depth responses. To overcome the uniqueness problem, the Young's modulus is directly determined by continuous stiffness measurement technique and the proposed constitutive model can provide a reasonably accurate mechanical estimation of sintered AgNP. The effect of SiC content on sintered AgNP is discussed by correlating the morphology observed by scanning electron microscope (SEM) and the constitutive parameters obtained from the FE simulations.
|
|
| 10. |
- Long, Xu, et al.
(författare)
-
Mechanical behaviour of sintered silver nanoparticles reinforced by SiC microparticles
- 2019
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - : Elsevier BV. - 0921-5093. ; 744, s. 406-414
-
Tidskriftsartikel (refereegranskat)abstract
- SiC microparticles with various weight ratios (0.0, 0.5, 1.0 and 1.5 wt%) are incorporated into sintered silver nanoparticles (AgNP) as one of the promising packaging materials for high-power electronic devices. Mechanical properties and constitutive behaviour of sintered AgNP reinforced by SiC microparticles are investigated based on nanoindentation experiment and analytical approach. Nanoindentations were performed in the manner of continuous stiffness measurement for a maximum penetration depth of 2000 nm at a strain rate of 0.05 s−1. Particularly, a Berkovich indenter is utilized to evaluate the values of Young's modulus and hardness, and a spherical indenter is utilized to describe the constitutive behaviour. For sintered AgNP with 0.5 wt% SiC, the morphology exhibits uniformly compact microstructures to enable optimizing the heat conductivity, the yield strength and hardening capacity of sintered AgNP material is enhanced. To describe the constitutive behaviour, an analytical approach is proposed to simulate the indentation behaviour. The parameters in the modified power-law model are determined by fitting the average indentation responses. The developed correlation between microstructure and macroscopic properties facilitates the design of AgNP paste morphology and improves the mechanical properties of sintered AgNP in electronics packaging.
|
|
| 11. |
- Pham, Ngan Hoang, et al.
(författare)
-
Self-Limited Formation of Bowl-Shaped Nanopores for Directional DNA Translocation
- 2021
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 15:11, s. 17938-17946
-
Tidskriftsartikel (refereegranskat)abstract
- Solid-state nanopores of on-demand dimensions and shapes can facilitate desired sensor functions. However, reproducible fabrication of arrayed nanopores of predefined dimensions remains challenging despite numerous techniques explored. Here, bowl-shaped nanopores combining properties of ultrathin membrane and tapering geometry are manufactured using a self-limiting process developed on the basis of standard silicon technology. The upper opening of the bowl-nanopores is 60–120 nm in diameter, and the bottom orifice reaches sub-5 nm. Current-voltage characteristics of the fabricated bowl-nanopores display insignificant rectification indicating weak ionic selectivity, in accordance to numerical simulations showing minor differences in electric field and ionic velocity upon the reversal of bias voltages. Simulations reveal, concomitantly, high-momentum electroosmotic flow downward along the concave nanopore sidewall. Collisions between the left and right tributaries over the bottom orifice drive the electroosmotic flow both up into the nanopore and down out of the nanopore through the orifice. The resultant asymmetry in electrophoretic–electroosmotic force is considered the cause responsible for the experimentally observed strong directionality in λ-DNA translocation with larger amplitude, longer duration, and higher frequencies for the downward movements from the upper opening than the upward ones from the orifice. Thus, the resourceful silicon nanofabrication technology is shown to enable nanopore designs toward enriching sensor applications.
|
|
| 12. |
- Yin, Xiu, et al.
(författare)
-
Doping of charge-transfer molecules in cocrystals for the design of materials with novel piezo-activated luminescence
- 2023
-
Ingår i: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 14:6, s. 1479-1484
-
Tidskriftsartikel (refereegranskat)abstract
- A novel piezo-activated luminescent material with wide range modulation of the luminescence wavelength and a giant intensity enhancement upon compression was prepared using a strategy of molecular doping. The doping of THT molecules into TCNB-perylene cocrystals results in the formation of a weak but pressure-enhanced emission center in the material at ambient pressure. Upon compression, the emissive band from the undoped component TCNB-perylene undergoes a normal red shift and emission quenching, while the weak emission center shows an anomalous blue shift from 615 nm to 574 nm and a giant luminescence enhancement up to 16 GPa. Further theoretical calculations show that doping by THT could modify intermolecular interactions, promote molecular deformation, and importantly, inject electrons into the host TCNB-perylene upon compression, which contributes to the novel piezochromic luminescence behavior. Based on this finding, we further propose a universal approach to design and regulate the piezo-activated luminescence of materials by using other similar dopants.
|
|
| 13. |
- Yu, Wenjin, et al.
(författare)
-
Deep Learning-Based Classification of Cancer Cell in Leptomeningeal Metastasis on Cytomorphologic Features of Cerebrospinal Fluid
- 2022
-
Ingår i: Frontiers in Oncology. - : Frontiers Media SA. - 2234-943X. ; 12, s. 1-11
-
Tidskriftsartikel (refereegranskat)abstract
- Background: It is a critical challenge to diagnose leptomeningeal metastasis (LM), given its technical difficulty and the lack of typical symptoms. The existing gold standard of diagnosing LM is to use positive cerebrospinal fluid (CSF) cytology, which consumes significantly more time to classify cells under a microscope.Objective: This study aims to establish a deep learning model to classify cancer cells in CSF, thus facilitating doctors to achieve an accurate and fast diagnosis of LM in an early stage.Method: The cerebrospinal fluid laboratory of Xijing Hospital provides 53,255 cells from 90 LM patients in the research. We used two deep convolutional neural networks (CNN) models to classify cells in the CSF. A five-way cell classification model (CNN1) consists of lymphocytes, monocytes, neutrophils, erythrocytes, and cancer cells. A four-way cancer cell classification model (CNN2) consists of lung cancer cells, gastric cancer cells, breast cancer cells, and pancreatic cancer cells. Here, the CNN models were constructed by Resnet-inception-V2. We evaluated the performance of the proposed models on two external datasets and compared them with the results from 42 doctors of various levels of experience in the human-machine tests. Furthermore, we develop a computer-aided diagnosis (CAD) software to generate cytology diagnosis reports in the research rapidly.Results: With respect to the validation set, the mean average precision (mAP) of CNN1 is over 95% and that of CNN2 is close to 80%. Hence, the proposed deep learning model effectively classifies cells in CSF to facilitate the screening of cancer cells. In the human-machine tests, the accuracy of CNN1 is similar to the results from experts, with higher accuracy than doctors in other levels. Moreover, the overall accuracy of CNN2 is 10% higher than that of experts, with a time consumption of only one-third of that consumed by an expert. Using the CAD software saves 90% working time of cytologists.Conclusion: A deep learning method has been developed to assist the LM diagnosis with high accuracy and low time consumption effectively. Thanks to labeled data and step-by-step training, our proposed method can successfully classify cancer cells in the CSF to assist LM diagnosis early. In addition, this unique research can predict cancer’s primary source of LM, which relies on cytomorphologic features without immunohistochemistry. Our results show that deep learning can be widely used in medical images to classify cerebrospinal fluid cells. For complex cancer classification tasks, the accuracy of the proposed method is significantly higher than that of specialist doctors, and its performance is better than that of junior doctors and interns. The application of CNNs and CAD software may ultimately aid in expediting the diagnosis and overcoming the shortage of experienced cytologists, thereby facilitating earlier treatment and improving the prognosis of LM.
|
|
| 14. |
- Zhang, Ying, et al.
