1. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
2. |
|
|
3. |
- Shi, Yuchen, et al.
(författare)
-
A comparative study of high-quality C-face and Si-face 3C-SiC(1 1 1) grown on off-oriented 4H-SiC substrates
- 2019
-
Ingår i: Journal of Physics D. - : Biopress Ltd. - 0022-3727 .- 1361-6463. ; 52:34
-
Tidskriftsartikel (refereegranskat)abstract
- We present a comparative study of the C-face and Si-face of 3C-SiC(111) grown on off-oriented 4H-SiC substrates by the sublimation epitaxy. By the lateral enlargement method, we demonstrate that the high-quality bulk-like C-face 3C-SiC with thickness of ~1 mm can be grown over a large single domain without double positioning boundaries (DPBs), which are known to have a strongly negative impact on the electronic properties of the material. Moreover, the C-face sample exhibits a smoother surface with one unit cell height steps while the surface of the Si-face sample exhibits steps twice as high as on the C-face due to step-bunching. High-resolution XRD and low temperature photoluminescence measurements show that C-face 3C-SiC can reach the same high crystalline quality as the Si-face 3C-SiC. Furthermore, cross-section studies of the C- and Si-face 3C-SiC demonstrate that in both cases an initial homoepitaxial 4H-SiC layer followed by a polytype transition layer are formed prior to the formation and lateral expansion of 3C-SiC layer. However, the transition layer in the C-face sample is extending along the step-flow direction less than that on the Si-face sample, giving rise to a more fairly consistent crystalline quality 3C-SiC epilayer over the whole sample compared to the Si-face 3C-SiC where more defects appeared on the surface at the edge. This facilitates the lateral enlargement of 3C-SiC growth on hexagonal SiC substrates.
|
|
4. |
- Shi, Yuchen, et al.
(författare)
-
Elimination of step bunching in the growth of large-area monolayer and multilayer graphene on off-axis 3CSiC (111)
- 2018
-
Ingår i: Carbon. - : Elsevier. - 0008-6223 .- 1873-3891. ; 140, s. 533-542
-
Tidskriftsartikel (refereegranskat)abstract
- Multilayer graphene has exhibited distinct electronic properties such as the tunable bandgap for optoelectronic applications. Among all graphene growth techniques, thermal decomposition of SiC is regarded as a promising method for production of device-quality graphene. However, it is still very challenging to grow uniform graphene over a large-area, especially multilayer graphene. One of the main obstacles is the occurrence of step bunching on the SiC surface, which significantly influences the formation process and the uniformity of the multilayer graphene. In this work, we have systematically studied the growth of monolayer and multilayer graphene on off-axis 3CSiC(111). Taking advantage of the synergistic effect of periodic SiC step edges as graphene nucleation sites and the unique thermal decomposition energy of 3CSiC steps, we demonstrate that the step bunching can be fully eliminated during graphene growth and large-area monolayer, bilayer, and four-layer graphene can be controllably obtained on high-quality off-axis 3CSiC(111) surface. The low energy electron microscopy results demonstrate that a uniform four-layer graphene has been grown over areas of tens of square micrometers, which opens the possibility to tune the bandgap for optoelectronic devices. Furthermore, a model for graphene growth along with the step bunching elimination is proposed.
