| 1. |
|
|
| 2. |
-
INNOTRACK: Concluding technical report
- 2010
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- The track structure, rails, switches and crossings account for more than 50% of maintenance and renewal costs for the rail industry. To improve the competitiveness of rail transportation, the cost-efficiency of these areas needs to be addressed.This the background to INNOTRACK, an integrated research project funded by the European Commission’s 6th research framework pro- gramme. Running from September 2006 to December 2009, INN- OTRACK has developed a multitude of innovative solutions in the areas of track substructure, rails & welds, and switches & crossings. The solutions have been assessed from technical, logistics and life cycle cost point of views.This Concluding Technical Report of INNOTRACK includes an overview of the project. It further details implementable results, and clusters them into ”highlight” areas. In addition, the book acts as a ”key” to the vast amount of information from INNOTRACK: All sections refer to project reports where more information can be found.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Stylidis, Kostas, 1978, et al.
(författare)
-
Perceived quality framework in product generation engineering: an automotive industry example
- 2019
-
Ingår i: Design Science. - : Cambridge University Press (CUP). - 2053-4701 .- 2053-4701. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Perceived quality refers to customers’ cognitive and emotional responses to a particular design, often also associated with craftsmanship and customer satisfaction. Previous research defined a taxonomy of perceived quality and provided understanding about how engineering design decisions impact customer satisfaction. Furthermore, development of new products is frequently based on carrying over attributes of existing products, either from the same producer or from competitors. Previous research offered a new product development methodology combining variations of subsystems to carry over from existing products. This brief presents how these two lines of research combined to design the central console of the Porsche Panamera automobile and discusses the opportunities and challenges posed in the practical implementation of this research.
|
|
| 6. |
- Nybacka, Mikael, et al.
(författare)
-
Project: CASTT - Centre for Automotive Systems Technologies and Testing
- 2007
-
Annan publikation (populärvet., debatt m.m.)abstract
- Through the Centre for Automotive Systems Technologies and Testing, Luleå University of Technology aims to first of all support automotive winter testing in Northern Sweden. This means to support the local automotive test entrepreneurs and through them their customers: the car manufacturers and their suppliers. To succeed in this task, the center relies on the university's areas of leading research and most importantly on the cooperation between those areas.
|
|
| 7. |
- Heshmati, Mohsen, 1987, et al.
(författare)
-
Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy
- 2017
-
Ingår i: Materials and Design. - : Elsevier BV. - 1873-4197 .- 0264-1275. ; 122, s. 433-447
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, adhesive bonding has found its way to construction applications such as bridges. Given the harsh conditions that such structures are usually exposed to, it is necessary to account for environmental factors, particularly moisture and temperature, in the design phase. Cohesive zone modelling has attracted much attention in the last decade as a promising method to design adhesive joints. Despite this interest, the effects of moisture and thermal cycles on cohesive laws have not been investigated to the knowledge of the authors. In this paper, we present a method to directly measure the environmental-dependent cohesive laws of a structural adhesive loaded in pure Mode-I and Mode-II. Special consideration is given to overcome issues such as the time-consuming nature of moisture ingression and specimen dimensions, which could be problematic due to the size-limitations of conditioning equipment. The accuracy of this method was verified through simulation of the experiments using the finite element analysis. The effects of exposure to 95% relative humidity, immersion in saltwater and distilled water, and freeze-thaw cycles in the presence or absence of moisture were investigated. The results indicate the damaging effects of combined saltwater and freeze-thaw cycles which were clearly reflected on the shape of the cohesive laws.
|
|
| 8. |
- Eriksson, Sören, 1953-
(författare)
-
China's aircraft industry: collaboration and technology transfer - the case of Airbus
- 2010
-
Ingår i: International Journal of Technology Transfer and Commercialisation (IJTTC). - : Inderscience Enterprises Ltd. - 1470-6075 .- 1741-5284. ; 9:4, s. 306-325
-
Tidskriftsartikel (refereegranskat)abstract
- China has moved a long way in economic and industrial development during the last decades and has developed into a global player in many industries. With increased knowledge in high-technology industries, China has ambitions to move into sectors that necessitate a high level of research and development, such as the aerospace industry. China is now in the process of establishing a modern aircraft industry based on domestic efforts as well as agreements with foreign partners in the manufacturing of complete aircraft. This paper analyzes what measures have been taken by Airbus in the form of technology transfer and other supportive measures to strengthen its position in the Chinese market. The findings conclude that Airbus’ transfer should be looked upon as a broad spectrum of technology and knowledge transfer, which include aircraft manufacturing technology, as well as cabin crew training centre, establishment of a warehouse and suppliers ”village”, an engineering centre, maintenance and various service functions.
|
|
| 9. |
- Chen, Zhe, et al.
(författare)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Tidskriftsartikel (refereegranskat)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 10. |
- Skagestad, Ragnhild, 1978, et al.
(författare)
-
GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks
- 2017
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- GCCSI Webinar: Cutting Cost of CO2 Capture in Process Industry (CO2stCap) Project overview & first results for partial CO2 capture at integrated steelworks This publication has the format of a webinar: The CO2StCap project is a four year initiative carried out by industry and academic partners with the aim of reducing capture costs from CO2 intensive industries (more information here). The project, led by Tel-Tek, is based on the idea that cost reduction is possible by capturing only a share of the CO2 emissions from a given facility, instead of striving for maximized capture rates. This can be done in multiple ways, for instance by capturing only from the largest CO2 sources at individual multi-stack sites utilising cheap waste heat or adapting the capture volumes to seasonal changes in operations. The main focus of this research is to perform techno-economic analyses for multiple partial CO2 capture concepts in order to identify economic optimums between cost and volumes captured. In total for four different case studies are developed for cement, iron & steel, pulp & paper and ferroalloys industries. The first part of the webinar gave an overview of the project with insights into the cost estimation method used. The second part presented the iron & steel industry case study based on the Lulea site in Sweden, for which waste-heat mapping methodology has been used to assess the potential for partial capture via MEA-absorption. Capture costs for different CO2 sources were discussed, demonstrating the viability of partial capture in an integrated steelworks.
|
|
| 11. |
- Liu, Yuanhua, 1971, et al.
(författare)
-
Considering the importance of user profiles in interface design
- 2009
-
Ingår i: User Interfaces. ; , s. 23-
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- User profile is a popular term widely employed during product design processes by industrial companies. Such a profile is normally intended to represent real users of a product. The ultimate purpose of a user profile is actually to help designers to recognize or learn about the real user by presenting them with a description of a real user’s attributes, for instance; the user’s gender, age, educational level, attitude, technical needs and skill level. The aim of this chapter is to provide information on the current knowledge and research about user profile issues, as well as to emphasize the importance of considering these issues in interface design. In this chapter, we mainly focus on how users’ difference in expertise affects their performance or activity in various interaction contexts. Considering the complex interaction situations in practice, novice and expert users’ interactions with medical user interfaces of different technical complexity will be analyzed as examples: one focuses on novice and expert users’ difference when interacting with simple medical interfaces, and the other focuses on differences when interacting with complex medical interfaces. Four issues will be analyzed and discussed: (1) how novice and expert users differ in terms of performance during the interaction; (2) how novice and expert users differ in the perspective of cognitive mental models during the interaction; (3) how novice and expert users should be defined in practice; and (4) what are the main differences between novice and expert users’ implications for interface design. Besides describing the effect of users’ expertise difference during the interface design process, we will also pinpoint some potential problems for the research on interface design, as well as some future challenges that academic researchers and industrial engineers should face in practice.
|
|
| 12. |
- Esmaeili, Ali, 1983, et al.
