| 1. |
|
|
| 2. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 3. |
- Xu, Yan, et al.
(författare)
-
Impact of Amine Additives on Perovskite Precursor Aging : A Case Study of Light-Emitting Diodes
- 2021
-
Ingår i: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 12:25, s. 5836-5843
-
Tidskriftsartikel (refereegranskat)abstract
- Amines are widely employed as additives for improving the performance of metal halide perovskite optoelectronic devices. However, amines are well-known for their high chemical reactivity, the impact of which has yet to receive enough attention from the perovskite light-emitting diode community. Here, by investigating an unusual positive aging effect of CH3NH3I/CsI/PbI2 precursor solutions as an example, we reveal that amines gradually undergo N-formylation in perovskite precursors over time. This reaction is initialized by hydrolysis of dimethylformamide in the acidic chemical environment. Further investigations suggest that the reaction products collectively impact perovskite crystallization and eventually lead to significantly enhanced external quantum efficiency values, increasing from similar to 2% for fresh solutions to greater than or similar to 12% for aged ones. While this case study provides a positive aging effect, a negative aging effect is possible in other perovksite systems. Our findings pave the way for more reliable and reproducible device fabrication and call for further attention to underlying chemical reactions within the perovskite inks once amine additives are included.
|
|
| 4. |
- Brownstein, Catherine A., et al.
(författare)
-
An international effort towards developing standards for best practices in analysis, interpretation and reporting of clinical genome sequencing results in the CLARITY Challenge
- 2014
-
Ingår i: Genome Biology. - : Springer Science and Business Media LLC. - 1465-6906 .- 1474-760X. ; 15:3, s. R53-
-
Tidskriftsartikel (refereegranskat)abstract
- Background: There is tremendous potential for genome sequencing to improve clinical diagnosis and care once it becomes routinely accessible, but this will require formalizing research methods into clinical best practices in the areas of sequence data generation, analysis, interpretation and reporting. The CLARITY Challenge was designed to spur convergence in methods for diagnosing genetic disease starting from clinical case history and genome sequencing data. DNA samples were obtained from three families with heritable genetic disorders and genomic sequence data were donated by sequencing platform vendors. The challenge was to analyze and interpret these data with the goals of identifying disease-causing variants and reporting the findings in a clinically useful format. Participating contestant groups were solicited broadly, and an independent panel of judges evaluated their performance. Results: A total of 30 international groups were engaged. The entries reveal a general convergence of practices on most elements of the analysis and interpretation process. However, even given this commonality of approach, only two groups identified the consensus candidate variants in all disease cases, demonstrating a need for consistent fine-tuning of the generally accepted methods. There was greater diversity of the final clinical report content and in the patient consenting process, demonstrating that these areas require additional exploration and standardization. Conclusions: The CLARITY Challenge provides a comprehensive assessment of current practices for using genome sequencing to diagnose and report genetic diseases. There is remarkable convergence in bioinformatic techniques, but medical interpretation and reporting are areas that require further development by many groups.
|
|
| 5. |
- Luo, Xiyu, et al.
(författare)
-
Effects of local compositional heterogeneity in mixed halide perovskites on blue electroluminescence
- 2024
-
Ingår i: Matter. - 2590-2393. ; 7:3, s. 1054-1070
-
Tidskriftsartikel (refereegranskat)abstract
- Compositional heterogeneity is commonly observed in mixed bromide/iodide perovskite photoabsorbers, typically with minimal effects on charge carrier recombination and photovoltaic performance. Consistently, it has so far received very limited attention in bromide/chloride-mixed perovskites, which hold particular significance for blue light-emitting diodes. Here, we uncover that even a minor degree of localized halide heterogeneity leads to severe non-radiative losses in mixed bromide/chloride blue perovskite emitters, presenting a stark contrast to general observations in photovoltaics. We not only provide a visualization of the heterogeneity landscape spanning from micro-to sub-microscale but also identify that this issue mainly arises from the initially formed chloride-rich clusters during perovskite nucleation. Our work sheds light on a long-term neglected factor impeding the advancement of blue light-emitting diodes using mixed halide perovskites and provides a practical strategy to mitigate this issue.
|
|
| 6. |
- Yao, Tandong, et al.
(författare)
-
Recent Third Pole’s rapid warming accompanies cryospheric melt and water cycle intensification and interactions between monsoon and environment: multi-disciplinary approach with observation, modeling and analysis
- 2019
-
Ingår i: Bulletin of The American Meteorological Society. - 0003-0007 .- 1520-0477. ; :March, s. 423-444
-
Tidskriftsartikel (refereegranskat)abstract
- The Third Pole (TP) is experiencing rapid warming and is currently in its warmest period in the past 2,000 years. This paper reviews the latest development in multidisciplinary TP research associated with this warming. The rapid warming facilitates intense and broad glacier melt over most of the TP, although some glaciers in the northwest are advancing. By heating the atmosphere and reducing snow/ice albedo, aerosols also contribute to the glaciers melting. Glacier melt is accompanied by lake expansion and intensification of the water cycle over the TP. Precipitation has increased over the eastern and northwestern TP. Meanwhile, the TP is greening and most regions are experiencing advancing phenological trends, although over the southwest there is a spring phenological delay mainly in response to the recent decline in spring precipitation. Atmospheric and terrestrial thermal and dynamical processes over the TP affect the Asian monsoon at different scales. Recent evidence indicates substantial roles that mesoscale convective systems play in the TP’s precipitation as well as an association between soil moisture anomalies in the TP and the Indian monsoon. Moreover, an increase in geohazard events has been associated with recent environmental changes, some of which have had catastrophic consequences caused by glacial lake outbursts and landslides. Active debris flows are growing in both frequency of occurrences and spatial scale. Meanwhile, new types of disasters, such as the twin ice avalanches in Ali in 2016, are now appearing in the region. Adaptation and mitigation measures should be taken to help societies’ preparation for future environmental challenges. Some key issues for future TP studies are also discussed.
|
|
| 7. |
- Guo, Pengfei, et al.