|
|
5. |
- Shi, Yuchen, 1991-
(författare)
-
Growth of 3C-SiC and Graphene for Solar Water-Splitting Application
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Silicon carbide (SiC) is regarded as an important semiconductor for a variety of applications including high-temperature, high-power and high-frequency devices. The most common polytypes of SiC are hexagonal (4H- or 6H-SiC) and cubic silicon carbide (3C-SiC), which differ from each other by the ordering of the Si–C bilayers along the c-axis crystal direction. Among different polytypes of SiC, 3C-SiC has attracted specific interest due to its prominent properties such as high electron mobility and low interface trap density in MOSFET devices. Moreover, with a relatively small bandgap of 2.36 eV and suitable conduction and valence band positions, 3C-SiC has also been considered as a promising material for solar water splitting application, which provides a completely renewable approach to convert solar energy into storable hydrogen fuel. However, the growth of high-quality 3C-SiC remains a great challenge for decades.Graphene, a single layer of sp2-bonded carbon atoms, has shown outstanding electronic properties and becomes the most promising candidate for next-generation electronic and optoelectronic devices. Epitaxial growth of graphene on SiC substrates by sublimation of Si from SiC provides a feasible route to fabricate wafer-scale device-quality graphene. The most advantage of this method is that a variety of devices can be processed directly on graphene/SiC without any transfer process, which is needed in the case of graphene produced by exfoliation or CVD on metals. During past years, the growth of monolayer (ML) graphene on hexagonal SiC (6H-SiC, 4H-SiC) substrates has been extensively studied. However, it is challenging to grow large-area and uniform multilayer graphene on hexagonal SiC substrates due to the stepbunching issue during the sublimation growth.Multilayer graphene has recently attracted great interest due to its tunable electronic properties for various electronic and optoelectronic applications. It has been shown that the electronic properties of multilayer graphene are strongly influenced by its stacking sequence. In particular, the rhombohedral stacking sequence (ABC stacking) has shown its potential to introduce a flat band energy dispersion at the K points of the Brillouin zone, which would result in many exotic phases of matter such as superconductivity. Among various SiC polytypes, 3CSiC is predicted to be the most suitable substrate for the epitaxial growth of rhombohedral multilayer graphene.This thesis work mainly covers the sublimation growth of high-quality Si-face and C-face 3C-SiC on off-oriented 4H-SiC, exploring the proper parameter window for the growth of homogeneous graphene layers ranging from monolayer to multilayer on Si-face off-oriented 3C-SiC and the growth of graphene on C-face 3C-SiC, as well as the characterizations on 3CSiC and graphene. Moreover, as a proof of concept, photoelectrochemical (PEC) water splitting cells based on the Si-face and C-face 3C-SiC have been fabricated to study the conversion of solar energy into chemical fuel, hydrogen.Firstly, the high-quality bulk-like Si-face and C-face 3C-SiC(111) were grown on 4- degree off-oriented 4H-SiC substrates by the sublimation epitaxy technique. The C-face sample exhibited a smoother surface with a step height of one-unit cell without the step bunching. In contrast, the Si-face 3C-SiC showed larger steps with a height of two-unit cells of 3C-SiC due to the pronounced step bunching. The cross-sectional studies showed that C-face 3C-SiC exhibited less polytype-transition layer than the Si-face sample. This would help the lateral enlargement of 3C-SiC domains. We also demonstrated that the crystalline quality of C-face 3C-SiC was comparable to the Si-face sample.Secondly, we systematically studied the growth of monolayer and multilayer graphene on off-axis 3C-SiC(111). Taking advantage of the synergistic effect of periodic SiC step edges as graphene nucleation sites and the unique thermal decomposition energy of 3C-SiC steps, we demonstrated that the step bunching was fully eliminated during graphene growth on Si-face 3C-SiC and large-area monolayer, bilayer, and four-layer graphene were controllably obtained on high-quality off-axis Si-face 3C-SiC(111). The growth of uniform four-layer graphene over areas of tens of square micrometers was demonstrated. The electronic structures of multilayer graphene with different stacking sequences were systematically studied by experimental and theoretical analysis. It was demonstrated that the four-layer graphene exhibited rhombohedral stacking sequence, which introduced a flat band near the Fermi level. Moreover, the flat-band width and bandgap can be tuned by the interlayer spacing of graphene. In contrast, graphene layers grown on the off-axis C-face 3C-SiC(1̄1̄1̄) showed 1ML to 4ML graphene domains with large-area coverage over several of square micrometers and there was no buffer layer underneath. The low energy electron diffraction pattern collected on the monolayer graphene domain demonstrated four sets of graphene (1 x 1) spots, indicating the existence of rotational disorders within the monolayer graphene. To compare with graphene growth on the off-oriented 3C-SiC, the growth of graphene on off-oriented 4H-SiC epilayers was also explored. The 4HSiC epilayers were first grown on 4-degree off-oriented 4H-SiC substrates and periodically inclined step facets in-between terraces were induced on 4H-SiC epilayers due to the pronounced step bunching. The graphene grown on such step-structured surface of off-oriented 4H-SiC showed that the terraces were mainly covered by monolayer graphene and the buffer layer underneath it while on the step facets, graphene was strongly buckled and appeared to be largely decoupled from the surface.Finally, the PEC water splitting performance based on the Si-face and C-face 3C-SiC was systematically studied. It was found that the SiC surface polarity played an important role in the PEC performance. The influence of both Si-face and C-face on surface proton transfer was investigated. It was demonstrated that the Si-face SiC was more energy-favorable, thus making oxygen evolution reaction operate at a very low overpotential. Furthermore, the PEC watersplitting performance was significantly enhanced by using NiO/3C-SiC p-n junction as a photoanode. A high photovoltage of 1.0 V, a photocurrent density of 1.01 mA/cm-2 at 0.55 V versus reversible hydrogen electrode (VRHE), a low onset potential of 0.20 VRHE and a high fill factor of 57% were demonstrated in the PEC water splitting cell under AM1.5G 100 mW cm-2 illumination.
