2. |
- Hruzova, Katerina
(författare)
-
Potential of Organosolv Lignin Nanoparticles as a Sustainable Flotation Reagent : Towards a Low-Carbon Footprint Mining Industry
- 2024
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The green transition is driving a steep increase in the demand for minerals, which has put the focus on more responsible and sustainable mining practices as there is a growing pressure on mining operations to minimise their environmental footprint, mitigate risks in neighbouring communities, and decrease the consumption of natural resources. In 2022, mineral froth flotation was used to recover 18 million tonnes of copper from copper ore, accounting for 80% of total copper mine output. The mineral froth flotation process can be made more sustainable through the use of bio-based and biodegradable flotation reagents. Currently, xanthates are used as collectors for the recovery of copper-bearing sulfide minerals from sulfide ores. However, xanthates are fossil-based and pose significant risks, particularly to aquatic life and ecosystems. Additionally, a significant part of xanthates is currently obtained from production sites in Asia, which can lead to supply dependency and delays, as evident during the global pandemic.The aim of this thesis was to develop an efficient, sustainable, and environmentally friendly mineral froth flotation process based on total or partial replacement of xanthates with bio-based, biodegradable, and low-carbon footprint organosolv lignin particles (OLP). The lignin was obtained through organosolv fractionation of residual forest biomass, i.e. spruce and birch. The particles were produced via solvent exchange method from the homogenized lignin solution. As a result, 4 different particle types were produced: birch nanoparticles (BN), birch microparticles (BM), spruce nanoparticles (SN), and spruce microparticles (SM). At first, the characterization and surface chemistry study of the OLP was carried out to deepen the understanding of interaction mechanism between the OLP and mineral surfaces. The lignin was characterized by gel permeation chromatography and nuclear magnetic resonance for its molecular size and content of functional groups. While morphology, surface charge and stability in dispersion of the particles was determined using scanning electron microscopy, ζ-potential, and Turbiscan. All 4 particles were spherical with the diameter around 100 nm for nanoparticles and 1μm for microparticles. The ζ-potential measurement showed the surface variation caused by the difference in size and content of functional groups. Spruce particles, SN and SM, had higher negative charge due to higher content of carboxylic and total phenolic groups. Under alkali conditions, the ζ-potential below -20mV for all particles, with the lowest at −55.1 mV for SM. Finaly, the interaction of OLP with mineral surfaces was examined using quartz crystal microbalance. While the attachment of all OLP was very rigid for both, chalcopyrite and pyrite surfaces, the affinity for attachment was notably greater in the case of pyrite compared to chalcopyrite.The OLP was tested in proof-of-concept study on three different ore samples, and improvements in the flotation performance was observed, including better selectivity and increased recovery. The further evaluation of the OLP as flotation reagent was conducted with copper ore samples. The flotation trials were carried out with 600 g of ore sample in laboratory flotation cell. Starting with the dosage study, the results were confirmed in rougher-cleaner flotation tests. However, the OLP could not be used as a sole collector, it was shown that significant part of xanthate in the flotation mix could be replaced by OLP resulting in improved copper recovery and selectivity. Additionally, a synergy was observed when the OLP and xanthate mixture was used as combined reagents performed better than each of them separately at the same dosage. The copper recovery was increased from 82.2% to 88.7% in a semi-pilot rougher flotation when 50% of xanthate was replaced by OLP compared to the xanthate alone. Significant depression of iron recovery was observed when the OLP was utilized, even in absence of lime. Thus, the OLP reagents eliminated the need for lime, which is required on an industrial scale. Further positive effect of OLP application was indicated recovery of other valuable elements in the concentrates, such as cobalt and molybdenum, while there was no increase in penalty elements. The amount of OLP needed was up to 10 g/ton of ore, which is very small amount, and it is roughly 10 times less compared to any other modifier used in such a process. Therefore, this thesis demonstrates the potential of OLP as flotation reagent. If implemented, the proposed flotation system would lead to better resource efficiency and lower environmental impact.
|
|
3. |
- Monção, Maxwel, et al.
(författare)
-
A Parametric Study of the Organosolv Fractionation of Norway Spruce Sawdust
- 2024
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 17:13
-
Tidskriftsartikel (refereegranskat)abstract
- Lignocellulosic biomass represents an excellent alternative to fossil fuels in terms of both energy production and raw material usage for a plethora of daily-use products. Organosolv pretreatment is a fractionation technique able to separate lignocellulosic biomass into individual streams of cellulose, hemicellulose, and lignin under controlled conditions. Sawdust, the by-product of sawmill processing of Picea abies wood, was the subject of our investigation in this work. The aim was to evaluate the effects of different parameters of the organosolv process of spruce sawdust on the yield of components and how this affects the enzymatic saccharification of cellulose. Sixteen distinct pretreatments were performed with ethanol concentrations of 50 and 60% v/v at 180 and 200 °C for 15 and 30 min. Half of the pretreatments contained 1% sulfuric acid as a catalyst, while the other half were acid-free. Thereafter, the effects of different variables on the yield of products were assessed and compared to determine the ideal pretreatment condition. The results showed that cellulose-rich pulps, with cellulose content as high as 55% were generated from an initial mass of 37.7% spruce sawdust with the reactor operating at 180 °C for 30 min using 60% ethanol and 1% sulfuric acid. With the pretreatments performed with the catalyst at 200 °C, hemicellulose was almost entirely removed from the pulps obtained. The recovered hemicellulose fraction was composed mainly of monomers achieving up to 10 g/100 g of biomass. Delignification values of up to 65.7% were achieved with this pretreatment technique. Fractionated lignin presented low levels of sugar and ashes contamination, with values as low as 1.29% w/w. Enzymatic saccharification of the pretreated pulps yielded 78% cellulose hydrolysis, with glucose release higher than 0.54 g/g of biomass, indicating the potential of the pulps to be applied in a fermentation process.
|
|