| 1. |
- Byrne, Paul K., et al.
(författare)
-
The geometry of volcano flank terraces on Mars
- 2009
-
Ingår i: Earth and Planetary Science Letters. - : Elsevier BV. - 0012-821X .- 1385-013X. ; 281:1-2, s. 1-13
-
Tidskriftsartikel (refereegranskat)abstract
- Flank terraces are subtle, expansive structures on the slopes of many large Martian shield volcanoes. Several terrace formation hypotheses - including self-loading, lithospheric flexure, magma chamber tumescence, volcano spreading, and shallow gravitational slumping - have been suggested. Terraces are not readily visible on photogeological data; consequently, terrace geometry has not yet been comprehensively described. Terrace provenance, therefore, is poorly understood. We used three-dimensional Mars Orbiter Laser Altimeter (MOLA) data to characterise the geometry of these elusive structures, with a view to understanding better the role that flank terraces play in the tectonic evolution of volcanoes on Mars. Terraces have a broad, convex-upward profile in section, and a systematic "fish scale" imbricate stacking pattern in plan. They are visible at all elevations, on at least nine disparate Martian volcanoes. Terrace-like features also occur on three shield volcanoes on Earth, an observation not recorded before. Analysis of a suite of morphometric parameters for flank terraces showed that they are scale-invariant. with similar proportions to thrust faults on Earth. We compared predicted formation geometries to our terrace observations, and found that only lithospheric flexure can fully account for the morphology, distribution, and timing of terraces. As a volcano flexes into the lithosphere beneath it, its upper surface will experience a net reduction in area, resulting in the formation of outward verging thrusts. We conclude, therefore, that flank terraces are fundamental volcanotectonic structures, that they are the surface expressions of thrust faults, probably formed by lithospheric flexure. and that they are not restricted to Mars.
|
|
| 2. |
|
|
| 3. |
- Galland, Olivier, et al.
(författare)
-
Laboratory Modelling of Volcano Plumbing Systems : A Review
- 2015
-
Ingår i: Advances in Volcanology. - Cham : Springer Berlin/Heidelberg.
-
Bokkapitel (refereegranskat)abstract
- We review the numerous experimental studies dedicated to unravelling the physics and dynamics of various parts of a volcanic plumbing system. Section 1 lists the model materials commonly used for model magmas or model rocks. We describe these materials’ mechanical properties and discuss their suitability for modelling sub-volcanic processes. Section 2 examines the fundamental concepts of dimensional analysis and similarity in laboratory modelling. We provide a step-by-step explanation of how to apply dimensional analysis to laboratory models in order to identify fundamental physical laws that govern the modelled processes in dimensionless (i.e. scale independent) form. Section 3 summarises and discusses the past applications of laboratory models to understand numerous features of volcanic plumbing systems. These include: dykes, cone sheets, sills, laccoliths, caldera-related structures, ground deformation, magma/fault interactions, and explosive vents. We outline how laboratory models have yielded insights into the main geometric and mechanical controls on the development of each part of the volcanic plumbing system. We conclude with some perspectives on the limitations of past and current analogue modelling approaches, and on challenges to be addressed by future research.
|
|
| 4. |
- Mathieu, Lucie, et al.
(författare)
-
Dykes, cups, saucers and sills : analogue experiments on magma intrusion into brittle rocks
- 2008
-
Ingår i: Earth and Planetary Science Letters. - : Elsevier BV. - 0012-821X .- 1385-013X. ; 271:1-4, s. 1-13
-
Tidskriftsartikel (refereegranskat)abstract
- Magma is transported in the crust by blade-like intrusions such as dykes, sills, saucers, and also collects in thicker laccoliths, lopoliths and plutons. Recently, the importance and great number of shallow (< ;5 km) saucer-shaped intrusions has been recognized. Lopoliths and cup-shaped intrusions have also been reported in many geological contexts. Our field observations indicate that many intrusions, especially those emplaced into breccias or fractured rocks, have bulging, lobate margins and have shear faults at their bulbous terminations. Such features suggest that magma can propagate along a self-induced shear fault rather than a hydraulic tension-fracture. To investigate this we use analogue models to explore intrusion propagation in a brittle country rock. The models consist of the injection of analogue magma (honey or Golden syrup) in a granular material (sand or sieved ignimbrite) that is a good analogue for brittle or brecciated rocks. These models have the advantage (over other models that use gelatin) to well represent the properties of brittle materials by allowing both shear-faults and tension fractures to be produced at suitable stresses. In our experiments we mainly obtain vertical dykes and inverted-cone like structures that we call cup-shaped intrusions. Dykes bifurcate into cup-shaped intrusions at depths depending on their viscosity. All cup-shaped intrusions uplift a central block. By injecting against a vertical glass plate we obtain detailed observations of the intrusion propagation style. We observe that dykes commonly split and produce cup-shaped intrusions near the surface and that shear zone-related intrusions develop at the dyke tip. We conclude that many dykes propagate as a viscous indenter resulting from shear failure of host rock rather than tensional hydraulic fracturing of host rocks. The shear propagation model provides an explanation for the shape and formation of cup-shaped intrusions, saucer-sills and lopoliths.
|
|
| 5. |
- Mathieu, Lucie, et al.