|
|
6. |
- Shtepliuk, Ivan I., 1987-, et al.
(författare)
-
Lead (Pb) interfacing with epitaxial graphene
- 2018
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 20:25, s. 17105-17116
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we report the electrochemical deposition of lead (Pb) as a model metal on epitaxial graphene fabricated on silicon carbide (Gr/SiC). The kinetics of electrodeposition and morphological characteristics of the deposits were evaluated by complementary electrochemical, physical and computational methods. The use of Gr/SiC as an electrode allowed the tracking of lead-associated redox conversions. The analysis of current transients passed during the deposition revealed an instantaneous nucleation mechanism controlled by convergent mass transport on the nuclei locally randomly distributed on epitaxial graphene. This key observation of the deposit topology was confirmed by low values of the experimentally-estimated apparent diffusion coefficient, Raman spectroscopy and scanning electron microscopy (SEM) studies. First principles calculations showed that the nucleation of Pb clusters on the graphene surface leads to weakening of the interaction strength of the metal-graphene complex, and only spatially separated Pb adatoms adsorbed on bridge and/or edge-plane sites can affect the vibrational properties of graphene. We expect that the lead adatoms can merge in large metallic clusters only at defect sites that reinforce the metal-graphene interactions. Our findings provide valuable insights into both heavy metal ion electrochemical analysis and metal electroplating on graphene interfaces that are important for designing effective detectors of toxic heavy metals.
|
|
7. |
- Syväjärvi, Mikael, 1968-, et al.
(författare)
-
A surface study of wet etched AlGaN epilayers grown by hot-wall MOCVD
- 2007
-
Ingår i: Journal of Crystal Growth, Vol. 300. - : Elsevier BV. - 0022-0248. ; , s. 242-245
-
Konferensbidrag (refereegranskat)abstract
- Epitaxial layers of AlGaN were grown by hot-wall MOCVD and their surfaces wet chemically etched with phosphorous acid. The as-grown surfaces and the development of the etched surfaces after 10 and 20 min of etching were studied with atomic force microscopy (AFM) and CL. In the as-grown layers growth features may be resolved while the RMS is as low as 1.4 Å in a scan area of 2×2 μm. Surfaces etched for 10 min had developed etch pits and a low RMS roughness of 7 Å indicating a uniform quality of the layers. Micrometer scale hexagonal features were observed after 20 min of etching. In some cases a deep hexagonal etch pit is observed in the centre of the hexagonal feature with a 30° rotation to each other, suggesting that the origin is substrate-induced defects. © 2006 Elsevier B.V. All rights reserved.
|
|
8. |
- Syväjärvi, Mikael, et al.