(författare)
-
Modelling of temperature and strain rate dependent behaviour of pearlitic steel in block braked railway wheels
- 2021
-
Ingår i: Railway Engineering Science. - : Springer. - 2662-4745 .- 2662-4753. ; 29:4, s. 362-378
-
Tidskriftsartikel (refereegranskat)abstract
- Block braked railway wheels are subjected to thermal and rolling contact loading. The thermal loading results in high temperatures and thermal stresses which cause slow time dependent processes such as creep, relaxation and static recovery of the wheel material. At the same time, the rolling contact loading implies a very fast mechanical load application. This paper is focused on material modeling of pearlitic steel for a wide range of loading rates at elevated temperatures. The starting point is a viscoplasticity model including nonlinear isotropic and kinematic hardening. The Delobelle overstress function is employed to capture strain rate dependent response of the material. The model also includes static recovery of the hardening to capture slower viscous (diffusion dominated) behaviour of the material. Experiments for the pearlitic wheel steel ER7 in terms of cyclic strain-controlled uniaxial tests with hold-time, uniaxial ratchetting tests including rapid cycles and biaxial cyclic tests with tension/compression and torsion are used to calibrate the material model. These experiments were performed under isothermal conditions at different temperatures. In the ratchetting tests, higher loading rates are obtained and these have been used to calibrate the high strain rate response of the viscoplasticity model. The paper is concluded with a numerical example of a block braked wheel where the importance of accounting for the viscoplasticity in modelling is highlighted.
|
|
| 13. |
- Binder, Christian, 1988-, et al.
(författare)
-
Phosphor Thermometry for In-Cylinder Surface Temperature Measurements in Diesel Engines
- 2019
-
Ingår i: Measurement science and technology. - 0957-0233 .- 1361-6501.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Surface temperature measurements in technically relevant applications can be very hallenging and yet of great importance. Phosphor thermometry is a temperature measurement technique that has previously been employed in technically relevant applications to obtain surface temperature. The technique is based on temperature-dependent changes in a phosphor’s luminescence. To improve the accuracy and precision of temperature measurements with this technique, the present study considers, by way of example, the impact of conditions inside the cylinder of a diesel engine on decay time based phosphor thermometry. After an initial, general assessment of the effect of prevailing measurement conditions, this research investigates errors caused by soot luminosity, extinction, signal trapping and changes of phosphors’ luminescence properties due to exposure to the harsh environment. Furthermore, preferable properties of phosphors which are suitable for in-cylinder temperature measurements are discussed. 16 phosphors are evaluated, including four which – to the authors’ knowledge –have previously not been used in thermometry. Results indicate that errors due to photocathode bleaching, extinction, signal trapping and changes of luminescence properties may cause an erroneous temperature evaluation with temperature errors in the order of serval tens of Kelvin.
|
|
| 14. |
- Hosseini Bab Anari, Elham, 1982, et al.
(författare)
-
Fluorine-free salts for aqueous lithium-ion and sodium-ion battery electrolytes
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:88, s. 6, 85194-85201
-
Tidskriftsartikel (refereegranskat)abstract
- A first generation of fluorine-free lithium and sodium salts based on the concept of pseudo-delocalized anions has been synthesized with both high purity and yield using water as the solvent in the reaction medium. The salts have been fully characterized by Raman and FT-IR spectroscopies, thermogravimetry, and X-ray crystallography to reveal both basic properties in terms of thermal stability and solubility as well as the local, mainly ion–ion interaction dictated, coordination details and by ionic conductivity and electrochemical stability window measurements as aqueous electrolytes. Together a picture is created of the salts' promise as components in electrolytes – primarily aiming at application in low voltage fluorinefree aqueous lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs).
|
|
| 15. |
- Stylidis, Kostas, 1978, et al.
(författare)
-
Perceived quality of products: a framework and attributes ranking method
- 2020
-
Ingår i: Journal of Engineering Design. - : Informa UK Limited. - 1466-1837 .- 0954-4828. ; 31:1, s. 37-67
-
Tidskriftsartikel (refereegranskat)abstract
- Perceived quality is one of the most critical aspects of product development that defines the successful design. This paper presents a new approach to perceived quality assessment by examining its elements, decomposed into a structure with the bottom-up sensory approach from the level of basic (‘ground’) attributes, covering almost every aspect of quality perception from the engineering viewpoint. The paper proposes a novel method for perceived quality attributes relative importance ranking, resulting in the balanced perceived quality of the final product within the given conditions. The proposed method helps to reach the equilibrium of the product’s quality equation from the perspective of design effort, time, and costs estimations. The authors introduce the Perceived Quality Framework (PQF), which is the taxonomy system for perceived quality attributes and the core of the attributes importance ranking (PQAIR) method. The research outcomes are based on findings of the qualitative exploratory study, including European and North American premium and luxury automotive manufacturers. An empirical structural validity test was performed to assess the usability and rigour of the proposed method. The results indicate that perceived quality evaluation can be significantly improved during all stages of product development.
|
|
| 16. |
- Stylidis, Kostas, 1978
(författare)
-
Perceived Quality of Cars. A Novel Framework and Evaluation Methodology.
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The supremacy of the automotive manufacturers today is no longer driven by them achieving a superior manufacturing quality but increasingly depends on the customer’s quality perception. Average car consumers see a car’s quality as a fancy mixture of design, aesthetics, their own previous experiences and performance characteristics of the vehicle, unlike a combination of mechanical parts, software pieces, advanced materials, cutting-edge manufacturing processes, with technical knowledge, skills and high production volumes – all ingredients involved in the modern car creation. Perceived quality is one of the most critical aspects for product development that defines successful car design. Speaking of perceived quality, we are dealing with a complex, multifaceted adaptive system; a system where a human is the main agent. “Which product characteristics require the most attention for successful car design?” This is the question engineers and designers need to answer under the pressure of shrinking product development time, available technologies, and financial limitations, not to mention that the answer is expected to be given in numbers to sustain the fierce competition in today’s automotive industry. For this reason, the perceived quality must be understood and controlled during all stages of product development. The research presented in this thesis justifies the engineering viewpoint on perceived quality as an inevitable part of new product development. The core of this research is the Perceived Quality Framework (PQF), a taxonomy structure of perceived quality attributes and the Perceived Quality Attributes Importance Ranking (PQAIR) method, a novel method for perceived quality evaluation that can be applied to a variety of products, including cars. The PQF communicates the attribute-centric engineering viewpoint on quality perception, developed through cumulative studies in the premium and luxury market segment of the automotive industry. The PQAIR method equips engineers with practical tools for perceived quality evaluation. The proposed method helps to reach the equilibrium of the product’s quality equation from the perspective of design effort, time, and costs estimations. Altogether this introduces a new paradigm of perceived quality as the inevitable element integrated into the process of engineering endeavor regarding product attributes that communicates quality to the customer.
