| 1. |
- Palmquist, Anders, 1977, et al.
(författare)
-
Complex geometry and integrated macro-porosity: Clinical applications of electron beam melting to fabricate bespoke bone-anchored implants
- 2023
-
Ingår i: Acta Biomaterialia. - : Elsevier BV. - 1742-7061 .- 1878-7568. ; 156, s. 125-145
-
Forskningsöversikt (refereegranskat)abstract
- The last decade has witnessed rapid advancements in manufacturing technologies for biomedical implants. Additive manufacturing (or 3D printing) has broken down major barriers in the way of producing complex 3D geometries. Electron beam melting (EBM) is one such 3D printing process applicable to metals and alloys. EBM offers build rates up to two orders of magnitude greater than comparable laser-based technologies and a high vacuum environment to prevent accumulation of trace elements. These features make EBM particularly advantageous for materials susceptible to spontaneous oxidation and nitrogen pick-up when exposed to air (e.g., titanium and titanium-based alloys). For skeletal reconstruction(s), anatomical mimickry and integrated macro-porous architecture to facilitate bone ingrowth are undoubtedly the key features of EBM manufactured implants. Using finite element modelling of physiological loading conditions, the design of a prosthesis may be further personalised. This review looks at the many unique clinical applications of EBM in skeletal repair and the ground-breaking innovations in prosthetic rehabilitation. From a simple acetabular cup to the fifth toe, from the hand-wrist complex to the shoulder, and from vertebral replacement to cranio-maxillofacial reconstruction, EBM has experienced it all. While sternocostal reconstructions might be rare, the repair of long bones using EBM manufactured implants is becoming exceedingly frequent. Despite the various merits, several challenges remain yet untackled. Nevertheless, with the capability to produce osseointegrating implants of any conceivable shape/size, and permissive of bone ingrowth and functional loading, EBM can pave the way for numerous fascinating and novel applications in skeletal repair, regeneration, and rehabilitation. Statement of significance: Electron beam melting (EBM) offers unparalleled possibilities in producing contaminant-free, complex and intricate geometries from alloys of biomedical interest, including Ti6Al4V and CoCr. We review the diverse range of clinical applications of EBM in skeletal repair, both as mass produced off-the-shelf implants and personalised, patient-specific prostheses. From replacing large volumes of disease-affected bone to complex, multi-material reconstructions, almost every part of the human skeleton has been replaced with an EBM manufactured analog to achieve macroscopic anatomical-mimickry. However, various questions regarding long-term performance of patient-specific implants remain unaddressed. Directions for further development include designing personalised implants and prostheses based on simulated loading conditions and accounting for trabecular bone microstructure with respect to physiological factors such as patient's age and disease status.
|
|
| 2. |
- Jing, Yujia, 1985
(författare)
-
Hyperthermia-responsive liposomal systems
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Abstract Sophisticated liposomal systems are emerging at an increasing rate to meet the demands for multifunctional drug carriers in chemotherapies in combined with hyperthermia. For example, liposomal drug carriers for temperature-controlled drug release under hyperthermic conditions have recently been tested in clinical trials. More advanced designs of liposomes are expected to release encapsulated contents and activate hidden surface-functions in response to heat stimulus. Towards this aim, the present thesis is focused on formulating asymmetric lipid systems that can preserve functional moieties, and reactivate the targeted function as well as release the encapsulated compounds upon local heating. The design of the asymmetric liposomal systems utilizes the heat-activated transmembrane lipid diffusion during gel to liquid-crystalline phase transitions of the lipid membranes.Rational design of advanced liposomal drug-delivery systems will require understanding of the physicochemical properties of lipid membranes under, e.g., hyperthermic conditions. Here, supported lipid membranes on planar solid surfaces were used for model studies of lipid composition yielding a gel to liquid crystalline phase-transition temperature in the range 40 – 45 °C. It was found that the liposome-to-membrane formation process is not only size-dependent but also governed by temperature. Two methods of preparing supported asymmetric lipid membranes were investigated. As a proof-of-concept, the upper leaflets were either replaced or chemically transformed by enzymatic hydrolysis. The processes were monitored using surface sensitive techniques such as quartz crystal microbalance with dissipation (QCM-D) and dual polarization interferometry (DPI). The asymmetric structures were stable at a room temperature, while lipid flip-flop was induced upon increasing of the temperature. Transmembrane lipid exchange in the asymmetric structure under hyperthermic conditions was demonstrated by detecting, through streptavidin binding, biotinylated lipids appearing at the top leaflet which were first located in the lower leaflet. The protocols developed for the supported lipid systems were adapted for the preparation of asymmetric liposomes. Biotinylated asymmetric liposomes were used as a model system to demonstrate the principle of heat-activated targeting of asymmetric liposomes to streptavidin-coated surfaces. More biologically relevant interaction was utilized to replace the biotin-streptavidin function, where asymmetric cationic liposomes were binding to anionic supported membrane immobilized surfaces upon heating. The described strategies for assembly of asymmetric supported membranes provide a guide to the development of multifunctional drug carriers. The protocols used in experiments with supported membranes were readily adapted to the preparation of asymmetric liposomes. The ongoing study tests the asymmetric liposomes in vitro, which is designed to demonstrate hyperthermia treatment can enhance accumulation of liposomes in FaDu cells, and at the same time activate release of the encapsulated components. The results of in vitro tests can be used to analyze the feasibility of utilizing the asymmetric liposomes as a platform in vivo to explore further improvement in their functions upon microwave hyperthermia.
|
|
| 3. |
- Cardemil, Carina, et al.
(författare)
-
Strontium-doped calcium phosphate and hydroxyapatite granules promote different inflammatory and bone remodelling responses in normal and ovariectomised rats.
- 2013
-
Ingår i: PLosOne. - : Public Library of Science (PLoS). - 1932-6203. ; 8:12
-
Tidskriftsartikel (refereegranskat)abstract
- The healing of bone defects may be hindered by systemic conditions such as osteoporosis. Calcium phosphates, with or without ion substitutions, may provide advantages for bone augmentation. However, the mechanism of bone formation with these materials is unclear. The aim of this study was to evaluate the healing process in bone defects implanted with hydroxyapatite (HA) or strontium-doped calcium phosphate (SCP) granules, in non-ovariectomised (non-OVX) and ovariectomised (OVX) rats. After 0 (baseline), six and 28d, bone samples were harvested for gene expression analysis, histology and histomorphometry. Tumour necrosis factor-α (TNF-α), at six days, was higher in the HA, in non-OVX and OVX, whereas interleukin-6 (IL-6), at six and 28d, was higher in SCP, but only in non-OVX. Both materials produced a similar expression of the receptor activator of nuclear factor kappa-B ligand (RANKL). Higher expression of osteoclastic markers, calcitonin receptor (CR) and cathepsin K (CatK), were detected in the HA group, irrespective of non-OVX or OVX. The overall bone formation was comparable between HA and SCP, but with topological differences. The bone area was higher in the defect centre of the HA group, mainly in the OVX, and in the defect periphery of the SCP group, in both non-OVX and OVX. It is concluded that HA and SCP granules result in comparable bone formation in trabecular bone defects. As judged by gene expression and histological analyses, the two materials induced different inflammatory and bone remodelling responses. The modulatory effects are associated with differences in the spatial distribution of the newly formed bone.