(författare)
-
Fast epitaxy by PVT of SiC in hydrogen atmosphere
- 2005
-
Ingår i: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 275:1-2, s. e1103-e1107
-
Tidskriftsartikel (refereegranskat)abstract
- Epitaxial growth in hydrogen atmosphere has been studied in relation to sublimation epitaxial growth. A new type of features with a hexagonal shape are observed in the layers grown in hydrogen atmosphere. The morphological details of the features have been studied with optical microscopy and atomic force microscopy. An interactive relation of the defect appearance with the step flow growth mode seems to be present. The results are compared with growth in vacuum, argon, and helium conditions. The possible influence of thermal component to a reactive one in hydrogen etching is discussed.
|
|
9. |
- Syväjärvi, Mikael, 1968-, et al.
(författare)
-
Formation of ferromagnetic SiC : Mn phases
- 2005
-
Ingår i: Materials Science Forum, Vols. 483-485. ; , s. 241-244
-
Konferensbidrag (refereegranskat)abstract
- Ferromagnetic phases in as-grown SiC have been studied. An interpretation about the formation based on details of the phase appearance in the layers from optical microscopy, AFM, and TEM investigations is related to the growth. Some phases were found to have a nucleation at the edge of the phase and detailed TEM investigations show that the phases have an increased grain density at the edge while the main part of the phase is monocrystalline.
|
|
10. |
- Yakimova, Rositsa, 1942-, et al.
(författare)
-
Novel material concepts of transducers for chemical and biosensors
- 2007
-
Ingår i: Biosensors & bioelectronics. - : Elsevier BV. - 0956-5663 .- 1873-4235. ; 22:12, s. 2780-2785
-
Tidskriftsartikel (refereegranskat)abstract
- The objectives of this work are to contribute to the knowledge about physical and chemical properties of WBG semiconductors, such as ZnO and GaN towards development of advanced bio- and chemical sensors. For the semiconductors, growth techniques typically yielding single crystal material are applied. Thin epitaxial quality films of ZnO and GaN are fabricated on SiC or sapphire substrates. An emphasis is given to ZnO due to the interesting combination of the semiconductor and oxide properties. Surface bio-functionalization of ZnO is performed by APTES, MPA or MP-TMS molecules. We have compared some of the results to (hydroxylated) GaN surfaces functionalized by MP-TMS. The covalent attachment of the self-assembled biomolecular layers has been proven by XPS analysis. For complementary electrical characterization impedance spectroscopy measurements were performed. The results are intended to serve the realization of bioelectronic transducer devices based on SiC or GaN transistors with a ZnO gate layer. To take advantage of the catalytic properties of ZnO, initial prototypes of chemical sensors for gas sensing are processed on ZnO deposited either on SiC or on sapphire and they are further tested for the response to reducing or oxidizing gas ambient. The sensor devices show sensitivity to oxygen in the surface resistivity mode while a Pt Schottky contact ZnO/SiC device responds to reducing gases. These results are compared to published results on Pt/GaN Schottky diodes. © 2007 Elsevier B.V. All rights reserved.
|
|
11. |
- Yakimova, Rositsa, 1942-, et al.
(författare)
-
Surface functionalization and biomedical applications based on SiC
- 2007
-
Ingår i: Journal of Physics D. - 0022-3727 .- 1361-6463. ; 40:20, s. 6435-6442
-
Tidskriftsartikel (refereegranskat)abstract
- The search for materials and systems, capable of operating long term under physiological conditions, has been a strategy for many research groups during the past years. Silicon carbide (SiC) is a material, which can meet the demands due to its high biocompatibility, high inertness to biological tissues and to aggressive environment, and the possibility to make all types of electronic devices. This paper reviews progress in biomedical and biosensor related research on SiC. For example, less biofouling and platelet aggregation when exposed to blood is taken advantage of in a variety of medical implantable materials while the robust semiconducting properties can be explored in surface functionalized bioelectronic devices. © 2007 IOP Publishing Ltd.
|
|
12. |
- Yazdi, Gholamreza, 1966-, et al.
