| 1. |
- Munthe, Christian, 1962
(författare)
-
Precaution and Ethics: Handling risks, uncertainties and knowledge gaps in the regulation of new biotechnologies
- 2017
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- This volume outlines and analyses ethical issues actualized by applying a precautionary approach to the regulation of new biotechnologies. It presents a novel way of categorizing and comparing biotechnologies from a precautionary standpoint. Based on this, it addresses underlying philosophical problems regarding the ethical assessment of decision-making under uncertainty and ignorance, and discusses how risks and possible benefits of such technologies should be balanced from an ethical standpoint. It argues on conceptual and ethical grounds for a technology neutral regulation as well as for a regulation that not only checks new technologies but also requires old, inferior ones to be phased out. It demonstrates how difficult ethical issues regarding the extent and ambition of precautionary policies need to be handled by such a regulation, and presents an overarching framework for doing so.
|
|
| 2. |
- Anasontzis, George E, 1980
(författare)
-
Biomass modifying enzymes: From discovery to application
- 2012
-
Ingår i: Oral presentation at the Chalmers Life Science AoA conference.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- It has now been realized that the road towards the bio-based economy is a one-way street, leaving gradually the oil-based technology and driving slowly towards a more sustainable society. The current non-biodegradable hydrocarbon fuels and plastics will be replaced by new products which will derive from natural and renewable resources. The synthesis of such biofuels and biochemicals is still challenged by the difficulties to cost efficiently degrade lignocellulosic material to fermentable sugars or to isolate the intact polymers. Biomass degrading and modifying enzymes play an integral role both in the separation of the polymers from the wood network, as well as in their subsequent modification, prior to further product development.Our group interests focus on all levels of applied enzyme research of biomass acting enzymes: Discovery, assay development, production and application. Relevant examples will be provided: What is our strategy for discovering novel microorganisms and enzymes from the tropical forests and grasslands of Vietnam? How do we design novel real-world assays for enzyme activity determination? Which are the bottlenecks in the enzymatic cellulose hydrolysis? How enzymes can be used to produce high added value compounds from biomass?
|
|
| 3. |
- Ask, Magnus, 1983
(författare)
-
Towards More Robust Saccharomyces cerevisiae Strains for Lignocellulosic Bioethanol Production: Lessons from process concepts and physiological investigations
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Dwindling oil reserves and the negative impacts of fossil fuels on the environment call for more sustainable energy sources. First-generation bioethanol produced from sugar cane and corn has met some of these needs, but it competes with the food supply for raw materials. Lignocellulosic biomass is an abundant non-edible raw material that can be converted to ethanol using the yeast Saccharomyces cerevisiae. However, due to the inherent recalcitrance to degradation of lignocellulosic raw materials, harsh pretreatment methods must be used to liberate fermentable sugars, resulting in the release of compounds such as acetic acid, furan aldehydes and phenolics, that inhibit yeast metabolism. This thesis research aimed to identify bottlenecks in terms of inhibitory compounds related to ethanol production from two lignocellulosic raw materials, Arundo donax and spruce, and furthermore to harness the physiological responses to these inhibitors to engineer more robust yeast strains. A comparative study of separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) revealed that acetic acid limits xylose utilization in pretreated Arundo donax, whereas the furan aldehydes furfural and 5-hydroxymethyl-2-furaldehyde (HMF) were hypothesized to be key inhibitors in pretreated spruce. The impacts of furfural and HMF on the redox and energy metabolism of S. cerevisiae were studied in detail in chemostat and batch cultivations. After adding the inhibitors to the feed medium of chemostat cultivations, the intracellular levels of NADH, NADPH, and ATP were found to decrease by 40, 75, and 19%, respectively, suggesting that furan aldehydes drain the cells of reducing power. A strong effect on redox metabolism was also observed after pulsing furfural and HMF in the xylose consumption phase in batch cultures. The drainage of reducing power was also observed in a genome-wide study of transcription that found that genes related to NADPH-requiring processes, such as nitrogen and sulphur assimilation, were significantly induced. The redox metabolism was engineered by overproducing the protective metabolite and antioxidant glutathione. Strains with an increased intracellular level of reduced glutathione were found to sustain ethanol production for longer duration in SSF of pretreated spruce, yielding 70% more ethanol than did the wild type strain.
|
|
| 4. |
- Ylitervo, Päivi
(författare)
-
Concepts for improving ethanol productivity from lignocellulosic materials : encapsulated yeast and membrane bioreactors
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Lignocellulosic biomass is a potential feedstock for production of sugars, which can be fermented into ethanol. The work presented in this thesis proposes some solutions to overcome problems with suboptimal process performance due to elevated cultivation temperatures and inhibitors present during ethanol production from lignocellulosic materials. In particular, continuous processes operated at high dilution rates with high sugar utilisation are attractive for ethanol fermentation, as this can result in higher ethanol productivity. Both encapsulation and membrane bioreactors were studied and developed to achieve rapid fermentation at high yeast cell density. My studies showed that encapsulated yeast is more thermotolerant than suspended yeast. The encapsulated yeast could successfully ferment all glucose during five consecutive batches, 12 h each at 42 °C. In contrast, freely suspended yeast was inactivated already in the second or third batch. One problem with encapsulation is, however, the mechanical robustness of the capsule membrane. If the capsules are exposed to e.g. high shear forces, the capsule membrane may break. Therefore, a method was developed to produce more robust capsules by treating alginate-chitosan-alginate (ACA) capsules with 3-aminopropyltriethoxysilane (APTES) to get polysiloxane-ACA capsules. Of the ACA-capsules treated with 1.5% APTES, only 0–2% of the capsules broke, while 25% of the untreated capsules ruptured within 6 h in a shear test. In this thesis membrane bioreactors (MBR), using either a cross-flow or a submerged membrane, could successfully be applied to retain the yeast inside the reactor. The cross-flow membrane was operated at a dilution rate of 0.5 h-1 whereas the submerged membrane was tested at several dilution rates, from 0.2 up to 0.8 h-1. Cultivations at high cell densities demonstrated an efficient in situ detoxification of very high furfural levels of up to 17 g L-1 in the feed medium when using a MBR. The maximum yeast density achieved in the MBR was more than 200 g L-1. Additionally, ethanol fermentation of nondetoxified spruce hydrolysate was possible at a high feeding rate of 0.8 h-1 by applying a submerged membrane bioreactor, resulting in ethanol productivities of up to 8 g L-1 h-1. In conclusion, this study suggests methods for rapid continuous ethanol production even at stressful elevated cultivation temperatures or inhibitory conditions by using encapsulation or membrane bioreactors and high cell density cultivations.
|
|
| 5. |
- Franzén, Carl Johan, 1966, et al.
(författare)
-
Multifeed simultaneous saccharification and fermentation enables high gravity submerged fermentation of lignocellulose.
- 2015
-
Ingår i: Recent Advances in Fermentation Technology (RAFT 11), Clearwater Beach, Florida, USA, November 8-11, 2015. Oral presentation..
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Today, second generation bioethanol production is becoming established in production plants across the world. In addition to its intrinsic value, the process can be viewed as a model process for biotechnological conversion of recalcitrant lignocellulosic raw materials to a range of chemicals and other products. So called High Gravity operation, i.e. fermentation at high solids loadings, represents continued development of the process towards higher product concentrations and productivities, and improved energy and water economy. We have employed a systematic, model-driven approach to the design of feeding schemes of solid substrate, active yeast adapted to the actual substrate, and enzymes to fed-batch simultaneous saccharification and co-fermentation (Multifeed SSCF) of steam-pretreated lignocellulosic materials in stirred tank reactors. With this approach, mixing problems were avoided even at water insoluble solids contents of 22%, leading to ethanol concentrations of 56 g/L within 72 hours of SSCF on wheat straw. Similar fermentation performance was verified in 10 m3 demonstration scale using wheat straw, and in lab scale on birch and spruce, using several yeast strains. The yeast was propagated in the liquid fraction obtained by press filtration of the pretreated slurry. Yet, even with such preadaptation and repeated addition of fresh cells, the viability in the SSCF dropped due to interactions between lignocellulose-derived inhibitors, the produced ethanol and the temperature. Decreasing the temperature from 35 to 30°C when the ethanol concentration reached 40-50 g/L resulted in rapid initial hydrolysis, maintained fermentation capacity, lower residual glucose and xylose and ethanol concentrations above 60 g/L.
|
|
| 6. |
- Mayers, Joshua, 1988, et al.