|
|
| 4. |
- Aulin, Cecilia, 1979-
(författare)
-
Extracellular Matrix Based Materials for Tissue Engineering
- 2010
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The extracellular matrix is (ECM) is a network of large, structural proteins and polysaccharides, important for cellular behavior, tissue development and maintenance. Present thesis describes work exploring ECM as scaffolds for tissue engineering by manipulating cells cultured in vitro or by influencing ECM expression in vivo. By culturing cells on polymer meshes under dynamic culture conditions, deposition of a complex ECM could be achieved, but with low yields. Since the major part of synthesized ECM diffused into the medium the rate limiting step of deposition was investigated. This quantitative analysis showed that the real rate limiting factor is the low proportion of new proteins which are deposited as functional ECM. It is suggested that cells are pre-embedded in for example collagen gels to increase the steric retention and hence functional deposition. The possibility to induce endogenous ECM formation and tissue regeneration by implantation of growth factors in a carrier material was investigated. Bone morphogenetic protein-2 (BMP-2) is a growth factor known to be involved in growth and differentiation of bone and cartilage tissue. The BMP-2 processing and secretion was examined in two cell systems representing endochondral (chondrocytes) and intramembranous (mesenchymal stem cells) bone formation. It was discovered that chondrocytes are more efficient in producing BMP-2 compared to MSC. The role of the antagonist noggin was also investigated and was found to affect the stability of BMP-2 and modulate its effect. Finally, an injectable gel of the ECM component hyaluronan has been evaluated as delivery vehicle in cartilage regeneration. The hyaluronan hydrogel system showed promising results as a versatile biomaterial for cartilage regeneration, could easily be placed intraarticulary and can be used for both cell based and cell free therapies.
|
|
| 5. |
- Orru, Anna Maria, 1976, et al.
(författare)
-
AHA! festival 2015
- 2015
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The AHA festival investigates the borders between art and science in a three-day event at the Chalmers University of Technology hosted by the Department of Architecture. An international festival intended to provide enlightening experiences, staging surprises, new thoughts and displaced perspectives that lead to alternative modes of thinking about the space between art and science. We invite scientists (physicists, historians, mathematicians, medical students), artists (dancers, musicians, painters, poets, chefs) and not least architects, who reside in these borderlands and wish to share their vision and work. The key intention is to celebrate both art and science as key knowledge building devices.
|
|
| 6. |
- Berglund, Fanny, et al.
(författare)
-
Evidence for wastewaters as environments where mobile antibiotic resistance genes emerge
- 2023
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- The emergence and spread of mobile antibiotic resistance genes (ARGs) in pathogens have become a serious threat to global health. Still little is known about where ARGs gain mobility in the first place. Here, we aimed to collect evidence indicating where suchinitial mobilizationevents of clinically relevant ARGs may have occurred. We found that the majority of previously identified origin species did not carry the mobilizing elements that likely enabled intracellular mobility of the ARGs, suggesting a necessary interplay between different bacteria. Analyses of a broad range of metagenomes revealed that wastewaters and wastewater-impacted environments had by far the highest abundance of both origin species and corresponding mobilizing elements. Most origin species were only occasionally detected in other environments. Co-occurrence of origin species and corresponding mobilizing elements were rare in human microbiota. Our results identify wastewaters and wastewater-impacted environments as plausible arenas for the initial mobilization of resistance genes.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Calon, Tim, et al.
(författare)
-
Multimodal analysis of the tissue response to a bone-anchored hearing implant. : 11.Calon TGA, Johansson ML, Omar O, Shah FA, Budding D, Trobos M, Thomsen P, Stokroos RJ, Palmquist
- 2019
-
Ingår i: 2nd Politzer Society Meeting/2nd World Congress of Otology, 28 May - 1 June, 2019, Warsaw, Poland..
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 11. |
|
|
| 12. |
- Söderlund, Zackarias
(författare)
-
Engineering the extracellular matrix to model diseases and orchestrate regeneration
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The extracellular matrix is not only a scaffold to which cells attach, but it is also a matrix that communicates cell signals. Because of the interplay between cells and the extracellular matrix, changes in the extracellular matrix can steer cell fate. This opens up the opportunity to design and engineer the extracellular matrix to communicate changes to the cells. Thus, this thesis has focused on understanding which parameters and signals influence cells, but also on how to utilise this knowledge to engineer a completely defined extracellular matrix. The extracellular matrix can be modulated in several ways, such as cell attachment, degradation properties, porosity, stiffness as well as being easily functionalised with molecules of interest using click chemistry.Two of the papers in this thesis focus on the development of new tools for glycosaminoglycan research to get a better understanding of how this can be modulated to steer cell signalling. Glycosaminoglycans bind growth factors, which can then either act as a co-receptor to increase the potency of the growth factor or to protect the growth factors from being broken down or inactivated. The tools that we have developed open the possibility to better study the production of glycosaminoglycans from different types of cells and better understand what changes occur in glycosaminoglycan synthesis during disease.The second two papers in this thesis focus on understanding the extracellular matrix. Article number one focuses on the effect of different extracellular matrices and stretch on cells and their secretome. Article number two, which has been the focus of this thesis, utilises the new findings in the other articles about glycosaminoglycans and the extracellular matrix to create a synthetic and defined extracellular matrix. This extracellular matrix is modified with glycosaminoglycans to have a slow release of growth factors to instruct cells to differentiate both in vitro and in vivo.
|
|
| 13. |
- Hansson, Magnus L., et al.
(författare)
-
Artificial spider silk supports and guides neurite extension in vitro
- 2021
-
Ingår i: The FASEB Journal. - : John Wiley & Sons. - 0892-6638 .- 1530-6860. ; 35:11
-
Tidskriftsartikel (refereegranskat)abstract
- Surgical intervention with the use of autografts is considered the gold standard to treat peripheral nerve injuries. However, a biomaterial that supports and guides nerve growth would be an attractive alternative to overcome problems with limited availability, morbidity at the site of harvest, and nerve mismatches related to autografts. Native spider silk is a promising material for construction of nerve guidance conduit (NGC), as it enables regeneration of cm-long nerve injuries in sheep, but regulatory requirements for medical devices demand synthetic materials. Here, we use a recombinant spider silk protein (NT2RepCT) and a functionalized variant carrying a peptide derived from vitronectin (VN-NT2RepCT) as substrates for nerve growth support and neurite extension, using a dorsal root ganglion cell line, ND7/23. Two-dimensional coatings were benchmarked against poly-d-lysine and recombinant laminins. Both spider silk coatings performed as the control substrates with regards to proliferation, survival, and neurite growth. Furthermore, NT2RepCT and VN-NT2RepCT spun into continuous fibers in a biomimetic spinning set-up support cell survival, neurite growth, and guidance to an even larger extent than native spider silk. Thus, artificial spider silk is a promising biomaterial for development of NGCs.
|
|
| 14. |
- Shah, Furqan A., et al.