|
|
| 17. |
- Shahroozi, Zahra, 1992-
(författare)
-
Survivability control using data-driven approaches and reliability analysis for wave energy converters
- 2024
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Wave energy, with five times the energy density of wind and ten times the power density of solar, offers a compelling carbon-free electricity solution. Despite its advantages, ongoing debates surround the reliability and economic feasibility of wave energy converters (WECs). To address these challenges, this doctoral thesis is divided into four integral parts, focusing on optimizing the prediction horizon for power maximization, analyzing extreme waves' impact on system dynamics, ensuring reliability, and enhancing survivability in WECs.Part I emphasizes the critical importance of the prediction horizon for maximal power absorption in wave energy conversion. Using generic body shapes and modes, it explores the effect of dissipative losses, noise, filtering, amplitude constraints, and real-world wave parameters on the prediction horizon. Findings suggest achieving optimal power output may be possible with a relatively short prediction horizon, challenging traditional assumptions.Part II shifts focus to WEC system dynamics, analyzing extreme load scenarios. Based on a 1:30 scaled wave tank experiment, it establishes a robust experimental foundation, extending into numerical assessment of the WEC. Results underscore the importance of damping to alleviate peak forces. Investigating various wave representations highlights conservative characteristics of irregular waves, crucial for WEC design in extreme sea conditions.Part III explores the computational intricacies of environmental design load cases and fatigue analyses for critical mechanical components of the WEC. The analysis is conducted for hourly sea state damage and equivalent two-million-cycle loads. Finally, a comparison of safety factors between the ultimate limit state and fatigue limit state unfolds, illustrating the predominant influence of the ultimate limit state on point-absorber WEC design.Part IV, centers on elevating survivability strategies for WECs in extreme wave conditions. Three distinct controller system approaches leverage neural networks to predict and minimize the line force. Distinct variations emerge in each approach, spanning from rapid detection of optimal damping to integrating advanced neural network architectures into the control system with feedback. The incorporation of a controller system, refined through experimental data, showcases decreases in the line force, providing a practical mechanism for real-time force alleviation.This thesis aims to contribute uniquely to the goal of advancing wave energy conversion technology through extensive exploration.
|
|
| 18. |
|
|
| 19. |
- Sarkar, Saptarshi, 1992, et al.
(författare)
-
Transient torque reversals in indirect drive wind turblnes
- 2023
-
Ingår i: Wind Energy. - 1099-1824 .- 1095-4244. ; 26, s. 691-716
-
Tidskriftsartikel (refereegranskat)abstract
- The adverse effect of transient torque reversals (TTRs) оп wind turЬine gearboxes сап Ье severe due to their magnitude and rapid occurrence compared with other equipment. The primary damage is caused to the bearings as the bearing loaded zone rapidly changes its direction. Other components are also affected Ьу TTRs (such as gear tooth); however, its impact оп bearings is the largest. While the occurrence and severity of TTRs are acknowledged in the industry, there is а lack of academic literature оп their initiation, propagation and the associated risk of damage. Furthermore, in the wide range of operation modes of а wind turЬine, it is not known which modes сап lead to TTRs. Further, the interdependence of TTRs оп environmental loading like the wind is also not reported. This paper aims to address these unknowns Ьу expanding оп the understanding of TTRs using а high-fidelity numerical model of an indirect drive wind turЬine with а douЬly fed induction generator (DFIG). То this end, а multibody model of the drivetrain is developed in SIMPACK. The model of the drivetrain is explicitly coupled to state-of-the-art wind turЬine simulator OpenFAST and а grid-connected DFIG developed in MATLAB®'s Simulink® allowing а coupled analysis of the electromechanical system. А metric termed slip risk duration is proposed in this paper to quantify the risk associated with the TTRs. The paper first investigates а wide range of IEC design load cases to uncover which load cases сап lead to TTRs. lt was found that emergency stops and symmetric grid voltage drops сап lead to TTRs. Next, the dependence of the TTRs оп inflow wind parameters is investigated using а sensitivity analysis. lt was found that the instantaneous wind speed at the onset of the grid fault or emergency shutdown was the most influential factor in the slip risk duration. The investigation enaЫes the designer to predict the occurrence of TTRs and quantify the associated risk of damage. The paper concludes with recommendations for utility-scale wind turЬines and directions for future research.
|
|
| 20. |
- Bergman, Martin, 1985
(författare)
-
Affective Surface Engineering for Product Design
- 2016
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Design research, sensation and perception, hard metrology, emotional functions, semantics, surface roughness, product interaction, core values, total appearance… the list of scientific phrases never ends. Yet, what do they mean and how shall we use it when we are communicating with the industry and our end users? Is it possible to link the product experience to process parameters, put a number onto it? When you can measure spoken needs or even better, implied needs, of a product, and relate that data to the production, it is possible do create advanced products with high interaction stimuli. By joining engineering sciences (hard metrology) with design science (soft metrology) correlations between customer’s product experience (emotional functions) and surface properties (technical functions) can be established.The research briefly handles an optimization process where the framework from Kansei Engineering (KE) is used to evaluate the semantics issues primarily regarding materials and functional surfaces of products. The basic idea is that; the stakeholder’s experience shall be observed already at the phase of ideation in the product development process, which then facilitates the project (in regard to the total appearance) later on when a concept reaches the production stage. The results presented in this thesis are carried out through a number of case studies together with the industry. The main result and aim of the research is a developed robust approach that links emotional functions with technical functions, which in the next step facilitates the improvement of the total appearance of a product. Nevertheless, it should be recognized that research is not yet complete. It is an iterative process, which confirms that the loop of the method needs to be complete. The developed method is a toolbox with the fundamental tools and workshops to facilitate the correlation process mentioned above, however the packaging of the final step in the method is not yet complete. The future research outlook will focus on the “independent industry implementation” where the method is used by the industry by guidelines only, thus without researchers support.
|
|
| 21. |
- Stylidis, Kostas, 1978, et al.
(författare)
-
Perceived Quality Evaluation with the Use of Extended Reality
- 2019
-
Ingår i: Proceedings of the International Conference on Engineering Design, ICED. - : Cambridge University Press (CUP). - 2220-4334 .- 2220-4342. ; 1:1, s. 1993-2002
-
Konferensbidrag (refereegranskat)abstract
- If designers want to communicate quality aspects of the product, there is a need to bring these characteristics into the measurable space of perceived quality (PQ) attributes. To illustrate the solution for designers' dilemma of the “best design choice” in this study we applied the PQ attributes importance ranking (PQAIR) method, with the example of a bread toaster. We choose for evaluation three PQ attributes which can significantly influence visual quality of a product: Gap, Flush and Parallelism. We performed the experiment measuring subjective preferences over the toaster designs of two respondent's groups - “Designers” and “Customers.” We used sequentially: (i) web-survey (still images); (ii) desktop system; and (iii) fully immersive head-mounted display system (Virtual Reality). Consequently, we conducted a post-experiment survey regarding subjective preferences, related to the PQ communication channels that have been implemented during the study. Our results indicate advantages and drawbacks for each PQ communication method that we applied in this experiment and encourage further research in the area of products' perceived quality assessment.
|
|
| 22. |
-
Systems Perspectives on Biorefineries 2013
- 2013
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- Replacing fossil fuels with biomass for the production of energy carriers, materialsand specialty chemicals is a challenge that now confronts humanity. In whichapplications shall we use limited resources of biomass? How can biomass berefined into the products we want? What are the consequences of demanding toomuch? What is an optimal design of a biorefinery? Where should they be located?What policy instruments are required to realise the biorefineries of the future?There is not one final answer to these questions. However, different systems studiescan provide us with complementary pieces of the puzzle. These can be valuableby themselves, or be brought together into a larger and more complex picture.Systems Perspectives on Biorefineries 2013 is an updated edition of SystemsPerspectives on Biorefineries 2012 and contains twelve chapters that address differenttopics related to the immensely important issue of how the world’s biomassresources can, or should, be converted into the goods we need and desire. Thebook is still far from complete, but it is a contribution and a start...
|
|
| 23. |
- Ribeiro, Luis, et al.