(författare)
-
Capture of novel sp3 hybridized Z-BN by compressing boron nitride nanotubes with small diameter
- 2022
-
Ingår i: Diamond and related materials. - : Elsevier. - 0925-9635 .- 1879-0062. ; 130
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental synthesis of new sp3 hybridized carbon/boron nitride structures remains challenging despite that numerous sp3 structures have been proposed in theory. Here, we showed that compressed multi-walled boron nitride nanotubes (MWBNNTs) and boron nitride peapods (C60@BNNTs) with small diameters could transform into a new sp3 hybridized boron nitride allotrope (Z-BN). This strategy is considered from the topological transition point of view in boron nitride nanotubes upon compression. Due to the increased curvature in compressed small-diameter MWBNNTs, the uncommon 4- and 8-membered rings in Z-BN could be more favorably formed. And the irreversible tube collapse is proved to be a critical factor for the capture of the formed Z-BN, because of the competition between the resilience of tube before collapse and the stress limitation for the lattice stabilization of Z-BN upon decompression. In this case, Z-BN starts to form above 19.0 GPa, which is fully reversible below 45 GPa and finally becomes quenchable at 93.5 GPa. This collapse-induced capture of the high-pressure phase could also be extended to other tubular materials for quenching novel sp3 structures.
|
|
| 15. |
- Zhang, Ying, et al.
(författare)
-
Negative Volume Compressibility in Sc3N@C-80-Cubane Cocrystal with Charge Transfer
- 2020
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 142:16, s. 7584-7590
-
Tidskriftsartikel (refereegranskat)abstract
- According to the laws of thermodynamics, materials normally exhibit contraction or expansion along the directions of the applied pressure or tension. Here, we show that a man-made cocrystal of a metallofullerene and highly energetic cubane, with strained sp(3) bonding, may exhibit an anomalous negative volume compressibility. In this cocrystal, the freely rotating fullerene Sc3N@C-80 acts as a structural building block while static cubane molecules fill the lattice interstitial sites. Under high pressure, Sc3N@C-80 keeps stable and preserves the crystalline framework of the materials, while the cubane undergoes a progressive configurational transformation above 6.5 GPa, probably promoted by charge transfer from fullerene to cubane. A further configurational change of the cubane into a low-density configuration at higher pressure results in an anomalous pressure-driven lattice expansion of the cocrystal (similar to 1.8% volume expansion). Such unusual negative compressibility has previously only been predicted by theory and suggested to appear in mechanical metamaterials.
|
|
| 16. |
- Chang, Kuang Yu, et al.
(författare)
-
Observational constraints reduce model spread but not uncertainty in global wetland methane emission estimates
- 2023
-
Ingår i: Global Change Biology. - 1354-1013. ; 29:15, s. 4298-4312
-
Tidskriftsartikel (refereegranskat)abstract
- The recent rise in atmospheric methane (CH4) concentrations accelerates climate change and offsets mitigation efforts. Although wetlands are the largest natural CH4 source, estimates of global wetland CH4 emissions vary widely among approaches taken by bottom-up (BU) process-based biogeochemical models and top-down (TD) atmospheric inversion methods. Here, we integrate in situ measurements, multi-model ensembles, and a machine learning upscaling product into the International Land Model Benchmarking system to examine the relationship between wetland CH4 emission estimates and model performance. We find that using better-performing models identified by observational constraints reduces the spread of wetland CH4 emission estimates by 62% and 39% for BU- and TD-based approaches, respectively. However, global BU and TD CH4 emission estimate discrepancies increased by about 15% (from 31 to 36 TgCH4 year−1) when the top 20% models were used, although we consider this result moderately uncertain given the unevenly distributed global observations. Our analyses demonstrate that model performance ranking is subject to benchmark selection due to large inter-site variability, highlighting the importance of expanding coverage of benchmark sites to diverse environmental conditions. We encourage future development of wetland CH4 models to move beyond static benchmarking and focus on evaluating site-specific and ecosystem-specific variabilities inferred from observations.
|
|
| 17. |
- Cheng, Benyuan, et al.
(författare)
-
Pressure-induced metallization and amorphization in VO2(A) nanorods
- 2016
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 93:18
-
Tidskriftsartikel (refereegranskat)abstract
- A metallic state enabled by the metal-insulator transition (MIT) in single crystal VO2(A) nanorods is demonstrated, which provides important physical foundation in experimental understanding of MIT in VO2. The observed tetragonal metallic state at ∼28 GPa should be interpreted as a distinct metastable state, while increasing pressure to ∼32 GPa, it transforms into a metallic amorphous state completely. The metallization is due to V 3d orbital electrons delocalization, and the amorphization is attributed to the unique variation of V-O-V bond angle. A metallic amorphous VO2 state is found under pressure, which is beneficial to explore the phase diagram of VO2. Furthermore, this work proves the occurrence of both the metallization and amorphization in octahedrally coordinated materials.
|
|
| 18. |
- Du, Wanyi, et al.
(författare)
-
Photodoping of graphene/silicon van der Waals heterostructure observed by terahertz emission spectroscopy
- 2020
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 117:8
-
Tidskriftsartikel (refereegranskat)abstract
- Photodoping as a nonvolatile and reversible method can be used to modify the carrier distribution at the heterojunction interface. Herein, we explore the 2D/3D van der Waals (vdW) graphene/silicon (G/Si) heterostructure in real time by terahertz (THz) emission spectroscopy. Photoinduced doping is introduced by a continuous wave laser, which leads to a screening effect to the built-in electric field at the interface. The resulting decrease in transient photocurrent reduces the THz emission amplitude from the G/Si heterostructure. The photoinduced doping effect suggests a 40% THz intrinsic modulation depth at external reverse bias. This work provides an effective way to actively control the THz emission process from the G/Si interface and paves the way for analyzing the interfacial process under photoinduced doping in vdW heterostructures.
|
|
| 19. |
- Guo, Yaxiao, et al.