(författare)
-
Integrating Microalgal Production with Industrial Outputs - Reducing Process Inputs and Quantifying the Benefits
- 2016
-
Ingår i: Industrial Biotechnology. - : Mary Ann Liebert Inc. - 1550-9087 .- 1931-8421. ; 12:4, s. 219-234
-
Tidskriftsartikel (refereegranskat)abstract
- The cultivation and processing of microalgal biomass is resource- and energy-intensive, negatively affecting the sustainability and profitability of producing bulk commodities, limiting this platform to the manufacture of relatively small quantities of high-value compounds. A biorefinery approach where all fractions of the biomass are valorized might improve the case for producing lower-value products. However, these systems are still likely to operate very close to thresholds of profitability and energy balance, with wide-ranging environmental and societal impacts. It thus remains critically important to reduce the use of costly and impactful inputs and energy-intensive processes involved in these scenarios. Integration with industrial infrastructure can provide a number of residual streams that can be readily used during microalgal cultivation and downstream processing. This review critically considers some of the main inputs required for microalgal biorefineries - such as nutrients, water, carbon dioxide, and heat - and appraises the benefits and possibilities for industrial integration on a more quantitative basis. Recent literature and demonstration studies will also be considered to best illustrate these benefits to both producers and industrial operators. Additionally, this review will highlight some inconsistencies in the data used in assessments of microalgal production scenarios, allowing more accurate evaluation of potential future biorefineries.
|
|
| 7. |
- Wang, Ruifei, 1985, et al.
(författare)
-
Model-based optimization and scale-up of multi-feed simultaneous saccharification and co-fermentation of steam pre-treated lignocellulose enables high gravity ethanol production.
- 2016
-
Ingår i: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834 .- 1754-6834. ; 9:1, s. 88-
-
Tidskriftsartikel (refereegranskat)abstract
- High content of water-insoluble solids (WIS) is required for simultaneous saccharification and co-fermentation (SSCF) operations to reach the high ethanol concentrations that meet the techno-economic requirements of industrial-scale production. The fundamental challenges of such processes are related to the high viscosity and inhibitor contents of the medium. Poor mass transfer and inhibition of the yeast lead to decreased ethanol yield, titre and productivity. In the present work, high-solid SSCF of pre-treated wheat straw was carried out by multi-feed SSCF which is a fed-batch process with additions of substrate, enzymes and cells, integrated with yeast propagation and adaptation on the pre-treatment liquor. The combined feeding strategies were systematically compared and optimized using experiments and simulations.
|
|
| 8. |
- Ylitervo, Päivi, et al.
(författare)
-
Continuous Ethanol Production with a Membrane Bioreactor at High Acetic Acid Concentrations
- 2014
-
Ingår i: Membranes. - : MDPI. - 2077-0375. ; 4:3, s. 372-387
-
Tidskriftsartikel (refereegranskat)abstract
- The release of inhibitory concentrations of acetic acid from lignocellulosic raw materials during hydrolysis is one of the main concerns for 2nd generation ethanol production. The undissociated form of acetic acid can enter the cell by diffusion through the plasma membrane and trigger several toxic effects, such as uncoupling and lowered intracellular pH. The effect of acetic acid on the ethanol production was investigated in continuous cultivations by adding medium containing 2.5 to 20.0 g•L−1 acetic acid at pH 5.0, at a dilution rate of 0.5 h−1. The cultivations were performed at both high (~25 g•L−1) and very high (100–200 g•L−1) yeast concentration by retaining the yeast cells inside the reactor by a cross-flow membrane in a membrane bioreactor. The yeast was able to steadily produce ethanol from 25 g•L−1 sucrose, at volumetric rates of 5–6 g•L−1•h−1 at acetic acid concentrations up to 15.0 g•L−1. However, the yeast continued to produce ethanol also at a concentration of 20 g•L−1 acetic acid but at a declining rate. The study thereby demonstrates the great potential of the membrane bioreactor for improving the robustness of the ethanol production based on lignocellulosic raw materials.
|
|
| 9. |
- Jansson, Ronnie, et al.
(författare)
-
Functionalized silk assembled from a recombinant spider silk fusion protein (Z-4RepCT) produced in the methylotrophic yeast Pichia pastoris
- 2016
-
Ingår i: Biotechnology Journal. - : Wiley-VCH Verlagsgesellschaft. - 1860-6768 .- 1860-7314. ; 11:5, s. 687-699
-
Tidskriftsartikel (refereegranskat)abstract
- Functional biological materials are a growing research area with potential applicability in medicine and biotechnology. Using genetic engineering, the possibility to introduce additional functions into spider silk-based materials has been realized. Recently, a recombinant spider silk fusion protein, Z-4RepCT, was produced intracellularly in Escherichia coli and could after purification self-assemble into silk-like fibers with ability to bind antibodies via the IgG-binding Z domain. In this study, the use of the methylotrophic yeast Pichia pastoris for production of Z-4RepCT has been investigated. Temperature, pH and production time were influencing the amount of soluble Z-4RepCT retrieved from the extracellular fraction. Purification of secreted Z-4RepCT resulted in a mixture of full-length and degraded silk proteins that failed to self-assemble into fibers. A position in the C-terminal domain of 4RepCT was identified as being subjected to proteolytic cleavage by proteases in the Pichia culture supernatant. Moreover, the C-terminal domain was subjected to glycosylation during production in P. pastoris. These observed alterations of the CT domain are suggested to contribute to the failure in fiber assembly. As alternative approach, Z-4RepCT retrieved from the intracellular fraction, which was less degraded, was used and shown to retain ability to assemble into silk-like fibers after enzymatic deglycosylation.
|
|
| 10. |
- Skoog, Emma, 1983, et al.
(författare)
-
Biobased adipic acid – The challenge of developing the production host
- 2018
-
Ingår i: Biotechnology Advances. - : Elsevier BV. - 0734-9750. ; 36:8, s. 2248-2263
-
Forskningsöversikt (refereegranskat)abstract
- Adipic acid is a platform chemical, and is the most important commercial dicarboxylic acid. It has been targeted for biochemical conversion as an alternative to present chemical production routes. From the perspective of bioeconomy, several kinds of raw material are of interest including the sugar platform (derived from starch, cellulose or hemicellulose), the lignin platform (aromatics) and the fatty acid platform (lipid derived). Two main biochemical-based production schemes may be employed: (i) direct fermentation to adipic acid, or (ii) fermentation to muconic or glucaric acid, followed by chemical hydrogenation (indirect fermentation). This review presents a comprehensive description of the metabolic pathways that could be constructed and analyzes their respective theoretical yields and metabolic constraints. The experimental yields and titers obtained so far are low, with the exception of processes based on palm oil and glycerol, which have been reported to yield up to 50 g and 68 g adipic acid/L, respectively. The challenges that remain to be addressed in order to achieve industrially relevant production levels include solving redox constraints, and identifying and/or engineering enzymes for parts of the metabolic pathways that have yet to be metabolically demonstrated. This review provides new insights into ways in which metabolic pathways can be constructed to achieve efficient adipic acid production. The production host provides the chassis to be engineered via an appropriate metabolic pathway, and should also have properties suitable for the industrial production of adipic acid. An acidic process pH is attractive to reduce the cost of downstream processing. The production host should exhibit high tolerance to complex raw material streams and high adipic acid concentrations at acidic pH.
|
|
| 11. |
- Olofsson, Martin, 1975-, et al.
(författare)
-
Combined Effects of Nitrogen Concentration and Seasonal Changes on the Production of Lipids in Nannochloropsis oculata
- 2014
-
Ingår i: Marine Drugs. - Basel, Switzerland : MDPI AG. - 1660-3397. ; 12:4, s. 1891-1910
-
Tidskriftsartikel (refereegranskat)abstract
- Instead of sole nutrient starvation to boost algal lipid production, we addressed nutrient limitation at two different seasons (autumn and spring) during outdoor cultivation in flat panel photobioreactors. Lipid accumulation, biomass and lipid productivity and changes in fatty acid composition of Nannochloropsis oculata were investigated under nitrogen (N) limitation (nitrate:phosphate N:P 5, N:P 2.5 molar ratio). N. oculata was able to maintain a high biomass productivity under N-limitation compared to N-sufficiency (N:P 20) at both seasons, which in spring resulted in nearly double lipid productivity under N-limited conditions (0.21 g L−1 day−1) compared to N-sufficiency (0.11 g L−1 day−1). Saturated and monounsaturated fatty acids increased from 76% to nearly 90% of total fatty acids in N-limited cultures. Higher biomass and lipid productivity in spring could, partly, be explained by higher irradiance, partly by greater harvesting rate (~30%). Our results indicate the potential for the production of algal high value products (i.e., polyunsaturated fatty acids) during both N-sufficiency and N-limitation. To meet the sustainability challenges of algal biomass production, we propose a dual-system process: Closed photobioreactors producing biomass for high value products and inoculum for larger raceway ponds recycling waste/exhaust streams to produce bulk chemicals for fuel, feed and industrial material.
|
|
| 12. |
- Bergman, Alexandra Linda, 1985, et al.