(författare)
-
Chloride Induced Secondary Passive Film Failure for Laser Additive Manufacturing Nickel-Based Superalloys during Electrochemical Machining
- 2023
-
Ingår i: Journal of the Electrochemical Society. - : The Electrochemical Society. - 0013-4651 .- 1945-7111. ; 170:6
-
Tidskriftsartikel (refereegranskat)abstract
- We investigated the influence of chloride on the secondary passive film (SPF) on laser directed energy deposition Alloy 718 during electrochemical machining. The results show that SPF formed in chloride-containing electrolyte is more defective than that formed in chloride-free solution, due to the stepped-up cation ejection by chloride. Chloride accelerates the SPF failure via enhanced cation vacancy condensation, SPF dissolution and possibly via surface vacancy pairs' coalescence, restraining the formation of CrO3 and inducing a better surface quality than does the chloride-free electrolyte. Based on the Point Defect Model, a mechanism describing the influence of chloride on SPF was developed.
|
|
| 8. |
- Karlsson, Max, et al.
(författare)
-
Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Bright and efficient blue emission is key to further development of metal halide perovskite light-emitting diodes. Although modifying bromide/chloride composition is straightforward to achieve blue emission, practical implementation of this strategy has been challenging due to poor colour stability and severe photoluminescence quenching. Both detrimental effects become increasingly prominent in perovskites with the high chloride content needed to produce blue emission. Here, we solve these critical challenges in mixed halide perovskites and demonstrate spectrally stable blue perovskite light-emitting diodes over a wide range of emission wavelengths from 490 to 451 nanometres. The emission colour is directly tuned by modifying the halide composition. Particularly, our blue and deep-blue light-emitting diodes based on three-dimensional perovskites show high EQE values of 11.0% and 5.5% with emission peaks at 477 and 467 nm, respectively. These achievements are enabled by a vapour-assisted crystallization technique, which largely mitigates local compositional heterogeneity and ion migration.
|
|
| 9. |
- Qin, Jiajun, et al.
(författare)
-
From optical pumping to electrical pumping: the threshold overestimation in metal halide perovskites
- 2023
-
Ingår i: Materials Horizons. - : ROYAL SOC CHEMISTRY. - 2051-6347 .- 2051-6355. ; 10:4, s. 1446-1453
-
Tidskriftsartikel (refereegranskat)abstract
- The threshold carrier density, conventionally evaluated from optical pumping, is a key reference parameter towards electrically pumped lasers with the widely acknowledged assumption that optically excited charge carriers relax to the band edge through an ultrafast process. However, the characteristically slow carrier cooling in perovskites challenges this assumption. Here, we investigate the optical pumping of state-of-the-art bromide- and iodine-based perovskites. We find that the threshold decreases by one order of magnitude with decreasing excitation energy from 3.10 eV to 2.48 eV for methylammonium lead bromide perovskite (MAPbBr(3)), indicating that the low-energy photon excitation facilitates faster cooling and hence enables efficient carrier accumulation for population inversion. Our results are then interpreted due to the coupling of phonon scattering in connection with the band structure of perovskites. This effect is further verified in the two-photon pumping process, where the carriers relax to the band edge with a smaller difference in phonon momentum that speeds up the carrier cooling process. Furthermore, by extrapolating the optical pumping threshold to the band edge excitation as an analog of the electrical carrier injection to the perovskite, we obtain a critical threshold carrier density of similar to 1.9 x 10(17) cm(-3), which is one order of magnitude lower than that estimated from the conventional approach. Our work thus highlights the feasibility of metal halide perovskites for electrically pumped lasers.
|
|
| 10. |
- Tang, Weidong, et al.
(författare)
-
The roles of metal oxidation states in perovskite semiconductors
- 2023
-
Ingår i: Matter. - : CELL PRESS. - 2590-2393 .- 2590-2385. ; 6:11, s. 3782-3802
-
Forskningsöversikt (refereegranskat)abstract
- Metal halide perovskites are an emerging materials platform for optoelectronic, spintronic, and thermoelectric applications. The field of perovskite materials and devices has progressed rapidly over the past decade. For halide perovskite materials, a range of physical and chemical properties such as crystal structure, bandgap, charge carrier density, and stability that govern the device functionalities are critically determined by the oxidation states of the B-site metal ions. However, such an important mechanistic connection unique to halide perovskites is not well established, limiting the pace of development in this area. In this review, we identify the roles of metal oxidation states in perovskite semiconductors. The redox reactions leading to these states, and their effects on the materials properties, are clarified. Finally, we suggest routes to improving device efficiency and stability from the perspective of oxidation state control.
|
|
| 11. |
- Xiang, Yusen, et al.
(författare)
-
Ginkgolic acids inhibit SARS-CoV-2 and its variants by blocking the spike protein/ACE2 interplay
- 2023
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier. - 0141-8130 .- 1879-0003. ; 226, s. 780-792
-
Tidskriftsartikel (refereegranskat)abstract
- Targeting the interaction between the spike protein receptor binding domain (S-RBD) of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and angiotensin-converting enzyme 2 (ACE2) is a potential therapeutic strategy for treating coronavirus disease 2019 (COVID-19). However, we still lack small-molecule drug candidates for this target due to the missing knowledge in the hot spots for the protein-protein interaction. Here, we used NanoBiT technology to identify three Ginkgolic acids from an in-house traditional Chinese medicine (TCM) library, and they interfere with the S-RBD/ACE2 interplay. Our pseudovirus assay showed that one of the compounds, Ginkgolic acid C17:1 (GA171), significantly inhibits the entry of original SARS-CoV-2 and its variants into the ACE2-overexpressed HEK293T cells. We investigated and proposed the binding sites of GA171 on S-RBD by combining molecular docking and molecular dynamics simulations. Site-directed mutagenesis and surface plasmon resonance revealed that GA171 specifically binds to the pocket near R403 and Y505, critical residues of S-RBD for S-RBD interacting with ACE2. Thus, we provide structural insights into developing new small-molecule inhibitors and vaccines against the proposed S-RBD binding site.
|
|
| 12. |
- Xu, Weidong, 1988-, et al.
(författare)
-
Rational molecular passivation for high-performance perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Photonics. - : Springer Nature Publishing AG. - 1749-4885 .- 1749-4893. ; 13:6, s. 418-424
-
Tidskriftsartikel (refereegranskat)abstract
- A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations.
|
|
| 13. |
- Zhang, Jixian, et al.