(författare)
-
Molybdenum and boron synergistically boosting efficient electrochemical nitrogen fixation
- 2020
-
Ingår i: Nano Energy. - : Elsevier Ltd. - 2211-2855 .- 2211-3282. ; 78
-
Tidskriftsartikel (refereegranskat)abstract
- Ammonia production consumes ~2% of the annual worldwide energy supply, therefore strategic alternatives for the energy-intensive ammonia synthesis through the Haber-Bosch process are of great importance to reduce our carbon footprint. Inspired by MoFe-nitrogenase and the energy-efficient and industrially feasible electrocatalytic synthesis of ammonia, we herein establish a catalytic electrode for artificial nitrogen fixation, featuring a carbon fiber cloth fully grafted by boron-doped molybdenum disulfide (B-MoS2/CFC) nanosheets. An excellent ammonia production rate of 44.09 μg h–1 cm–2 is obtained at −0.2 V versus the reversible hydrogen electrode (RHE), whilst maintaining one of the best reported Faradaic efficiency (FE) of 21.72% in acidic aqueous electrolyte (0.1 M HCl). Further applying a more negative potential of −0.25 V renders the best ammonia production rate of 50.51 μg h–1 cm–2. A strong-weak electron polarization (SWEP) pair from the different electron accepting and back-donating capacities of boron and molybdenum (2p shell for boron and 5d shell for molybdenum) is proposed to facilitate greatly the adsorption of non-polar dinitrogen gas via N≡N bond polarization and the first protonation with large driving force. In addition, for the first time a visible light driven photo-electrochemical (PEC) cell for overall production of ammonia, hydrogen and oxygen from water + nitrogen, is demonstrated by coupling a bismuth vanadate BiVO4 photo-anode with the B-MoS2/CFC catalytic cathode.
|
|
| 20. |
- Kanyolo, Godwill Mbiti, et al.
(författare)
-
Honeycomb layered oxides: Structure, energy storage, transport, topology and relevant insights
- 2021
-
Ingår i: Chemical Society Reviews. - : Royal Society of Chemistry (RSC). - 1460-4744 .- 0306-0012. ; 50:6, s. 3990-4030
-
Forskningsöversikt (refereegranskat)abstract
- The advent of nanotechnology has hurtled the discovery and development of nanostructured materials with stellar chemical and physical functionalities in a bid to address issues in energy, environment, telecommunications and healthcare. In this quest, a class of two-dimensional layered materials consisting of alkali or coinage metal atoms sandwiched between slabs exclusively made of transition metal and chalcogen (or pnictogen) atoms arranged in a honeycomb fashion have emerged as materials exhibiting fascinatingly rich crystal chemistry, high-voltage electrochemistry, fast cation diffusion besides playing host to varied exotic electromagnetic and topological phenomena. Currently, with a niche application in energy storage as high-voltage materials, this class of honeycomb layered oxides serves as ideal pedagogical exemplars of the innumerable capabilities of nanomaterials drawing immense interest in multiple fields ranging from materials science, solid-state chemistry, electrochemistry and condensed matter physics. In this review, we delineate the relevant chemistry and physics of honeycomb layered oxides, and discuss their functionalities for tunable electrochemistry, superfast ionic conduction, electromagnetism and topology. Moreover, we elucidate the unexplored albeit vastly promising crystal chemistry space whilst outlining effective ways to identify regions within this compositional space, particularly where interesting electromagnetic and topological properties could be lurking within the aforementioned alkali and coinage-metal honeycomb layered oxide structures. We conclude by pointing towards possible future research directions, particularly the prospective realisation of Kitaev-Heisenberg-Dzyaloshinskii-Moriya interactions with single crystals and Floquet theory in closely-related honeycomb layered oxide materials. This journal is
|
|
| 21. |
- Khong, Sei Zhen, et al.
(författare)
-
Robust synchronisation of unstable linear time-invariant systems
- 2015
-
Konferensbidrag (refereegranskat)abstract
- A framework based on the gap metric and integral quadratic constraints (IQCs) is developed for analysing robust synchronisation of heterogenous linear time-invariant networks. Both the agents and the communication channels are allowed to be dynamic and unstable. Structural properties of the uncertainty are described by IQCs and exploited in synchronisation analysis as a means to reduce conservatism. The homotopy employed in IQC analysis is defined with respect to the graph topology as induced by the gap metric, whereby open-loop unstable dynamics are accommodated. The results in this paper extend recent developments, which have been shown to unify several existing synchronisation analysis methods in the literature.
|
|
| 22. |
- Khong, Sei Zhen, et al.
(författare)
-
Robust Synchronization in Multi-Agent Networks with Unstable Dynamics
- 2018
-
Ingår i: IEEE Transactions on Control of Network Systems. - : IEEE. - 2325-5870. ; 5:1, s. 205-214
-
Tidskriftsartikel (refereegranskat)abstract
- The problem of synchronization in heterogenous linear time-invariant networks is investigated. An approach blending the theory of integral quadratic constraints (IQCs) with the gap metric is proposed to study the problem within a unifying framework, where both the agents and communication channels can be dynamic, infinite-dimensional, unstable, and uncertain. Structural properties of the uncertainty are described by IQCs and exploited in the analysis to reduce conservatism. The homotopy employed in IQC analysis is defined with respect to the graph topology induced by the gap metric, whereby open-loop unstable dynamics are accommodated. Sufficient conditions for synchronism are provided, extending recent developments which have been shown to unify several existing synchronization analysis results in the literature.
|
|
| 23. |
- Li, Fang-Yi, et al.
(författare)
-
Inhibition of K-Ras4B-plasma membrane association with a membrane microdomain-targeting peptide
- 2020
-
Ingår i: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 11:3, s. 826-832
-
Tidskriftsartikel (refereegranskat)abstract
- The association of K-Ras4B protein with plasma membrane (PM) is required for its signaling activity. Thus, direct inhibition of K-Ras4B-PM interaction could be a potential anti-Ras therapeutic strategy. However, it remains challenging to modulate such protein-PM interaction. Based on Ras isoform-specific PM microdomain localization patterns, we have developed a potent and isoform-selective peptide inhibitor, Memrasin, for detachment of K-Ras4B from the PM. Memrasin is one of the first direct inhibitors of K-Ras4B-PM interaction, and consists of a membrane l(d) region-binding sequence derived from the C-terminal region of K-Ras4B and an endosome-escape enhancing motif that can aggregate on membrane. It forms peptide-enriched domains in the l(d) region, abrogates the tethering of K-Ras4B to the PM and accordingly impairs Ras signaling activity, thereby efficiently decreasing the viability of several human lung cancer cells in a dose-responsive and K-Ras dependent manner. Memrasin provides a useful tool for exploring the biological function of K-Ras4B on or off the PM and a potential starting point for further development into anti-Ras therapeutics.
|
|
| 24. |
- Li, Jian-Fang, et al.
(författare)
-
Soy isoflavone delays the progression of thioacetamide-induced liver fibrosis in rats
- 2011
-
Ingår i: Scandinavian Journal of Gastroenterology. - : Informa UK Limited. - 1502-7708 .- 0036-5521. ; 46:3, s. 341-349
-
Tidskriftsartikel (refereegranskat)abstract
- Objective. Our aim was to investigate the effect of soy isoflavone (SI) on liver fibrosis in a thioacetamide (TAA)-induced rat model. Materials and methods. Twenty-eight rats were assigned to four groups: sham group, fibrosis group, low-dose treatment group (LDg) and high-dose treatment group (HDg). SI (90 or 270 mg/kg) was administered daily during the model development by TAA. Standard liver tests, platelet derived growth factor-BB (PDGF-BB) and tissue inhibitor of metalloproteinase-1 (TIMP-1) were measured. The expression of collagen, alpha alpha-smooth muscle actin (alpha alpha-SMA) and transforming growth factor-beta beta 1 (TGF-beta beta 1) in liver tissue was determined. Electron microscopy was used to perform ultrastructural analysis of the livers. Results. Hepatic fibrosis was induced by 8 weeks of TAA administration. However, following the administration of SI, collagen staining significantly declined as compared with the fibrosis group (p < 0.01). Less collagen fibers around the hepatic stellate cells (HSCs) were observed in HDg as compared to the fibrosis group and LDg. There was no significant difference in standard liver tests between the fibrosis group and the two treatment groups. The levels of PDGF-BB and TIMP-1 in the two SI-treated groups were significantly lower than in the fibrosis group (p < 0.01). The expression of alpha alpha-SMA and TGF-beta beta 1 in HDg was less than that in the fibrosis group and LDg (p < 0.01). Conclusion. Administration of a high dose of SI resulted in an obvious inhibitory effect on liver fibrosis induced by TAA in rats. One hypothesis is that the effect may be related to the inhibition of HSC activation and proliferation.
|
|
| 25. |
- Lu, Ya-Ke, et al.