(författare)
-
Bioactive glass and glass-ceramic scaffolds for bone tissue engineering
- 2018
-
Ingår i: Bioactive Glasses (Second Edition). - 9780081009369 ; , s. 201-33
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Bioactive glasses and glass-ceramics are a diverse group of materials possessing a unique set of physicochemical properties that make them useful for bone repair. Scaffolds for bone tissue engineering are subject to many requirements including biocompatibility, osteogenesis, biodegradability, and mechanical competence, all of which must be considered in the design features. This chapter addresses various scaffold fabrication techniques for melt-derived and sol-gel-derived compositions, polymer-based organic-inorganic composites, calcium phosphate-based inorganic-inorganic composites, bioactive bone cements, scaffolds based on glass compositions containing specific therapeutic ions, and hybrid materials where the organic and inorganic phases interact at the molecular level. The most important achievements, challenges and potential solutions, as well as the most promising areas of future research involving bioactive glasses and glass-ceramics for bone tissue engineering are presented.
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Halling Linder, Cecilia, 1975-
(författare)
-
Biochemical and functional properties of mammalian bone alkaline phosphatase isoforms during osteogenesis
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The human skeleton is a living and dynamic tissue that constantly is being renewed in a process called bone remodeling. Old bone is resorbed by osteoclasts and new bone is formed by osteoblasts. Bone is a composite material made up by mineral crystals in the form of hydroxyapatite (calcium and phosphate) that provides the hardness of bone, and collagen fibrils that provides elasticity and flexibility. Alkaline phosphatase (ALP) is a family of enzymes that is present in most species and catalyzes the hydrolysis of various phosphomonoesters at alkaline pH. Despite the generalized use of ALP as a biochemical marker of bone formation, the precise function of bone ALP (BALP) is only now becoming clear. Three circulating human BALP isoforms (B1, B2, and B/I) can be distinguished in healthy individuals and a fourth isoform (B1x) has been discovered in patients with chronic kidney disease and in bone tissue.Paper I. Three endogenous phosphocompounds, (i.e., inorganic pyrophosphate (PPi), pyridoxal 5′-phosphate (PLP) and phosphoethanolamine (PEA)), have been suggested to serve as physiological substrates for BALP. The BALP isoforms display different catalytic properties towards PPi and PLP, which is attributed to their distinct N-linked glycosylation patterns. The catalytic activity, using PEA as substrate, was barely detectable for all BALP isoforms indicating that PEA is not a physiological substrate for BALP.Paper II. Mouse serum ALP is frequently measured and interpreted in mammalian bone research. However, little is known about the circulating ALPs in mice and their relation to human ALP. We characterized the circulating and tissue-derived mouse ALP isozymes and isoforms from mixed strains of wild-type and knockout mice. All four BALP isoforms (B/I, B1x, B1, and B2) were identified in mouse serum and bone tissues, in good correspondence with those found in human bones. All mouse tissues, except liver, contained significant ALP activities. This is a notable difference as human liver contains vast amounts of ALP.Paper III. The objective of this study was to investigate the binding properties of human collagen type I to human BALP, including the two BALP isoforms B1 and B2, together with ALP from human liver, human placenta and E. coli. A surface plasmon resonance-based analysis showed that BALP binds stronger to collagen type I in comparison with ALPs expressed in non-mineralizing tissues. The B2 isoform binds significantly stronger to collagen type I in comparison with the B1 isoform, indicating that glycosylation differences in human ALPs are of crucial importance for protein–protein interactions with collagen type I.Paper IV. Tartrate-resistant acid phosphatase (TRAP) is highly expressed in osteoclasts and frequently used as a marker of bone resorption. Intriguingly, recent studies show that TRAP is also expressed in osteoblasts and osteocytes. TRAP displays enzymatic activity towards the endogenous substrates for BALP, i.e., PPi and PLP. Both TRAP and BALP can alleviate the inhibitory effect of osteopontin on mineralization by dephosphorylation, which suggests a novel role for TRAP in skeletal mineralization.
|
|
| 18. |
- Pulkkinen, Hertta, et al.
(författare)
-
Recombinant human type II collagen as a material for cartilage tissue engineering.
- 2008
-
Ingår i: International Journal of Artificial Organs. - : Wichtig Editore Srl. - 0391-3988 .- 1724-6040. ; 31:11, s. 960-969
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: Collagen type II is the major component of cartilage and would be an optimal scaffold material for reconstruction of injured cartilage tissue. In this study, the feasibility of recombinant human type II collagen gel as a 3-dimensional culture system for bovine chondrocytes was evaluated in vitro.METHODS: Bovine chondrocytes (4x106 cells) were seeded within collagen gels and cultivated for up to 4 weeks. The gels were investigated with confocal microscopy, histology, and biochemical assays.RESULTS: Confocal microscopy revealed that the cells maintained their viability during the entire cultivation period. The chondrocytes were evenly distributed inside the gels, and the number of cells and the amount of the extracellular matrix increased during cultivation. The chondrocytes maintained their round phenotype during the 4-week cultivation period. The glycosaminoglycan levels of the tissue increased during the experiment. The relative levels of aggrecan and type II collagen mRNA measured with realtime polymerase chain reaction (PCR) showed an increase at 1 week.CONCLUSION: Our results imply that recombinant human type II collagen is a promising biomaterial for cartilage tissue engineering, allowing homogeneous distribution in the gel and biosynthesis of extracellular matrix components.
|
|
| 19. |
- Sul, Young-Taeg, 1960, et al.
(författare)
-
A novel in vivo method for quantifying the interfacial biochemical bond strength of bone implants
- 2010
-
Ingår i: Journal of the Royal Society Interface. - London, United Kingdom : Royal Society. - 1742-5689 .- 1742-5662. ; 7:42, s. 81-90
-
Tidskriftsartikel (refereegranskat)abstract
- Quantifying the in vivo interfacial biochemical bond strength of bone implants is a biological challenge. We have developed a new and novel in vivo method to identify an interfacial biochemical bond in bone implants and to measure its bonding strength. This method, named biochemical bond measurement (BBM), involves a combination of the implant devices to measure true interfacial bond strength and surface property controls, and thus enables the contributions of mechanical interlocking and biochemical bonding to be distinguished from the measured strength values. We applied the BBM method to a rabbit model, and observed great differences in bone integration between the oxygen (control group) and magnesium (test group) plasma immersion ion-implanted titanium implants (0.046 versus 0.086 MPa, n=10, p=0.005). The biochemical bond in the test implants resulted in superior interfacial behaviour of the implants to bone: (i) close contact to approximately 2 μm thin amorphous interfacial tissue, (ii) pronounced mineralization of the interfacial tissue, (iii) rapid bone healing in contact, and (iv) strong integration to bone. The BBM method can be applied to in vivo experimental models not only to validate the presence of a biochemical bond at the bone–implant interface but also to measure the relative quantity of biochemical bond strength. The present study may provide new avenues for better understanding the role of a biochemical bond involved in the integration of bone implants.