(författare)
-
Heterologous phosphoketolase expression redirects flux towards acetate, perturbs sugar phosphate pools and increases respiratory demand in Saccharomyces cerevisiae
- 2019
-
Ingår i: Microbial Cell Factories. - : Springer Science and Business Media LLC. - 1475-2859. ; 18:1
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Phosphoketolases (Xfpk) are a non-native group of enzymes in yeast, which can be expressed in combination with other metabolic enzymes to positively influence the yield of acetyl-CoA derived products by reducing carbon losses in the form of CO2. In this study, a yeast strain expressing Xfpk from Bifidobacterium breve, which was previously found to have a growth defect and to increase acetate production, was characterized. Results: Xfpk-expression was found to increase respiration and reduce biomass yield during glucose consumption in batch and chemostat cultivations. By cultivating yeast with or without Xfpk in bioreactors at different pHs, we show that certain aspects of the negative growth effects coupled with Xfpk-expression are likely to be explained by proton decoupling. At low pH, this manifests as a reduction in biomass yield and growth rate in the ethanol phase. Secondly, we show that intracellular sugar phosphate pools are significantly altered in the Xfpk-expressing strain. In particular a decrease of the substrates xylulose-5-phosphate and fructose-6-phosphate was detected (26% and 74% of control levels) together with an increase of the products glyceraldehyde-3-phosphate and erythrose-4-phosphate (208% and 542% of control levels), clearly verifying in vivo Xfpk enzymatic activity. Lastly, RNAseq analysis shows that Xfpk expression increases transcription of genes related to the glyoxylate cycle, the TCA cycle and respiration, while expression of genes related to ethanol and acetate formation is reduced. The physiological and transcriptional changes clearly demonstrate that a heterologous phosphoketolase flux in combination with endogenous hydrolysis of acetyl-phosphate to acetate increases the cellular demand for acetate assimilation and respiratory ATP-generation, leading to carbon losses. Conclusion: Our study shows that expression of Xfpk in yeast diverts a relatively small part of its glycolytic flux towards acetate formation, which has a significant impact on intracellular sugar phosphate levels and on cell energetics. The elevated acetate flux increases the ATP-requirement for ion homeostasis and need for respiratory assimilation, which leads to an increased production of CO2. A majority of the negative growth effects coupled to Xfpk expression could likely be counteracted by preventing acetate accumulation via direct channeling of acetyl-phosphate towards acetyl-CoA.
|
|
| 13. |
- Nickel, David, 1990
(författare)
-
Process development for platform chemical production from agricultural and forestry residues
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- As part of a bio-based economy, biorefineries are envisaged to sustainably produce platform chemicals via biochemical conversion of agricultural and forestry residues. However, supply risks, the recalcitrance of lignocellulosic biomass, and inhibitor formation during pretreatment impair the economic feasibility of such biorefineries. In this thesis, process design and assessment were developed with the aim of addressing these hurdles and improving the cost-effectiveness of lignocellulose-derived platform chemicals. To expand the feedstock base and reduce operational costs, logging residues served as underutilised and inexpensive raw material. The major impediment in converting logging residues was their high recalcitrance and low cellulose content, which resulted in low attainable ethanol titres during simultaneous saccharification and co-fermentation (SSCF). Pretreatment optimisation reduced inhibitor formation and recalcitrance, and led to enzymatic hydrolysis yields at par with those obtained for stem wood, despite the less favourable chemical composition. Upgrading logging residues with carbohydrate-rich oat hulls increased ethanol titres to >50 g/L using batch SSCF at 20% WIS loadings, demonstrating the potential to further decrease downstream processing costs. To alleviate the toxicity of inhibitors generated during pretreatment, preadaptation was applied to Saccharomyces cerevisiae . Exposure to the inhibitors in the pretreated liquid fraction improved ethanol production during subsequent fermentation. Transferring the concept of preadaptation to lactic acid production by Bacillus coagulans cut the process times by half and more than doubled the average specific lactic acid productivity, showcasing how preadaptation could decrease operational costs. To assess the performance and robustness of process designs against process input variations, a multi-scale variability analysis framework was developed. The framework included models for bioprocess, flowsheet, techno-economic, and life cycle assessment. In a case study, multi-feed processes, in which solids and cells are fed to the process using model-based predictions, were more robust against variable cellulolytic activities than batch SSCFs in a wheat straw-based ethanol biorefinery. The developed framework can be used to identify robust biorefinery process designs, which simultaneously meet technological, economic, and environmental goals.
|
|
| 14. |
- Olsson, Lisbeth, 1963, et al.
(författare)
-
Microbial robustness in bioprocesses
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Yeast is broadly exploited for industrial use, and strains are constantly improved to meet the requirements to produce the targeted product with high yield, productivity and titer. Successful strains have consistent performance also in presence of different perturbations, i.e. their performance is robust. The concept of microbial robustness will be discussed and contrasted to tolerance toward specific stresses. Furthermore, a method to quantitatively assess microbial robustness will be presented. This method allows a high throughput evaluation, in a perturbation space where different cellular function can form the basis for the evaluation. Another important tool box to examine intracellular status in face of pertubations are biosensors. Examples of applying these two methodologies towards microbial robustness will be discussed. We have used the tools to scale down bioprocesses and their perturbation, to follow adaptive laboratory evolution and to gain understanding of subpopulations.
|
|
| 15. |
- Westman, Johan, 1983, et al.
(författare)
-
Current progress in high cell density yeast bioprocesses for bioethanol production
- 2015
-
Ingår i: Biotechnology journal. - : Wiley. - 1860-6768 .- 1860-7314. ; 10:8, s. 1185-1195
-
Forskningsöversikt (refereegranskat)abstract
- High capital costs and low reaction rates are major challenges for establishment of fermentation-based production systems in the bioeconomy. Using high cell density cultures is an efficient way to increase the volumetric productivity of fermentation processes, thereby enabling faster and more robust processes and use of smaller reactors. In this review, we summarize recent progress in the application of high cell density yeast bioprocesses for first and second generation bioethanol production. High biomass concentrations obtained by retention of yeast cells in the reactor enables easier cell reuse, simplified product recovery and higher dilution rates in continuous processes. High local cell density cultures, in the form of encapsulated or strongly flocculating yeast, furthermore obtain increased tolerance to convertible fermentation inhibitors and utilize glucose and other sugars simultaneously, thereby overcoming two additional hurdles for second generation bioethanol production. These effects are caused by local concentration gradients due to diffusion limitations and conversion of inhibitors and sugars by the cells, which lead to low local concentrations of inhibitors and glucose. Quorum sensing may also contribute to the increased stress tolerance. Recent developments indicate that high cell density methodology, with emphasis on high local cell density, offers significant advantages for sustainable second generation bioethanol production.
|
|
| 16. |
- Ferreira, Sofia, et al.
(författare)
-
Metabolic engineering strategies for butanol production in Escherichia coli
- 2020
-
Ingår i: Biotechnology and Bioengineering. - : Wiley. - 0006-3592 .- 1097-0290. ; 117:8, s. 2571-2587
-
Forskningsöversikt (refereegranskat)abstract
- The global market of butanol is increasing due to its growing applications as solvent, flavoring agent, and chemical precursor of several other compounds. Recently, the superior properties of n-butanol as a biofuel over ethanol have stimulated even more interest. (Bio)butanol is natively produced together with ethanol and acetone by Clostridium species through acetone-butanol-ethanol fermentation, at noncompetitive, low titers compared to petrochemical production. Different butanol production pathways have been expressed in Escherichia coli, a more accessible host compared to Clostridium species, to improve butanol titers and rates. The bioproduction of butanol is here reviewed from a historical and theoretical perspective. All tested rational metabolic engineering strategies in E. coli to increase butanol titers are reviewed: manipulation of central carbon metabolism, elimination of competing pathways, cofactor balancing, development of new pathways, expression of homologous enzymes, consumption of different substrates, and molecular biology strategies. The progress in the field of metabolic modeling and pathway generation algorithms and their potential application to butanol production are also summarized here. The main goals are to gather all the strategies, evaluate the respective progress obtained, identify, and exploit the outstanding challenges.
|
|
| 17. |
- Tang, Hongting, et al.
(författare)
-
Efficient yeast surface-display of novel complex synthetic cellulosomes
- 2018
-
Ingår i: Microbial Cell Factories. - : Springer Science and Business Media LLC. - 1475-2859. ; 17:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The self-assembly of cellulosomes on the surface of yeast is a promising strategy for consolidated bioprocessing to convert cellulose into ethanol in one step. Results: In this study, we developed a novel synthetic cellulosome that anchors to the endogenous yeast cell wall protein a-agglutinin through disulfide bonds. A synthetic scaffoldin ScafAGA3 was constructed using the repeated N-terminus of Aga1p and displayed on the yeast cell surface. Secreted cellulases were then fused with Aga2p to assemble the cellulosome. The display efficiency of the synthetic scaffoldin and the assembly efficiency of each enzyme were much higher than those of the most frequently constructed cellulosome using scaffoldin ScafCipA3 from Clostridium thermocellum. A complex cellulosome with two scaffoldins was also constructed using interactions between the displayed anchoring scaffoldin ScafAGA3 and scaffoldin I ScafCipA3 through disulfide bonds, and the assembly of secreted cellulases to ScafCipA3. The newly designed cellulosomes enabled yeast to directly ferment cellulose into ethanol. Conclusions: This is the first report on the development of complex multiple-component assembly system through disulfide bonds. This strategy could facilitate the construction of yeast cell factories to express synergistic enzymes for use in biotechnology.
|
|
| 18. |
- Zhang, Yiming, 1986, et al.