(författare)
-
Reciprocal relationship between psychosocial work stress and quality of life : the role of gender and education from the longitudinal study of the Survey of Health, Ageing and Retirement in Europe
- 2019
-
Ingår i: BMJ Open. - : BMJ. - 2044-6055. ; 9:6
-
Tidskriftsartikel (refereegranskat)abstract
- Objective To investigate the reciprocal relationship between psychosocial work stress and quality of life (QoL) and to examine whether the relationship can be moderated by gender or education. Design Longitudinal, population-based study. Setting The Survey of Health, Ageing and Retirement in Europe (SHARE). Participants The study population was derived from the SHARE, and there were 2006 participants with good QoL at baseline, 1109 with high job control and 1072 with high job reward, respectively, who were followed up for 2 years to detect incidence of poor QoL, low job control and low job reward. Main outcome measures Logistic regression models were employed to explore the reciprocal relationship between psychological work stress and QoL. Stratification analyses by gender and education were performed. Results Participants with low reward (OR= 1.53, 95% CI 1.26 to 1.88) and low control (OR= 1.40, 95% CI 1.14 to 1.71) at baseline were at higher risk of poor QoL over the 2-year follow-up. The combination of low reward and low control further increased the risk (OR= 1.90, 95% CI 1.46 to 2.48). Stratified analyses revealed that these associations were more pronounced among those who had high levels of education. Further, individuals with poor QoL were at significantly higher risk of having low reward (OR= 2.14, 95% CI 1.55 to 2.96) but not low control (OR= 1.33, 95% CI0.98 to 1.79) at the 2-year follow-up, especially among those who had medium levels of education. No gender differences were found. Conclusions There is a reciprocal relationship between psychological work stress and poor QoL. Education may play an important role in the relationship.
|
|
| 26. |
- Ma, Tao, et al.
(författare)
-
Genomic insights into salt adaptation in a desert poplar
- 2013
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 4, s. 2797-
-
Tidskriftsartikel (refereegranskat)abstract
- Despite the high economic and ecological importance of forests, our knowledge of the genomic evolution of trees under salt stress remains very limited. Here we report the genome sequence of the desert poplar, Populus euphratica, which exhibits high tolerance to salt stress. Its genome is very similar and collinear to that of the closely related mesophytic congener, P. trichocarpa. However, we find that several gene families likely to be involved in tolerance to salt stress contain significantly more gene copies within the P. euphratica lineage. Furthermore, genes showing evidence of positive selection are significantly enriched in functional categories related to salt stress. Some of these genes, and others within the same categories, are significantly upregulated under salt stress relative to their expression in another salt-sensitive poplar. Our results provide an important background for understanding tree adaptation to salt stress and facilitating the genetic improvement of cultivated poplars for saline soils.
|
|
| 27. |
- Masese, Titus, et al.
(författare)
-
Mixed alkali-ion transport and storage in atomic-disordered honeycomb layered NaKNi 2 TeO 6
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms (Na and K) to produce a mixed-alkali honeycomb layered oxide material, namely, NaKNi2TeO6. Via transmission electron microscopy measurements, we reveal the local atomic structural disorders characterised by aperiodic stacking and incoherency in the alternating arrangement of Na and K atoms. We also investigate the possibility of mixed electrochemical transport and storage of Na+ and K+ ions in NaKNi2TeO6. In particular, we report an average discharge cell voltage of about 4 V and a specific capacity of around 80 mAh g–1 at low specific currents (i.e., < 10 mA g–1) when a NaKNi2TeO6-based positive electrode is combined with a room-temperature NaK liquid alloy negative electrode using an ionic liquid-based electrolyte solution. These results represent a step towards the use of tailored cathode active materials for “dendrite-free” electrochemical energy storage systems exploiting room-temperature liquid alkali metal alloy materials.
|
|
| 28. |
- Muhammad, Imran, et al.
(författare)
-
3D porous sulfur-graphdiyne with splendid electrocatalytic and energy storage application
- 2023
-
Ingår i: Materials Today Chemistry. - : Elsevier. - 2468-5194. ; 34
-
Tidskriftsartikel (refereegranskat)abstract
- The blooming emergence of graphdiyne featuring embellished sp-hybridized carbons has been highly alluring for electrocatalysis and ion storage. Here, a porous 3D material sulfur-graphdiyne (3D-SGDY) is theoretically designed comprising butadiyne chains and sulfur as a heteroatom, owing a stable cubic skeleton and an atypical tuneable indirect bandgap. Compared to sp2-bonded carbon materials, the existence of sp-bonded carbon in 3D-SGDY tuned the direction of organic reactions leading to a single carbon product with numerous storage sites for the metal ions. Anchoring a single Cu atom in 3D-SGDY, we realize the unique Cu–C (3D-SGDY) chemical bonds exhibiting unconventional selectivity for CO2 reduction. The Cu–C bond in 3D-SGDY predominantly forms the *OCHO intermediates in lieu of *COOH and provides an active charge deportation channel during the reduction process of CO2 into CH4 product. Additionally, the porous structure reveals its astounding potential as an anode material by facilitating rapid transportation with a very low diffusion barrier of 0.06 eV and an ultrahigh capacity of 1826.4 mAhg−1 for Ca-ions. This work not only provides the 3D prototype of GDY but also administers the atomic level selectivity for CO2RR and high-performance Ca-ion batteries.
|
|
| 29. |
- Nie, Shisong, et al.
