| 11. |
- Crawford, James, et al.
(författare)
-
Epistemic and aleatory uncertainty in recommended, generic rock K-d values used in performance assessment studies
- 2006
-
Ingår i: Scientific Basis for Nuclear Waste Management XXIX. - WARRENDALE, PA : MATERIALS RESEARCH SOCIETY. - 1558998896 ; , s. 251-258
-
Konferensbidrag (refereegranskat)abstract
- Over the past decade or so there has been an explosion in the number of sorption modelling approaches and applications of sorption modelling for understanding and predicting solute transport in natural systems. The most widely used and simplest of all models, however, is that employing a constant distribution coefficient (K-d) relating the sorbed concentration of a solute on a mineral surface and its aqueous concentration. There are a number of reasons why a constant partitioning coefficient is attractive to environmental modellers for predicting radionuclide retardation, and in spite of all the shortcomings and pitfalls associated with such an approach, it remains the leitmotif of most performance assessment transport modelling. This paper examines the scientific basis underpinning the K-d-approach and its broad defensibility in a performance assessment framework. It also examines sources of epistemic and aleatory uncertainty that undermine confidence in K-d-values reported in the open literature. The paper focuses particularly upon the use of so-called "generic" data for generalised rock types that may not necessarily capture the full material property characteristics of site-specific materials. From the examination of recent literature data, it appears that there are still a number of outstanding issues concerning interpretation of experimental laboratory data that need to be considered in greater detail before concluding that the recommended values used in performance assessments are indeed conservative.
|
|
| 12. |
- Di Luccio, Tiziana, et al.
(författare)
-
Synthesis of CdS nanocrystals in polymeric films studied by in-situ GID and GISAXS
- 2015
-
Ingår i: Insights for Energy Materials Using In-Situ Charaterization. - : Springer Science and Business Media LLC. - 0272-9172. - 9781510826625 ; 1810, s. 9-14
-
Konferensbidrag (refereegranskat)abstract
- In this work, we describe the synthesis of CdS nanocrystals in thin polymeric films by in-situ Grazing Incidence Diffraction (GID) and Grazing Incidence Small Angle Scattering (GISAXS). The 2D GISAXS patterns indicate how the precursor structure is altered as the temperature is varied from 25°C to 300°C. At 150°C, the CdS nanocrystals start to arrange themselves in a hexagonal lattice with a lattice parameter of 27 A. The diffraction intensity from the hexagonal lattice reaches a maximum at 170"C and decreases steadily upon further heating above 220°C indicating loss of symmetry. Correspondingly, the GID scans at 170°C show strong crystalline peaks from cubic CdS nanocrystals that are about 2 nm size. The results indicate that a temperature of 170°C is sufficient to synthesize CdS nanocrystals without degradation of the polymer matrix (Topas) in thin films (about 30nm).
|
|
| 13. |
- Dou, Maofeng, et al.
(författare)
-
Nanostructured ZnO-X alloys with tailored optoelectronic properties for solar-energy technologies
- 2013
-
Ingår i: Materials Research Society Symposium Proceedings. - : Materials Research Society.
-
Konferensbidrag (refereegranskat)abstract
- Alloying ZnO with isovalent compounds allows tailoring the material's optoelectronic properties. In this work, we theoretically analyze the ZnO-based alloys ZnO-X ≡ (ZnO)1-x(X)x where X = GaN and InN, employing a first-principles Green's function method GW0 based on the density functional approach. Since the alloy compounds are isovalent to ZnO, we find relatively small distortion of the crystalline structure, however, nanocluster structures are expected to be present in the alloy. ZnO-X reveal intriguing optoelectronic properties. Incorporating GaN or InN in ZnO strongly narrows the energy gap. The band gap energy is reduced from Eg = 3.34 eV in intrinsic ZnO to ∼2.17 and ∼1.89 eV in ZnO-X by alloying ZnO with 25% GaN and InN, respectively. Moreover, clustering enhances the impact on the electronic structure, and the gap energy in ZnO-InN is further reduced to 0.7-1.5 eV if the 25% compound contains nanoclusters. The dielectric function - 2(ω) varies weakly in ZnO-GaN with respect to alloy composition, while it varies rather strongly in ZnO-InN. Hence, by properly growing and designing ZnO-X, the alloy can be optimized for a variety of novel integrated optoelectronic nano-systems.
|
|
| 14. |
- El Daif, O., et al.