(författare)
-
Industrial Agents for the Fast Deployment of Evolvable Assembly Systems
- 2015. - 1st ed.
-
Ingår i: Industrial Agents. - Amsterdam, Netherlands : Elsevier. - 9780128003411 ; , s. 301-321, s. 301-322
-
Bokkapitel (refereegranskat)abstract
- The current manufacturing scenario is characterized by high market unpredictability. Agility is therefore a central challenge for modern companies that need to understand and be proactive towards their product offer in respect to “what is offered, when it is offered, where, how and by whom” (Brown & Bessant 2003).The “what” and the “when” are particularly relevant to the research in emerging paradigms as they account for variety, customization and volume; and timing, speed and seasonality (Brown & Bessant 2003).In this scenario, several design approaches and models have been proposed in the last decade to enable re-configurability and subsequently enhance the companies’ ability to adjust their offer in nature and time.From a paradigmatic point of view research has concentrated on the organizational structure of the shop-floor and the associated controls aspects. Concepts like Reconfigurable Manufacturing Systems (RMS) (Koren & Shpitalni 2010) and Fractal Factories (FF) (Montreuil 1999) support the physical construction of production systems by regulating their layout and making a few assumptions on their logical organization. On the other hand, concepts like Bionic Manufacturing Systems (BMS)(Ueda 1992), Holonic Manufacturing Systems (HMS)(Van Brussel et al. 1998), Evolvable Assembly Systems (Ribeiro et al. 2010) essentially provide the theoretical guidelines for the logical/computational organization of the system (see (Tharumarajah 1996) for a comparison between BMS, HMS and FF and (Setchi & Lagos 2004) for the rationale supporting the shift from Dedicated Lines to Flexible Manufacturing System and finally RMS).While these paradigms provide the conceptual framework and the main design guidelines their actual interpretation and implementation has led to a wider set of architectures (Monostori, Váncza & Kumara 2006; Leitão 2009; Parunak 2000; Pěchouček & Mařík 2008).These architectures align the high-level principles with the technological offer and limitations while seeking to address the re-configurability requirements of (Mehrabi, Ulsoy & Koren 2000; Rösiö & Säfsten 2013):module mobility – modules are easy and quick to move and install;“diagnosability” – it is quick to identify the sources of quality and reliability problems;“integrability” – modules are easy to integrate into the rest of the system.“convertibility” – it is easy and quick to switch between existing products and it is easy to adapt the system to future products;scalability – it is easy to enlarge and downsize the production system;“automatibility” – a dynamic level of automation is enabled;modularity – all system elements are designed to be modular;customization – the capability and flexibility of the production system is designed according to the products to be produced in the system.Instant deployment, as addressed in the present chapter directly addresses mobility, “integrability”, “convertibility”, scalability and customization. Mechatronic modularity is a prerequisite and is enforced by the proposed architecture and the considered modular design. “Diagnosability” was not specifically tackled.In this context, the chapter analyses the agent-based architecture related with the Instantly Deployable Evolvable Assembly System (IDEAS) project that is inspired by the Evolvable Assembly System (EAS) paradigm (Ribeiro et al. 2010) as a mechanism to enable fast deployment of mechatronic modules. EAS advocates the use of process-oriented modules and envisions the production system as a collection of processes and the associated interacting agents.The architecture and the related test cases are used to draw the main lessons learned in respect to technological and conceptual implications.In this context, the remainder of this text is organized as follows: section 1.1 discusses the main deployment challenges, section 1.2 details the reference architecture and associated concepts, section 1.3 presents the principal implementation decisions, section 1.4 features the main lessons learned, sections 1.5 discusses the benefits of the proposed approach and finally section 1.6 reflects on the main conclusions.
|
|
| 24. |
- Kurdve, Martin, et al.
(författare)
-
Can Social Sustainability Values be Incorporated in a Product Service System for Temporary Public Building Modules?
- 2017
-
Ingår i: Procedia CIRP. - : Elsevier. - 2212-8271 .- 2212-8271. ; 64, s. 193-198
-
Tidskriftsartikel (refereegranskat)abstract
- The temporary constructions industry has cost efficiency and sustainability challenges that may require new innovative business models as well as product and processes. This paperaims to discuss how social sustainability services can be included in product service system (PSS)by investigating a case where employment is offered in distributed temporary building module manufacturing in the PSS context. The case has been evaluated against PSS literature. Recent reviews and literature on inclusion of social sustainability and PSS for buildings were used. It is concluded that the current concept fits basic definitions of PSS although it is not typical. The social value of employment is difficult to evaluate and inclusion in PSS needs further research. Design practice could be used to further develop the services in the studied concept. © 2017 The Authors.
|
|
| 25. |
- Sandberg, Marcus, et al.
(författare)
-
A modelling methodology for assessing use of datacenter waste heat in greenhouses
- 2017
-
Konferensbidrag (refereegranskat)abstract
- In Sweden, the number of datacenters establishments are steadily increasing thanks to green, stable and affordable electricity, free air cooling, advantageous energy taxes and well-developed Internet fiber infrastructures. Even though datacenters use a lot of energy, the waste heat that they create is seldom reused. A possible cause is that this waste heat is often low grade and airborne: it is therefore hard to directly inject it into a district heating system without upgrades, which require additional energy and equipment that generate extra costs. One option for reusing this heat without needs for upgrades is to employ it for heating up greenhouses. But assessing the feasibility of this approach by building physical prototypes can be costly, therefore using computer models to simulate real world conditions is an opportunity. However, there is a lack of computer modelling methodologies that can assess the possibility of using waste heat from datacenters in greenhouses in cold climates.The objective of this paper is therefore to propose such a methodology and discuss its benefits and drawbacks in comparison with other research studies. This methodology combines computational fluid dynamics, process modelling and control engineering principles into a computer model that constitutes a decision support system to study different waste heat and greenhouse or mushroom house scenarios.The paper validates the strategy through a case study in northern Sweden, where we assess the amount of produced waste heat by collecting temperature, relative humidity, and fan speed data for the air discharged from the datacenter.The resulting methodology, composed by conducting measurements and computer models, calculations can then be used for other datacenter operators or greenhouse developers to judge whether it is possible or not to build greenhouses using datacenter waste heat.
|
|
| 26. |
- Kleyko, Denis, et al.