(författare)
-
Engineering yeast mitochondrial metabolism for 3-hydroxypropionate production
- 2023
-
Ingår i: Biotechnology for Biofuels and Bioproducts. - 2731-3654. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: With unique physiochemical environments in subcellular organelles, there has been growing interest in harnessing yeast organelles for bioproduct synthesis. Among these organelles, the yeast mitochondrion has been found to be an attractive compartment for production of terpenoids and branched-chain alcohols, which could be credited to the abundant supply of acetyl-CoA, ATP and cofactors. In this study we explored the mitochondrial potential for production of 3-hydroxypropionate (3-HP) and performed the cofactor engineering and flux control at the acetyl-CoA node to maximize 3-HP synthesis. Results: Metabolic modeling suggested that the mitochondrion serves as a more suitable compartment for 3-HP synthesis via the malonyl-CoA pathway than the cytosol, due to the opportunity to obtain a higher maximum yield and a lower oxygen consumption. With the malonyl-CoA reductase (MCR) targeted into the mitochondria, the 3-HP production increased to 0.27 g/L compared with 0.09 g/L with MCR expressed in the cytosol. With enhanced expression of dissected MCR enzymes, the titer reached to 4.42 g/L, comparable to the highest titer achieved in the cytosol so far. Then, the mitochondrial NADPH supply was optimized by overexpressing POS5 and IDP1, which resulted in an increase in the 3-HP titer to 5.11 g/L. Furthermore, with induced expression of an ACC1 mutant in the mitochondria, the final 3-HP production reached 6.16 g/L in shake flask fermentations. The constructed strain was then evaluated in fed-batch fermentations, and produced 71.09 g/L 3-HP with a productivity of 0.71 g/L/h and a yield on glucose of 0.23 g/g. Conclusions: In this study, the yeast mitochondrion is reported as an attractive compartment for 3-HP production. The final 3-HP titer of 71.09 g/L with a productivity of 0.71 g/L/h was achieved in fed-batch fermentations, representing the highest titer reported for Saccharomyces cerevisiae so far, that demonstrated the potential of recruiting the yeast mitochondria for further development of cell factories.
|
|
| 19. |
- Mukesh Kumar, Awasthi, et al.
(författare)
-
Bacterial dynamics during the anaerobic digestion of toxic citrus fruit waste and semi-continues volatile fatty acids production in membrane bioreactors
- 2022
-
Ingår i: Fuel. - : Elsevier. - 0016-2361 .- 1873-7153. ; 319
-
Tidskriftsartikel (refereegranskat)abstract
- Citrus wastes (CW) are normally toxic to anaerobic digestion (AD) because of flavors such as D-limonene. In this study, bacterial community was evaluated during volatile fatty acids (VFAs) production from CW inoculated by sludge in a membrane bioreactor (MBR) using semi-continuous AD with different organic loading rates (OLR). Four treatments including untreated CW filled with 4 and 8 g center dot VS center dot L(-1)d(-1) OLR (UOLR4 and UOLR8), pretreated Dlimonene-free CW filled with 4 and 8 g center dot VS center dot L(-1)d(-1) OLR (POLR4 and POLR8). The initial inoculum and the CW mixture (DAY0) was used as control for comparison. There was an obviously higher bacterial diversity in raw material (66848 sequences in DAY0), while decreased after AD and higher in POLR4 and POLR8 (65239 and 63916) than UOLR4 and UOLR8 (49158 and 51936). The key bacterial associated with VFAs production mainly affiliated to Firmicutes (37.35-84.73%), Bacteroidetes (0.48-36.87%), and Actinobacteria (0.35-29.38%), and the key genus composed of Lactobacillus, Prevotella, Bacillus, Bacteroides and Olsenella which contributed in VFA generation by degradable complex organic compounds. Noticeably, methanogen completely suppressed after MBR-AD and UOLR4 has greater acid utilizing bacteria (70.09%).
|
|
| 20. |
- Aulitto, Martina, 1991, et al.
(författare)
-
Seed culture pre-adaptation of Bacillus coagulans MA-13 improves lactic acid production in simultaneous saccharification and fermentation
- 2019
-
Ingår i: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834 .- 1754-6834. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background Lignocellulosic biomass is an abundant and sustainable feedstock, which represents a promising raw material for the production of lactic acid via microbial fermentation. However, toxic compounds that affect microbial growth and metabolism are released from the biomass upon thermochemical pre-treatment. So far, susceptibility of bacterial strains to biomass-derived inhibitors still represents a major barrier to lactic acid production from lignocellulose. Detoxification of the pre-treated lignocellulosic material by water washing is commonly performed to alleviate growth inhibition of the production microorganism and achieve higher production rates. Results In this study, we assessed the feasibility of replacing the washing step with integrated cellular adaptation during pre-culture of Bacillus coagulans MA-13 prior to simultaneous saccharification and lactic acid fermentation of steam exploded wheat straw. Using a seed culture pre-exposed to 30% hydrolysate led to 50% shorter process time, 50% higher average volumetric and 115% higher average specific productivity than when using cells from a hydrolysate-free seed culture. Conclusions Pre-exposure of B. coagulans MA-13 to hydrolysate supports adaptation to the actual production medium. This strategy leads to lower process water requirements and combines cost-effective seed cultivation with physiological pre-adaptation of the production strain, resulting in reduced lactic acid production costs.
|
|
| 21. |
- Nickel, David, 1990, et al.
(författare)
-
Multi-scale uncertainty analysis – A tool to systematically consider variability in lignocellulosic bioethanol processes
- 2018
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Bioethanol production processes from lignocellulosic raw materials are highly prone to batch-to-batch variations. For example, raw material compositions and enzymatic activities required to release fermentable sugars from lignocellulose vary significantly between batches. To develop lignocellulosic biofuel processes and evaluate their performance regarding economics and sustainability consistently, tools are required to cope with this variability. In this presentation we will propose a multi-scale uncertainty analysis strategy to propagate input variability throughout system scales. In a first step, we use meta-data obtained from literature to define uncertainties in the process inputs. Utilizing these meta-data, uncertainty analysis is performed on a macro-kinetic model by sampling from the defined uncertain input space. The results of this uncertainty analysis are transferred to process simulations to analyze the impact of input uncertainties on the process mass- and energy balances, and on the economics of building this type of bioprocess. The generated data from process simulations (mass flows, energy integration, and economic data) are in the next step extracted and used as input to an environmental impact assessment of the process. This is done whilst keeping the simulation and systems modeling parameters constant, thus the input variability is propagated throughout the different system scales. The data generated in this integrated approach will then be compared with the variations and uncertainties observed with relevance to the estimated parameters in the process simulation and environmental impact assessment. Based on this consistent strategy, we can analyze the impact of input variability from different system perspectives, identify important bottlenecks for development, and suggest robust and sustainable process designs for different conditions and under given uncertainties. In a case study we demonstrate how integrated kinetic modeling (in Matlab), process simulation (in SuperPro Designer), and environmental impact assessment together with statistical analysis can be used for assessing how variability in enzymatic activities in bioethanol production can be propagated throughout system scales. A macro-kinetic model is used to describe the enzymatic breakdown of lignocellulose-derived polysaccharides into fermentable sugars (saccharification) and the simultaneous fermentation to bioethanol. We discuss the integration of the simulation results of the macro-kinetic model into the flowsheeting software for mass and energy balance generation, and then further on to assess environmental impacts of the process. We will evaluate different process designs regarding their robustness towards input variability. Finally, we also show how propagated uncertainties at different system scales can be integrated to design experiments at laboratory scale so that these focus on the most important parameters for developing robust kinetic models, and include the parameters that are most important for sustainable design of processes and value chains.
|
|
| 22. |
- Nickel, David, 1990, et al.
(författare)
-
Uncertainty analysis as a tool to consistently evaluate lignocellulosic bioethanol processes at different system scales
- 2018
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Lignocellulosic processes are highly prone to batch-to batch variability, e.g. of raw materials and enzyme activities. This variability can be propagated throughout system scales during process development and optimization, influencing the outputs of bioreaction models, techno-economic analyses and life cycle assessments. As these outputs are the main decision variables for designing and developing lignocellulose-based processes, tools are required to evaluate the influences of process variation at different system scales. Uncertainty analysis quantifies the effects of model input variations on model outputs. It is an effective tool to consistently propagate process variation throughout scales and analyse its influence on model outputs. As an example, we use a model describing multi-feed simultaneous saccharification and co-fermentation (SSCF) of wheat straw. During the process enzymes hydrolyse the lignocellulosic material to release glucose which can be converted by microorganisms into ethanol. To investigate the impact of batch-to-batch variability in enzyme cocktails, we collected literature data on the enzymatic activity of Cellic CTec2. Retrieved data were propagated in models at bioreactor, techno-economic analysis and life cycle assessment scale. We show how uncertainty analysis can be used to guide process development by comparing different modes of operation. The method can identify economically feasible process ranges with low environmental impact while increasing the robustness of bioprocesses with high variation in raw material inputs. Furthermore, uncertainty analysis could help to identify relevant parameters to choose as response variables in experimental designs.