(författare)
-
Silver nanodiscs for light scattering in thin epitaxial silicon solar cells: Influence of the disc radius
- 2011
-
Ingår i: Materials Research Society Symposium Proceedings. - : Springer Science and Business Media LLC. - 0272-9172. - 9781627482110 ; 1391, s. 75-80
-
Konferensbidrag (refereegranskat)abstract
- The effect of silver nanoparticles showing localised plasmonic resonances on the efficiency of thin film silicon solar cells is studied. Silver (Ag) nanodiscs were deposited on the surface of silicon cells grown on highly doped silicon substrates, through hole-mask colloidal lithography, which is a low-cost and bottom-up technique. The cells have no back reflector in order to exclusively study the effect of the front surface on their properties. Cells with nanoparticles were compared with both bare silicon cells and cells with an antireflection coating. We optically observe a resonance showing an absorption increase controllable by the disc radius. We also see an increase in efficiency with respect to bare cells, but we see a decrease in efficiency with respect to cells with an antireflection coating due to losses at wavelengths below the plasmon resonance. As the material properties are not notably affected by the particles deposition, the loss mechanism is an important absorption in the nanoparticles. We confirm this by numerical simulations.
|
|
| 15. |
- Ericsson, Torsten, 1938-, et al.
(författare)
-
Studies of residual stress, microcracks, hardness and microstructure of cold compacted metallic green bodies
- 2003
-
Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 759, s. 53-64
-
Tidskriftsartikel (refereegranskat)abstract
- The residual stresses have been measured by X-ray and neutron diffraction on PM green bodies manufactured by conventional and high speed compaction of iron powder with and without added copper and brass powder. Compressive residual stresses are present in a thin layer in both top and side surfaces. They are largest in the side surfaces due to plastic deformation of the surface material caused by the friction forces during ejection out of the die. In the interior of the green body residual stresses exist with certain region under compression (periferical regions) and other under tension (more central regions). It is unclear whether mixing iron powder with brass or copper powder leads to considerable phase stresses between the two phases.
|
|
| 16. |
- Fang, Mej, et al.
(författare)
-
'In-situ' preparation of metal oxide thin films by inkjet printing acetates solutions
- 2013
-
Ingår i: Mater Res Soc Symp Proc. - : Springer Science and Business Media LLC. - 9781605115245 ; , s. 13-20
-
Konferensbidrag (refereegranskat)abstract
- Direct printing of functional oxide thin films could provide a new route to low-cost, efficient and scalable fabrications of electronic devices. One challenge that remains open is to design the inks with long term stability for effective deposition of specific oxide materials of industrial importance. In this paper, we introduce a reliable method of producing stable inks for 'in-situ' deposition of oxide thin films by inkjet printing. The inks were prepared from metal-acetates solutions and printed on a variety of substrates. The acetate precursors were decomposed into oxide films during the subsequent calcination process to achieve the 'in-situ' deposition of the desired oxide films directly on the substrate. By this procedure we have obtained room temperature contamination free ferromagnetic spintronic materials like Fe doped MgO and ZnO films from their acetate(s) solutions. We find that the origin of magnetism in ZnO, MgO and their Fe-doped films to be intrinsic. For a 28 nm thick film of Fe-doped ZnO we observe an enhanced magnetic moment of 16.0 emu/cm3 while it is 5.5 emu/cm3 for the doped MgO film of single pass printed. The origin of magnetism is attributed to cat-ion vacancies. We have also fabricated highly transparent indium tin oxide films with a transparency >95% both in the visible and IR range which is rather unique compared to films grown by any other technique. The films have a nano-porous structure, an added bonus from inkjetting that makes such films advantageous for a broad range of applications.
|
|
| 17. |
- Fang, Mei, 1984-, et al.
(författare)
-
Room temperature ferromagnetism of Fe-doped ZnO and MgO thin films prepared by ink-jet printing
- 2012
-
Ingår i: MRS Proceedings. - : Springer Science and Business Media LLC. - 0272-9172 .- 1946-4274.
-
Konferensbidrag (refereegranskat)abstract
- Room temperature magnetic properties of un-doped, as well as 10 at.% Fe-doped ZnOand MgO single-pass layer of ink-jet printed thin films have been investigated to obtain insightinto the role of the band gaps and mechanisms for the origin of ferromagnetic order in thesematerials. It is found that on doping with Fe, the saturation magnetization is enhanced by severalfoldin both systems when compared with the respective un-doped thin films. For a ~28 nm thickfilm of Fe-doped ZnO (Diluted Magnetic Semiconductor, DMS) we observe an enhancedmoment of 0.465 μB/Fe atom while it is around 0.111μB/Fe atom for the doped MgO (DilutedMagnetic Insulator, DMI) film of comparable thickness. Also, the pure ZnO is far moreferromagnetic than pure MgO at comparable low film thicknesses which can be attributed todefect induced magnetism originating from cat-ion vacancies. However, the film thicknessdependence of the magnetization and the defect concentrations are found to be significantlydifferent in the two systems so that a comparison of the magnetism becomes more complex forthicker films.
|
|
| 18. |
- Fornara, Andrea, 1980-, et al.