(författare)
-
Vehicle Classification using Road Side Sensors and Feature-free Data Smashing Approach
- 2016
-
Ingår i: 2016 IEEE 19th International Conference on Intelligent Transportation Systems (ITSC). - Piscataway : IEEE. - 9781509018895 - 9781509018888 - 9781509018901 ; , s. 1988-1993
-
Konferensbidrag (refereegranskat)abstract
- The main contribution of this paper is a study of the applicability of data smashing - a recently proposed data mining method - for vehicle classification according to the "Nordic system for intelligent classification of vehicles" standard, using measurements of road surface vibrations and magnetic field disturbances caused by passing vehicles. The main advantage of the studied classification approach is that it, in contrast to the most of traditional machine learning algorithms, does not require the extraction of features from raw signals. The proposed classification approach was evaluated on a large dataset consisting of signals from 3074 vehicles. Hence, a good estimate of the actual classification rate was obtained. The performance was compared to the previously reported results on the same problem for logistic regression. Our results show the potential trade-off between classification accuracy and classification method's development efforts could be achieved.
|
|
| 27. |
- Johansson, Björn, 1975, et al.
(författare)
-
Power Level Sampling of Metal Cutting Machines for Data Representation in Discrete Event Simulation
- 2015
-
Ingår i: International Journal of Production Research. - : Informa UK Limited. - 0020-7543 .- 1366-588X. ; 53:23, s. 7060-7070
-
Tidskriftsartikel (refereegranskat)abstract
- An extension to the application area for discrete event simulation (DES) has been ongoing since the last decade and focused only on economic aspects to include ecologic sustainability. With this new focus, additional input parameters, such as electrical power consumption of machines, are needed. This paper aim at investigating how NC machine power consumption should be represented in simulation models of factories. The study includes data-sets from three different factories. One factory producing truck engine blocks, one producing brake disc parts for cars and one producing forklift components. The total number of data points analysed are more than 2,45,000, where of over 1,11,000 on busy state for 11 NC machines. The low variability between busy cycles indicates that statistical representations are not adding significant variability. Furthermore, results show that non-value-added activities cause a substantial amount of the total energy consumption, which can be reduced by optimising the production flow using dynamic simulations such as DES.
|
|
| 28. |
- Lejon, Marcus, 1986, et al.
(författare)
-
Multidisciplinary Design of a Three Stage High Speed Booster
- 2017
-
Ingår i: ASME Turbo Expo 2017: Turbine Technical Conference and Exposition. - : ASME Press. ; 2B-2017
-
Konferensbidrag (refereegranskat)abstract
- The paper describes a multidisciplinary conceptual design of an axial compressor, targeting a three stage, high speed, high efficiency booster with a design pressure ratio of 2.8. The paper is outlined in a step wise manner starting from basic aircraft and engine thrust requirements, establishing the definition of the high speed booster interface points and its location in the engine. Thereafter, the aerodynamic 1D/2D design is carried out using the commercial throughflow tool SC90C. A number of design aspects are described, and the steps necessary to arrive at the final design are outlined. The SC90C based design is then carried over to a CFD based conceptual design tool AxCent, in which a first profiling is carried out based on a multiple circular arc blade definition. The design obtained at this point is referred to as the VINK compressor. The first stage of the compressor is then optimized using an in-house optimization tool, where the objective functions are evaluated from detailed CFD calculations. The design is improved in terms of efficiency and in terms of meeting the design criteria put on the stage in the earlier design phases. Finally, some aeromechanical design aspects of the first stage are considered. The geometry and inlet boundary conditions of the compressor are shared with the turbomachinery community on a public server. This is intended to be used as a test case for further optimization and analysis.
|
|
| 29. |
- Li, Xiaojian, 1991, et al.
(författare)
-
Installation effects on engine design
- 2020
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Increasing the engine bypass ratio is one way to improve propulsive efficiency. However, an increase in the bypass ratio (BPR) has usually been associated with an increase in the fan diameter. Consequently, there can be a notable increase in the impact of the engine installation on the overall aircraft performance. In order to achieve a better balance between those factors, it requires novel nacelle and engine design concepts. This report mainly reviews installation effects on engine design. Firstly, the installation effects assessment methods are introduced. Then, the installation effects on engine cycle design, intake design and exhaust design are sequentially reviewed.
|
|
| 30. |
- Ström, Henrik, 1981, et al.
(författare)
-
Behaviour and stability of the two-fluid model for fine-scale simulations of bubbly flow in nuclear reactors
- 2015
-
Ingår i: International Journal of Chemical Reactor Engineering. - : Walter de Gruyter GmbH. - 1542-6580 .- 2194-5748. ; 13:4, s. 449-459
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, we formulate a simplistic two-fluid model for bubbly steam-water flow existing between fuel pins in nuclear fuel assemblies. Numerical simulations are performed in periodic 2D domains of varying sizes. The appearance of a non-uniform volume fraction field in the form of meso-scales is investigated and shown to be varying with the bubble loading and the domain size, as well as with the numerical algorithm employed. These findings highlight the difficulties involved in interpreting the occurrence of instabilities in two-fluid simulations of gas-liquid flows, where physical and unphysical instabilities are prone to be confounded. The results obtained in this work therefore contribute to a rigorous foundation in on-going efforts to derive a consistent meso-scale formulation of the traditional two-fluid model for multiphase flows in nuclear reactors.
|
|
| 31. |
- Berbyuk, Viktor, 1953
(författare)
-
Structural Dynamics Control, Third Edition
- 2020
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- Structural dynamics and especially one of its main problems, vibrations and vibration control, appear in vehicle engineering, high precision machines and mechanisms, robotics, civil engineering, wind turbines, biomechanics, and others. Over the last decades there has been much work concerned with the vibration control of different dynamical systems. The texbook “Structural Dynamics Control” aims at providing knowledge on modern methods and concepts of passive, semi-active and active vibration control, to cross the bridge between structural dynamics and control engineering, while providing an overview of the potential of smart materials, (magnetorheological fluids, magnetostrictive materials, and others), for sensing and actuating purposes in active vibration control. One of the aims of this textbook is to provide students and engineers with opportunity of becoming familiar with the standard methods of the classical calculus of variations, the linear quadratic regulator optimization methods, and modern optimal control theory with focus on their applications in structural dynamics for vibration attenuation and vibration suppression problems. The textbook consists of four main parts: Vibration dynamics, Passive and semi-active vibration control, Active and hybrid vibration control, and Applications. The textbook ends with the supplementary mathematics, list of Matlab codes and answers and hints for the exercises. The list of references consists of only those books and scientific papers which were used during preparation of the textbook or which have been recommended to stundents for additional information on a studied topic. The textbook is aimed at first towards graduate and postgraduate students following Master and PhD programmes related to structural dynamics, mechatronics, control engineering, automotive engineering, noise and vibrations. The only prerequisite for reading this book is basic knowledge in mechanics and some familiarity with vibrations, state space models and automatic control.
|
|
| 32. |
|
|
| 33. |
|
|
| 34. |
-
Method and models used in the project Pathways to Sustainable European Energy Systems
- 2011
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- This book describes the research that has been carried out during the first period (2006-2010) of the Alliance for Global Sustainability (AGS) project "Pathways to Sustainable European Energy Systems". this interdisciplinary project involves more that 40 researchers and addresses various aspects of the challenges faced in transforming the European energy system. Presented in this book are the energy-related methods and models that originate from different scientific disciplines and traditions and that were applied in the Pathways project. Some of the analytical tools are well-known, well-documented, and widely used in academic research. Others have been developed (or refined) during the Pathways project and are therefore unique. The chapters of this book cover around 30 different methods and models used in the Pathways project and presents an overview of the processes through which the research was conducted and the methods and models were co-ordinated.
|
|
| 35. |
- Midya, Surajit, et al.