|
|
| 23. |
- Pajalic, Oleg, 1964
(författare)
-
BIOCHEMICALS, BIOMATERIALS, AND BIOINNOVATIONS – WHAT CAN WE GET FROM BIOMASS
- 2015
-
Ingår i: 4th SCIENTIFIC SYMPOSIUM WITH INTERNATIONAL PARTICIPATION Environmental resources, sustainable development and food production OPORPH – 2015 Tuzla, Bosnia and Herzegovina November 12-13, 2015.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Environmental changes and oil price has triggered an increased interest in bio-based energy, chemicals and materials in the last decades. Thou the oil price have been dropped recently due to new findings, the transformation towards bio-based economy will continue. EU has pumped hundred millions of EURO in sustainability related research and innovation projects. Sweden has followed the pattern and has been pushed towards the green economy by establishing the vision to create and develop a bio-based economy in the first half of the twenty-first century. Sweden is rich with non-edible bio-mass i.e. forest. Traditionally the forest was used in pulp and paper industry, but digitalization boom requires paradigm shift. Green materials and green chemicals were identified as a big potential. Ambitious research was started supported by Swedish government and industry. Some of the industrial initiatives are:-The new research agenda, NRA 2020, is the collective assessment of Swedish forest-based industries regarding research, development and demonstration, which is necessary for the sector to be able to contribute to achieving. - Chemical cluster in Western Sweden started an initiative called Sustainable Chemistry 2030 with the vision that their business will be based on renewable feedstock and energy and contribute to sustainable society.
|
|
| 24. |
- Perruca Foncillas, Raquel
(författare)
-
Evaluation of biosensors and flow cytometry as monitoring tools in lignocellulosic bioethanol production
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The significant environmental impact of the current fossil fuel-based industry is a major concern for society. Consequently, various initiatives are being undertaken to establish a more sustainable industrial model. One example is via the transition from conventional fossil fuel refineries to biorefineries, where renewable raw materials are utilised. Amongst these raw materials, the use of lignocellulosic biomass from agricultural residues or wood has been favoured, as it does not compete with food or land resources. In particular, extensive research has been conducted to produce biofuels such as bioethanol from lignocellulosic biomass, referred to as second-generation (2G) bioethanol.In this thesis work, the goal was to develop and apply new tools to address challenges encountered in 2G bioethanol production. Specifically, the work focused on monitoring the impact of inhibitory compounds and mixed sugars on the fermentation performance of the yeast Saccharomyces cerevisiae.Inhibitory compounds are released during the pretreatment of the lignocellulosic biomass, a crucial step necessary to break down its complex structure and to enhance sugar accessibility This thesis work specifically focused on the redox imbalance induced in cells exposed to furaldehydes such as furfural or HMF. To study this effect, a biosensor for redox imbalance, TRX2p-yEGFP, was introduced into the cells and its fluorescence signal was monitored in real-time using flow cytometry. One potential strategy for enhancing the cells' tolerance to these inhibitors is to prepare them by introducing lignocellulosic hydrolysate in the feed during cell propagation. During this pre-exposure phase, a transient induction of the TRX2p-yEGFP biosensor signal for redox imbalance was observed, which gradually diminished. This indicated that, by the time of cell collection, the cells had adapted to the inhibitor concentration within the culture. To examine whether an increased induction level of the biosensor at the time of cell collection influenced the fermentation performance, an automated control system was devised. This system utilised data from the flow cytometry analysis to control the level of inhibitors in the cultivation feed. Consequently, when the biosensor signal began to decline, higher amounts of inhibitors were added, as long as the addition did not lead to an increase in the number of damaged cells.A second biosensor was used in this thesis work to investigate the sugar signalling response of S. cerevisiae to the presence of xylose. Xylose is the second most abundant sugar in lignocellulosic biomass; however, naturally, S. cerevisiae cannot metabolise it. Genetically modified S. cerevisiae strains have been generated by introducing heterologous pathways such as the XR/XDH or XI pathways to enable xylose consumption. Nevertheless, xylose consumption rates remain lower compared to glucose. Sugar signalling emerged as a potential bottleneck in the efficient utilisation of xylose. In the present work, the response of the SUC2p-yEGFP biosensor for sugar signalling was found to vary significantly depending on the pathway employed. A higher induction for the strains carrying the XI pathway was associated with poorer growth on xylose. Lastly, the effect of introducing a xylose epimerase capable of catalysing the conversion between the two anomers, α-D-xylopyranose and β-D-xylopyranose, as a strategy to improve xylose consumption was studied. The effect was enzyme-specific and proved to be particularly beneficial in strains utilising the xylose isomerase from Lachnoclostridium phytofermentans.In conclusion, the results presented in this thesis demonstrate how biosensors can facilitate the understanding and monitoring of intracellular processes that occur within the cell under stress conditions and be a key tool for improving production processes.
|
|
| 25. |
- Sánchez I Nogué, Violeta, et al.
(författare)
-
Isolation and characterization of a resident tolerant Saccharomyces cerevisiae strain from a spent sulfite liquor fermentation plant
- 2012
-
Ingår i: AMB Express. - : Springer Science and Business Media LLC. - 2191-0855. ; 2:1, s. 68-
-
Tidskriftsartikel (refereegranskat)abstract
- Spent Sulfite Liquor (SSL) from wood pulping facilities is a sugar rich effluent that can be used as feedstock for ethanol production. However, depending on the pulping process conditions, the release of monosaccharides also generates a range of compounds that negatively affect microbial fermentation. In the present study, we investigated whether endogenous yeasts in SSL-based ethanol plant could represent a source of Saccharomyces cerevisiae strains with a naturally acquired tolerance towards this inhibitory environment. Two isolation processes were performed, before and after the re-inoculation of the plant with a commercial baker’s yeast strain. The isolates were clustered by DNA fingerprinting and a recurrent Saccharomyces cerevisiae strain, different from the inoculated commercial baker’s yeast strain, was isolated. The strain, named TMB3720, flocculated heavily and presented high furaldehyde reductase activity. During fermentation of undiluted SSL, TMB3720 displayed a 4-fold higher ethanol production rate and 1.8-fold higher ethanol yield as compared to the commercial baker’s yeast. Another non-Saccharomyces cerevisiae species, identified as the pentose utilizing Pichia galeiformis, was also recovered in the last tanks of the process where the hexose to pentose sugar ratio and the inhibitory pressure are expected to be the lowest.
|
|
| 26. |
- Tomas-Pejo, Elia, 1980, et al.
(författare)
-
EVALUATION OF EVOLVED AND BARCODED XYLOSE FERMENTING STRAINS FOR BIOETHANOL PRODUCTION FROM LIGNOCELLULOSE
- 2012
-
Ingår i: Science and Technology Day 2012, Chalmers University of Technology, 27th March 2012.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Lignocellulosic raw materials for bioethanol production are today the basis for many ethanol production sites around the world. However, the utilization of engineered yeast strains for second generation ethanol production at large-scale can still be improved. Yeasts mainly use the sugars present in the lignocellulosic biomass but, toxic compounds derived from cellulose, hemicellulose and lignin degradation during pretreatment are also found in the media and inhibit yeast growth. Furthermore, wild type Saccharomyces cerevisiae is not able to ferment xylose which could constitute up to 40% of the lignocellulose material. Hence the recombinant yeast strains must be robust and ferment xylose to ethanol with high yields in the presence of inhibitors.In this study, different evolved xylose fermenting Saccharomyces cerevisiae strains have been compared in ethanol production processes from lignocellulosic hydrolysates. The differences between using single cell transformants and mixed populations will be evaluated in terms of ethanol production in large scale bioreactors.Furthermore, we have established a method to barcode the evolved yeast strains in order to be able to verify their origin. It is of outmost importance that after barcoding the original characteristics of a yeast strain are maintained. Those requirements can only be fulfilled by using a dominant selection principle. We have obtained a few hundred transformants that were shown to contain the new unique barcode DNA sequence via DNA isolation and DNA sequencing. The transformed strains must be able to grow on the lignocellulosic material and consume xylose at the same rate as before the transformation which also was tested in this study.
|
|
| 27. |
- Kanagarajan, Selvaraju, et al.
(författare)
-
Production of functional human fetal hemoglobin in Nicotiana benthamiana for development of hemoglobin-based oxygen carriers
- 2021
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 184, s. 955-966
-
Tidskriftsartikel (refereegranskat)abstract
- Hemoglobin-based oxygen carriers have long been pursued to meet clinical needs by using native hemoglobin (Hb) from human or animal blood, or recombinantly produced Hb, but the development has been impeded by safety and toxicity issues. Herewith we report the successful production of human fetal hemoglobin (HbF) in Nicotiana benthamiana through Agrobacterium tumefaciens-mediated transient expression. HbF is a heterotetrameric protein composed of two identical α- and two identical γ-subunits, held together by hydrophobic interactions, hydrogen bonds, and salt bridges. In our study, the α- and γ-subunits of HbF were fused in order to stabilize the α-subunits and facilitate balanced expression of α- and γ-subunits in N. benthamiana. Efficient extraction and purification methods enabled production of the recombinantly fused endotoxin-free HbF (rfHbF) in high quantity and quality. The transiently expressed rfHbF protein was identified by SDS-PAGE, Western blot and liquid chromatography-tandem mass spectrometry analyses. The purified rfHbF possessed structural and functional properties similar to native HbF, which were confirmed by biophysical, biochemical, and in vivo animal studies. The results demonstrate a high potential of plant expression systems in producing Hb products for use as blood substitutes.
|
|
| 28. |
|
|
| 29. |
- Mukherjee, Vaskar, 1986, et al.