(författare)
-
High Conductivity, Semiconducting, and Metallic PEDOT:PSS Electrode for All-Plastic Solar Cells
- 2023
-
Ingår i: Molecules. - : MDPI. - 1431-5157 .- 1420-3049. ; 28:6
-
Tidskriftsartikel (refereegranskat)abstract
- Plastic electrodes are desirable for the rapid development of flexible organic electronics. In this article, a plastic electrode has been prepared by employing traditional conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and plastic substrate polyethersulfone (PES). The completed electrode (Denote as HC-PEDOT:PSS) treated by 80% concentrated sulfuric acid (H2SO4) possesses a high electrical conductivity of over 2673 S/cm and a high transmittance of over 90% at 550 nm. The high conductivity is attributed to the regular arrangement of PEDOT molecules, which has been proved by the X-ray diffraction characterization. Temperature-dependent conductivity measurement reveals that the HC-PEDOT:PSS possesses both semiconducting and metallic properties. The binding force and effects between the PEDOT and PEI are investigated in detail. All plastic solar cells with a classical device structure of PES/HC-PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS show a PCE of 4.05%. The ITO-free device with a structure of Glass/HC-PEDOT:PSS/Al4083/PM6:Y6/PDINO/Ag delivers an open-circuit voltage (V-OC) of 0.81 V, short-circuit current (J(SC) ) of 23.5 mA/cm(2), fill factor (FF) of 0.67 and a moderate power conversion efficiency (PCE) of 12.8%. The above results demonstrate the HC-PEDOT:PSS electrode is a promising candidate for all-plastic solar cells and ITO-free organic solar cells.
|
|
| 30. |
- Qiao, Ya-Mei, et al.
(författare)
-
Reciprocal associations between job strain and depression : A 2-year follow-up study from the Survey of Health, Ageing and Retirement in Europe
- 2019
-
Ingår i: Brain and Behavior. - : Wiley. - 2162-3279 .- 2162-3279. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Background: A growing number of people suffered from depression. This study examined the depression prevalence in workers across 10 European countries plus Israel and the reciprocal associations between job strain and depression.Methods: The study population consisted of 7,879 workers aged 50-63 years at baseline (2004) from the Survey of Health, Ageing, and Retirement in Europe (SHARE). Job demands (physical or psychosocial) and job control variables were derived from the Job Content Questionnaire (JCQ). Two 4-category job strains (physical and psychosocial) were obtained based on the cross-tabulation of these dichotomized demands and control variables. There were 4,284 depression-free, 3,259 high physical strain-free and 3,195 high psychosocial strain-free participants at baseline who were followed up for 2 years to detect incident depression, high physical job strain, or high psychosocial strain, respectively. The reciprocal associations between job strain and depression were analyzed by multivariate logistic regression and multivariate multilevel logistic regression adjusting for potential confounders.Results: The prevalence of depression varied from the lowest 12.5% in Germany to the highest 27.2% in France. Compared to individuals with low strain, a significantly higher risk of depression were found in individuals with high physical strain (OR = 1.39) and high psychosocial strain (OR = 1.55), after adjusting for potential confounders. Depression at baseline was not significantly associated with subsequent high job strain. Similar results were observed from multilevel models that took into consideration of the potential country-level influences.Conclusions: The prevalence of depression varies across countries in Europe. Avoiding high job strain may be an effective preventive strategy to prevent depression epidemic.
|
|
| 31. |
- Ren, Zhenjing, et al.
(författare)
-
Tetratricopeptide-containing SMALL KERNEL 11 is essential for the assembly of cytochrome c oxidase in maize mitochondria
- 2023
-
Ingår i: Plant Physiology. - : Oxford University Press (OUP). - 0032-0889 .- 1532-2548. ; 192:1, s. 170-187
-
Tidskriftsartikel (refereegranskat)abstract
- Assembly of the functional complexes of the mitochondrial respiratory chain requires sophisticated and efficient regulatory mechanisms. In plants, the subunit composition and assembly factors involved in the biogenesis of cytochrome c oxidase (complex IV) are substantially less defined than in mammals and yeast. In this study, we cloned maize (Zea mays) Small kernel 11 (Smk11) via map-based cloning. Smk11 encodes a mitochondria-localized tetratricopeptide repeat protein. Disruption of Smk11 severely affected the assembly and activity of mitochondrial complex IV, leading to delayed plant growth and seed development. Protein interactions studies revealed that SMK11 might interact with four putative complex IV assembly factors, Inner membrane peptidase 1A (ZmIMP1A), MYB domain protein 3R3 (ZmMYB3R-3), cytochrome c oxidase 23 (ZmCOX23), and mitochondrial ferredoxin 1 (ZmMFDX1), among which ZmMFDX1 might interact with subunits ZmCOX6a and ZmCOX-X1; ZmMYB3R-3 might also interact with ZmCOX6a. The mutation of SMK11 perturbed the normal assembly of these subunits, leading to the inactivation of complex IV. The results of this study revealed that SMK11 serves as an accessory assembly factor required for the normal assembly of subunits into complex IV, which will accelerate the elucidation of the assembly of complex IV in plant mitochondria.
|
|
| 32. |
|
|
| 33. |
- Wang, Yuqi, et al.
(författare)
-
Electrolyte-Mediated Misconception of Carbon-Based Electrode Performance and Beyond in Metal-Ion Batteries
- 2023
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 13:29
-
Tidskriftsartikel (refereegranskat)abstract
- A half-cell that is composed of electrode and metal (e.g., lithium) is the most classical model for examining electrode performance in battery community, by which the voltage versus capacity profile is the important indicator. However, it is found that these results are not all reliable, as a misconception of electrode performance can be caused once the electrolyte is chemically unstable. As a paradigm, it is demonstrated that the diethyl carbonate (DEC) solvent can chemically react with lithium metal to form insoluble and soluble by-products, which can accumulate on the lithium anode to influence the lithium potential and/or migrate to the counter electrode to proceed with the uncompleted electrochemical reactions. The resultant voltage-capacity profile cannot reflect the actual electrode performance, such as the lithium storing capability within the graphite. The reason for this phenomenon is elucidated based on solvation chemistry, particularly the mechanism of mitigating it by introducing ethylene carbonatesolvent to form new hydrogen bonds. The viewpoint is further verified by employing the full cell and also extended in sodium and potassium batteries. This study shows the necessity of discerning the reliability of electrode performance and also sheds light on the importance of designing a compatible electrolyte to examine electrode performance.
|
|
| 34. |
- Wu, Jia-Jia, et al.
(författare)
-
Late-life depression and the risk of dementia in 14 countries : a 10-year follow-up study from the Survey of Health, Ageing and Retirement in Europe
- 2020
-
Ingår i: Journal of Affective Disorders. - : Elsevier BV. - 0165-0327 .- 1573-2517. ; 274, s. 671-677
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Depression is the most common mental health problem and often co-occurs with dementia in old age. This study investigates the in fluence of late-life depression on risk of dementia.Methods: A total of 16210 dementia-free participants aged 60+ from the Survey of Health, Aging, and Retirement in Europe were followed up for 10 years to detect incident dementia. Depression was assessed by a 12-item Europe-depression scale, dementia was determined by physician diagnosis reported by the participants and their informants. Fine and Gray model was performed to explore the association between depression and incident dementia taking into account competing risk of death.Results: During an average of 8 years follow-up, 1030 (6.35%) incident dementia were identi fied. Late-life depression was related to higher subdistribution hazard ratio (sHR) of dementia (sHR=1.52, 95%CI: 1.32-1.75) after adjusting for age, gender, country, education, smoking, drinking, living arrangement, BMI, chronic disease, and physical activity. Further, the risk was only existed in those below age of 80 (sHR=1.75, 95%CI: 1.47-2.07). In addition, a dose-response association was observed between the severity of depression and dementia risk (p for trend<0.001).Limitation: The ascertainment of depression and dementia was based on information reported by the participants and/or their informants, which might result in information bias. The causal relationship could not be determined because limited follow-up time.Conclusions: Late-life depression is associated with higher incidence of dementia in a dose-response fashion. Interventions targeting depression patients aged 60-79 years and those with severe depression may be e ffective strategies to prevent dementia.
|
|
| 35. |
- Yao, Yongzhenh, et al.