(författare)
-
Polymeric/inorganic multifunctional nanoparticles for simultaneous drug delivery and visualization
- 2010
-
Ingår i: Materials Research Society Symposium Proceedings. - 0272-9172 .- 1946-4274. ; 1257
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoparticles consisting of different biocompatible materials are attracting a lot of interest in the biomedical area as useful tools for drug delivery, photo-therapy and contrast enhancement agents in MRI, fluorescence and confocal microscopy. This work mainly focuses on the synthesis of polymeric/inorganic multifunctional nanoparticles (PIMN) based on biocompatible di-block copolymer poly(L,L-lactide-co-ethylene glycol) (PLLA-PEG) via an emulsion-evaporation method. Besides containing a hydrophobic drug (Indomethacin), these polymeric nanoparticles incorporate different visualization agents such as superparamagnetic iron oxide nanoparticles (SPION) and fluorescent Quantum Dots (QDs) that are used as contrast agents for Magnetic Resonance Imaging (MRI) and fluorescence microscopy together. Gold Nanorods are also incorporated in such nanostructures to allow simultaneous visualization and photodynamic therapy. MRI studies are performed with different loading of SPION into PIMN, showing an enhancement in T2 contrast superior to commercial contrast agents. Core-shell QDs absorption and emission spectra are recorded before and after their loading into PIMN. With these polymeric/inorganic multifunctional nanoparticles, both MRI visualization and confocal fluorescence microscopy studies can be performed. Gold nanorods are also synthesized and incorporated into PIMN without changing their longitudinal absorption peak usable for lased excitation and phototherapy. In-vitro cytotoxicity studies have also been performed to confirm the low cytotoxicity of PIMN for further in-vivo studies.
|
|
| 19. |
- Fors, Rickard, et al.
(författare)
-
Comparison of Sol-Gel Derived and Pulsed Laser Deposited Epitaxial La0.67Ca0.33MnO3 Films for IR Bolometer
- 2004
-
Ingår i: Mat. Res. Soc. Symp. Proc.. - : Springer Science and Business Media LLC. ; 811, s. E2.5.1-E2.5.6, s. 379-384
-
Tidskriftsartikel (refereegranskat)abstract
- Epitaxial La0.67Ca0.33MnO3 films have been prepared on LaA1O3 crystals by pulsed laser deposition (PLD) and by a novel all-alkoxide sol-gel technique. Different out-of-plane lattice parameters are found for the as-prepared films, and scanning electron microscopy shows a more porous structure for sol-gel films as compared to PLD films. These differences are largely removed by post-annealing at 1000 °C. Transport measurements show maximum temperature coefficient of resistivity of 8.2 % K-1 at 258 K (PLD) and 6.1 % K-1 at 241 K (sol-gel) and :colossal magnetoresistance at 7 kOe of 35 % at 263 K (PLD) and 32 % at 246 K (sol-gel).
|
|
| 20. |
- Gorbatov, O. I., et al.
(författare)
-
Effect of magnetism on precipitation of Cu in bcc Fe : Ab-initio based modeling
- 2009
-
Ingår i: Scientific basis for nuclear waste management XXXIII. - : Materials Research Society. - 9781605111667 ; , s. 469-476
-
Konferensbidrag (refereegranskat)abstract
- Theoretical modeling of the decomposition in bcc Fe-Cu alloys has been performed using a combined approach which includes ab-initio calculations of the effective cluster interactions and statistical-mechanical (Monte Carlo) simulations. We showed that the effective Cu-Cu and Cu-vacancy interactions in the bcc Fe matrix have a strong dependence on the global magnetic state of iron. As a result, all the related thermodynamic properties of the alloys (such as solubility limit and diffusivity) are expected to have a pronounced non-Arrhenius temperature behavior, originated from variation of the global magnetization with temperature. We find that strong Cu-vacancy interactions in the bcc Fe matrix lead to a remarkable effect of vacancies on the Cu precipitation and significantly modify the alloy decomposition kinetics under irradiation.
|
|