(författare)
-
Phenotypic landscape of non-conventional yeast species for different stress tolerance traits desirable in bioethanol fermentation
- 2017
-
Ingår i: Biotechnology for Biofuels. - : Springer Science and Business Media LLC. - 1754-6834. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Non-conventional yeasts present a huge, yet barely exploited, resource of yeast biodiversity for industrial applications. This presents a great opportunity to explore alternative ethanol-fermenting yeasts that are more adapted to some of the stress factors present in the harsh environmental conditions in second-generation (2G) bioethanol fermentation. Extremely tolerant yeast species are interesting candidates to investigate the underlying tolerance mechanisms and to identify genes that when transferred to existing industrial strains could help to design more stress-tolerant cell factories. For this purpose, we performed a high-throughput phenotypic evaluation of a large collection of non-conventional yeast species to identify the tolerance limits of the different yeast species for desirable stress tolerance traits in 2G bioethanol production. Next, 12 multi-tolerant strains were selected and used in fermentations under different stressful conditions. Five strains out of which, showing desirable fermentation characteristics, were then evaluated in small-scale, semi-anaerobic fermentations with lignocellulose hydrolysates. Results: Our results revealed the phenotypic landscape of many non-conventional yeast species which have not been previously characterized for tolerance to stress conditions relevant for bioethanol production. This has identified for each stress condition evaluated several extremely tolerant non-Saccharomyces yeasts. It also revealed multitolerance in several yeast species, which makes those species good candidates to investigate the molecular basis of a robust general stress tolerance. The results showed that some non-conventional yeast species have similar or even better fermentation efficiency compared to S. cerevisiae in the presence of certain stressful conditions. Conclusion: Prior to this study, our knowledge on extreme stress-tolerant phenotypes in non-conventional yeasts was limited to only few species. Our work has now revealed in a systematic way the potential of non-Saccharomyces species to emerge either as alternative host species or as a source of valuable genetic information for construction of more robust industrial S. serevisiae bioethanol production yeasts. Striking examples include yeast species like Pichia kudriavzevii and Wickerhamomyces anomalus that show very high tolerance to diverse stress factors. This large-scale phenotypic analysis has yielded a detailed database useful as a resource for future studies to understand and benefit from the molecular mechanisms underlying the extreme phenotypes of non-conventional yeast species.
|
|
| 30. |
- Persson, Michael
(författare)
-
Integrated starch and lignocellulose based biorefineries : Synergies and opportunities
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The transition from a reliance on fossil resources to the use of renewables for the production of energy, fuels and chemicals is essential for ensuring the sustainability of continued human development. Plant-based biomass is a renewable resource which can be transformed into all of these products. However, biomass is a heterogeneous material composed of several fractions with different chemical properties. Furthermore, the composition varies between species. In order to maximize the environmental and economic sustainability of biomass-based production, production systems that utilize all fractions of biomass to their fullest potential have to be developed. This is the goal of a biorefinery.The work presented in this thesis mainly revolves around biorefineries that utilize feedstocks rich in starch and lignocellulose together to produce ethanol in an integrated process. The work is focused on comparing the performance of stand-alone and integrated biorefineries by investigating the impact that feedstock blending has on parameters important for the process economy, identifying potential synergies from integration and opportunities for improved material utilization.It was found in this work, that the integration of starch- and lignocellulose-based feedstocks could result in improved ethanol productivity and yield during hydrolysis and fermentation compared to a stand-alone lignocellulose process without losing performance compared to a stand-alone starch-based process.The prospects of introducing a sequential fractionation of the lignocellulosic biomass prior to integration was investigated. It was shown that this method could be used to produce separate fractions enriched in cellulose and lignin as well as improving the hydrolyzabilty of the cellulose fraction. This kind of fractionation could facility the utilization of all biomass fractions in both feedstocks by creating new byproduct streams as well as decreasing negative impacts on existing byproduct streams.
|
|
| 31. |
|
|
| 32. |
- Skvaril, Jan, 1982-, et al.
(författare)
-
Applications of near-infrared spectroscopy (NIRS) in biomass energy conversion processes : A review
- 2017
-
Ingår i: Applied spectroscopy reviews (Softcover ed.). - : Informa UK Limited. - 0570-4928 .- 1520-569X. ; 52:8, s. 675-728
-
Forskningsöversikt (refereegranskat)abstract
- Biomass used in energy conversion processes is typically characterized by high variability, making its utilization challenging. Therefore, there is a need for a fast and non-destructive method to determine feedstock/product properties and directly monitor process reactors. The near-infrared spectroscopy (NIRS) technique together with advanced data analysis methods offers a possible solution. This review focuses on the introduction of the NIRS method and its recent applications to physical, thermochemical, biochemical and physiochemical biomass conversion processes represented mainly by pelleting, combustion, gasification, pyrolysis, as well as biogas, bioethanol, and biodiesel production. NIRS has been proven to be a reliable and inexpensive method with a great potential for use in process optimization, advanced control, or product quality assurance.
|
|
| 33. |
|
|
| 34. |
- Gustafsson, Marcus, 1987-, et al.
(författare)
-
Climate performance of liquefied biomethane with carbon dioxide utilization or storage
- 2024
-
Ingår i: Renewable and sustainable energy reviews. - : Elsevier. - 1364-0321 .- 1879-0690. ; 192
-
Tidskriftsartikel (refereegranskat)abstract
- In the process of upgrading biogas to biomethane for gas grid injection or use as a vehicle fuel, biogenic carbon dioxide (CO₂) is separated and normally emitted to the atmosphere. Meanwhile, there are a number of ways of utilizing CO₂ to reduce the dependency on fossil carbon sources. This article assesses the climate performance of liquefied biomethane for road transport with different options for utilization or storage of CO₂. The analysis is done from a life cycle perspective, covering the required and avoided processes from biogas production to the end use of biomethane and CO₂. The results show that all of the studied options for CO₂ utilization can improve the climate performance of biomethane, in some cases contributing to negative CO₂ emissions. One of the best options, from a climate impact perspective, is to use the CO₂ internally to produce more methane, although continuous supply of hydrogen from renewable sources can be a challenge. Another option that stands out is concrete curing, where CO₂ can both replace conventional steam curing and be stored for a long time in mineral form. Storing CO₂ in geological formations can also lead to negative CO₂ emissions. However, with such long-term storage solutions, opportunities to recycle biogenic CO₂ are lost, together with the possibility of de-fossilizing processes that require carbon, such as chemical production and horticulture.
|
|
| 35. |
- Salomon Johansen, Katja, 1969
(författare)
-
Oxidoreductases in biomass saccharification processes
- 2015
-
Ingår i: Oral presentation, 37th Symposium on biotechnology for fuels and chemicals, San Diego, US 2015.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The inauguration of several commercial scale lignocellulosic ethanol factories within the past few months is a clear sign of the emergence of an industry. The development of an industry is likely to call for further studies of the fundamental principles governing the processes in order to facilitate further optimisation and thus competitive edge. Although impressive improvement in the efficiency of enzyme cocktails for lignocellulose deconstruction has been achieved already, the understanding of this process step is still incomplete. A recent development is the discovery of lytic polysaccharide monooxygenases which has opened a vide avenue for further studies of the mechanism by which plant cell wall are deconstructed in nature as well as in industrial settings. This is truly a new avenue within cellulase research which was in the past exclusively devoted to the study of hydrolases. Other oxidoreductases may also have a role to play. In nature, cellulytic LPMOs work in cooperation with another oxidoreductase, namely cellobiose dehydrogensase, but how the enzymes interact is inadequately described. In addition it has also been reported that laccase and peroxidase may have a positive effect on the saccharification efficiency but the mechanism behind is not understood in detail. The use of oxidoreductases in the production of lignocellulosic ethanol will be discussed in light of current scientific thinking and new insights.