|
|
| 20. |
- Iseri, Emre
(författare)
-
Microfluidic Compartmentalization for Smart Materials, Medical Diagnostics and Cell Therapy
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The organisation of fluids in small compartments is ubiquitous in nature, such as in the cellular composition of all life. This work explores several engineering avenues where microscale fluid compartmentalization can bring novel material properties or novel functionality in life sciences or medicine. Here, we introduce four unique compartmentalization methods: 1) 3D fluid self-organisation in microscaffolds (FLUID3EAMS), 2) 2D microcapillary arrays on a dipstick (Digital Dipstick), 3) a sliding microfluidic platform with cross-flow (Slip-X-Chip), and 4) compartmentalization by cutting of soft solid matter (Solidify & Cut). These methods were used in a wide range of applications. Within the area of smart materials, we applied FLUID3EAMS to synthesize materials with temperature-tuneable permeability and surface energy and to establish, in a well-controlled fashion, tissue-like materials in the form of 3D droplet interface bilayer networks. Solidify & Cut was used to form soft composites with a new type of magnetic behaviour, rotation-induced ferromagnetism, that allows easy reprogramming of the magnetization of magnetopolymers. Within the area of medical diagnostics, we applied Digital Dipstick to perform rapid digital bacterial culture in a dipstick format and obtained clinically relevant diagnostic results on samples from patients with a urinary tract infection. Furthermore, Slip-X-Chip enables particle concentration and washing as new functions in sliding microfluidic platforms, which significantly expands their potential application area. Finally, within the area of cell therapy, we explored the microencapsulation of high concentrations of therapeutic cells and presented a novel technique to fabricate core-shell microcapsules by exploiting the superior material properties of spider silk membranes.
|
|
| 21. |
- Andersson, Marlene, et al.
(författare)
-
Biomimetic spinning of artificial spider silk from a chimeric minispidroin
- 2017
-
Ingår i: Nature Chemical Biology. - : Springer Science and Business Media LLC. - 1552-4450 .- 1552-4469. ; 254
-
Tidskriftsartikel (refereegranskat)abstract
- Herein we present a chimeric recombinant spider silk protein (spidroin) whose aqueous solubility equals that of native spider silk dope and a spinning device that is based solely on aqueous buffers, shear forces and lowered pH. The process recapitulates the complex molecular mechanisms that dictate native spider silk spinning and is highly efficient; spidroin from one liter of bacterial shake-flask culture is enough to spin a kilometer of the hitherto toughest as-spun artificial spider silk fiber.
|
|
| 22. |
- Apelgren, Peter, et al.
(författare)
-
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo.
- 2017
-
Ingår i: PloS one. - : Public Library of Science (PLoS). - 1932-6203. ; 12:12
-
Tidskriftsartikel (refereegranskat)abstract
- Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.
|
|
| 23. |
- Dietrich, Franciele, et al.
(författare)
-
Effect of storage and preconditioning of healing rat Achilles tendon on structural and mechanical properties
- 2021
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Tendon tissue storage and preconditioning are often used in biomechanical experiments and whether this generates alterations in tissue properties is essential to know. The effect of storage and preconditioning on dense connective tissues, like tendons, is fairly understood. However, healing tendons are unlike and contain a loose connective tissue. Therefore, we investigated if storage of healing tendons in the fridge or freezer changed the mechanical properties compared to fresh tendons, using a pull-to-failure or a creep test. Tissue morphology and cell viability were also evaluated. Additionally, two preconditioning levels were tested. Rats underwent Achilles tendon transection and were euthanized 12 days postoperatively. Statistical analyzes were done with one-way ANOVA or Student’s t-test. Tissue force and stress were unaltered by storage and preconditioning compared to fresh samples, while high preconditioning increased the stiffness and modulus (p ≤ 0.007). Furthermore, both storage conditions did not modify the viscoelastic properties of the healing tendon, but altered transverse area, gap length, and water content. Cell viability was reduced after freezing. In conclusion, preconditioning on healing tissues can introduce mechanical data bias when having extensive tissue strength diversity. Storage can be used before biomechanical testing if structural properties are measured on the day of testing.
|
|
| 24. |
- Barreto Henriksson, Helena, et al.
(författare)
-
Determination of mechanical and rheological properties of a cell-loaded peptide gel during ECM production
- 2019
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 563, s. 437-444
-
Tidskriftsartikel (refereegranskat)abstract
- The development of an injectable biomaterial that supports cell survival and maintains or promotes nucleus pulposus (NP) phenotype could aid delivery of cells to degenerated NPs causing low back pain. Mesenchymal cells were loaded and grown in a synthetic peptide gel, PuraMatrix (R). Cells were observed within the gels over 0-28 days, and accumulation of glycosaminoglycans were detected by histological staining. The mechanical properties of the cell-loaded constructs, and the change of the mechanical properties were studied using stress relaxation of the gels under compression and confinement. The PuraMatrix (R) gel was shown to relax fast on compression indicating that the fluid could easily flow out of the gel, and thus indicating the presence of large pores/voids. The presence of these pores/voids was further supported by high mobility of dextran molecules, determined using fluorescence recovery after photo bleaching. The stress required to deform the cell-loaded constructs to a specific strain increases at day 21, at which point the presence of glycosaminoglycans within the cell-loaded constructs was also observed. The results provide evidence of changes in mechanical properties of the PuraMatrix (R) matrix upon excretion of the extracellular matrix by the cells.
|
|
| 25. |
- Baş, Yağmur, et al.
(författare)
-
Preparation and Characterization of Softwood and Hardwood Nanofibril Hydrogels: Toward Wound Dressing Applications
- 2023
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 24:12, s. 5605-5619
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogels of cellulose nanofibrils (CNFs) are promising wound dressing candidates due to their biocompatibility, high water absorption, and transparency. Herein, two different commercially available wood species, softwood and hardwood, were subjected to TEMPO-mediated oxidation to proceed with delignification and oxidation in a one-pot process, and thereafter, nanofibrils were isolated using a high-pressure microfluidizer. Furthermore, transparent nanofibril hydrogel networks were prepared by vacuum filtration. Nanofibril properties and network performance correlated with oxidation were investigated and compared with commercially available TEMPO-oxidized pulp nanofibrils and their networks. Softwood nanofibril hydrogel networks exhibited the best mechanical properties, and in vitro toxicological risk assessment showed no detrimental effect for any of the studied hydrogels on human fibroblast or keratinocyte cells. This study demonstrates a straightforward processing route for direct oxidation of different wood species to obtain nanofibril hydrogels for potential use as wound dressings, with softwood having the most potential.
|
|
| 26. |
- Fursatz, Marian, et al.