(författare)
-
The interaction between volcanoes and strike-slip, transtensional and transpressional fault zones : Analogue models and natural examples
- 2011
-
Ingår i: Journal of Structural Geology. - : Elsevier BV. - 0191-8141 .- 1873-1201. ; 33:5, s. 898-906
-
Tidskriftsartikel (refereegranskat)abstract
- Regional strike-slip faulting can control magma movements, deform volcanoes and may destabilise their flanks. The aim of this study is to address this problem by comparing two natural examples, Basse Terre Island volcanoes, Lesser Antilles and Maderas volcano, Nicaragua, with analogue experiments. The field and remote sensing analyses of their structures reveal that Guadeloupe volcanoes, which developed in a 145 degrees-striking sinistral transtensional fault zone, are dominantly fractured in a 090 degrees-120 degrees direction, which is parallel to the maximum principal horizontal stress and to the elongation direction of the summit graben of analogue models. This graben is bordered by the Sigmoid-I fault, or Y shear structure, and has facilitated the formation of the Beaugendre and Vieux-Habitants valleys by faulting, erosion or collapse. This structure has also influenced the injection of dykes and the transport of hydrothermal fluids. The comparison of Maderas volcano with the analogue models confirms that the volcano has developed parallel to a 135 degrees-striking dextral transtensional fault zone and is also gravitationally spreading over a weak substratum. This study illustrates how regional strike-slip faulting and gravitational loading combine to produce a clear set of structures within volcanic edifices, which control the location of intrusive zones, hydrothermal activity and collapse directions.
|
|
| 6. |
- Mathieu, Lucie, et al.
(författare)
-
The structure and morphology of the Basse Terre Island, Lesser Antilles volcanic arc
- 2013
-
Ingår i: Bulletin of Volcanology. - : Springer Science and Business Media LLC. - 0258-8900 .- 1432-0819. ; 75:3, s. 700-
-
Tidskriftsartikel (refereegranskat)abstract
- Basse Terre Island is made up of a cluster of composite volcanoes that are part of the Lesser Antilles volcanic arc. The morphology of these volcanoes and the onshore continuation of the grabens and strike-slip faults that surround the island are poorly documented due to erosion and rainforest cover. Therefore, we conducted a morphological analysis of the island using Digital Elevation Model (DEM) data integrated with field observations to document erosional, constructional, and deformational processes. A DEM-based analysis of 1,249 lineaments and field structural measurements of 16 normal faults, 3,741 veins and fractures, and 46 dykes was also carried to document the structures that predominate in sub-surface rocks. The results indicate that the over 1-My-old and elongated Northern Chain volcano, which makes up the northern half of the island, was built by high eruption rates and/or a low viscosity magma injected along the N-S to NNW-SSE-striking extensional structures formed by the flexure of the lithosphere by the overall subduction regime. After 1 Ma, the southern half of the island was shaped by an alignment of conical volcanoes, likely built by a more viscous magma type that was guided by the NW-SE-striking Montserrat-Bouillante strike-slip fault system. These N to NNW and NW structural directions are however poorly expressed onshore, possibly due to slow slip motion. The sub-surface rocks mostly contain E-W-striking structures, which have likely guided the many flank instabilities documented in the studied area, and guide hydrothermal fluids and shallow magmatic intrusions. These structures are possibly part of the E-W-striking Marie-Gallante offshore graben.
|
|
| 7. |
- Troll, Valentin, et al.
(författare)
-
Pre-Teide Volcanic Activity on the Northeast Volcanic Rift Zone
- 2013
-
Ingår i: Teide Volcano. - Berlin, Heidelberg : Springer Berlin/Heidelberg. - 9783642258923 - 9783642258930 ; , s. 75-92
-
Bokkapitel (refereegranskat)abstract
- The northeast rift zone of Tenerife (NERZ) presents a partially eroded volcanic rift that offers a superb opportunity to study the structure and evolution of oceanic rift zones. Field data, structural observations, isotopic dating, magnetic stratigraphy, and isotope geochemistry have recently become available for this rift and provide a reliable temporal framework for understanding the structural and petrological evolution of the entire rift zone. The NERZ appears to have formed in several major pulses of activity with a particularly high production rate in the Pleistocene (ca. 0.99 and 0.56 Ma). The rift underwent several episodes of flank creep and eventual catastrophic collapses driven by intense intrusive activity and gravitational adjustment. Petrologically, a variety of mafic rock types, including crystal-rich ankaramites, have been documented, with most samples isotopically typical of the “Tenerife signal”. Some of the NERZ magmas also bear witness to contamination by hydrothermally altered components of the island edifice and/or sediments. Isotope geochemistry furthermore points to the generation of the NERZ magmas from an upwelling column of mantle plume material mixed with upper asthenospheric mantle. Finally, persistent isotopic similarity through time between the NERZ and the older central edifices on Tenerife provides strong evidence for a genetic link between Tenerife’s principal volcanic episodes.
|
|