|
|
| 36. |
- Wang, Ruifei, 1985
(författare)
-
Bioprocess development for biochemical conversion of lignocellulose
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Due to its low environmental impact and high maturity of the fuel ethanol market, lignocellulosic ethanol is a promising option for reducing the carbon footprint in the transport sector. The characteristics of lignocellulosic feedstocks, such as varied sugar composition, low sugar density, low solubility, recalcitrance to enzymatic degradation, and inhibitors formed during thermochemical pretreatment, have so far limited the production process, and costs for conversion of lignocellulosic materials to ethanol are still high. In this thesis, I describe the development of a bioconversion process that pushes the limits of simultaneous saccharification and co-fermentation (SSCF) to achieve higher ethanol titre, yield and productivity on lignocellulosic feedstocks. I propose an integrated fed-batch strategy, Multi-Feed SSCF, including feeds of substrates, enzymes and adapted cells to tackle the technical challenges in operating a SSCF process at high substrate loadings. Using insights from experiments and a model-based feeding design, lignocellulose saccharification and fermentation at water insoluble solids (WIS) levels greater than 20% (w/w) was achieved. The multi-feed SSCF concept and model-aided substrate feeding design allowed rapid, reproducible, and scalable bioconversion of lignocellulose, as proven on several lignocellulosic feedstocks in both laboratory and demonstration scales. Ethanol production above 50 g/L in SSCF processes was found to be severely inhibited by the combined effects of ethanol, lignocellulose-derived inhibitors, and higher than standard cultivation temperature (35°C). Cell viability and fermentation improved significantly in a multi-feed SSCF process with a step change in temperature from 35 to 30°C, compared to operation at 35°C throughout. However, introducing the Erg3Tyr185 point mutation which has been reported to render thermotolerance in yeast, did not offer any significant improvement. Cell concentrations were determined by counting in a hemocytometer and colony forming unit assay. Their accuracy and reproducibility in lignocellulosic media, were verified by Design-of-Experiment-based calibration. Applic-ability of real time qPCR and dielectric spectroscopy as potential cell quantification methods was also investigated. With multi-feed of solid substrates, enzyme preparations, and adapted cells, the SSCF process produced > 60 g/L ethanol within 120 h, equivalent to 70% of the theoretical yield of the total sugar input, and 90% of the consumed sugar. The systematic optimisation reported in this work represents a robust and reproducible routine for developing lignocellulose-based processes. It could inspire continuous development of alternative strategies to current fossil-based chemical/fuel processes.
|
|
| 37. |
- Helstad, Amanda, et al.
(författare)
-
Protein extraction from cold-pressed hempseed press cake: From laboratory to pilot scale
- 2022
-
Ingår i: Journal of Food Science. - : Wiley. - 1750-3841 .- 0022-1147. ; 87:1, s. 312-325
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract: During the production of industrial hempseed oil, a press cake is formed as a byproduct, which is often used as animal feed although it contains a high amount of protein that could be used for human consumption. Extracting this valuable protein would reduce food waste and increase the availability of plant-based protein. A protein extraction process based on the pH-shift method was adapted to improve the protein extraction yield from industrial hempseed press cake (HPC). Parameters such as alkali extraction pH, time, and temperature, as well as isoelectric precipitation pH, were investigated in laboratory scale and were thereafter carried out in a pilot trial to explore the suitability for future scale up. The phytic acid content of the extracted protein isolate was also analyzed to investigate any potential inhibitory effect on mineral absorption. A final protein yield of 60.6%, with a precipitated protein content of 90.3% (dw), was obtained using a constant alkali extraction pH of 10.5 for 1 h at room temperature, followed by precipitation at pH 5.5. The pilot trial showed promising results for the future production of industrial hemp protein precipitate on a larger scale, showing a protein yield of 57.0% and protein content of 90.8% (dw). The amount of phytic acid in the protein isolate produced in the optimal laboratory experiment and in the pilot trial was 0.595 and 0.557 g phytic acid/100 g dw, respectively, which is 83%–88% less than in the HPC. This is in the range of other plant-based protein sources (tofu, kidney beans, peas, etc.). Practical Application: Industrial hempseed press cake is a byproduct in the production of industrial hempseed oil, which is mostly used as animal feed, but has the potential to become an additional source of plant-based protein for human consumption with a suitable protein extraction method. The extracted hemp protein could be used to develop new plant-based dairy or meat analog products.
|
|
| 38. |
- Huang, Mingtao, 1984, et al.
(författare)
-
Engineering the protein secretory pathway of Saccharomyces cerevisiae enables improved protein production
- 2018
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 115:47, s. E11025-E11032
-
Tidskriftsartikel (refereegranskat)abstract
- Baker’s yeast Saccharomyces cerevisiae is one of the most important and widely used cell factories for recombinant protein production. Many strategies have been applied to engineer this yeast for improving its protein production capacity, but productivity is still relatively low, and with increasing market demand, it is important to identify new gene targets, especially targets that have synergistic effects with previously identified targets. Despite improved protein production, previous studies rarely focused on processes associated with intracellular protein retention. Here we identified genetic modifications involved in the secretory and trafficking pathways, the histone deacetylase complex, and carbohydrate metabolic processes as targets for improving protein secretion in yeast. Especially modifications on the endosome-to-Golgi trafficking was found to effectively reduce protein retention besides increasing protein secretion. Through combinatorial genetic manipulations of several of the newly identified gene targets, we enhanced the protein production capacity of yeast by more than fivefold, and the best engineered strains could produce 2.5 g/L of a fungal α-amylase with less than 10% of the recombinant protein retained within the cells, using fed-batch cultivation.
|
|
| 39. |
|
|
| 40. |
- Martinez Avila, Hector, 1985, et al.
(författare)
-
Biocompatibility evaluation of densified bacterial nanocellulose hydrogel as an implant material for auricular cartilage regeneration
- 2014
-
Ingår i: Applied Microbiology and Biotechnology. - : Springer Science and Business Media LLC. - 1432-0614 .- 0175-7598. ; 98:17, s. 7423-7435
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial nanocellulose (BNC), synthesized by the bacterium Gluconacetobacter xylinus, is composed of highly hydrated fibrils (99 % water) with high mechanical strength. These exceptional material properties make BNC a novel biomaterial for many potential medical and tissue engineering applications. Recently, BNC with cellulose content of 15 % has been proposed as an implant material for auricular cartilage replacement, since it matches the mechanical requirements of human auricular cartilage. This study investigates the biocompatibility of BNC with increased cellulose content (17 %) to evaluate its response in vitro and in vivo. Cylindrical BNC structures (48 Au 20 mm) were produced, purified in a built-in house perfusion system, and compressed to increase the cellulose content in BNC hydrogels. The reduction of endotoxicity of the material was quantified by bacterial endotoxin analysis throughout the purification process. Afterward, the biocompatibility of the purified BNC hydrogels with cellulose content of 17 % was assessed in vitro and in vivo, according to standards set forth in ISO 10993. The endotoxin content in non-purified BNC (2,390 endotoxin units (EU)/ml) was reduced to 0.10 EU/ml after the purification process, level well below the endotoxin threshold set for medical devices. Furthermore, the biocompatibility tests demonstrated that densified BNC hydrogels are non-cytotoxic and cause a minimal foreign body response. In support with our previous findings, this study concludes that BNC with increased cellulose content of 17 % is a promising non-resorbable biomaterial for auricular cartilage tissue engineering, due to its similarity with auricular cartilage in terms of mechanical strength and host tissue response.
|
|
| 41. |
- Martinez Avila, Hector, 1985
(författare)
-
Biofabrication, Biomechanics and Biocompatibility of Nanocellulose-based Scaffolds for Auricular Cartilage Regeneration
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In about 2:10,000 births the external part of the ear, the auricle, is severely malformed or absent. Furthermore, tumors and trauma can cause defects to the auricle. For patients with dysplasia of the auricle, and especially for children, an inconspicuous outer appearance with life-like auricles is important for their psychological and emotional well being as well as their psycho-social development. Auricular reconstruction remains a great challenge due to the complexity of surgical reconstruction using rib cartilage. Despite the advances in stem cell technology and biomaterials, auricular cartilage tissue engineering (TE) is still in an early stage of development due to critical requirements demanding appropriate mechanical properties and shape stability of the tissue-engineered construct. This thesis has focused on developing patient-specific tissue-engineered auricles for one-step surgery using a novel biomaterial, bacterial nanocellulose (BNC), seeded with human nasoseptal chondrocytes (hNC) and bone marrow mononuclear cells (MNC).Biomechanical properties of human auricle cartilage were measured and used as a benchmark for tuning BNC properties. In order to meet the biomechanical requirements, a scaffold with bilayer architecture composed of a dense BNC support layer and a macroporous structure was designed. Firstly, the biocompatibility of the dense BNC layer was investigated, demonstrating a minimal foreign body response according to standards set forth in ISO 10993. Secondly, different methods to create macroporous BNC scaffolds were studied and the redifferentiation capacity of hNCs was evaluated in vitro; revealing that macroporous BNC scaffolds support cell ingrowth, proliferation and neocartilage formation. The bilayer BNC scaffold was biofabricated and tested for endotoxins and cytotoxicity before evaluating in long-term 3D culture, and subsequently in vivo for eight weeks—in an immunocompromised animal model. The results demonstrated that the non-pyrogenic and non- cytotoxic bilayer BNC scaffold offers a good mechanical stability and maintains a structural integrity, while providing a porous 3D environment that is suitable for hNCs and MNCs to produce neocartilage, in vitro and in vivo. Furthermore, patient-specific auricular BNC scaffolds with bilayer architecture were biofabricated and seeded with autologous rabbit auricular chondrocytes (rAC) for implantation in an immunocompetent rabbit model for six weeks. The results demonstrated the shape stability of the rAC-seeded scaffolds and neocartilage depositions in the immunocompetent autologous grafts. 3D bioprinting was also evaluated for biofabrication of patient-specific, chondrocyte-laden auricular constructs using a bioink composed of nanofibrillated cellulose and alginate. Bioprinted auricular constructs showed an excellent shape and size stability after in vitro culture. Moreover, this bioink supports redifferentiation of hNCs while offering excellent printability, making this a promising approach for auricular cartilage TE. Furthermore, the use of bioreactors is essential for the development of tissue-engineered cartilage in vitro. Thus, a compression bioreactor was utilized to apply dynamic mechanical stimulation to cell-seeded constructs as a means to enhance production of extracellular matrix in vitro.In this work, a potential clinical therapy for auricular reconstruction using tissue-engineered auricles is demonstrated; where BNC is proposed as a promising non-degradable biomaterial with good chemical and mechanical stability for auricular cartilage TE. Although the primary focus of this thesis is on auricular reconstruction, the methods developed are also applicable in the regeneration of other cartilage tissues such as those found in the nose, trachea, spine and articular joints.
|
|
| 42. |
- Malina, Carl, 1992, et al.
