| 1. |
- Etman, Ahmed, et al.
(författare)
-
On the Capacities of Freestanding Vanadium Pentoxide-Carbon Nanotube-Nanocellulose Paper Electrodes for Charge Storage Applications
- 2020
-
Ingår i: ENERGY TECHNOLOGY. - : WILEY-V C H VERLAG GMBH. - 2194-4288 .- 2194-4296. ; 8:12
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, a one-step protocol for synthesizing freestanding 20 mu m thick cellulose paper electrodes composed of V2O5 . H2O nanosheets (VOx), carbon nanotubes (CNTs), and Cladophora cellulose (CC) is reported. In 1.0 m Na2SO4, the VOx-CNT-CC electrodes deliver capacities of about 200 and 50 C g(-1) at scan rates of 20 and 500 mV s(-1), respectively. The obtained capacities are compared with the theoretical capacities and are discussed based on the electrochemical reactions and the mass loadings of the electrodes. It is shown that the capacities are diffusion rate limited and, consequently, depend on the distribution and thickness of the V2O5 . H2O nanosheets, whereas the long-term cycling stabilities depend on vanadium species dissolving in the electrolyte. The electrodes feature high mass loadings (2 mg cm(-2)), good rate performances (25% capacity retention at 500 mV s(-1)), and capacity retentions of 85% after 8000 cycles. A symmetric VOx-CNT-CC energy storage device with a potential window of about 1 V exhibits a capacity of 40 C g(-1) at a scan rate of 2 mV s(-1).
|
|
| 2. |
- Etman, Ahmed S., et al.
(författare)
-
Facile Water-Based Strategy for Synthesizing MoO3-x Nanosheets : Efficient Visible Light Photocatalysts for Dye Degradation
- 2018
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 3:2, s. 2193-2201
-
Tidskriftsartikel (refereegranskat)abstract
- Nanostructured molybdenum oxides are promising materials for energy storage, catalysis, and electronic-based applications. Herein, we report the synthesis of MoO3-x nanosheets (x stands for oxygen vacancy) via an environmentally friendly liquid exfoliation approach. The process involves the reflux of the bulk alpha-MoO3 precursor in water at 80 degrees C for 7 days. Electron microscopy and atomic force microscopy show that the MoO3-x nanosheets are a few nanometer thick. MoO3-x nanosheets exhibit near infrared plasmonic property that can be enhanced by visible light irradiation for a short time (10 min). Photocatalytic activity of MoO3-x nanosheets for organic dye decolorization is examined using two different dyes (rhodamine B and methylene blue). Under visible light irradiation, MoO3-x nanosheets make a rapid decolorization for the dye molecules in less than 10 min. The simple synthesis procedure of MoO3-x nanosheets combined with their remarkable photochemical properties reflect the high potential for using the nanosheets in a variety of applications.
|
|
| 3. |
- Li, Jian, et al.
(författare)
-
Discovery of Complex Metal Oxide Materials by Rapid Phase Identification and Structure Determination
- 2019
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 141:12, s. 4990-4996
-
Tidskriftsartikel (refereegranskat)abstract
- The discovery of new inorganic functional materials is of fundamental importance in synthetic and materials science. In the past, the discovering new materials relied on a slow and serendipitous trial-and-error process, especially in the well-studied oxide systems. Here, we presented a strategy to shorten the period of discovery of new complex metal oxide materials by rapid phase identification and structure determination with 3D electron diffraction (ED) techniques, which do not require pure samples or single crystal growth. With such strategy, three new complex metal oxide materials (BiTi0.855Fe1.145O4.93, BiTi4FeO11 and BiTi2FeO7) were discovered in the simple ternary Bi2O3-Fe2O3-TiO2 system. To our best knowledge, it is the first time to discover three new complex metal oxide materials with new structure types in a single study of ternary metal oxide system. The structures of new materials were refined by combining powder X-ray diffraction (PXRD) with powder neutron diffraction (PND). The most striking feature in this system is that BiTi0.855Fe1.145O4.93 presents edge-shared five-coordinated iron/titanium polyhedra. In addition, another new phase BiTi4GaO11, which is isostructural with BiTi4FeO11, can be obtained when replacing Fe in BiTi4FeO11 with Ga. The band structure investigation of BiTi0.855Fe1.145O4.93, BiTi4FeO11, BiTi2FeO7 and BiTi4GaO11 shown that they were semiconductors with band gaps of 1.65, 2.0, 1.9, and 2.8 eV, respectively. Although this study focused on rapid developing of new inorganic functional materials, this method for developing new materials is available to all fields in chemistry and material chemistry where the limiting factors are impurity, submicrometersized crystals, etc.
|
|