(författare)
-
Functionalization of bacterial cellulose wound dressings with the antimicrobial peptide ε-poly-L-Lysine
- 2018
-
Ingår i: Biomedical Materials. - : Institute of Physics Publishing (IOPP). - 1748-6041 .- 1748-605X. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- Wound dressings based on bacterial cellulose (BC) can form a soft and conformable protective layer that can stimulate wound healing while preventing bacteria from entering the wound. Bacteria already present in the wound can, however, thrive in the moist environment created by the BC dressing which can aggravate the healing process. Possibilities to render the BC antimicrobial without affecting the beneficial structural and mechanical properties of the material would hence be highly attractive. Here we present methods for functionalization of BC with ε-Poly-L-Lysine (ε-PLL), a non-toxic biopolymer with broad-spectrum antimicrobial activity. Low molecular weight ε-PLL was cross-linked in pristine BC membranes and to carboxymethyl cellulose (CMC) functionalized BC using carbodiimide chemistry. The functionalization of BC with ε-PLL inhibited growth of S. epidermidis on the membranes but did not affect the cytocompatibility to cultured human fibroblasts as compared to native BC. The functionalization had no significant effects on the nanofibrous structure and mechanical properties of the BC. The possibility to functionalize BC with ε-PLL is a promising, green and versatile approach to improve the performance of BC in wound care and other biomedical applications.
|
|
| 27. |
|
|
| 28. |
- Nygren, Håkan, 1952, et al.
(författare)
-
Mineralization at Titanium Surfaces is a Two-Step Process.
- 2016
-
Ingår i: Journal of functional biomaterials. - : MDPI AG. - 2079-4983. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Mapping the initial reaction of implants with blood or cell culture medium is important for the understanding of the healing process in bone. In the present study, the formation of low crystalline carbonated hydroxyapatite (CHA) onto commercially pure titanium (Ti) implants from cell culture medium and blood, is described as an early event in bone healing at implants. The Ti-implants were incubated with cell culture medium (DMEM) or whole blood and the surface concentration of Ca, P and HA was analyzed by XPS, EDX and Tof-SIMS. After incubation with DMEM for 16 h and 72 h, EDX and XPS analysis showed stable levels of Ca and P on the Ti-surface. ESEM images showed an even distribution of Ca and P. Further analysis of the XPS results indicated that CHA was formed at the implants. Analysis with ToF-SIMS yielded high m.w. fragments of HA, such as Ca₂PO4 at m/z 174.9 and Ca₃PO₅ at m/z 230.8, as secondary ions at the Ti-surfaces. Analysis of implants incubated in blood for 16 h, with ToF-SIMS, showed initial formation of CHA yielding CaOH as secondary ion. The results indicate that early mineralization at Ti-surfaces is an important step in the healing of implants into bone.
|
|
| 29. |
|
|
| 30. |
- Oskarsdotter, Kristin, 1995, et al.
(författare)
-
Autologous endothelialisation by the stromal vascular fraction on laminin-bioconjugated nanocellulose-alginate scaffolds
- 2023
-
Ingår i: Biomedical Materials (Bristol). - 1748-605X .- 1748-6041. ; 18:4
-
Tidskriftsartikel (refereegranskat)abstract
- Establishing a vascular network in biofabricated tissue grafts is essential for ensuring graft survival. Such networks are dependent on the ability of the scaffold material to facilitate endothelial cell adhesion; however, the clinical translation potential of tissue-engineered scaffolds is hindered by the lack of available autologous sources of vascular cells. Here, we present a novel approach to achieving autologous endothelialisation in nanocellulose-based scaffolds by using adipose tissue-derived vascular cells on nanocellulose-based scaffolds. We used sodium periodate-mediated bioconjugation to covalently bind laminin to the scaffold surface and isolated the stromal vascular fraction and endothelial progenitor cells (EPCs; CD31+CD45−) from human lipoaspirate. Additionally, we assessed the adhesive capacity of scaffold bioconjugation in vitro using both adipose tissue-derived cell populations and human umbilical vein endothelial cells. The results showed that the bioconjugated scaffold exhibited remarkably higher cell viability and scaffold surface coverage by adhesion regardless of cell type, whereas control groups comprising cells on non-bioconjugated scaffolds exhibited minimal cell adhesion across all cell types. Furthermore, on culture day 3, EPCs seeded on laminin-bioconjugated scaffolds showed positive immunofluorescence staining for the endothelial markers CD31 and CD34, suggesting that the scaffolds promoted progenitor differentiation into mature endothelial cells. These findings present a possible strategy for generating autologous vasculature and thereby increase the clinical relevance of 3D-bioprinted nanocellulose-based constructs.
|
|
| 31. |
- Shchukarev, Andrey, et al.
(författare)
-
Surface characterization of insulin-coated Ti6Al4V medical implants conditioned in cell culture medium: An XPS study
- 2017
-
Ingår i: Journal of Electron Spectroscopy and Related Phenomena. - : Elsevier BV. - 0368-2048 .- 1873-2526. ; 216, s. 33-38
-
Tidskriftsartikel (refereegranskat)abstract
- © 2017 Elsevier B.V.Surface characterization of insulin-coated Ti6Al4V medical implants, after incubation in α-minimum essential medium (α-MEM), was done by X-ray photoelectron spectroscopy (XPS), in order to analyze the insulin behavior at the implant – α-MEM interface. In the absence of serum proteins in cell culture medium, the coated insulin layer remained intact, but experienced a time-dependent structural transformation exposing hydrophobic parts of the protein toward the solution. The presence of fetal bovine serum (FBS) in the medium resulted in partial substitution of insulin by serum proteins. In spite of some insulin release, the remaining coated layer demonstrated a direct surface effect by stabilizing the structure of protein competitors, and by supporting the accumulation of calcium and phosphate ions at the interface. A structurally stable protein layer with incorporated calcium and phosphate ions at the implant–tissue interface could be an important prerequisite for enhanced bone formation.
|
|
| 32. |
- Sukhovey, Yurij G., et al.