(författare)
-
DC Component From Pantograph Arcing in AC Traction System : Influencing Parameters, Impact, and Mitigation Techniques
- 2011
-
Ingår i: IEEE transactions on electromagnetic compatibility (Print). - : IEEE conference proceedings. - 0018-9375 .- 1558-187X. ; 53:1, s. 18-27
-
Tidskriftsartikel (refereegranskat)abstract
- Pantograph arcing in ac traction system generates transients, and causes asymmetries and distortion in supply voltage and current waveforms. These asymmetric voltage and current lead to a net dc component and harmonics that propagate within the traction power and signalling system and cause electromagnetic interference. This problem is enhanced during winter because of the layer of ice/snow on the overhead contact wire. The sliding contact becomes poor and a visible arc moves along with the pantograph. In this paper, it is shown how different parameters like traction current, line speed, power factor, and supply voltage influence the arcing, its characteristics, and the dc components. It is shown that the dc current component increases with increasing train speed and traction current, and reduces at a lower power factor. It is also discussed how the presence of an ice layer influences the arcing and the dc components. It is found that running the trains below the normal operating power factors is an effective choice to mitigate this problem. The findings presented in this paper could be beneficial to estimate the probable limit of the dc component at the planning stage so that proper precautions can be taken at the design stage itself.
|
|
| 36. |
- Vilardell, A. M., et al.
(författare)
-
B2-structured Fe3Al alloy manufactured by laser powder bed fusion : Processing, microstructure and mechanical performance
- 2023
-
Ingår i: Intermetallics (Barking). - : Elsevier. - 0966-9795 .- 1879-0216. ; 156
-
Tidskriftsartikel (refereegranskat)abstract
- Prealloyed Fe3Al was successfully manufactured by laser powder bed fusion. The best set of process parameters led to parts with a relative density of 99.5 %, a surface roughness, Sa, of 31.5 ± 5.6 μm and a hardness of 319 ± 14 HV0.1. Its microstructure as well as its mechanical properties at room and high temperatures were analyzed. The results of the chemical composition showed minor variations in aluminum content oscillating between 21 and 28 at.% along the melt pool. Additionally, elongated grains were observed to grow parallel to the building direction, as well as the development of a weak 001 texture along the building direction. The mechanical properties were influenced by the temperature. Compression tests showed a loss in strength with the increase in temperature, from a yield strength of 621 ± 40 MPa at room temperature to 89 ± 20 MPa at 650 °C. Reciprocating sliding wear tests showed that fragmentation of the intermetallic at room temperature occurs, whereas plastic deformation dominated at higher temperatures. For all temperatures, tribochemical wear was also present due to the oxidation of wear debris.
|
|
| 37. |
- Atashipour, Seyed Rasoul, et al.
(författare)
-
On the Shear Buckling of Clamped Narrow Rectangular Orthotropic Plates
- 2015
-
Ingår i: Mathematical problems in engineering (Print). - : Hindawi Limited. - 1024-123X .- 1563-5147. ; 2015
-
Tidskriftsartikel (refereegranskat)abstract
- This paper deals with stability analysis of clamped rectangular orthotropic thin plates subjected to uniformly distributed shear load around the edges. Due to the nature of this problem, it is impossible to present mathematically exact analytical solution for the governing differential equations. Consequently, all existing studies in the literature have been performed by means of different numerical approaches. Here, a closed-form approach is presented for simple and fast prediction of the critical buckling load of clamped narrow rectangular orthotropic thin plates. Next, a practical modification factor is proposed to extend the validity of the obtained results for a wide range of plate aspect ratios. To demonstrate the efficiency and reliability of the proposed closed-form formulas, an accurate computational code is developed based on the classical plate theory (CPT) by means of differential quadrature method (DQM) for comparison purposes. Moreover, several finite element (FE) simulations are performed via ANSYS software. It is shown that simplicity, high accuracy, and rapid prediction of the critical load for different values of the plate aspect ratio and for a wide range of effective geometric and mechanical parameters are the main advantages of the proposed closed-form formulas over other existing studies in the literature for the same problem.
|
|
| 38. |
- Högman, Ulf, 1961, et al.
(författare)
-
Requirements on New Technology and the Technology Implementation Process
- 2010
-
Ingår i: 8th International NordDesign Conference, NordDesign 2010; Goteborg; Sweden; 25 August 2010 through 27 August 2010. ; 2, s. 289-300
-
Konferensbidrag (refereegranskat)abstract
- In literature, many authors have pointed to the importance of technology and technology development for company competitiveness. In this study we aim to study the technology in more detail and attempt to develop an understanding on the requirements and needs on “technology” from the perspective of product development. The research question which we aim to answer in this study is:“What are the requirements on maturity of technology when this technology is about to enter into the product development process?“A qualitative research strategy, based on three study cases involving 17 interviewees, has been chosen. All three cases come from one single company, Volvo Aero Corporation (VAC) in Sweden, in the context of the aero engine industry. The study contributes with a broad mapping of requirements and how they relate to different categories of technologies, showing big differences both regarding content and timing. It is concluded that attention should be payed both to how the organization builds new capabilities and to the capabilities of the technology itself. A surprisingly complicated picture on the requirements relating to the implementation of new technologies has emerged in the study. This contributes to the understanding regarding the difficulties of developing new technology and integrating it into an application.
|
|
| 39. |
- Ågren, Magnus, 1984, et al.
(författare)
-
The manager perspective on requirements impact on automotive systems development speed
- 2018
-
Ingår i: Proceedings - 2018 IEEE 26th International Requirements Engineering Conference, RE 2018. - : IEEE. ; , s. 17-28
-
Konferensbidrag (refereegranskat)abstract
- Context: Historically, automotive manufacturers have adopted rigid requirements engineering processes, which allowed them to meet safety-critical requirements while integrating thousands of physical and software components into a highly complex and differentiated product. Nowadays, needs of improving development speed are pushing companies in this domain towards new ways of developing software. Objectives: We aim at obtaining a manager perspective on how the goal to increase development speed impacts how software intense automotive systems are developed and their requirements managed. Methods: We used a qualitative multiple-case study, based on 20 semi-structured interviews, at two automotive manufacturers. Our sampling strategy focuses on manager roles, complemented with technical specialists. Results: We found that both a requirements style dominated by safety concerns, and decomposition of requirements over many levels of abstraction impact development speed negatively. Furthermore, the use of requirements as part of legal contracts with suppliers hiders fast collaboration. Suggestions for potential improvements include domain-specific tooling, model-based requirements, test automation, and a combination of lightweight pre-development requirements engineering with precise specifications post-development. Conclusions: We offer an empirical account of expectations and needs for new requirements engineering approaches in the automotive domain, necessary to coordinate hundreds of collaborating organizations developing software-intensive and potentially safety-critical systems.
|
|
| 40. |
- Landström, Anna, 1990, et al.