(författare)
-
An online auction mechanism for time-varying multidimensional resource allocation in clouds
- 2020
-
Ingår i: Future generations computer systems. - : Elsevier. - 0167-739X .- 1872-7115. ; 111, s. 27-38
-
Tidskriftsartikel (refereegranskat)abstract
- Multidimensional resource allocation is a hot topic in cloud computing, but current cloud platforms support only fixed resource allocation, that is, the user resource requirements are consistent throughout the usage period, which may cause a waste of resources and reduce the revenue of resource providers. Therefore, time-varying multidimensional resource allocation and the corresponding pricing mechanism represent a new challenge in cloud computing. We address the problem of online time-varying multidimensional resource allocation and pricing in clouds. Specifically, (1) we propose a novel integer programming model for the time-varying multidimensional resource allocation problem and (2) we design a truthful online auction mechanism for resource allocation in a competitive environment. For the resource allocation algorithm, we propose a waiting period strategy and dominant-resource-based strategy to improve the social welfare and resource utilization. Simultaneously, a payment pricing algorithm based on critical value theory is proposed. Finally, we prove that the mechanism is truthful and individual rationality. Compared with existing research, our approach is characterized by high social welfare, high resource utilization and short execution time.
|
|
| 14. |
- Zhang, Jia, et al.
(författare)
-
Transport Layer Engineering Toward Lower Threshold for Perovskite Lasers
- 2023
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 35:30
-
Tidskriftsartikel (refereegranskat)abstract
- Charge-transport layers are essential for achieving electrically pumped perovskite lasers. However, their role in perovskite lasing is not fully understood. Here, the role of charge-transport layers on the lasing actions of perovskite films is explored by investigating the amplified spontaneous emission (ASE) thresholds. A largely reduced ASE threshold and enhanced ASE intensity is demonstrated by introducing an additional hole transport layer poly(triaryl amine) (PTAA). It is shown that the key role of the PTAA layer is to accelerate the hot-carrier cooling process by extracting holes in perovskites. With reduced hot holes, the Auger recombination loss is largely suppressed, resulting in decreased ASE threshold. This argument is further supported by the fact that the ASE threshold can be further reduced from 25.7 to 7.2 mu J cm(-2) upon switching the pumping wavelength from 400 to 500 nm to directly avoid excess hot-hole generation. This work exemplifies how to further reduce the ASE threshold with transport layer engineering through hot-hole manipulation. This is critical to maintaining the excellent gain properties of perovskites when integrating them into electrical devices, paving the way for electrically pumped perovskite lasers.
|
|
| 15. |
- Zhang, Liang, et al.
(författare)
-
Deep Learning for Additive Screening in Perovskite Light-Emitting Diodes
- 2022
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 61:37
-
Tidskriftsartikel (refereegranskat)abstract
- Additive engineering with organic molecules is of critical importance for achieving high-performance perovskite optoelectronic devices. However, experimentally finding suitable additives is costly and time consuming, while conventional machine learning (ML) is difficult to predict accurately due to the limited experimental data available in this relatively new field. Here, we demonstrate a deep learning method that can predict the effectiveness of additives in perovskite light-emitting diodes (PeLEDs) with a high accuracy up to 96 % by using a small dataset of 132 molecules. This model can maximize the information of the molecules and significantly mitigate the duplicated problem that usually happened with previous models in ML for molecular screening. Very high efficiency PeLEDs with a peak external quantum efficiency up to 22.7 % can be achieved by using the predicated additive. Our work opens a new avenue for further boosting the performance of perovskite optoelectronic devices.
|
|
| 16. |
- Adewumi, Oluseun, et al.
(författare)
-
Characterization of human embryonic stem cell lines by the International Stem Cell Initiative
- 2007
-
Ingår i: Nature Biotechnology. - : Springer Science and Business Media LLC. - 1087-0156 .- 1546-1696. ; 25:7, s. 803-816
-
Tidskriftsartikel (refereegranskat)abstract
- The International Stem Cell Initiative characterized 59 human embryonic stem cell lines from 17 laboratories worldwide. Despite diverse genotypes and different techniques used for derivation and maintenance, all lines exhibited similar expression patterns for several markers of human embryonic stem cells. They expressed the glycolipid antigens SSEA3 and SSEA4, the keratan sulfate antigens TRA-1-60, TRA-1-81, GCTM2 and GCT343, and the protein antigens CD9, Thy1 (also known as CD90), tissue- nonspecific alkaline phosphatase and class 1 HLA, as well as the strongly developmentally regulated genes NANOG, POU5F1 (formerly known as OCT4), TDGF1, DNMT3B, GABRB3 and GDF3. Nevertheless, the lines were not identical: differences in expression of several lineage markers were evident, and several imprinted genes showed generally similar allele-specific expression patterns, but some gene-dependent variation was observed. Also, some female lines expressed readily detectable levels of XIST whereas others did not. No significant contamination of the lines with mycoplasma, bacteria or cytopathic viruses was detected.
|
|
| 17. |
- Anchordoqui, Luis A., et al.
(författare)
-
The Forward Physics Facility : Sites, experiments, and physics potential
- 2022
-
Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 968, s. 1-50
-
Tidskriftsartikel (refereegranskat)abstract
- The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF's physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics.
|
|
| 18. |
- Attané, Isabelle, et al.
(författare)
-
Being a single man in rural China
- 2018
-
Ingår i: Population and Societies. - 0184-7783. ; :557, s. 1-4
-
Tidskriftsartikel (refereegranskat)abstract
- Those who are single in rural China are almost exclusively men. The presence of excess men in the population combines with internal migration and women's quest for upward social mobility through marriage to explain this phenomenon. The DefiChine survey sheds light on the situation of single men in three rural districts of Shaanxi. One of its findings is that, although the shortage of women does create competition between men looking for a wife, the social and economic dimensions of male singlehood cannot be ignored.
|
|
| 19. |
- Bao, Chunxiong, et al.
(författare)
-
Bidirectional optical signal transmission between two identical devices using perovskite diodes
- 2020
-
Ingår i: NATURE ELECTRONICS. - : NATURE PUBLISHING GROUP. - 2520-1131. ; 3:3, s. 156-164
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processed perovskite diode that functions as both optical transmitter and receiver can be used to build a monolithic pulse sensor and a bidirectional optical communication system. The integration of optical signal generation and reception into one device-thus allowing a bidirectional optical signal transmission between two identical devices-is of value in the development of miniaturized and integrated optoelectronic devices. However, conventional solution-processable semiconductors have intrinsic material and design limitations that prevent them from being used to create such devices with a high performance. Here we report an efficient solution-processed perovskite diode that is capable of working in both emission and detection modes. The device can be switched between modes by changing the bias direction, and it exhibits light emission with an external quantum efficiency of over 21% and a light detection limit on a subpicowatt scale. The operation speed for both functions can reach tens of megahertz. Benefiting from the small Stokes shift of perovskites, our diodes exhibit a high specific detectivity (more than 2 x 10(12) Jones) at its peak emission (~804 nm), which allows an optical signal exchange between two identical diodes. To illustrate the potential of the dual-functional diode, we show that it can be used to create a monolithic pulse sensor and a bidirectional optical communication system.
|
|
| 20. |
- Bao, Chunxiong, et al.