(författare)
-
Numerical study on overall smoke control using naturally ventilated shafts during fires in a road tunnel
- 2019
-
Ingår i: International journal of thermal sciences. - : Elsevier BV. - 1290-0729 .- 1778-4166. ; 140, s. 491-504
-
Tidskriftsartikel (refereegranskat)abstract
- This paper studies the overall smoke control of natural ventilation systems with vertical shafts during fires in a common road tunnel by numerical modelling. The variables studied include the heat release rate, longitudinal fire location along the tunnel, length of shafts and the interval between two shafts. Simulation results indicate that the total smoke spread length on both sides of fire source is closely independent of the heat release rate and longitudinal fire locations. For a given dimensionless shaft interval (the ratio of the shaft interval to shaft length), with the increase of shaft length, the smoke spread length firstly increases, reaching a maximum at 12 m, and then decreases significantly until 18 m. For a fire less than 30 MW, the first shaft pair on both sides of fire source prevents the critical-temperature smoke (270 °C) from spreading beyond this shaft. For a 100 MW fire, in the cases with shorter shaft lengths (L shaft ≤9 m), the critical-temperature smoke can't be controlled between the first shaft pair. The gas temperature at human height (1.8 m) is less than 60 °C in all cases with shafts. Downdraught occurs when the smoke front stabilizes at the bottom of a shaft and the buoyancy force could be too low to overcome the kinetic pressure of the air flow flowing into this shaft, consequently destroying the structure of smoke layer. In most scenarios, the total exhaust area of shafts that is required to exhaust all the smoke is about 100 m 2 . The first shaft pair plays a critical role to exhaust the smoke, and its exhaust efficiency is also affected significantly by the shaft length. This study investigates how to control the smoke by using vertical shafts in a road tunnel fire and the conclusions are useful to tunnel fire protection engineering.
|
|
| 36. |
- Yao, Yongzheng, et al.
(författare)
-
Scale effect of mass loss rates for pool fires in an open environment and in tunnels with wind
- 2019
-
Ingår i: Fire safety journal. - : Elsevier BV. - 0379-7112 .- 1873-7226. ; 105, s. 41-50
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates the influence of wind on mass loss rate per unit area (MLRPUA) of fuel-controlled pool fires both in an open environment and inside tunnels and the scale effect of pool fires is also investigated. Large pool fires with a diameter D greater than 1 m (D > 1 m) are of key concern but small pool fires (D < 1 m) are also considered for comparison. This is done by analyzing large amounts of experimental data from the literature. Results show that for small pool fires (D < 1 m) in an open environment, increasing wind speed tends to increase the MLRPUA, especially for pools with D < 0.2 m, where the MLRPUA could increase significantly with the increase of wind speed. But when small pool fires occur in tunnels, the results are more complex. When the ratio of effective tunnel height to pool diameter is less than 3, increasing wind speed tends to decrease the MLRPUA. When this ratio is greater than 3, the influence of wind on MLRPUA of pool fires in tunnels is similar to that in an open environment. The influence of wind on the MLRPUA decreases for larger pool diameters, no matter whether the pool fire occurs in an open environment or in a tunnel. For large pools with D > 1 m, the MLRPUA is not affected significantly by increasing wind speed and most likely varies within 30% for a wide range of wind speeds based on the test data collected. This influence is far less than the values concluded by previous studies based on small pool fire experiments. The outcome of this study contributes to improving the understanding of burning characteristics of pool fires under windy conditions, especially large pool fires, which are much more meaningful than small pool fires from the perspectives of fire protection engineering and fire hazard assessment.
|
|
| 37. |
- Yao, Yongzheng, et al.
(författare)
-
Study of tunnel fires during construction using a model scale tunnel
- 2019
-
Ingår i: Tunnelling and Underground Space Technology. - : Elsevier Ltd. - 0886-7798 .- 1878-4364. ; 89, s. 50-67
-
Tidskriftsartikel (refereegranskat)abstract
- The paper presents a study on the characteristics of tunnel fires during construction. A model-scale tunnel was built and fire tests were conducted. The tunnel consists of an inclined access tunnel and a horizontal main tunnel. The main tunnel has two dead ends (excavation faces) and the only opening is from one side of the access tunnel. Propane gas burner and the fibre board soaked with the heptane were used as fuels. The flame characteristics, O 2 and CO volume fraction and gas temperature were measured and recorded. Two typical characteristics of self-extinguishment and smoke spread were found in the tunnel fires during construction. Results indicate that when a fire occurs in the horizontal main tunnel, the critical equivalence ratio for the occurrence of self-extinguishment is within 0.28–1.38 for the propane gas burner and 1.11–3.6 for the fibre board soaked with heptane. The difference is related to the burning behavior of the different fuels used. The fire location in the horizontal tunnel also has a significant influence on the fire development. A well-ventilated fire at the center of the horizontal tunnel becomes under-ventilated due to vitiation when it is located at the closed end of the horizontal tunnel. Besides, when a fire occurs at the closed end of the horizontal main tunnel, the stratification of smoke is destroyed after hitting the closed end, and then the smoke seems to spread over the entire cross section of the tunnel. The smoke spread velocity is found to be proportional to the ventilation rate. However, when a fire occurs at the closed end of the inclined access tunnel (lower end), the fire does not self-extinguish, even when the ventilation rate is 0 m 3 /s. The corresponding smoke spread velocity is higher than that in the horizontal main tunnel. The outcomes of this study provide new experimental information that contributes to improve the understanding of characteristics of tunnel fires during construction and can help firefighters to make better decisions during the rescue processes.
|
|
| 38. |
- Yao, Yongzheng, et al.
(författare)
-
The characteristics of under-ventilated pool fires in both model and medium-scale tunnels
- 2019
-
Ingår i: Tunnelling and Underground Space Technology. - : Elsevier BV. - 0886-7798 .- 1878-4364. ; 87, s. 27-40
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates the characteristics of under-ventilated fires in tunnels. This was done by using both model and medium-scale tunnels. The fuels used were heptane and xylene. The mass loss rates per unit area, ventilation rates from tunnel inlet, flame characteristics, O 2 , CO and CO 2 concentrations, optical densities and heat release rates were measured and recorded. Results show that the fire behaviors in under-ventilated tunnel fires are different from that in well-ventilated fires. In under-ventilated fires, the mass loss rate per unit area is found to decrease during identical periods due to the low oxygen concentration resulting from the low ventilation rate and vitiation, meanwhile the flame size dramatically reduces with a lifted and fluttering flame. This was clearly observed in model-scale tests, but due to limited optical view there was no possibility to observe this in the medium-scale tests. As a result, the ventilation rate approaches the amount required for complete combustion of vaporized fuel. This indicates that the combustion has converted from ventilation-controlled to fuel-controlled. No significant increase in CO production is observed in under-ventilated fires. Besides, the equivalence ratio and combustion efficiency were analyzed in order to judge whether the combustion is fuel-controlled or ventilation-controlled. This study provides new experimental information that contributes to improving the understanding of characteristics of under-ventilated fires in tunnel and can help firefighters to make right judgements and take related protective measures during the rescue processes.
|
|
| 39. |
- Yao, Yongzheng, et al.