(författare)
-
A life cycle approach to business performance measurement systems
- 2018
-
Ingår i: Procedia Manufacturing. - : Elsevier BV. - 2351-9789. ; 25, s. 126-133, s. 126-133
-
Konferensbidrag (refereegranskat)abstract
- Virtually every company has implemented a Business Performance Measurement System (BPMS) with the purpose of monitoring production and business performance and to execute the corporate strategy at all levels in a company. The purpose of this article is to shed light on common pitfalls related to the practical use of BPMS and further to present a life cycle model with the purpose of introducing structured approach to avoiding the pitfalls. The article contributes to further development of the BPMS life cycle concept and practical examples of how it can be used.
|
|
| 41. |
- De Vin, Leo, 1957-
(författare)
-
Credibility of Simulation Results – a Philosophical Perspective on Virtual Manufacturing
- 2012
-
Ingår i: Proceedings of the 13th Mechatronics Forum International Conference. - Linz : TRAUNER Verlag. - 9783990330463 ; , s. 784-791
-
Konferensbidrag (refereegranskat)abstract
- This paper describes the factors that play a role in credibility of simulation results. It focuses on virtual manufacturing and in particular resource simulation as an example. However, a simulation model can be used in a number of different ways. Verification and validation of models is amongst other factors important for credibility. In this area, much work has been carried out in defense research. There are also some striking similarities between virtual manufacturing and information fusion, in particular in the field of human competence development related to credibility of simulations.
|
|
| 42. |
- Evertsson, Magnus, 1967, et al.
(författare)
-
Control systems for improvement of cone crusher yield and operation
- 2014
-
Ingår i: Proceedings of Comminution '14.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Gyratory and cone crushers are regaining interest and are becoming more frequently used in order to create more energy efficient comminution circuits. A typical example is found in coarse comminution circuits were HPGRs are used as a first milling stage. In this case the preparation of a suitable feed with a well-defined width of the particle size distribution and a controlled top size are of high importance. In turn, this emphasizes the importance of a stable and controlled operation of the preceding crushing stages. Control systems for cone and gyratory crushers were first introduced during the early 60ths. The common opinion is that if these systems are able to compensate for the wear of the crushing liners the production yield can be increased with 20-25%. Over the years these types of systems have been widely used but the theory behind the principles have not been thoroughly scientifically scrutinized and presented. Of special interest is the capability to protect the crushers from long term overloading commonly defined as fatigue.With developments in electronics and plant control the crusher control systems have become more refined over the years. Though, there are sometimes conflicting interests in the control strategies between process requirements and crusher protection. In the paper an overview of the challenges, opportunities and existing control systems for cone and gyratory crushers is presented. A requirement specification for a system that is possible to fully integrate into modern plant control systems is outlined.
|
|
| 43. |
- Tofique, Muhammad Waqas, 1986-, et al.
(författare)
-
Development of the distributed dislocation dipole technique for the analysis of closure of complex fractures involving kinks and branches
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- This paper presents the development of the distributed dislocation dipole technique (DDDT) for the analysis of crack surface closure of crack cases involving kinks and branches. Crack cases in which closure occurs are analyzed by reformulating the Bueckner's principle taking the contact stresses at the contacting portions of the crack surfaces into account. Stress intensity factors corresponding to opening and sliding mode of deformation at the crack tips are computed. Three test cases involving kinked and/or branched cracks with at least one of the crack segments undergoing crack surface closure when subjected to remote tensile loading are analyzed. The results obtained from the DDDT are compared to those obtained from the Finite Element Method (FEM) analysis of the same crack cases. This comparison shows that the computation of stress intensity factors for the crack cases involving crack surface closure are less acurate compared to fully open crack cases. However, the stress intensity factors are still computed to an accuracy of within 2 percent if the Jacobi polynomial expansions of at least the sixth order are used to represent the crack surface opening and sliding displacements. Higher order Jacobi polynomials lead to increased accuracy.
|
|
| 44. |
- Ottonello Briano, Floria
(författare)
-
Mid-infrared photonic devices for on-chip optical gas sensing
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Gas detection is crucial in a wide range of fields and applications, such as safety and process control in the industry, atmospheric sciences, and breath diagnostics. Optical gas sensing offers some key advantages, compared to other sensing methods such as electrochemical and semiconductor sensing: high specificity, fast response, and minimal drift.Wavelengths between 3 and 10 μm are of particular interest for gas sensing. This spectral range, called the mid-infrared (mid-IR), is also known as the fingerprint region, because several gas species can be identified by their sharp absorption lines in this region. The most relevant mid-IR-active gases are the trace gases carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), ammonia (NH3), and nitrous oxide (N2O). They are greenhouse gases, contributing to global warming. They are waste products of human activities and widely used in agriculture and industry. Therefore, it is crucial to accurately and extensively monitor them. However, traditional optical gas sensors with a free-space optical path configuration, are too bulky, power-hungry, and expensive to be widely adopted.This thesis presents mid-IR integrated photonic devices that enable the on-chip integration of optical gas sensors, with a focus on CO2 sensing. The reported technologies address the fundamental sensor functionalities: light-gas interaction, infrared light generation, and infrared light detection. The thesis introduces a novel mid-IR silicon photonic waveguide that allows a light path as long as tens of centimeters to fit in a volume smaller than a few cubic millimeters. Mid-IR CO2 spectroscopy demonstrates the high sensing performance of the waveguide. The thesis also explores the refractive index sensing of CO2 with a mid-IR silicon photonic micro-ring resonator.Furthermore, the thesis proposes platinum nanowires as low-cost infrared light sources and detectors that can be easily integrated on photonic waveguides. Finally, the thesis presents a large-area infrared emitter fabricated by highs-peed wire bonding and integrated in a non-dispersive infrared sensor for the detection of alcohol in breath.The technologies presented in this thesis are suited for cost-effective mass production and large-scale adoption. Miniaturized integrated optical gas sensors have the potential to become the main choice for an increasingly broad range of existing and new applications, such as portable, distributed, and networked environmental monitoring, and high-volume medical and consumer applications.
|
|
| 45. |
|
|
| 46. |
- Blomé, Mikael, et al.
(författare)
-
Course Supervision Challenges in PhD Education
- 2012
-
Ingår i: 7:e Pedagogiska Inspirationskonferensen 2012. - 2003-3761 .- 2003-377X. ; 7
-
Konferensbidrag (refereegranskat)abstract
- A large portion of the PhD education in Sweden is dedicated to courses. This made it interesting to explore potential course supervision challenges in the PhD programme. A multiple-case study was conducted to identify such challenges and explore how these are perceived by students and supervisors at the Faculty of Engineering of Lund University. By interviewing students and supervisors in five different research groups, insights were gained into how the main stakeholders reason about courses. The findings indicate that courses that are to be included in the education are characterized by a large degree of freedom tailored to individual student needs and preferences. However, the type, timing, availability, value, and convalidation of courses are challenges that limit this freedom.
|
|
| 47. |
- Törlind, Peter, et al.