(författare)
-
High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:38
-
Tidskriftsartikel (refereegranskat)abstract
- Photodetectors are critical parts of an optical communication system for achieving efficient photoelectronic conversion of signals, and the response speed directly determines the bandwidth of the whole system. Metal halide perovskites, an emerging class of low-cost solution-processed semiconductors, exhibiting strong optical absorption, low trap states, and high carrier mobility, are widely investigated in photodetection applications. Herein, through optimizing the device engineering and film quality, high-performance photodetectors based on all-inorganic cesium lead halide perovskite (CsPbIxBr3-x), which simultaneously possess high sensitivity and fast response, are demonstrated. The optimized devices processed from CsPbIBr2 perovskite show a practically measured detectable limit of about 21.5 pW cm(-2) and a fast response time of 20 ns, which are both among the highest reported device performance of perovskite-based photodetectors. Moreover, the photodetectors exhibit outstanding long-term environmental stability, with negligible degradation of the photoresponse property after 2000 h under ambient conditions. In addition, the resulting perovskite photodetector is successfully integrated into an optical communication system and its applications as an optical signal receiver on transmitting text and audio signals is demonstrated. The results suggest that all-inorganic metal halide perovskite-based photodetectors have great application potential for optical communication.
|
|
| 21. |
- Cai, Weidong, et al.
(författare)
-
Multicolor light emission and multifunctional applications in double perovskite-Cs 2 NaInCl 6 by Cu + /Sb 3+co-doping
- 2024
-
Ingår i: Chemical Engineering Journal. - : ELSEVIER SCIENCE SA. - 1385-8947 .- 1873-3212. ; 489
-
Tidskriftsartikel (refereegranskat)abstract
- Halide double perovskites managed by metal doping approach can exhibit dual emission colors, which have been considered as promising multicolor luminescent materials. However, an independent and stable emission at yellow region is missing owing to limited doping candidates, hindering the further commercialization of multicolor luminescence applications in double perovskites. In this work, we successfully obtain stable multicolor emission with PLQE (photoluminescence quantum yield) as high as 78% through developing the CuI doping strategy in Sb-Cs2NaInCl6. By introducing a high CuI feed ratio in airtight autoclave to compete the oxidization effect, the oxidization of CuI into CuII (detrimental factor for high PLQE due to serious quenching effect) is largely suppressed. With changing the CuI feed ratio, at least four distinct emission colors ranging from blue, purple, pink to yellow can be realized via changing the excitation wavelength. Depending on tunable multicolor emission, we further demonstrate the promise of our co-doped double perovskites in anti-counterfeiting technology and multicolor lighting devices. Our results open the way for enriching the optical applications of double perovskites based on multicolor emission.
|
|
| 22. |
- Cai, Weidong, et al.
(författare)
-
Multicolor light emission in manganese-based metal halide composites
- 2022
-
Ingår i: Applied Physics Reviews. - : AIP Publishing. - 1931-9401. ; 9:4
-
Tidskriftsartikel (refereegranskat)abstract
- Manganese-based organic-inorganic metal halide composites have been considered as promising candidates for lead-free emitters. However, in spite of their excellent luminescence properties in green and red regions, blue emission-a critical component for white light generation-from pristine manganese-based composites is currently missing. In this work, we successfully achieve blue luminescence center in manganese-based composites through selecting specific organic component methylbenzylamine (MBA). Our approach is fundamentally different from green and red emission in manganese-based composites, which result from manganese-halide frameworks. The coexistence of different luminescence centers in our manganese-based composites is confirmed by photoluminescence (PL) and photoluminescence excitation (PLE) results. As a result of different photoluminescence excitation responses of different emission centers, the resulting emission color can be tuned with selecting different excitation wavelengths. Specifically, a white light emission can be obtained with Commission Internationale de leclairage coordinates of (0.33, 0.35) upon the 330 nm excitation. We further demonstrate the promise of our manganese-based composites in the anti-counterfeiting technology and multicolor lighting. Our results provide a novel strategy for full-spectral emission in manganese-based organic-inorganic metal halide composites and lay a solid foundation for a range of new applications. (C) 2022 Author(s).
|
|
| 23. |
- Chen, Fengxiang, et al.
(författare)
-
Adaptive chaos synchronization based on LMI technique
- 2007
-
Ingår i: Physica Scripta. - : IOP Publishing. - 0031-8949 .- 1402-4896. ; 75:3, s. 285-288
-
Tidskriftsartikel (refereegranskat)abstract
- The paper investigates the robust synchronization for two identical uncertain chaotic systems with different parameters perturbation and external disturbances. Based on Lyapunov stability theory, linear matrix inequality (LMI) techniques and adaptive techniques, a novel controller is proposed. With the resulting controller, global asymptotical synchronization between two identical uncertain chaotic systems is achieved. Finally, a Lorenz system is given as an example to verify the effectiveness of the proposed controller.
|
|
| 24. |
- Chen, Fengxiang, et al.
(författare)
-
Robust control of chaos in the Lorenz system with the variable structure control approach
- 2008
-
Ingår i: Physica scripta. T. - : IOP Publishing. - 0281-1847 .- 0031-8949 .- 1402-4896. ; 77:2
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- This paper is concerned with the robust control for a class of the uncertain Lorenz system subject to sector nonlinear input. Based on rigorous mathematical analysis, the proposed variable structure controller can drive the system state exactly to a class of a specific point or in the predictable neighborhood of an arbitrary desired point in the state space even with mismatch uncertainties. Moreover, the controller ensures that one of the error components can approach zero as time approaches infinity. Finally, numerical simulation results show the effectiveness of our work.
|
|
| 25. |
- Chen, Fengxiang, et al.