(författare)
-
Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference
- 2019
-
Ingår i: Biomedical Dermatology. - : Springer Nature. - 2398-8460. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Present research addresses the issue of skin aging and corresponding skin treatment individualization. Particular research question was on the developing of simplified criterion supporting patient-specific decision on the necessity and intensity of skin treatment. Basing on the published results and a wide pool of experimental data, we have formulated a hypothesis that a difference between biologic and chronologic age can be used as an express criterion of skin aging.Methods: In present paper, we report the results of studies with 80 volunteers between 15 and 65 years of age, linking parameters reflecting immune state, skin state, and topography to the difference between biologic and chronologic age. Facial skin topography, skin moisture, sebum level, and skin elasticity were studied using commercial devices. Blood immunology studies were performed using venous blood samples. Correlations between all measured parameters and age difference were calculated. Also, cross correlations between skin cell profile and blood immune profile parameters, and skin roughness parameters were calculated.Results: Age dependencies of the blood immunological parameters on the biologic and chronologic age difference are less pronounced as compared to the changes in skin cell profile parameters. However, the changes in the tendencies when biologic age becomes equal to chronologic one are visible for all studied parameters.All measured skin roughness parameters show correlations with age difference, but average skin roughness and depth of the deepest profile valley have the largest correlation coefficient values. Many of the measured skin cell profile and blood immunology parameters show strong correlations with average skin roughness and deepest profile valley, with some of the coefficients exceeding 0.5–0.6.Conclusions: Basing on own experiments and published research results, it is possible to suggest using the difference between calculated biologic age and chronologic age as an individualized criterion supporting decisions on skin treatment strategy. Further research involving larger numbers of participants and aiming on optimizing the expressions for calculating biologic age could lead to reliable and easily available express criterion supporting the decision making for an individualized skin treatment.
|
|
| 33. |
- Asa'ad, Farah, 1983, et al.
(författare)
-
Expression of MicroRNAs in Periodontal and Peri-Implant Diseases: A Systematic Review and Meta-Analysis.
- 2020
-
Ingår i: International journal of molecular sciences. - : MDPI AG. - 1422-0067. ; 21:11
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of this review was to evaluate the expression patterns of miRNAs in periodontal and peri-implant diseases, while identifying potential miRNAs with the greatest diagnostic ability as an oral fluid biomarker.Human and animal studies were included when evaluating expression of miRNAs between health and different forms/stages of diseases, in which microarray and/or real-time polymerase chain reaction (RT-PCR) was carried out to detect fold changes in gene expression. After full-text analysis, 43 articles were considered for a qualitative assessment, and 16 miRNAs were selected to perform meta-analysis.Based on human studies, results showed an overall upregulation of most of the evaluated miRNAs in periodontitis, with miRNA-142-3p and miRNA-146a being the most conclusive on both microarray and RT-PCR values and potentially serving as diagnostic biomarkers for disease activity. Conversely, miR-155 was the only miRNA revealing a statistically significant difference (SSD) (p < 0.05*) in experimental periodontitis models from RT-PCR values. Scarce scientific evidence is available from peri-implant diseases, however, most explored miRNAs in peri-implantitis were downregulated except for miR-145.Although our results revealed that a distinct differential expression of specific miRNAs can be noted between the state of health and disease, future research remains necessary to explore the functional role of specific miRNAs and their potential as therapeutic targets in periodontal and peri-implant diseases. MeSH Terms: periodontitis, peri-implantitis, epigenomics, microarray analysis, real-time polymerase chain reaction, microRNAs.Scientific background: Although most research identified different expression levels of miRNAs in periodontal and peri-implant diseases compared to their counterparts, their actual role in the pathogenesis of these conditions remains unclear. Therefore, we aimed to present a systematic review and meta-analysis on the expression patterns of miRNAs in periodontitis and peri-implantitis, while identifying potential miRNAs with the greatest diagnostic ability as an oral fluid biomarker.In periodontitis-related studies, miRNA-142-3p and miRNA-146a were the most conclusive on both microarray and RT-PCR values. Scarce scientific evidence is available from peri-implant diseases.Both miRNA-142-3p and miRNA-146a might serve as future diagnostic biomarkers for disease activity in periodontitis. Yet, future research remains necessary to explore the functional role of specific miRNAs and their potential as therapeutic targets in periodontal and peri-implant diseases.
|
|
| 34. |
- Ichioka, Yuki, et al.
(författare)
-
Epigenetic changes of osteoblasts in response to titanium surface characteristics.
- 2021
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 109:2, s. 170-180
-
Tidskriftsartikel (refereegranskat)abstract
- We aimed to investigate the influence of titanium surface characteristics on epigenetic mechanisms and DNA damage/repair pathways. Osteoblast-like cells (MG63) were incubated on glass, smooth titanium, and minimally rough titanium discs, respectively, for 0, 1, 6, and 24hr. The presence of double-stranded DNA damage (γH2AX), DNA repair (Chk2), and epigenetic markers (AcH3 & DNMT1) were investigated using immunofluorescence. There were no Chk2-positive cells on the minimally rough titanium surfaces at all-time points, in comparison to glass and smooth titanium. Total γH2AX-positive cells on minimally rough titanium gradually decreased as incubation time increased, on the contrary to smooth titanium. Minimally rough titanium surfaces induced cytoplasmic staining of DNMT1 up to 99% at 24hr. For epigenetic markers related to the DNA damage/repair pathway, minimally rough titanium surfaces showed the lower percentage of AcH3-positive cells compared to glass and smooth titanium surface. The findings in the current study show that titanium surface characteristics indeed influence DNA damage and the DNA repair pathway, including epigenetic factors.
|
|
| 35. |
- Mladenović, Živko, et al.
(författare)
-
Soluble silica inhibits osteoclast formation and bone resorption in vitro
- 2014
-
Ingår i: Acta Biomaterialia. - : Elsevier. - 1742-7061 .- 1878-7568. ; 10:1, s. 406-418
-
Tidskriftsartikel (refereegranskat)abstract
- Several studies have suggested that silicon (Si) may be essential for normal development of connective tissue and the skeleton. Positive effects of Si from the diet as well as from Si-containing biomaterials, such as Bioactive glass 45S5 (BG), have been demonstrated. Studies have reported that Si stimulates osteoblast proliferation and differentiation. However, effects of Si on osteoclasts have not been directly addressed earlier. The purpose of the present in vitro study was to clarify if Si has regulatory effects on osteoclasts formation and bone resorption. Effects of BG, BG dissolution extracts and Si containing cell culture medium were investigated in a mouse calvarial bone resorption assay and osteoclast formation assays (mouse bone marrow cultures and RAW264.7 cell cultures). We conclude from our results that Si causes significant inhibition of osteoclast phenotypic gene expressions, osteoclast formation and bone resorption in vitro. In conclusion, the present study suggests that Si has a dual nature in bone metabolism with stimulatory effects on osteoblasts and inhibitory effects on osteoclasts. This suggested property of Si might be interesting to further explore in future biomaterials for treatments of bone defects in patients.
|
|
| 36. |
- Johansson, Martin L, et al.