(författare)
-
Aligned AlN nanowires and microrods by self-patterning
- 2007
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 90:12, s. 123103-
-
Tidskriftsartikel (refereegranskat)abstract
- Self-patterned AlN microrods and nanowires were grown on 4H-SiC substrate by a physical vapor transport method. AlN hexagonal pyramids were found to be nucleation sites for the evolution of the observed morphological forms. The average diameter and length of the nanowires are about 200 nm and 90 µm, respectively. The density of microrods corresponds to the concentration of the pyramids, while the nanowires are less compact. Low-temperature cathodoluminescence spectra of microrods show band gap emission of AlN at 208 nm, which confirms that they are AlN single crystals. A formation mechanism of the AlN structures is suggested.
|
|
13. |
- Yazdi, Gholamreza, 1966-, et al.
(författare)
-
Employing discontinuous and continuous growth modes for preparation of AlN nanostructures on SiC substrates
- 2007
-
Ingår i: ECSCRM 2006, Newcastle, UK. - : Trans Tech Publications, Switzerland. ; , s. 1031-1034
-
Konferensbidrag (refereegranskat)abstract
- In this report we present results on growth and characterization of AlN wires and thinfilms on SiC substrates. We have employed PVT technique in close space geometry for AlNdeposition on SiC off oriented substrates, most of which were prepared to have scratch-free smoothas-grown surface by SiC sublimation epitaxy. By manipulating the surface kinetics we have beenable to determine growth conditions yielding discontinuous or continuous morphologiescorresponding to nanowires and thin films, respectively. A particular feature of the latterexperiments is the fast temperature ramp up at the growth initiation. The AlN surface morphologywas characterized by optical, AFM and XRD tools, which showed good crystal quality independentof the growth mode.
|
|
14. |
- Yazdi, Gholamreza, 1966-, et al.
(författare)
-
Fabrication of free-standing AlN crystals by controlled microrod growth
- 2008
-
Ingår i: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 300:5, s. 935-939
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to propose a growth procedure for preparation of crack-free thick aluminum nitride (AlN) layers that can be easily separated from the substrate. The overall process is based on the physical vapor transport method employing a seed and a source material. In this case, the substrate is an epitaxial 4H-SiC layer and the growth of AlN is initiated at etch pits formed during the ramp up time prior to establishing growth temperature. Development of hexagonal pyramids on which arrays of microrods are formed is the core of the growth procedure. Free-standing wafers having 10 mm diameter and about 120 μm thick have been fabricated.
|
|
15. |
- Yazdi, Gholamreza, 1966-, et al.
(författare)
-
Formation of needle-like and columnar structures of AlN
- 2007
-
Ingår i: Journal of Crystal Growth. - : Elsevier BV. - 0022-0248 .- 1873-5002. ; 300:1, s. 130-135
-
Tidskriftsartikel (refereegranskat)abstract
- The present study focused on understanding the formation of needle-like and columnar structures by investigating the initial nucleation of aluminium nitride (AlN) on SiC substrates with SEM, AFM, and XRD. The grown AlN consisted of high concentration (8×104 cm−2) hexagonal hillocks (HHs) that originate from threading dislocations in the substrate. The KOH etching technique has been used to examine the origin and formation process of HHs and defect reduction in the grown AlN crystals. A model is introduced to explain the AlN HH formation. The SEM result shows that the AlN columnar structure was formed by merging of needles, which are grown exactly on completed AlN HHs, followed by a lateral growth.
