| 1. |
- Duan, Chunhui, et al.
(författare)
-
Improving Performance of All-Polymer Solar Cells Through Backbone Engineering of Both Donors and Acceptors
- 2018
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 2:12
-
Tidskriftsartikel (refereegranskat)abstract
- All-polymer solar cells (APSCs), composed of semiconducting donor and acceptor polymers, have attracted considerable attention due to their unique advantages compared to polymer-fullerene-based devices in terms of enhanced light absorption and morphological stability. To improve the performance of APSCs, the morphology of the active layer must be optimized. By employing a random copolymerization strategy to control the regularity of the backbone of the donor polymers (PTAZ-TPDx) and acceptor polymers (PNDI-Tx) the morphology can be systematically optimized by tuning the polymer packing and crystallinity. To minimize effects of molecular weight, both donor and acceptor polymers have number-average molecular weights in narrow ranges. Experimental and coarse-grained modeling results disclose that systematic backbone engineering greatly affects the polymer crystallinity and ultimately the phase separation and morphology of the all-polymer blends. Decreasing the backbone regularity of either the donor or the acceptor polymer reduces the local crystallinity of the individual phase in blend films, affording reduced short-circuit current densities and fill factors. This two-dimensional crystallinity optimization strategy locates a PCE maximum at highest crystallinity for both donor and acceptor polymers. Overall, this study demonstrates that proper control of both donor and acceptor polymer crystallinity simultaneously is essential to optimize APSC performance.
|
|
| 2. |
- Li, Zhaojun, 1989, et al.
(författare)
-
High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants
- 2018
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 45, s. 368-379
-
Tidskriftsartikel (refereegranskat)abstract
- Growing interests have been devoted to the synthesis of polymer acceptors as alternatives to fullerene derivatives to realize high-performance and stable all-polymer solar cells (all-PSCs). So far, one of the key factors that limit the performance of all-PSCs is low photocurrent density (normally < 14 mA/cm 2 ). One potential solution is to improve the dielectric constants (ε r ) of polyme r :polymer blends, which tend to reduce the binding energy of excitons, thus boosting the exciton dissociation efficiencies. Nevertheless, the correlation between ε r and photovoltaic performance has been rarely investigated for all-PSCs. In this work, five fluorinated naphthalene diimide (NDI)-based acceptor polymers, with different content of fluorine were synthesized. The incorporation of fluorine increased the ε r of the acceptor polymers and blend films, which improved the charge generation and overall photocurrent of the all-PSCs. As a result, the PTB7-Th:PNDI-FT10 all-PSC attained a high power conversion efficiency (PCE) of 7.3% with a photocurrent density of 14.7 mA/cm 2 , which surpassed the values reported for the all-PSC based on the non-fluorinated acceptor PNDI-T10. Interestingly, similarly high photovoltaic performance was maintained regardless of a large variation of donor:acceptor ratios, which revealed the good morphological tolerance and the potential for robust production capability of all-PSCs.
|
|
| 3. |
- Lin, Baojun, et al.
(författare)
-
Balancing the pre-aggregation and crystallization kinetics enables high efficiency slot-die coated organic solar cells with reduced non-radiative recombination losses
- 2020
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 13:8, s. 2467-2479
-
Tidskriftsartikel (refereegranskat)abstract
- Slot-die coating being compatible with the roll-to-roll technique has been regarded as a promising tool for upscaling the manufacturing of organic solar cells (OSCs). However, there has been a significant gap between the efficiencies of the state-of-the-art spin-coated devices and the scalable processed devices. The active layer morphology is crucial to achieve high efficiency in OSCs, which depends on the conditions of film fabrication. To figure out and optimize the slot-die coating process, a deeper understanding of the film formation kinetics is important. Herein, in situ measurements of the slot-die coating process based on the PM7:IT4F system are demonstrated to illustrate the aggregation and crystallization evolution at various die temperatures and substrate temperatures. OSCs with a high power conversion efficiency of 13.2% are achieved at 60 degrees C die temperature/60 degrees C substrate temperature due to the improved exciton dissociation, charge transport and suppressed non-radiative charge recombination. The optimized morphology is attributed to the balanced polymer pre-aggregation and small molecule crystallization kinetics. The unsuitable die temperature leads to overlarge phase separation and consequently inefficient exciton dissociation while the improper substrate temperature results in weak crystallization and the following shrunken carrier lifetime with strong non-radiative combination. This work provides fundamental understanding on the correlations among processing methodology, solution pre-aggregation, morphology formation kinetics, device physics and device performance and affords guidance for device optimization in scalable manufacturing.
|
|
| 4. |
- Zhao, Fuwen, et al.
(författare)
-
Highly efficient fused ring electron acceptors based on a new undecacyclic core
- 2021
-
Ingår i: Materials Chemistry Frontiers. - : ROYAL SOC CHEMISTRY. - 2052-1537. ; 5:4, s. 2001-2006
-
Tidskriftsartikel (refereegranskat)abstract
- Two FREAs, IUIC-O and IUIC-T, based on an undecacyclic core were developed. IUIC-T having a higher extinction coefficient affords aligned energy levels with PBDB-T, finer nanoscale morphology and more orderly molecular stacking, thus achieving more efficient exciton dissociation and charge transport. Therefore, the PBDB-T:IUIC-T based OSC gains a higher PCE of 13.05%.
|
|
