11. |
- Bergendal, Birgitta, 1947-, et al.
(författare)
-
Implant failure in young children with ectodermal dysplasia : a retrospective evaluation of use and outcome of dental implant treatment in children in Sweden
- 2008
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - Lombard, Illinois, USA : Quintessence Publishing Co, Inc. - 0882-2786 .- 1942-4434. ; 23:3, s. 520-524
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: This study surveyed dental implant treatment in children up to age 16 years in Sweden between 1985 and 2005, with special reference to young children with ectodermal dysplasia (ED) and anodontia in the lower jaw. Materials and Methods: A questionnaire was sent to Swedish specialist clinics in oral and maxillofacial surgery and prosthetic dentistry. Also, the teams who had treated children with ED were asked to submit their records for these children for a discussion on reasons for implant failure. Results: Six out of 30 specialist centers (20%) in Sweden had treated 26 children with dental implants between 1985 and 2005. Twenty-one patients had received 33 implants to replace teeth missing from nonsyndromic agenesis or trauma at ages 14 or 15 years; 2 (6.1%) of these implants were lost. Five children with ED received 14 implants at 5 to 12 years of age; 9 (64.3%) of these implants were lost before loading. Conclusions: Dental implant placement has been a rarely used treatment modality in Swedish children less than 16 years old in the last 20 years. The failure rate in children treated because of tooth agenesis was only slightly higher than that reported for adult individuals, whereas in young children with ED and anodontia in the mandible, implants seemed to present special challenges, and the failure rate was very high. The small jaw size and peroperative conditions, rather than ED per se, were thought to be the main risk factors. Centralizing implant operations in young children with ED and monitoring outcomes in implant registers are strongly advocated. Int J Oral Maxillofacial Implants 2008;23:520–524
|
|
12. |
- Bergkvist, Göran, et al.
(författare)
-
Bone Density at Implant Sites and Its Relationship to Assessment of Bone Quality and Treatment Outcome
- 2010
-
Ingår i: INTERNATIONAL JOURNAL OF ORAL and MAXILLOFACIAL IMPLANTS. - : Quintessence Publishing Co, Inc. - 0882-2786. ; 25:2, s. 321-328
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To investigate the relationship between bone mineral density (BMD) before implant placement, implant stability measures at implant placement, and marginal bone loss of immediately loaded implants after 1 year in situ. Materials and Methods: Consecutively recruited patients received Straumann SLActive implants loaded with fixed provisional prostheses within 24 hours. BMD was measured from computed tomographic images before implant placement. Alveolar bone quality was assessed during surgery. Implant stability-both rotational and as measured with resonance frequency analysis- and marginal bone height were assessed at implant placement and after 1 year. The Pearson correlation coefficient was used to calculate correlations, and significance was considered when P andlt; .05. Results: Twenty-one patients received 137 implants (87 in maxillae and 50 in mandibles). BMD was significantly correlated with bone quality classification in both arches (P andlt; .001). Mean BMD was also significantly correlated with stability values (P andlt; .001). Mean marginal bone loss at implant surfaces differed, but not significantly, at the 1-year follow-up, regardless of BMD values (P = .086) and measured stability (rotational stability P = .34, resonance frequency analysis P = .43) at implant placement. Conclusion: Within the limits of this study, it can be concluded that computed tomographic examination can be used as a preoperative method to assess jawbone density before implant placement, since density values correlate with prevailing methods of measuring implant stability. However, in the short time perspective of 1 year, there were no differences in survival rates or changes in marginal bone level between implants placed in bone tissue of different density.
|
|
13. |
- Bergkvist, Göran, et al.
(författare)
-
Immediately loaded implants supporting fixed prostheses in the edentulous maxilla : A preliminary clinical and radiologic report
- 2005
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - 0882-2786 .- 1942-4434. ; 20:3, s. 399-405
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To evaluate the survival rate of immediately loaded ITI sand-blasted, large-grit, acid-etched (SLA) solid-screw dental implants in the edentulous maxilla after 8 months of loading. Materials and Methods: Twenty-eight patients (mean age 63 years) with edentulous maxillae each received 6 implants and 1 implant-supported fixed provisional prosthesis within 24 hours after surgery. After a mean healing time of 15 weeks, the patient received a definitive, screw-retained, implant-supported fixed prosthesis. A total of 168 implants were placed. Clinical parameters were registered after 1 month of loading with the implant-supported fixed prostheses as well as 8 months after implant place ment. Radiologic examinations and assessments were made at implant placement and after 8 months. Results: The mean marginal bone level at implant placement was 1.6 mm (range 0 to 5.1, SD 1.1) apical of the reference point (the implant shoulder). The mean marginal bone level at the 8-month follow-up was 3.2 mm (range 0.4 to 5.9, SD 1.1) apical of the reference point. Three implants failed during the healing period. Discussion: The improved results in the present study might be a result of the positive effect of splinting the implants immediately after placement Conclusion: ITI SLA solid-screw implants immediately loaded (ie, loaded within 24 hours of placement) and supporting fixed prostheses had successful survival rates after 8 months. The present results constitute a solid base line for future follow-up studies.
|
|
14. |
- Bonfante, Estevam Augusto, et al.