|
|
16. |
- Yazdi, Gholamreza, 1966-
(författare)
-
Growth and Characterization of AlN : From Nano Structures to Bulk Material
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Aluminum nitride (AlN) exhibits a large direct band gap, 6.2 eV, and is thus suitable forsolid state white-light-emitting devices. It is capable in spintronics because of its high Curietemperature if doped with transition metals. AlN can also be used as a buffer layer for growth ofdevice-grade GaN as well as for application in sensors, surface acoustic wave devices, and hightemperatureelectronics. AlN shows excellent field-emission performance in vacuummicroelectronic devices due to its small electron affinity value, which is from negative to 0.6 eV.In this sense, nanostructured AlN, such as AlN nanowires and nanorods, is important forextending our knowledge on the potential of nanodevice applications. For growth of bulk AlN thesublimation- recondensation (a kind of physical vapor transport growth) method is the mostsuccessful and promising crystal growth technique.In thesis the physical vapor transport (PVT) principle has been implemented for synthesisof AlN on 4H-SiC in sublimation epitaxy close space configuration. It has been shown that theAlN crystal morphology is responsive to the growth conditions given by temperature (1650-1900oC) and nitrogen pressure (200-800 mbar) and each morphology kind (platelet-like, needles, columnar structure, continuous layers, and free-standing quasi bulk material) occurs within anarrow window of growth parameters. Controlled operation conditions for PVT growth of wellaligned perfectly oriented arrays of AlN highly symmetric hexagonal microrods have beenelaborated and the mechanism of microrod formation has been elucidated. Special patterned SiCsubstrates have been created which act as templates for the AlN selective area growth. Themicrorods revealed an excellent feature of boundary free coalescence with growth time,eventually forming ~120 μm thick AlN layer which can be easily detached from the SiC substratedue to a remarkable performance of structural evolution. It was discovered that the locally grownAlN microrods emerge from sharp tipped hexagonal pyramids, which consist of the rare 2H-SiCpolytype and a thin AlN layer on the surface. Two unique consequences appear from the finding,the first is that the 2H-SiC polytype facilitates the nucleation of wurtzite AlN, and the second isthat the bond between the low angle apex of the pyramids and the AlN layer is very week, thusallowing an easy separation to yield free standing wafers. AlN nanowires with an aspect ratioas high as 600 have been grown with a high growth rate. Again, they have perfect alignmentalong the c-axis of the wurtzite structure with small tilt given by the orientation of the SiCsubstrate. The nanowires possess a single crystal structure with high perfection, since neitherdislocations nor stacking faults were revealed.The proposed growth concept can be further explored to enlarge the free standing AlNwafers up to a size provided by commercially available SiC four inch wafers. Also, AlN wafersfabricated by the present method may be used as seeds for large boule growth. AlN nanowires, asobtained in this study, can be used for creating a piezoelectric generator and field emitters withhigh efficiency.
|
|
17. |
- Yazdi, Gholamreza, 1966-, et al.
(författare)
-
Growth and morphology of AlN crystals
- 2006
-
Ingår i: Physica Scripta. - 0031-8949 .- 1402-4896. ; T126, s. 127-130
-
Tidskriftsartikel (refereegranskat)abstract
- This study focused on growth dependencies, morphological forms and initial nucleation of aluminium nitride (AlN) crystals. Epitaxial layers of AlN have been grown on 4H-SiC substrates by sublimation recondensation in a radio frequency (RF) heated graphite furnace. Both AlN nuclei size and growth rate increased as temperature was increased and decreased as the pressure was increased. The results of these effects are different kinds of surface morphology. We have observed three modes of AlN single crystals: plate-like, columnar and needle-like. Optical microscopy and scanning electron microscopy (SEM) along with atomic force microscopy (AFM) were used to characterize the crystal surface morphology. Cathodoluminescence (CL) and x-ray diffraction (XRD) were applied to determine crystal quality and crystallographic orientation of the grown crystals.
|
|
18. |
|
|
19. |
- Yazdi, Gholamreza R., 1966-, et al.
(författare)
-
Defect-free Single Crystal AlN Nanowires by Physical Vapor Transport Growth
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Growth by vapor-solid mechanism of AlN nanowires with a diameter in the range of 40-500nm and a length reaching 100 μm, resulting in a max aspect ratio of 600, is reported. Theobjects are obtained at 1750 oC and 850 mbar nitrogen pressure on 4H-SiC patternedsubstrates by sublimation epitaxy, which is a version of the physical vapor transport techniqueand provides a high growth rate. The nanowires are hexagonally shaped and perfectly alignedalong the 0001 direction with a small tilt given by the substrate vicinality. It is observed thatunder nitrogen excess a preferential growth along the c-axis of the wurtzite structure takesplace, and switches to lateral growth below some critical value of nitrogen pressure.Investigations by SEM, TEM, CL and Raman spectroscopy measurements were carried out. Itis shown that the nanowires consist of wurtzitic AlN with defect free crystal structure.Possible applications have been depicted.
|
|