(författare)
-
Adaptations in metabolism and protein translation give rise to the Crabtree effect in yeast
- 2021
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 118:51
-
Tidskriftsartikel (refereegranskat)abstract
- Aerobic fermentation, also referred to as the Crabtree effect in yeast, is a well-studied phenomenon that allows many eukaryal cells to attain higher growth rates at high glucose availability. Not all yeasts exhibit the Crabtree effect, and it is not known why Crabtree-negative yeasts can grow at rates comparable to Crabtree-positive yeasts. Here, we quantitatively compared two Crabtree-positive yeasts, Saccharomyces cerevisiae and Schizosaccharomyces pombe, and two Crabtree-negative yeasts, Kluyveromyces marxianus and Scheffersomyces stipitis, cultivated under glucose excess conditions. Combining physiological and proteome quantification with genome-scale metabolic modeling, we found that the two groups differ in energy metabolism and translation efficiency. In Crabtree-positive yeasts, the central carbon metabolism flux and proteome allocation favor a glucose utilization strategy minimizing proteome cost as proteins translation parameters, including ribosomal content and/or efficiency, are lower. Crabtree-negative yeasts, however, use a strategy of maximizing ATP yield, accompanied by higher protein translation parameters. Our analyses provide insight into the underlying reasons for the Crabtree effect, demonstrating a coupling to adaptations in both metabolism and protein translation.
|
|
| 43. |
|
|
| 44. |
- Tamminen, T., et al.
(författare)
-
Mobile and flexible processing of biomass – EU project Mobile Flip
- 2015
-
Ingår i: VTT Technology. - 2242-1211. ; , s. 28-41
-
Konferensbidrag (refereegranskat)abstract
- EU project MOBILE FLIP in the SPIRE program aims at developing and demonstrating mobile processes for the treatment of underexploited agro- and forest based biomass resources into products and intermediates. The processes are evaluated in terms of raw material flexibility, as the biomass resources are typically scattered and seasonal. Process concepts have been designed around the key technologies pelletizing, torrefaction, slow pyrolysis, hydrothermal pretreatment and carbonisation. The products vary depending on the process concept, being typically fuels as such or for co-combustion (pellets, torrefied pellets, biocoals), biochars for soil remediation, biodegradable pesticides for agricultural or forestry use or chemicals for wood panel industry and sugars and hydrolysable cellulose as intermediate for the sugar platform. The concept evaluations are supported both by research and industrial (SME and large industries) partners in the whole value chains. Dissemination, communication and exploitation activities are an integral part of the project. Life-cycle analysis and a wide sustainability evaluation (economic, environmental and social assessment) are carried out for the process concepts in order to clarify their potential for flexible raw material valorisation. The partners are represented by the coauthors in this presentation: four SMEs, two large companies, six research organizations. The project duration is four years and total budget approximately EUR 10 million.
|
|
| 45. |
- Jers, C., et al.
(författare)
-
Production of 3-hydroxypropanoic acid from glycerol by metabolically engineered bacteria
- 2019
-
Ingår i: Frontiers in Bioengineering and Biotechnology. - : Frontiers Media SA. - 2296-4185. ; 7:MAY
-
Forskningsöversikt (refereegranskat)abstract
- 3-hydroxypropanoic acid (3-HP) is a valuable platform chemical with a high demand in the global market. 3-HP can be produced from various renewable resources. It is used as a precursor in industrial production of a number of chemicals, such as acrylic acid and its many derivatives. In its polymerized form, 3-HP can be used in bioplastic production. Several microbes naturally possess the biosynthetic pathways for production of 3-HP, and a number of these pathways have been introduced in some widely used cell factories, such as Escherichia coli and Saccharomyces cerevisiae. Latest advances in the field of metabolic engineering and synthetic biology have led to more efficient methods for bio-production of 3-HP. These include new approaches for introducing heterologous pathways, precise control of gene expression, rational enzyme engineering, redirecting the carbon flux based on in silico predictions using genome scale metabolic models, as well as optimizing fermentation conditions. Despite the fact that the production of 3-HP has been extensively explored in established industrially relevant cell factories, the current production processes have not yet reached the levels required for industrial exploitation. In this review, we explore the state of the art in 3-HP bio-production, comparing the yields and titers achieved in different microbial cell factories and we discuss possible methodologies that could make the final step toward industrially relevant cell factories.
|
|
| 46. |
|
|
| 47. |
- de Maré, Lena, et al.
(författare)
-
A cultivation technique for E. coli fed-batch cultivations operating close to the maximum oxygen transfer capacity of the reactor
- 2005
-
Ingår i: Biotechnology Letters. - : Springer Science and Business Media LLC. - 0141-5492 .- 1573-6776. ; 27:14, s. 983-990
-
Tidskriftsartikel (refereegranskat)abstract
- A cultivation strategy combining the advantages of temperature-limited fed-batch and probing feeding control is presented. The technique was evaluated in fed-batch cultivations with E. coli BL21(DE3) producing xylanase in a 3 liter bioreactor. A 20% increase in cell mass was achieved and the usual decrease in specific enzyme activity normally observed during the late production phase was diminished with the new technique. The method was further tested by growing E. coli W3110 in a larger bioreactor (50 l). It is a suitable cultivation technique when the O2 transfer capacity of the reactor is reached and it is desired to continue to produce the recombinant protein.
|
|
| 48. |
- Radecka, Dorota, et al.
(författare)
-
Looking beyond Saccharomyces: the potential of non-conventional yeast species for desirable traits in bioethanol fermentation
- 2015
-
Ingår i: FEMS Yeast Research. - : Oxford University Press (OUP). - 1567-1356 .- 1567-1364. ; 15:6
-
Forskningsöversikt (refereegranskat)abstract
- Saccharomyces cerevisiae has been used for millennia in the production of food and beverages and is by far the most studied yeast species. Currently, it is also the most used microorganism in the production of first-generation bioethanol from sugar or starch crops. Second-generation bioethanol, on the other hand, is produced from lignocellulosic feedstocks that are pretreated and hydrolyzed to obtain monomeric sugars, mainly D-glucose, D-xylose and L-arabinose. Recently, S. cerevisiaerecombinant strains capable of fermenting pentose sugars have been generated. However, the pretreatment of the biomass results in hydrolysates with high osmolarity and high concentrations of inhibitors. These compounds negatively influence the fermentation process. Therefore, robust strains with high stress tolerance are required. Up to now, more than 2000 yeast species have been described and some of these could provide a solution to these limitations because of their high tolerance to the most predominant stress conditions present in a second-generation bioethanol reactor. In this review, we will summarize what is known about the non-conventional yeast species showing unusual tolerance to these stresses, namely Zygosaccharomyces rouxii(osmotolerance), Kluyveromyces marxianus and Ogataea (Hansenula) polymorpha(thermotolerance), Dekkera bruxellensis (ethanol tolerance), Pichia kudriavzevii (furan derivatives tolerance) and Z. bailii (acetic acid tolerance).
|
|
| 49. |
|
|
| 50. |
- Agnihotri, Swarnima, et al.
(författare)
-
A Glimpse of the World of Volatile Fatty Acids Production and Application : A review
- 2022
-
Ingår i: Bioengineered. - : Informa UK Limited. - 2165-5979 .- 2165-5987. ; 13:1, s. 1249-1275
-
Forskningsöversikt (refereegranskat)abstract
- Sustainable provision of chemicals and materials is undoubtedly a defining factor in guaranteeing economic, environmental, and social stability of future societies. Among the most sought-after chemical building blocks are volatile fatty acids (VFAs). VFAs such as acetic, propionic, and butyric acids have numerous industrial applications supporting from food and pharmaceuticals industries to wastewater treatment. The fact that VFAs can be produced synthetically from petrochemical derivatives and also through biological routes, for example, anaerobic digestion of organic mixed waste highlights their provision flexibility and sustainability. In this regard, this review presents a detailed overview of the applications associated with petrochemically and biologically generated VFAs, individually or in mixture, in industrial and laboratory scale, conventional and novel applications.
|
|