(författare)
-
Biomechanical testing of microblasted, acid-etched/microblasted, anodized, and discrete crystalline deposition surfaces : an experimental study in beagle dogs
- 2013
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - : Quintessence. - 0882-2786 .- 1942-4434. ; 28:1, s. 136-142
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: Modifications in implant surface topography and chemistry may alter the early bone response at different levels. This study characterized four implant surfaces and evaluated the biomechanical fixation and histologic response at early implantation times in a canine radius model. MATERIALS AND METHODS: External-hexagon Branemark-type implants were used with four experimental surfaces: microblasted (MI), acid-etched and microblasted (AAM), anodized (A), and discrete crystalline deposition (DCD). Surface topography was assessed by scanning electron microscopy, interferometry, and x-ray photoelectron spectroscopy. The implants were placed in the central region of the radii of eight beagle dogs and remained in vivo for 10 or 30 days. The implants were torqued to interface failure, and a general linear statistical model with torque as the dependent variable and implant surface and time in vivo as independent variables was used. RESULTS: All surfaces presented were textured, and different surface chemistries were observed. No significant differences between implant surfaces were observed for torque at 10 days. However, at 30 days, the AAM surface presented significantly higher torque values compared to the DCD and A surfaces. Significantly higher torque values were observed at 30 days compared to 10 days (P < .001). CONCLUSIONS: Significantly different biomechanical fixation dependent on surface preparation was observed after 30 days, and all surfaces were biocompatible and osteoconductive.
|
|
15. |
|
|
16. |
- Braian, Michael, et al.
(författare)
-
Tolerance Measurements on Internal- and External-Hexagon Implants
- 2014
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - : Quintessence. - 0882-2786 .- 1942-4434. ; 29:4, s. 846-852
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To measure the horizontal machining tolerances of the interface between internal-and external-hexagon implants and analogs with corresponding components after delivery from the manufacturer. These values may be a valuable tool for evaluating increasing misfit caused by fabrication, processing, and wear. Materials and Methods: Seven implants and seven analogs with external-and internal-hexagon connections (Biomet 3i) with corresponding prefabricated gold cylinders and gold screws, prefabricated cylindric plastic cylinders, and laboratory screws were studied. One set of components from the external and internal groups was measured manually and digitally. Measurements from the test subjects were compared with identical measurements from the virtual model to obtain threshold values. The virtual model was then used to obtain optimally oriented cuts. Results: The horizontal machining tolerances for castable plastic abutments on external implants were 12 +/- 89 mu m, and for internal implants they were 86 +/- 47 mu m. Tolerance measurements on prefabricated gold abutments for external implants were 44 +/- 9 mu m, and for internal implants they were 58 +/- 28 mu m. Conclusion: The groups with metallic components showed the smallest tolerance at < 50 mu m for the external group and < 90 mu m for the internal group. The prefabricated plastic cylinder groups ranged from < 100 mu m for external and < 130 mu m for internal connection.
|
|
17. |
|
|
18. |
|
|
19. |
|
|
20. |
- Chrcanovic, Bruno, et al.
(författare)
-
Intake of Proton Pump Inhibitors Is Associated with an Increased Risk of Dental Implant Failure
- 2017
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - : Quintessence Publishing. - 0882-2786 .- 1942-4434. ; 32:5, s. 1097-1102
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To investigate the association between the intake of proton pump inhibitors (PPIs) and the risk of dental implant failure. Materials and Methods: The present retrospective cohort study is based on patients consecutively treated between 1980 and 2014 with implant-supported/retained prostheses at one specialist clinic. Modern endosseous dental implants with cylindrical or conical design were included, and only complete cases were considered; ie, only those implants with information available for all variables measured were included in the regression model analysis. Zygomatic implants and implants detected in radiographies but without basic information about them in the patients' files were excluded from the study. Implant-and patient-related data were collected. Multilevel mixed-effects parametric survival analysis was used to test the association between PPI exposure (predictor variable) and risk of implant failure (outcome variable), adjusting for several potential confounders. Results: A total of 3,559 implants were placed in 999 patients, with 178 implants reported as failures. The implant failure rates were 12.0% (30/250) for PPI users and 4.5% (148/3,309) for nonusers. A total of 45 out of 178 (25.3%) failed implants were lost up to abutment connection (6 in PPI users, 39 in nonusers), with an early-to-late failure ratio of 0.34:1. The intake of PPIs was shown to have a statistically significant negative effect for implant survival rate (HR 2.811; 95% CI: 1.139 to 6.937; P = .025). Bruxism, smoking, implant length, prophylactic antibiotic regimen, and implant location were also identified as factors with a statistically significant effect on the implant survival rate. Conclusion: This study suggests that the intake of PPIs may be associated with an increased risk of dental implant failure.
|
|