(författare)
-
Stabilization of parameters perturbation chaotic system via adaptive backstepping technique
- 2008
-
Ingår i: Applied Mathematics and Computation. - : Elsevier BV. - 0096-3003 .- 1873-5649. ; 200:1, s. 101-109
-
Tidskriftsartikel (refereegranskat)abstract
- The work of Yassen [M.T. Yassen, Chaos control of chaotic dynamical systems using backstepping design, Chaos Soliton Fract. 27 (2006) 537-548] which mainly investigated the stabilization problem for a class of chaotic systems without the parameters perturbation. This paper is concerned with stabilization problem for a class of parameters perturbation chaotic systems via both backstepping design method and adaptive technique. The proposed controllers can guarantee that the parameters perturbation systems will be stabilized at a fixed bounded point. Furthermore, the paper also proposes controllers to stabilize the uncertain chaotic system at equilibrium point with only backstepping design method. Finally, numerical simulations are given to illustrate the effectiveness of the proposed controllers
|
|
| 26. |
- Folkersen, Lasse, et al.
(författare)
-
Genomic and drug target evaluation of 90 cardiovascular proteins in 30,931 individuals.
- 2020
-
Ingår i: Nature metabolism. - : Springer Science and Business Media LLC. - 2522-5812. ; 2:10, s. 1135-1148
-
Tidskriftsartikel (refereegranskat)abstract
- Circulating proteins are vital in human health and disease and are frequently used as biomarkers for clinical decision-making or as targets for pharmacological intervention. Here, we map and replicate protein quantitative trait loci (pQTL) for 90 cardiovascular proteins in over 30,000 individuals, resulting in 451 pQTLs for 85 proteins. For each protein, we further perform pathway mapping to obtain trans-pQTL gene and regulatory designations. We substantiate these regulatory findings with orthogonal evidence for trans-pQTLs using mouse knockdown experiments (ABCA1 and TRIB1) and clinical trial results (chemokine receptors CCR2 and CCR5), with consistent regulation. Finally, we evaluate known drug targets, and suggest new target candidates or repositioning opportunities using Mendelian randomization. This identifies 11 proteins with causal evidence of involvement in human disease that have not previously been targeted, including EGF, IL-16, PAPPA, SPON1, F3, ADM, CASP-8, CHI3L1, CXCL16, GDF15 and MMP-12. Taken together, these findings demonstrate the utility of large-scale mapping of the genetics of the proteome and provide a resource for future precision studies of circulating proteins in human health.
|
|
| 27. |
- Kuang, Chaoyang, et al.
(författare)
-
Critical role of additive-induced molecular interaction on the operational stability of perovskite light-emitting diodes
- 2021
-
Ingår i: Joule. - : Cell Press. - 2542-4351. ; 5:3, s. 618-630
-
Tidskriftsartikel (refereegranskat)abstract
- Despite rapid improvements in efficiency and brightness of perovskite light-emitting diodes (PeLEDs), the poor operational stability remains a critical challenge hindering their practical applications. Here, we demonstrate greatly improved operational stability of high-efficiency PeLEDs, enabled by incorporating dicarboxylic acids into the precursor for perovskite depositions. We reveal that the dicarboxylic acids efficiently eliminate reactive organic ingredients in perovskite emissive layers through an in situ amidation process, which is catalyzed by the alkaline zinc oxide substrate. The formed stable amides prohibit detrimental reactions between the perovskites and the charge injection layer underneath, stabilizing the perovskites and the interfacial contacts and ensuring the excellent operational stability of the resulting PeLEDs. Through rationally optimizing the amidation reaction in the perovskite emissive layers, we achieve efficient PeLEDs with a peak external quantum efficiency of 18.6% and a long half-life time of 682 h at 20 mA cm(-2), presenting an important breakthrough in PeLEDs.
|
|
| 28. |
- Li, Yuangui, et al.
(författare)
-
A new method to construct reduced vector sets for simplifying support vector machines
- 2006
-
Ingår i: IEEE International Conference on Engineering of Intelligent Systems. - Piscataway, NJ : IEEE Communications Society. - 1424404568
-
Konferensbidrag (refereegranskat)abstract
- Support vector machines (SVM) are well known to give good results on pattern recognition problems, but for large scale problems, they exhibit substantially slower classification speeds than neural networks. It has been proposed to speed the SVM classification by approximating the decision function of SVM with a reduced vector set. A new method to construct the reduced vector set is proposed in this paper, which is constructed by merging the closest support vectors in an iterative fashion. A minor modification on the proposed method also has been made in order to simplify the decision function of reduced support vector machines (RSVM). The proposed method was compared with previous study on several benchmark data sets, and the computational results indicated that our method could simplify SVMs and RSVMs effectively, which will speed the classification for large scale problems
|
|
| 29. |
- Li, Yuangui, et al.
(författare)
-
Improved sparse least-squares support vector machine classifiers
- 2006
-
Ingår i: Neurocomputing. - : Elsevier BV. - 0925-2312 .- 1872-8286. ; 69:13-15, s. 1655-1658
-
Tidskriftsartikel (refereegranskat)abstract
- The least-squares support vector machines (LS-SVM) can be obtained by solving a simpler optimization problem than that in standard support vector machines (SVM). Its shortcoming is the loss of sparseness and this usually results in slow testing speed. Several pruning methods have been proposed. It is found that these methods can be further improved for classification problems. In this paper a different reduced training set is selected to re-train LS-SVM. Then a new procedure is proposed to obtain the sparseness. The performance of the proposed method is compared with other typical ones and the results indicate that it is more effective.
|
|
| 30. |
- Pan, Jiaxin, et al.
(författare)
-
Operando dynamics of trapped carriers in perovskite solar cells observed via infrared optical activation spectroscopy
- 2023
-
Ingår i: Nature Communications. - : NATURE PORTFOLIO. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Conventional spectroscopies are not sufficiently selective to comprehensively understand the behaviour of trapped carriers in perovskite solar cells, particularly under their working conditions. Here we use infrared optical activation spectroscopy (i.e., pump-push-photocurrent), to observe the properties and real-time dynamics of trapped carriers within operando perovskite solar cells. We compare behaviour differences of trapped holes in pristine and surface-passivated FA(0.99)Cs(0.01)PbI(3) devices using a combination of quasi-steady-state and nanosecond time-resolved pump-push-photocurrent, as well as kinetic and drift-diffusion models. We find a two-step trap-filling process: the rapid filling (similar to 10 ns) of low-density traps in the bulk of perovskite, followed by the slower filling (similar to 100 ns) of high-density traps at the perovskite/hole transport material interface. Surface passivation by n-octylammonium iodide dramatically reduces the number of trap states (similar to 50 times), improving the device performance substantially. Moreover, the activation energy (similar to 280 meV) of the dominant hole traps remains similar with and without surface passivation.
|
|
| 31. |
- Wang, Hao, et al.