(författare)
-
Theoretical and numerical study on influence of wind on mass loss rates of heptane pool fires at different scales
- 2021
-
Ingår i: Fire safety journal. - : Elsevier Ltd. - 0379-7112 .- 1873-7226. ; 120
-
Tidskriftsartikel (refereegranskat)abstract
- The paper presents an investigation of the influence of wind on the mass loss rate per unit area (MLRPUA) of heptane pool fires at different scales. This work was done by a theoretical analysis and numerical simulations. Correlations are developed to show how results from a small-scale pool fire might be used to estimate MLRPUA for a large-scale pool fire. The calculated results demonstrate that in the presence of wind, the MLRPUA in large-scale pool fires (side length>1 m) does not increase several times as the small-scale tests have revealed, and the 1.5 m heptane square pool fire only varies within a range of −20% and 30% of that in the free burn. Numerous heptane pool fires with different pool scales and wind speeds were simulated using FDS (Fire Dynamics Simulator). Results indicate that within a certain range of Froude number (0–2.5), the overall variation trend of MLRPUA with wind speed varies from increasing significantly to decreasing as the pool scale increases gradually (0.15 m–6 m). For large-scale heptane pool fires, the MLRPUA most likely fluctuates within ±40% for a wide range of Froude number. The outcomes of this study could contribute to improving the understanding of burning characteristics of different scales of pool fires under windy conditions in an open environment.
|
|
| 40. |
- Yao, Zhen, et al.
(författare)
-
A highly efficient transcriptome-based biosynthesis of non-ethanol chemicals in Crabtree negative Saccharomyces cerevisiae
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - : Springer Science and Business Media LLC. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Owing to the Crabtree effect, Saccharomyces cerevisiae produces a large amount of ethanol in the presence of oxygen and excess glucose, leading to a loss of carbon for the biosynthesis of non-ethanol chemicals. In the present study, the potential of a newly constructed Crabtree negative S. cerevisiae, as a chassis cell, was explored for the biosynthesis of various non-ethanol compounds. Results: To understand the metabolic characteristics of Crabtree negative S. cerevisiae sZJD-28, its transcriptional profile was compared with that of Crabtree positive S. cerevisiae CEN.PK113-11C. The reporter GO term analysis showed that, in sZJD-28, genes associated with translational processes were down-regulated, while those related to carbon metabolism were significantly up-regulated. To verify a potential increase in carbon metabolism for the Crabtree negative strain, the production of non-ethanol chemicals, derived from different metabolic nodes, was then undertaken for both sZJD-28 and CEN.PK113-11C. At the pyruvate node, production of 2,3-butanediol and lactate in sZJD-28-based strains was remarkably higher than that of CEN.PK113-11C-based ones, representing 16.8- and 1.65-fold increase in titer, as well as 4.5-fold and 0.65-fold increase in specific titer (mg/L/OD), respectively. Similarly, for shikimate derived p-coumaric acid, the titer of sZJD-28-based strain was 0.68-fold higher than for CEN.PK113-11C-based one, with a 0.98-fold increase in specific titer. While farnesene and lycopene, two acetoacetyl-CoA derivatives, showed 0.21- and 1.88-fold increases in titer, respectively. From malonyl-CoA, the titer of 3-hydroxypropionate and fatty acids in sZJD-28-based strains were 0.19- and 0.76-fold higher than that of CEN.PK113-11C-based ones, respectively. In fact, yields of products also improved by the same fold due to the absence of residual glucose. Fed-batch fermentation further showed that the titer of free fatty acids in sZJD-28-based strain 28-FFA-E reached 6295.6 mg/L with a highest reported specific titer of 247.7 mg/L/OD in S. cerevisiae. Conclusions: Compared with CEN.PK113-11C, the Crabtree negative sZJD-28 strain displayed a significantly different transcriptional profile and obvious advantages in the biosynthesis of non-ethanol chemicals due to redirected carbon and energy sources towards metabolite biosynthesis. The findings, therefore, suggest that a Crabtree negative S. cerevisiae strain could be a promising chassis cell for the biosynthesis of various chemicals.
|
|
| 41. |
- Yao, Zehan, et al.
(författare)
-
Magnetization-induced optical rectification and inverse spin Hall effect for interfacial terahertz generation in metallic heterostructures
- 2021
-
Ingår i: Physical Review B. - 2469-9950. ; 103:20
-
Tidskriftsartikel (refereegranskat)abstract
- Metallic heterostructure as promising terahertz (THz) spintronic emitters has promoted the development of both spintronics and THz science. However, the underlying physics at the metallic interface, such as the nonlinear optical effect, remains unclear. Herein, we present interface magnetization induced THz generation from metallic heterostructure consisting of Heusler alloy CoFeMnSi (CFMS) and Pd thin films. THz generation is ascribed to 35% contribution from the magnetization-induced optical rectification (MOR) and 65% contribution from inverse spin Hall effect (ISHE) based on the pump polarization and sample azimuthal angle dependent measurement. Furthermore, the contribution ratio of the MOR decreases to 12% via lowering the CFMS grown temperature, which is due to the reduced crystalline quality and possible metal to semiconductor transformation in CFMS. Our results not only clarify MOR and ISHE in metallic heterostructure for the scientific field, but they also benefit THz source optimization for the technology field.
|
|
| 42. |
- Yu, Dan, et al.
(författare)
-
Combustion characteristics of well-dispersed boron submicroparticles and plasma effect
- 2018
-
Ingår i: Combustion and Flame. - : Elsevier BV. - 0010-2180. ; 188, s. 94-103
-
Tidskriftsartikel (refereegranskat)abstract
- Boron is an attractive high-energy fuel additive. But it could not burn efficiently in practical systems due to its high ignition temperature and slow burning velocity. Finding methods to enhance the combustion of boron is desired. This work focused on the combustion characteristics of boron submicroparticles with and without plasma discharges in a hot environment supported by CH4/N2/O2 flat flame based on the optical diagnostics. The boron submicroparticles were dispersed by the nebulization method to control the agglomeration. The well-dispersed boron flame exhibited two different burning modes, depending on the ambient temperature. As the ambient temperature was above 1520 K, the boron flame showed definitely two-stage characteristics where the upstream of particle flow was yellow, corresponding to the first-stage flame, while the downstream was green and diffusive, corresponding to the second-stage flame. The first-stage and second-stage burn times were respectively in the range of 0.46–1.08 ms and 0.92–1.87 ms, as the ambient temperature decreased from 1752 K to 1520 K. The chemical kinetics-controlled mechanism was confirmed by the nearly linear size dependence of the burn time (d1 law). Nevertheless, as the ambient temperature was below 1520 K, the boron submicroparticles were partially burned or oxidized, exhibiting a mildly orange stream. This mild boron flame could be enhanced using a plasma discharge. The ignition delay time was shortened from 3.06 ms to 0.77 ms when the discharge was introduced at the ignition delay stage. The two-stage combustion characteristics occurred when the discharge was introduced at the combustion stage.
|
|
| 43. |
- Zhang, Xiao-Dong, et al.
