| 1. |
- Pasquini, Luca, et al.
(författare)
-
Magnesium- and intermetallic alloys-based hydrides for energy storage : modelling, synthesis and properties
- 2022
-
Ingår i: Progress in Energy. - : Institute of Physics Publishing (IOPP). - 2516-1083. ; 4:3
-
Forskningsöversikt (refereegranskat)abstract
- Hydrides based on magnesium and intermetallic compounds provide a viable solution to the challenge of energy storage from renewable sources, thanks to their ability to absorb and desorb hydrogen in a reversible way with a proper tuning of pressure and temperature conditions. Therefore, they are expected to play an important role in the clean energy transition and in the deployment of hydrogen as an efficient energy vector. This review, by experts of Task 40 'Energy Storage and Conversion based on Hydrogen' of the Hydrogen Technology Collaboration Programme of the International Energy Agency, reports on the latest activities of the working group 'Magnesium- and Intermetallic alloys-based Hydrides for Energy Storage'. The following topics are covered by the review: multiscale modelling of hydrides and hydrogen sorption mechanisms; synthesis and processing techniques; catalysts for hydrogen sorption in Mg; Mg-based nanostructures and new compounds; hydrides based on intermetallic TiFe alloys, high entropy alloys, Laves phases, and Pd-containing alloys. Finally, an outlook is presented on current worldwide investments and future research directions for hydrogen-based energy storage.
|
|
| 2. |
- Gosalawit-Utke, Rapee, et al.
(författare)
-
Ca(BH4)(2)-MgF2 Reversible Hydrogen Storage: Reaction Mechanisms and Kinetic Properties
- 2011
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:9, s. 3762-3768
-
Tidskriftsartikel (refereegranskat)abstract
- A composite of Ca(BH4)(2)-MgF2 is proposed as a reversible hydrogen storage system. The dehydrogenation and rehydrogenation reaction mechanisms are investigated by in situ time-resolved synchrotron radiation powder X-ray diffraction (SR-PXD) and Raman spectroscopy. The formation of an intermediate phase (CaF2-xHx) is observed during rehydrogenation. The hydrogen content of 4.3 wt % is obtained within 4 h during the first dehydrogenation at isothermal and isobaric conditions of 330 degrees C and 0.5 bar H-2, respectively. The cycling efficiency is evaluated by three release and uptake cycles together with absorbed hydrogen content in the range 5.1-5.8 wt % after 2.5 h (T = 330 degrees C and p(H-2) = 130 bar). The kinetic properties on the basis of hydrogen absorption are comparable for all cycles. As compared to pure Ca(BH4)(2) and Ca(BH4)(2)-MgH2 composite, Ca(BH4)(2)-MgF2 composite reveals the kinetic destabilization and the reproducibility of hydrogen storage capacities during cycling, respectively.
|
|
| 3. |
- Hirscher, Michael, et al.
(författare)
-
Materials for hydrogen-based energy storage - past, recent progress and future outlook
- 2020
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 827
-
Tidskriftsartikel (refereegranskat)abstract
- Globally, the accelerating use of renewable energy sources, enabled by increased efficiencies and reduced costs, and driven by the need to mitigate the effects of climate change, has significantly increased research in the areas of renewable energy production, storage, distribution and end-use. Central to this discussion is the use of hydrogen, as a clean, efficient energy vector for energy storage. This review, by experts of Task 32, Hydrogen-based Energy Storage of the International Energy Agency, Hydrogen TCP, reports on the development over the last 6 years of hydrogen storage materials, methods and techniques, including electrochemical and thermal storage systems. An overview is given on the background to the various methods, the current state of development and the future prospects. The following areas are covered; porous materials, liquid hydrogen carriers, complex hydrides, intermetallic hydrides, electrochemical storage of energy, thermal energy storage, hydrogen energy systems and an outlook is presented for future prospects and research on hydrogen-based energy storage.
|
|
| 4. |
- Puszkiel, Julian, et al.
(författare)
-
Hydrogen storage in Mg-LiBH4 composites catalyzed by FeF3
- 2014
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 1873-2755 .- 0378-7753. ; 267, s. 799-811
-
Tidskriftsartikel (refereegranskat)abstract
- Mg-10 mol% LiBH4 composite plus small amounts of FeF3 is investigated in the present work. The presence of LiBH4 during the milling process noticeably modifies the size and morphology of the Mg agglomerates, leading to faster hydrogenation and reaching almost the theoretical hydrogen capacity owing to enhanced hydrogen diffusion mechanism. However, the dehydrogenation of the system at low temperatures (<= 300 degrees C) is still slow. Thus, FeF3 addition is proposed to improve the dehydrogenation kinetic behavior. From experimental results, it is found that the presence of FeF3 results in an additional size reduction of the Mg agglomerates between similar to 10 and similar to 100 mu m and the formation of stable phases such as MgF2, LiF and FeB. The FeB species might have a catalytic effect upon the MgH2 decomposition. As a further result of the FeF3 addition, the Mg-10 mol%LiBH4-5 mol% FeF3 material shows improved dehydrogenation properties: reduced dehydrogenation activation energy, faster hydrogen desorption rate and reversible hydrogen capacities of about 5 wt% at 275 degrees C. (C) 2014 Elsevier B.V. All rights reserved.
|
|
| 5. |
- Puszkiel, Julian, et al.
(författare)
-
Sorption behavior of the MgH2-Mg2FeH6 hydride storage system synthesized by mechanical milling followed by sintering
- 2013
-
Ingår i: International Journal of Hydrogen Energy. - : Elsevier BV. - 1879-3487 .- 0360-3199. ; 38:34, s. 14618-14630
-
Tidskriftsartikel (refereegranskat)abstract
- The hydrogen sorption behavior of the Mg2FeH6-MgH2 hydride system is investigated via in-situ synchrotron and laboratory powder X-ray diffraction (SR-PXD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), particle size distribution (PSD) and volumetric techniques. The Mg2FeH6-MgH2 hydride system is obtained by mechanical milling in argon atmosphere followed by sintering at high temperature and hydrogen pressure. In-situ SR-PXD results show that upon hydriding MgH2 is a precursor for Mg2FeH6 formation and remained as hydrided phase in the obtained material. Diffusion constraints preclude the further formation of Mg2FeH6. Upon dehydriding, our results suggest that MgH2 and Mg2FeH6 decompose independently in a narrow temperature range between 275 and 300 degrees C. Moreover, the decomposition behavior of both hydrides in the Mg2FeH6-MgH2 hydride mixture is influenced by each other via dual synergetic-destabilizing effects. The final hydriding/dehydriding products and therefore the kinetic behavior of the Mg2FeH6-MgH2 hydride system exhibits a strong dependence on the temperature and pressure conditions. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
|
|