(författare)
-
In-situ growth of low-dimensional perovskite-based insular nanocrystals for highly efficient light emitting diodes
- 2023
-
Ingår i: Light. - : SPRINGERNATURE. - 2095-5545 .- 2047-7538. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Regulation of perovskite growth plays a critical role in the development of high-performance optoelectronic devices. However, judicious control of the grain growth for perovskite light emitting diodes is elusive due to its multiple requirements in terms of morphology, composition, and defect. Herein, we demonstrate a supramolecular dynamic coordination strategy to regulate perovskite crystallization. The combined use of crown ether and sodium trifluoroacetate can coordinate with A site and B site cations in ABX(3) perovskite, respectively. The formation of supramolecular structure retard perovskite nucleation, while the transformation of supramolecular intermediate structure enables the release of components for slow perovskite growth. This judicious control enables a segmented growth, inducing the growth of insular nanocrystal consist of low-dimensional structure. Light emitting diode based on this perovskite film eventually brings a peak external quantum efficiency up to 23.9%, ranking among the highest efficiency achieved. The homogeneous nano-island structure also enables high-efficiency large area (1 cm(2)) device up to 21.6%, and a record high value of 13.6% for highly semi-transparent ones.
|
|
| 32. |
- Wang, Jixiang, et al.
(författare)
-
Molecularly Imprinted Fluorescent Test Strip for Direct, Rapid, and Visual Dopamine Detection in Tiny Amount of Biofluid
- 2019
-
Ingår i: Small. - : John Wiley & Sons. - 1613-6810 .- 1613-6829. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Paper-based assays for detection of physiologically important species are needed in medical theranostics owning to their superiorities in point of care testing, daily monitoring, and even visual readout by using chromogenic materials. In this work, a facile test strip is developed for visual detection of a neurotransmitter dopamine (DA) based on dual-emission fluorescent molecularly imprinted polymer nanoparticles (DE-MIPs). The DE-MIPs, featured with tailor-made DA affinity and good anti-interference, exhibit DA concentration-dependent fluorescent colors, due to the variable ratios of dual-emission fluorescence caused by DA binding and quenching. By facile coating DE-MIPs on a filter paper, the DA test strips are obtained. The resultant test strip, like the simplicity of a pH test paper, shows the potential for directly visual detection of DA levels just by dripping a tiny amount of biofluid sample on it. The test result of real serum samples demonstrates that the DA strip enables to visually and semiquantitatively detect DA within 3 min by using only 10 microL of serum samples and with a low detection limit ((100-150) x 10(-9) m) by naked eye. This work thus offers a facile and efficient strategy for rapid, visual, and on-site detection of biofluids in clinic.
|
|
| 33. |
- Wang, Xiaofeng, et al.
(författare)
-
Evidence for type ia supernova diversity from ultraviolet observations with the hubble space telescope
- 2012
-
Ingår i: Astrophysical Journal. - 0004-637X .- 1538-4357. ; 749:2, s. 126-
-
Tidskriftsartikel (refereegranskat)abstract
- We present ultraviolet (UV) spectroscopy and photometry of four Type Ia supernovae (SNe 2004dt, 2004ef, 2005M, and 2005cf) obtained with the UV prism of the Advanced Camera for Surveys on the Hubble Space Telescope. This data set provides unique spectral time series down to 2000 angstrom. Significant diversity is seen in the near-maximum-light spectra (similar to 2000-3500 angstrom) for this small sample. The corresponding photometric data, together with archival data from Swift Ultraviolet/Optical Telescope observations, provide further evidence of increased dispersion in the UV emission with respect to the optical. The peak luminositiesmeasured in the uvw1/F250W filter are found to correlate with the B-band light-curve shape parameter Delta m(15)(B), but with much larger scatter relative to the correlation in the broadband B band (e.g., similar to 0.4 mag versus similar to 0.2 mag for those with 0.8 mag < Delta m(15)(B) < 1.7 mag). SN 2004dt is found as an outlier of this correlation (at > 3 sigma), being brighter than normal SNe Ia such as SN 2005cf by similar to 0.9 mag and similar to 2.0 mag in the uvw1/F250W and uvm2/F220W filters, respectively. We show that different progenitor metallicity or line-expansion velocities alone cannot explain such a large discrepancy. Viewing-angle effects, such as due to an asymmetric explosion, may have a significant influence on the flux emitted in the UV region. Detailed modeling is needed to disentangle and quantify the above effects.
|
|
| 34. |
- Xu, Weidong, et al.
(författare)
-
Iodomethane-Mediated Organometal Halide Perovskite with Record Photoluminescence Lifetime
- 2016
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 8:35, s. 23181-23189
-
Tidskriftsartikel (refereegranskat)abstract
- Organometallic lead halide perovskites are excellent light harvesters for high-efficiency photovoltaic devices. However, as the key component in these devices, a perovskite thin film with good morphology and minimal trap states is still difficult to obtain. Herein we show that by incorporating a low boiling point alkyl halide such as iodomethane (CH3I) into the precursor solution, a perovskite (CH3NH3PbI3-xClx) film with improved grain size and orientation can be easily achieved. More importantly, these films exhibit a significantly reduced amount of trap states. Record photoluminescence lifetimes of more than 4 mu s are achieved; these lifetimes are significantly longer than that of pristine CH3NH3PbI3-xClx films. Planar heterojunction solar cells incorporating these CH3I-mediated perovskites have demonstrated a dramatically increased power conversion efficiency compared to the ones using pristine CH3NH3PbI3-xClx. Photoluminescence, transient absorption, and microwave detected photoconductivity measurements all provide consistent evidence that CH3I addition increases the number of excitons generated and their diffusion length, both of which assist efficient carrier transport in the photovoltaic device. The simple incorporation of alkyl halide to enhance perovskite surface passivation introduces an important direction for future progress on high efficiency perovskite optoelectronic devices.
|
|
| 35. |
- Xu, Weidong, et al.