(författare)
-
Non-invasive sampling procedure revealing the molecular events at different abutments of bone-anchored hearing systems–A prospective clinical pilot study
- 2022
-
Ingår i: Frontiers in Neuroscience. - : Frontiers Media SA. - 1662-4548 .- 1662-453X. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To investigate the molecular activities in different compartments around the bone-anchored hearing system (BAHS) with either electropolished or machined abutments and to correlate these activities with clinical and microbiological findings. Materials and methods: Twelve patients received machined or electropolished abutments after implant installation of BAHS. Peri-abutment fluid and tissue were collected from baseline to 12 months. Gene expression of cytokines and factors related to tissue healing and inflammation, regeneration and remodelling, as well as bacterial recognition were determined using quantitative-polymerase chain reaction (qPCR). The clinical status was evaluated using the Holgers scoring system, and bacterial colonisation was investigated by culturing. Results: The gene expression of inflammatory cytokines (IL-8, IL-1β, and IL-10) and bacteria-related Toll-like receptors (2 and 4) was higher in the peri-abutment fluid than at baseline and in the peri-abutment tissue at 3 and 12 months. Conversely, the expression of genes related to tissue regeneration (Coll1a1 and FOXO1) was higher in the tissue samples than in the peri-abutment fluid at 3 and 12 months. Electropolished abutments triggered higher expression of inflammatory cytokines (IL-8 and IL-1β) (in peri-abutment fluid) and regeneration factor FOXO1 (in peri-abutment tissue) than machined abutments. Several cytokine genes in the peri-abutment fluid correlated positively with the detection of aerobes, anaerobes and Staphylococcus species, as well as with high Holger scores. Conclusion: This study provides unprecedented molecular information on the biological processes of BAHS. Despite being apparently healed, the peri-abutment fluid harbours prolonged inflammatory activity in conjunction with the presence of different bacterial species. An electropolished abutment surface appears to be associated with stronger proinflammatory activity than that with a machined surface. The analysis of the peri-abutment fluid deserves further verification as a non-invasive sampling and diagnostic procedure of BAHS.
|
|
| 37. |
- Mellgren, Torbjörn, 1986-, et al.
(författare)
-
Guided bone tissue regeneration using a hollow calcium phosphate based implant in a critical size rabbit radius defect
- 2021
-
Ingår i: Biomedical Materials. - : Institute of Physics Publishing (IOPP). - 1748-6041 .- 1748-605X. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Long bone fractures are common and sometimes difficult to treat. Autologous bone (AB), bovine bone and calcium phosphates are used to stimulate bone growth with varying results. In the present study, a calcium phosphate cement (CPC) that previously showed promising grafting capabilities was evaluated for the first time in a long bone defect. A radius defect of 20 mm was created in 20 rabbits. The defect was filled by either a hollow CPC implant that had been manufactured as a replica of a rabbit radius through indirect 3D printing, or by particulate AB as control. Defect filling and bone formation was evaluated after 12 weeks by combining micro computed tomography (mu CT) and scoring of 3D images, together with histomorphometry and histology. The mu CT and histomorphometric evaluations showed a similar amount of filling of the defect (combining graft and bone) between the CPC and AB group, but the scoring of 3D images showed that the filling in the CPC group was significantly larger. Histologically the AB graft could not be distinguished from the new bone. The AB treated defects were found to be composed of more bone than the CPC group, including reorganised cancellous and cortical bone. Both the CPC and AB material was associated with new bone formation, also in the middle of the defect, which could result in closing of the otherwise critically sized gap. This study shows the potential for an indirectly 3D printed implant in guided bone regeneration in critically sized long bone defects.
|
|
| 38. |
- Pihl, Maria, 1978, et al.
(författare)
-
Osseointegration and antibacterial effect of an antimicrobial peptide releasing mesoporous titania implant
- 2021
-
Ingår i: Journal of Biomedical Materials Research - Part B Applied Biomaterials. - : Wiley. - 1552-4981 .- 1552-4973. ; 109:11, s. 1787-1795
-
Tidskriftsartikel (refereegranskat)abstract
- Medical devices such as orthopedic and dental implants may get infected by bacteria, which results in treatment using antibiotics. Since antibiotic resistance is increasing in society there is a need of finding alternative strategies for infection control. One potential strategy is the use of antimicrobial peptides, AMPs. In this study, we investigated the antibiofilm effect of the AMP, RRP9W4N, using a local drug-delivery system based on mesoporous titania covered titanium implants. Biofilm formation was studied in vitro using a safranine biofilm assay and LIVE/DEAD staining. Moreover, we investigated what effect the AMP had on osseointegration of commercially available titanium implants in vivo, using a rabbit tibia model. The results showed a sustained release of AMP with equal or even better antibiofilm properties than the traditionally used antibiotic Cloxacillin. In addition, no negative effects on osseointegration in vivo was observed. These combined results demonstrate the potential of using mesoporous titania as an AMP delivery system and the potential use of the AMP RRP9W4N for infection control of osseointegrating implants.
|
|
| 39. |
- Thesleff, Alexander, 1986, et al.
(författare)
-
The effect of cortical thickness and thread profile dimensions on stress and strain in bone-anchored implants for amputation prostheses
- 2022
-
Ingår i: Journal of the Mechanical Behavior of Biomedical Materials. - : Elsevier BV. - 1751-6161 .- 1878-0180. ; 129
-
Tidskriftsartikel (refereegranskat)abstract
- Skeletal attachment of limb prostheses ensures load transfer between the prosthetic leg and the skeleton. For individuals with lower limb amputation, these loads may be of substantial magnitude. To optimize the design of such systems, knowledge about the structural interplay between implant design features, dimensional changes, and material properties of the implant and the surrounding bone is needed. Here, we present the results from a parametric finite element investigation on a generic bone-anchored implant system of screw design, exposed to external loads corresponding to average and high ambulatory loading. Of the investigated parameters, cortical thickness had the largest effect on the stress and strain in the bone-anchored implant and in the cortical bone. 36%–44% reductions in maximum longitudinal stress in the bone-anchored implant was observed as a result of increased cortical thickness from 2 mm to 5 mm. A change in thread depth from 1.5 mm to 0.75 mm resulted in 20%–22% and 10%–18% reductions in maximum longitudinal stress in the bone-anchored implant at 2 mm and 5 mm cortical thickness respectively. The effect of changes in the thread root radius was less prominent, with 8% reduction in the maximum longitudinal stress in the bone-anchored implant being the largest observed effect, resulting from an increased thread root radius from 0.1 mm to 0.5 mm at a thread depth of 1.5 mm. Autologous transplantation of bone tissue distal to the fixture resulted in reductions in the longitudinal stress in the percutaneous abutment. The observed stress reduction of 10%–31% was dependent on the stiffness of the transplanted bone graft and the cortical thickness of surrounding bone. Results from this investigation may guide structural design optimization for bone-anchored implant systems for attachment of limb prostheses. © 2022 The Authors
|
|
| 40. |
- Lindahl, Carl, et al.