(författare)
-
Towards true collaboration in global design teams?
- 2005
-
Ingår i: Proceedings ICED 05, the 15th International Conference on Engineering Design. - Barton : Institution of Engineers, Australia. - 0858257882
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Today’s collaboration tools can support formal meetings to a certain extent, though there is still an immense potential for improvement when it comes to designing virtual and physical places where global design teams can collaborate in more ‘natural’ ways than existing distributed environments allow. One challenge for global product development is to support true collaboration within global design teams, where diversity and competences of the whole team can be utilized and where team members can think together rather then merely exchange information, opinions and divide work. This paper summarizes the results of several case studies and development projects performed within the Polhem Laboratory over the last four years and proposes challenges for future research. From our findings some of the most important challenges are how to support users with communication tools for more natural formal and informal communication (i.e. as a co-located team communicates), while automatically storing information and context from the distributed meetings.
|
|
| 48. |
- Etikyala, Sreelekha, 1991
(författare)
-
Particulate Formation in GDI Engines
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The need to comply with stringent emission regulations while improving fuel economy and reducing criteria pollutant emissions from transportation presents a major challenge in the design of gasoline Direct Injection (DI) engines because of the adverse effects of ultrafine Particulate Number (PN) emissions on human health and other environmental concerns. With upcoming advances in vehicle electrification, it may be the case that electric vehicles completely replace all current vehicles powered by internal combustion engines ensuring zero emissions. In the meantime, Gasoline Direct Injection (GDI) engines have become the primary mode of transportation using gasoline as they offer better fuel economy while also providing low CO2 emissions. However, GDI engines tend to produce relatively high PN emissions when compared to conventional Port Fuel Injection (PFI) engines, largely because of challenges associated with in-cylinder liquid fuel injection. Cold-starts, transients, and high load operation generate a disproportionate share of PN emissions from GDI engines over a certification cycle. The mechanisms of PN formation during these stages must therefore be understood to identify solutions that reduce overall PN emissions in order to comply with increasingly strict emissions standards. This work presents experimental studies on particulate emissions from a naturally aspirated single cylinder metal gasoline engine run in a homogeneous configuration. The engine was adapted to enable operation in both DI and PFI modes. In PFI mode, injection was performed through a custom inlet manifold about 50 cm from the cylinder head to maximize the homogeneity of the fuel-air mixture. The metal head was eventually modified by incorporating an endoscope that made it possible to visualize the combustion process inside the cylinder. The experimental campaigns were structured to systematically isolate and clarify PN formation mechanisms. Tests were initially performed in steady state mode to obtain preliminary insights and to screen operating conditions before conducting transient tests. Particulate emissions were measured and correlated with the images obtained through endoscope visualization where possible. Key objectives of these studies were to find ways of reducing PN formation by increasing combustion stability. It was found that by avoiding conditions that cause wall wetting with liquid fuel, PN emissions can be substantially reduced during both steady state operation and transients. Warming the coolant and injecting fuel at later timings reduced PN emissions during warmup and cold transient conditions. Additionally, experiments using fuel blends with different oxygenate contents showed that the chemical composition of the fuel strongly influences particulate formation under steady state and transient conditions, and that this effect is load-dependent. Overall, the results obtained in this work indicate that wall wetting is the dominant cause of particulate formation inside the cylinder and that fuel-wall interactions involving the piston, cylinder walls, and valves during fuel injection account for a significant proportion of PN emissions in the engine raw exhaust.
|
|
| 49. |
- Grolig, Jan Gustav, 1986
(författare)
-
Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications.An important element of an SOFC stack is the interconnect component, which connectstwo adjacent fuel cell elements. Interconnects, which are commonly composedof ferritic stainless steels, have to be corrosion-resistant, mechanically stable and costoptimized.This work aimed to investigate economic solutions for interconnect materials and tounderstand the underlying mechanisms of degradation and electrical conduction ofthese materials. Mainly two substrates, a commercially available steel (AISI 441) anda ferritic stainless steel that was optimized for an SOFC application (Sandvik SanergyHT) were combined with different barrier coatings and exposed to a cathode-sideatmosphere. A method was developed that allows for the electrical characterizationof promising material systems and model alloys, thereby facilitating a fundamentalunderstanding of the dominant electrical conduction processes linked to the oxidescales that grow on interconnects. The AISI 441 steel coated with reactive elementsand cobalt showed good corrosion and chromium evaporation profiles, while AISI 441coated with cerium and cobalt also had promising electrical properties. The SanergyHT steel was examined with coatings of copper and iron and copper and manganese,respectively. The corrosion and chromium evaporation profiles of Sanergy HT wereimproved by coating with copper and iron. The copper and iron-coated Sanergy HTshowed lower area specific resistance values than cobalt-coated Sanergy HT. Chromia,which is the main constituent of oxide scales, was synthesized using differentmethods. The electrical properties of chromia were found to be sensitive to not onlyimpurities, but also heat treatment. Finally the electrical properties of cobalt- andcobalt cerium-coated Sanergy HT steels were investigated. It was revealed that theaddition of cerium improved the conductivity of the interconnect by both slowingdown chromia growth and preventing the outward diffusion of iron into the spinel.
|
|
| 50. |
- Salunkhe, Omkar, 1990, et al.
(författare)
-
Review of Current Status and Future Directions for Collaborative and Semi-Automated Automotive Wire Harnesses Assembly
- 2023
-
Ingår i: Procedia CIRP. - : Elsevier. - 2212-8271 .- 2212-8271. ; 120, s. 696-701
-
Tidskriftsartikel (refereegranskat)abstract
- Wire harnesses are vital for any modern automotive vehicle. They control the basic functions in a vehicle, for example, windshield wipers and critical functions such as sensors, cameras, and autopilot functions. Thus, the quality of wire harness assembly is highly important. Today, wire harnesses are usually assembled manually, which creates unergonomic and tedious working conditions for operators. Traditional and collaborative industrial robots have been identified as possible solutions to overcome challenges faced by operators in this type of assembly. The international research community has proposed many solutions for automating the assembly of wire harnesses in automotive vehicles but despite these solutions, the industry has not been able to adopt a method to automate this assembly process fully or partially. This paper presents a review of findings on robot-assisted wire harness assembly processes based on a systematic literature review. Specifically, the assembly of wire harnesses in Electric Vehicles (EVs). The state-of-the-art review focuses on solutions to improve unergonomic work situations and ensure the quality of assembly operations. Best practices and reasons for the lack of extensive implementation in automotive final assembly systems are described. Further, the paper presents suggestions based on success stories where the automation of the wire harness assembly in automotive vehicles has been realised by leveraging human-centred automation solutions. Based on the findings, this paper identifies the research for future study. The findings also indicate that there is already technology that can support the automation of wire harness assembly processes in EVs but it is crucial to identify the human aspects and the role of humans in the assembly of wire harness assembly process.
|
|