(författare)
-
Precisely Controlling the Grain Sizes with an Ammonium Hypophosphite Additive for High-Performance Perovskite Solar Cells
- 2018
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 28:33
-
Tidskriftsartikel (refereegranskat)abstract
- A facile approach to precisely control the perovskite grain sizes is proposed and demonstrated for high-performance photovoltaic (PV) solar cells. With the introduction of various amounts of NH4H2PO2 (AHP) additives into the PbI2/CH3NH3I precursors, the grain scale of CH3NH3PbI3 films can be finely turned from hundreds of nanometer to micrometer scale, allowing evaluating the effects of crystalline grain boundary on trap densities, charge recombination, and PV device performance. The X-ray diffraction and X-ray photoelectron spectroscopy measurements indicate that the formation of intermediates plays a key role in assisting the perovskite crystal growth. The optimized devices show much larger open-circuit voltages (V-OC) up to 1.10 +/- 0.02 V and significantly enhance power conversion efficiencies (PCEs) of 16.5 +/- 0.7%, as compared to the control devices with PCE of 9.4 +/- 1.0% and V-OC of 1.00 +/- 0.03 V. Further investigations confirm that the boosted PV performance origins from the decreased defect densities due to enlarged grain sizes. It is also demonstrated that the approach is general and applicable to other perovskite systems, e.g., HC(NH2)(2)PbI3. The results suggest the promising application of AHP in achieving high-performance perovskite PV devices, and shed light on understanding the grain boundary effects on perovskite optoelectronics.
|
|
| 36. |
- Xu, Yan, et al.
(författare)
-
Reduced-order modeling of train-curved-slab-track dynamics with the effects of fastening failures
- 2022
-
Ingår i: Acta Mechanica Sinica. - : Springer Nature. - 0567-7718 .- 0459-1879 .- 1614-3116. ; 38
-
Tidskriftsartikel (refereegranskat)abstract
- Fastening failures have frequently been found on China high-speed railway curved tracks in recent years. Thus the influence of fastening failures on high-speed train-track interaction in curved track needs to be analyzed. A train-curved slab track interaction model is built, in which the real shape of the curved rail is considered and modeled with reduced beam model (RBM) and curved beam theory, and the slabs are modeled with four-nodes Kirchhoff-Love plate elements. The present model is validated at first with different traditional models. Then the influence of fastening failure in curved slab track on train-track interaction dynamics is studied. A different number of failed fastenings is assumed to occur at the curved track, and different types of fastening failure including the fatigue fracture of the clip structure and failure of the rail pad are considered. Based on the calculation results, the fatigue fracture of the clip structure has little influence on train-track interaction dynamics. But when rail pad failure happens and its equivalent vertical stiffness and damping are less than one-tenth of its original, the fastening failure seriously affects the high-speed train operation safety, and it must be prevented
|
|
| 37. |
- Yu, Hongling, et al.
(författare)
-
Efficient and Tunable Electroluminescence from In Situ Synthesized Perovskite Quantum Dots
- 2019
-
Ingår i: Small. - : WILEY-V C H VERLAG GMBH. - 1613-6810 .- 1613-6829. ; 15:8
-
Tidskriftsartikel (refereegranskat)abstract
- Semiconductor quantum dots (QDs) are among the most promising next-generation optoelectronic materials. QDs are generally obtained through either epitaxial or colloidal growth and carry the promise for solution-processed high-performance optoelectronic devices such as light-emitting diodes (LEDs), solar cells, etc. Herein, a straightforward approach to synthesize perovskite QDs and demonstrate their applications in efficient LEDs is reported. The perovskite QDs with controllable crystal sizes and properties are in situ synthesized through one-step spin-coating from perovskite precursor solutions followed by thermal annealing. These perovskite QDs feature size-dependent quantum confinement effect (with readily tunable emissions) and radiative monomolecular recombination. Despite the substantial structural inhomogeneity, the in situ generated perovskite QDs films emit narrow-bandwidth emission and high color stability due to efficient energy transfer between nanostructures that sweeps away the unfavorable disorder effects. Based on these materials, efficient LEDs with external quantum efficiencies up to 11.0% are realized. This makes the technologically appealing in situ approach promising for further development of state-of-the-art LED systems and other optoelectronic devices.
|
|
| 38. |
- Yuan, Zhongcheng, et al.
(författare)
-
Interface-assisted cation exchange enables high-performance perovskiteLEDs with tunable near-infrared emissions
- 2022
-
Ingår i: Joule. - : Cell Press. - 2542-4351. ; 6:10, s. 2423-2436
-
Tidskriftsartikel (refereegranskat)abstract
- Achieving high-quality cesium-formamidinium lead iodide (CsxFA1_xPbI3) perovskites with tunable band gaps is highly desired for optoelectronic applications including solar cells and light -emit-ting diodes (LEDs). Herein, by utilizing an alkaline-interface-assisted cation-exchange method, we fabricate highly emissive CsxFA1_x PbI3 perovskite films with fine-tunable Cs-FA alloying ratio for emis-sion-tunable near-infrared (NIR) LEDs. We reveal that the deproto-nation of FA+ cations and the formation of hydrogen-bonded gels consisting of CsI and FA facilitated by the zinc oxide underneath effectively removes the Cs-FA ion-exchange barrier, promoting the formation of phase-pure CsxFA1_xPbI3 films with tunable emis-sions filling the gap between that of pure Cs-and FA-based perov-skites. The obtained NIR perovskite LEDs (PeLEDs) peaking from 715 to 780 nm simultaneously demonstrate high peak external quantum efficiencies of over 15%, maximum radiances exceeding 300 W sr_1 m_2, and high power conversion efficiencies above 10% at 100 mA cm_2, representing the best-performing LEDs based on solution-processed NIR emitters in a similar region.
|
|
| 39. |
- Yuan, Zhongcheng, et al.
(författare)
-
Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites are emerging as promising semiconductors for cost-effective and high-performance light-emitting diodes (LEDs). Previous investigations have focused on the optimisation of the emissive perovskite layer, for example, through quantum confinement to enhance the radiative recombination or through defect passivation to decrease non-radiative recombination. However, an in-depth understanding of how the buried charge transport layers affect the perovskite crystallisation, though of critical importance, is currently missing for perovskite LEDs. Here, we reveal synergistic effect of precursor stoichiometry and interfacial reactions for perovskite LEDs, and establish useful guidelines for rational device optimization. We reveal that efficient deprotonation of the undesirable organic cations by a metal oxide interlayer with a high isoelectric point is critical to promote the transition of intermediate phases to highly emissive perovskite films. Combining our findings with effective defect passivation of the active layer, we achieve high-efficiency perovskite LEDs with a maximum external quantum efficiency of 19.6%.
|
|
| 40. |
- Zambrana-Puyalto, Xavier, et al.