(författare)
-
Biomimetic calcium phosphate coating of additively manufactured porous CoCr implants
- 2015
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 353, s. 40-47
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this work was to study the feasibility to use a biomimetic method to prepare biomimetic hydroxyapatite (HA) coatings on CoCr substrates with short soaking times and to characterize the properties of such coatings. A second objective was to investigate if the coatings could be applied to porous CoCr implants manufactured by electron beam melting (EBM). The coating was prepared by immersing the pretreated CoCr substrates and EBM implants into the phosphate-buffered solution with Ca2+ in sealed plastic bottles, kept at 60 degrees C for 3 days. The formed coating was partially crystalline, slightly calcium deficient and composed of plate-like crystallites forming roundish flowers in the size range of 300-500 nm. Cross-section imaging showed a thickness of 300-500 nm. In addition, dissolution tests in Tris-HCl up to 28 days showed that a substantial amount of the coating had dissolved, however, undergoing only minor morphological changes. A uniform coating was formed within the porous network of the additive manufactured implants having similar thickness and morphology as for the flat samples. In conclusion, the present coating procedure allows coatings to be formed on CoCr and could be used for complex shaped, porous implants made by additive manufacturing.
|
|
| 41. |
- Albrektsson, Tomas, 1945, et al.
(författare)
-
An Imbalance of the Immune System Instead of a Disease Behind Marginal Bone Loss Around Oral Implants: Position Paper
- 2020
-
Ingår i: The International journal of oral & maxillofacial implants. - : Quintessence Publishing. - 1942-4434 .- 0882-2786. ; 35:3, s. 495-502
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: The purpose of this paper is to present evidence that supports the notion that the primary reason behind marginal bone loss and implant failure is immune-based and that bacterial actions in the great majority of problematic cases are of a secondary nature. MATERIALS AND METHODS: The paper is written as a narrative review. RESULTS: Evidence is presented that commercially pure titanium is not biologically inert, but instead activates the innate immune system of the body. For its function, the clinical implant is dependent on an immune/inflammatory defense against bacteria. Biologic models such as ligature studies have incorrectly assumed that the primary response causing marginal bone loss is due to bacterial action. In reality, bacterial actions are secondary to an imbalance of the innate immune system caused by the combination of titanium implants and ligatures, ie, nonself. This immunologic imbalance may lead to marginal bone resorption even in the absence of bacteria. CONCLUSION: Marginal bone loss and imminent oral implant failure cannot be properly analyzed without a clear understanding of immunologically caused tissue responses.
|
|
| 42. |
- Apelgren, Peter, et al.
(författare)
-
In Vivo Human Cartilage Formation in Three-Dimensional Bioprinted Constructs with a Novel Bacterial Nanocellulose Bioink
- 2019
-
Ingår i: Acs Biomaterials Science & Engineering. - : American Chemical Society (ACS). - 2373-9878. ; 5:5, s. 2482-2490
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial nanocellulose (BNC) is a 3D network of nanofibrils exhibiting excellent biocompatibility. Here, we present the aqueous counter collision (ACC) method of BNC disassembly to create bioink with suitable properties for cartilage-specific 3D-bioprinting. BNC was disentangled by ACC, and fibril characteristics were analyzed. Bioink printing fidelity and shear-thinning properties were evaluated. Cell-laden bioprinted grid constructs (5 X 5 X 1 mm(3)) containing human nasal chondrocytes (10 M mL(-1)) were implanted in nude mice and explanted after 30 and 60 days. Both ACC and hydrolysis resulted in significantly reduced fiber lengths, with ACC resulting in longer fibrils and fewer negative charges relative to hydrolysis. Moreover, ACC-BNC bioink showed outstanding printability, postprinting mechanical stability, and structural integrity. In vivo, cell-laden structures were rapidly integrated, maintained structural integrity, and showed chondrocyte proliferation, with 32.8 +/- 13.8 cells per mm(2) observed after 30 days and 85.6 +/- 30.0 cells per mm(2) at day 60 (p = 0.002). Furthermore, a full-thickness skin graft was attached and integrated completely on top of the 3D-bioprinted construct. The novel ACC disentanglement technique makes BNC biomaterial highly suitable for 3D-bioprinting and clinical translation, suggesting cell-laden 3D-bioprinted ACC-BNC as a promising solution for cartilage repair.
|
|
| 43. |
|
|
| 44. |
|
|
| 45. |
|
|
| 46. |
|
|
| 47. |
|
|
| 48. |
- Karlsson, Johan, 1984, et al.
(författare)
-
Stem cell homing using local delivery of plerixafor and stromal derived growth factor-1alpha for improved bone regeneration around Ti-implants
- 2016
-
Ingår i: Journal of Biomedical Materials Research - Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 104:10, s. 2466-2475
-
Tidskriftsartikel (refereegranskat)abstract
- Triggering of the early healing events, including the recruitment of progenitor cells, has been suggested to promote bone regeneration. In implantology, local drug release technologies could provide an attractive approach to promote tissue regeneration. In this study, we targeted the chemotactic SDF-1a/CXCR4 axis that is responsible e.g. for the homing of stem cells to trauma sites. This was achieved by local delivery of plerixafor, an antagonist to CXCR4, and/or SDF-1a from titanium implants coated with mesoporous titania thin films with a pore size of 7.5 nm. In vitro drug delivery experiments demonstrated that the mesoporous coating provided a high drug loading capacity and controlled release. The subsequent in vivo study in rat tibia showed beneficial effects with respect to bone-implant anchorage and bone-formation along the surface of the implants when plerixafor and SDF-1a were delivered locally. The effect was most prominent by the finding that the combination of the drugs significantly improved the mechanical bone anchorage. These observations suggest that titanium implants with local delivery of drugs for enhanced local recruitment of progenitor cells have the ability to promote osseointegration. This approach may provide a potential strategy for the development of novel implant treatments.
|
|
| 49. |
|
|
| 50. |
- Trbakovic, Amela, et al.
(författare)
-
A new synthetic granular calcium phosphate compound induces new bone in a sinus lift rabbit model
- 2018
-
Ingår i: Journal of Dentistry. - : Elsevier BV. - 0300-5712 .- 1879-176X. ; 70, s. 31-39
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives The aim of this study was to investigate if a synthetic granular calcium phosphate compound (CPC) and a composite bisphosphonate-linked hyaluronic acid–calcium phosphate hydrogel (HABP·CaP) induced similar or more amount of bone as bovine mineral in a modified sinus lift rabbit model. Material and methods Eighteen adult male New Zeeland White rabbits, received randomly one of the two test materials on a random side of the face, and bovine mineral as control on the contralateral side. In a sinus lift, the sinus mucosa was elevated and a titanium mini-implant was placed in the alveolar bone. Augmentation material (CPC, HABP·CaP or bovine bone) was applied in the space around the implant. The rabbits were euthanized three months after surgery and qualitative and histomorphometric evaluation were conducted. Histomorphometric evaluation included three different regions of interest (ROIs) and the bone to implant contact on each installed implant. Results Qualitative assessment (p=<.05), histomorphometric evaluations (p=<.01), and implant incorporation (p=<.05) showed that CPC and bovine mineral induced similar amount of bone and more than the HABP·CaP hydrogel. Conclusion CPC induced similar amount of bone as bovine mineral and both materials induced more bone than HABP·CaP hydrogel. Clinical significance The CPC is suggested as a synthetic alternative for augmentations in the maxillofacial area.
|
|