(författare)
-
Establishment and assessments of a new model for the postoperative fatigue syndrome by major small intestinal resection in rats
- 2011
-
Ingår i: Scandinavian Journal of Gastroenterology. - : Informa UK Limited. - 1502-7708 .- 0036-5521. ; 46:11, s. 1302-1309
-
Tidskriftsartikel (refereegranskat)abstract
- Objective. Postoperative fatigue syndrome (POFS) is a general and main complication after surgery. However, there is no stable and standardized animal model for POFS. The aim of the present study was to establish a rodent model of POFS by small intestinal resection, with POFS evaluated by acknowledged physical and behavioral methods. Material and Methods. Forty-two Sprague-Dawley rats were randomly divided into four groups according to the length of a "middle" small intestinal resection: 0% (sham group; i.e., laparotomy alone), 10%, 40% and 70% groups, with corresponding lengths of small intestinal resections. Following surgery, the general state of health was evaluated. Tail suspension test, open field test and Morris water maze test were used to evaluate the degree of POFS. Serum albumin, transferrin, prealbumin and fibronectin were measured to assess the nutritional status, and superoxide dismutase (SOD) and malondialdehyde (MDA) were also measured. Results. As compared with the other three groups, the 70% small intestinal resection group showed the worst general state of health, decreased strength of the tail suspension test and decreased score of Morris water maze test (p < 0.05) after operation. All rats in whom the small intestinal resection was done demonstrated a certain degree of malnutrition and behavior of depression, and the 70% resection group had the lowest levels of transferrin, prealbumin and fibronectin as compared with the other groups (p < 0.05), as well as decreased SOD and increased MDA in serum (p < 0.05). Conclusions. Resection of 70% of the small intestine resulted in typical characteristics of POFS. As this procedure is simple, stable and easily reproducible, it may serve as a model for research on POFS.
|
|
| 44. |
- Zhao-Hai, He, et al.
(författare)
-
Characters of the magnetotail plasma injection surveyed from Cluster observation
- 2008
-
Ingår i: Chinese Journal of Geophysics. - 0001-5733. ; 51:2, s. 307-315
-
Tidskriftsartikel (refereegranskat)abstract
- The properties of proton (0 eV < E < 40 keV) in the plasma sheet are examined by means of a superposed epoch analysis, using 115 magnetotail plasma injection events which are identified from Cluster magnetotail orbit time in between 2001 and 2004. All events distribute in magnetic local time from 20 p.m. to 04 a. in. Five classes of magnetotail injection events are found to be similar with the geosynchronous observation: (1) pure ion injections; (2) ion injections followed a few minutes later by an electron injection; (3) simultaneous ion and electron injections; (4) electron injections followed a few minutes later by an ion injection; (5) pure electron injections. Proton shows a significant increase in temperature and density at the onset, and injects earthward with an increasing velocity more than the pre-injection average one. Super-posed epoch analysis on the simultaneous observation data of dusk-dawn electric field from the EFW (Electric Field and Waves) instrument, we found two different electric field configurations: ( I) electric field increases suddenly at the onset and the value is positive; (2) electric field changes the direction at the onset, and turns into a negative value. The simulation results of velocity vector after injection in equatorial plain, calculated in static magnetic (T89c) and electric (Volland-Stern) field models, agree with the statistical results mostly, and that suggests the electric drift caused by dawn-dusk convection electric field is one of the mechanisms of the particles injected earthward in magnetotail(-18 R-E < R < -10R(E)).
|
|
| 45. |
- Zhuo, Lai-Bao, et al.
(författare)
-
Impact of effort reward imbalance at work on suicidal ideation in ten European countries : The role of depressive symptoms
- 2020
-
Ingår i: Journal of Affective Disorders. - : Elsevier BV. - 0165-0327 .- 1573-2517. ; 260, s. 214-221
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Evidence of the association between effort reward imbalance (ERI) and suicidal ideation is sparse. This study examined the influence of ERI at work on suicidal ideation and the mediating effect of depressive symptoms. Methods: There were 4963 workers aged 50 + without suicidal ideation at baseline in the Survey of Health, Aging and Retirement in Europe, these workers were followed-up for 8-years to detect incident suicidal ideation. ERI was measured by a short ERI questionnaire. Suicidal ideation was evaluated by one item derived from the 12-item Europe-depression scale, and depressive symptoms were assessed by the remaining 11 items in the scale. Cox models were employed to explore the relationship adjusting for potential confounders. Mediation analysis was used to test the mediating effect of depressive symptoms. Results: A significantly higher incidence of suicidal ideation was related with high effort (HR = 1.51) and low reward (HR = 1.42), respectively. A high effort-low reward imbalance was associated with even higher risk of suicidal ideation (HR = 1.96) as compared to low effort-high reward combination. The association was varied by gender, region, education and household income. Depressive symptoms mediated a modest proportion (natural indirect effect 14.4%) of the total association between ERI and suicidal ideation. Limitation: Suicidal ideation definition based on self-administered questionnaires which could lead to false negatives. And some unmeasured confounders might have biased the results. Conclusions: Efforts in promoting balanced effort-reward at work may reduce suicidal ideation among working population aged 50+. Avoiding depressive symptoms may further enhance such efforts.
|
|
| 46. |
- Zhuo, Lai-Bao, et al.
(författare)
-
Working life job strain status and cognitive aging in Europe : A 12-year follow-up study
- 2021
-
Ingår i: Journal of Affective Disorders. - : Elsevier BV. - 0165-0327 .- 1573-2517. ; 295, s. 1177-1183
-
Tidskriftsartikel (refereegranskat)abstract
- Background: To examine the association of job strain with cognitive ability and the influence of life-course job strain on later life cognitive decline.Methods: Data were derived from six waves of the Survey of Health, Aging, and Retirement in Europe. The study sample consists of 13349 participants aged 50 to 98 years at wave 2 and has been followed up for 12-years. Job strain status across working life was assessed using a short demand-control job strain model containing two core dimensions: job demands and job control collected in wave 3. Cognitive abilities concerning episodic memory was assessed by immediate recall and delayed recall tests, executive function was evaluated by verbal fluency test collected in all waves (waves 2–7) except wave 3. Mixed-effects model was used to estimate working life job strain and its cumulative effect on cognitive decline.Results: Both passive and high strain jobs were associated with lower levels of cognitive ability (episodic memory and verbal fluency) in comparison with active job. Long exposure to active- or low strain-job was associated with higher cognitive ability whereas long exposure to passive job or moderate duration of high strain job was associated with lower cognitive ability. The rate of memory decline was positively related to moderate duration of passive job and negatively related to long-term exposure to low strain job.Limitations: Information on working conditions was based on self-reported recollections.Conclusions: Working life variation in job strain status and their duration may explain individual differences in cognitive ability in later life.
|
|