(författare)
-
A hybrid metal–dielectric zero mode waveguide for enhanced single molecule detection
- 2019
-
Ingår i: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1359-7345 .- 1364-548X. ; 55:65, s. 9725-9728
-
Tidskriftsartikel (refereegranskat)abstract
- We fabricated hybrid metal–dielectric nanoslots and measured their optical response at three different wavelengths. The nanostructure is fabricated on a bilayer film formed by the sequential deposition of silicon and gold on a transparent substrate. The optical characterization is done via fluorescence spectroscopy measurements. We characterized the fluorescence enhancement, as well as the lifetime and the detection volume reduction for each wavelength. We observe that the hybrid metal–dielectric nanoslots behave as enhanced zero mode waveguides in the near-infrared spectral region. Their detection volume is such that they can perform enhanced single-molecule detection at tens of μM. We compared their behavior with that of a golden ZMW, and we demonstrated that the dielectric silicon layer improves both the optical performance and the stability of the device.
|
|
| 41. |
- Zhang, Weidong, et al.
(författare)
-
Algebraic solution to H2 control problems : II. The multivariable decoupling case
- 2006
-
Ingår i: Industrial & Engineering Chemistry Research. - : American Chemical Society (ACS). - 0888-5885 .- 1520-5045. ; 45:21, s. 7163-7176
-
Tidskriftsartikel (refereegranskat)abstract
- The control of multivariable systems with time delays is an important problem in linear control systems. The goal of this paper is to develop an algebraic design method for multivariable systems with multiple time delays. In the method, the algebra-based input-output design technique is adopted, because it is easy to understand and use, and it requires no state variables. We focus mainly on decoupled response. First, all stabilizing decoupling controllers are parametrized. Second, the optimal decoupling controller is derived by minimizing the sensitivity function. Finally, the performance and robustness are analyzed and a simple tuning rule is developed for quantitative performance and robustness. The most important feature of the proposed method is that the controller is optimal, analytical, and can provide decoupling response. Typical examples are provided to illustrate the proposed method
|
|
| 42. |
- Zhang, Weidong, et al.
(författare)
-
An MPSK Millimeter-Wave Point-to-Point Link With Radio Over Fiber Synchronous Baseband Receiver
- 2022
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 40:2, s. 481-489
-
Tidskriftsartikel (refereegranskat)abstract
- This paper demonstrates a millimeter-wave point-to-point radio link of MPSK (QPSK, 8-PSK, and 16-PSK) modulation without using any analog to digital converter (ADC). The proposed point-to-point radio link, not only use the radio over fiber (RoF) concept to extend the transmit distance of the central unit and the remote radio unit, but also use the clock and data recovery (CDR) applied in the optical-electrical converter (OEC) to recover the MPSK intermediate frequency (IF) signals frequency offset. Compared with the traditional RoF link, the proposed point-to-point synchronous radio link eliminated the high-speed ADC requirement for the digital-intermediate-frequency-over-fiber (DIFoF) link, which can significantly reduce the complexity and the cost of the remote radio unit. Simultaneously, we have designed a simple symbol synchronization algorithm to realize the real-time point-to-point radio link on an Field Programmable Gate Array (FPGA). The proposed millimeter-wave radio link has successfully demonstrated 6 Gbps QPSK transmission and can tolerate a frequency offset up to 100 MHz.
|
|
| 43. |
- Zhang, Weidong, et al.
(författare)
-
Multivariable smith predictors design for nonsquare plants
- 2006
-
Ingår i: IEEE Transactions on Control Systems Technology. - 1063-6536 .- 1558-0865. ; 14:6, s. 1145-1149
-
Tidskriftsartikel (refereegranskat)abstract
- The goal of this brief is to provide a solution to the optimal design problem of decoupled multivariable Smith Predictor for general linear stable plants with multiple time delays. The design procedure is divided into three steps. In the first step, a nonsquare plant is factored into the "delay free" part and delay part, and the "delay free" part is further factored into minimum phase part and nonminimum phase part. In the second step, the factorization is utilized to analytically derive the optimal multivariable Smith Predictor based on only output feedback. Finally, the controller is shaped by a filter for specified inputs and a simple procedure is developed to quantitatively tune the closed-loop response expressed in time domain or frequency domain
|
|
| 44. |
- Zhang, Wei, et al.
(författare)
-
Thermal detection of surface plasmons on gold nanohole arrays
- 2012
-
Ingår i: Chinese Science Bulletin. - : Springer Science and Business Media LLC. - 1001-6538 .- 1861-9541. ; 57:1, s. 68-71
-
Tidskriftsartikel (refereegranskat)abstract
- We used a thin-film thermocouple to detect the thermal effect of surface plasmons excited in Au nanohole array structures. We found that the thermal electromotive force of Au film with periodic nanohole structures is three times greater than that of a bare Au film for 785-nm laser excitation at a given power. This effect is caused by the resonant excitation of localized surface plasmons in the nanoholes. In addition, we found that the thermal electromotive force (EMF) of the Au film with dumbbell-like nanohole arrays depends strongly on the incident polarization. The thermal EMF is the greatest when the excitation light is polarized perpendicular to the long axis of the dumbbell.
|
|
| 45. |
- Zhang, Xiaoyang, et al.
(författare)
-
A multi-sensor based online tool condition monitoring system for milling process
- 2018
-
Ingår i: Procedia CIRP. - : Elsevier. - 2212-8271 .- 2212-8271. ; 72, s. 1136-1141
-
Tidskriftsartikel (refereegranskat)abstract
- Tool condition monitoring has been considered as one of the key enabling technologies for manufacturing optimization. Due to the high cost and limited system openness, the relevant developed systems have not been widely adopted by industries, especially Small and Medium-sized Enterprises. In this research, a cost-effective, wireless communication enabled, multi-sensor based tool condition monitoring system has been developed. Various sensor data, such as vibration, cutting force and power data, as well as actual machining parameters, have been collected to support efficient tool condition monitoring and life estimation. The effectiveness of the developed system has been validated via machining cases. The system can be extended to wide manufacturing applications.
|
|
