| 11. |
- Abat, E., et al.
(författare)
-
The ATLAS TRT electronics
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:6
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS inner detector consists of three sub-systems: the pixel detector spanning the radius range 4cm-20cm, the semiconductor tracker at radii from 30 to 52 cm, and the transition radiation tracker (TRT), tracking from 56 to 107 cm. The TRT provides a combination of continuous tracking with many projective measurements based on individual drift tubes (or straws) and of electron identification based on transition radiation from fibres or foils interleaved between the straws themselves. This paper describes the on and off detector electronics for the TRT as well as the TRT portion of the data acquisition (DAQ) system.
|
|
| 12. |
- Abat, E., et al.
(författare)
-
The ATLAS TRT end-cap detectors
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS TRT end-cap is a tracking drift chamber using 245,760 individual tubular drift tubes. It is a part of the TRT tracker which consist of the barrel and two end-caps. The TRT end-caps cover the forward and backward pseudo-rapidity region 1.0 < vertical bar eta vertical bar < 2.0, while the TRT barrel central eta region vertical bar eta vertical bar < 1.0. The TRT system provides a combination of continuous tracking with many measurements in individual drift tubes ( or straws) and of electron identification based on transition radiation from fibers or foils interleaved between the straws themselves. Along with other two sub-systems, namely the Pixel detector and Semi Conductor Tracker (SCT), the TRT constitutes the ATLAS Inner Detector. This paper describes the recently completed and installed TRT end-cap detectors, their design, assembly, integration and the acceptance tests applied during the construction.
|
|
| 13. |
|
|
| 14. |
- Thoma, B, et al.
(författare)
-
An international, interprofessional investigation of the self-reported podcast listening habits of emergency clinicians: A METRIQ Study
- 2020
-
Ingår i: CJEM. - : Springer Science and Business Media LLC. - 1481-8043 .- 1481-8035. ; 22:1, s. 112-117
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectivesPodcasts are increasingly being used for medical education. A deeper understanding of usage patterns would inform both producers and researchers of medical podcasts. We aimed to determine how and why podcasts are used by emergency medicine and critical care clinicians.MethodsAn international interprofessional sample (medical students, residents, physicians, nurses, physician assistants, and paramedics) was recruited through direct contact and a multimodal social media (Twitter and Facebook) campaign. Each participant completed a survey outlining how and why they utilize medical podcasts. Recruitment materials included an infographic and study website.Results390 participants from 33 countries and 4 professions (medicine, nursing, paramedicine, physician assistant) completed the survey. Participants most frequently listened to medical podcasts to review new literature (75.8%), learn core material (75.1%), and refresh memory (71.8%). The majority (62.6%) were aware of the ability to listen at increased speeds, but most (76.9%) listened at 1.0 x (normal) speed. All but 25 (6.4%) participants concurrently performed other tasks while listening. Driving (72.3%), exercising (39.7%), and completing chores (39.2%) were the most common. A minority of participants used active learning techniques such as pausing, rewinding, and replaying segments of the podcast. Very few listened to podcasts multiple times.ConclusionsAn international cohort of emergency clinicians use medical podcasts predominantly for learning. Their listening habits (rarely employing active learning strategies and frequently performing concurrent tasks) may not support this goal. Further exploration of the impact of these activities on learning from podcasts is warranted.
|
|
| 15. |
|
|
| 16. |
- Jenniskens, Peter, et al.
(författare)
-
Fall, recovery, and characterization of the Novato L6 chondrite breccia
- 2014
-
Ingår i: Meteoritics and Planetary Science. - : Wiley. - 1086-9379. ; 49:8, s. 1388-1425
-
Tidskriftsartikel (refereegranskat)abstract
- The Novato L6 chondrite fragmental breccia fell in California on 17 October 2012, and was recovered after the Cameras for Allsky Meteor Surveillance (CAMS) project determined the meteor's trajectory between 95 and 46 km altitude. The final fragmentation from 42 to 22 km altitude was exceptionally well documented by digital photographs. The first sample was recovered before rain hit the area. First results from a consortium study of the meteorite's characterization, cosmogenic and radiogenic nuclides, origin, and conditions of the fall are presented. Some meteorites did not retain fusion crust and show evidence of spallation. Before entry, the meteoroid was 35 +/- 5 cm in diameter (mass 80 +/- 35 kg) with a cosmic-ray exposure age of 9 +/- 1 Ma, if it had a one-stage exposure history. A two-stage exposure history is more likely, with lower shielding in the last few Ma. Thermoluminescence data suggest a collision event within the last similar to 0.1 Ma. Novato probably belonged to the class of shocked L chondrites that have a common shock age of 470 Ma, based on the U, Th-He age of 420 +/- 220 Ma. The measured orbits of Novato, Jesenice, and Innisfree are consistent with a proposed origin of these shocked L chondrites in the Gefion asteroid family, perhaps directly via the 5: 2 mean-motion resonance with Jupiter. Novato experienced a stronger compaction than did other L6 chondrites of shock-stage S4. Despite this, a freshly broken surface shows a wide range of organic compounds.
|
|
| 17. |
|
|
| 18. |
- Cwetanski, P, et al.
(författare)
-
Acceptance tests and criteria of the ATLAS transition radiation tracker
- 2005
-
Ingår i: IEEE Transactions on Nuclear Science. - 0018-9499. ; 52:6, s. 2911-2916
-
Tidskriftsartikel (refereegranskat)abstract
- The Transition Radiation Tracker (TRT) sits at the outermost part of the ATLAS Inner Detector, encasing the Pixel Detector and the Semi-Conductor Tracker (SCT). The TRT combines charged particle track reconstruction with electron identification capability. This is achieved by layers of xenonfilled straw tubes with periodic radiator foils or fibers providing TR photon emission. The design and choice of materials have been optimized to cope with the harsh operating conditions at the LHC, which are expected to lead to an accumulated radiation dose of 10 Mrad and a neutron fluence of up to 2 . 10(14) n/cm(2) after ten years of operation. The TRT comprises a barrel containing 52 000 axial straws and two end-cap parts with 320 000 radial straws. The total of 420 000 electronic channels (two channels per barrel straw) allows continuous tracking with many projective measurements (more than 30 straw hits per track). The assembly of the barrel modules in the US has recently been completed, while the end-cap wheel construction in Russia has reached the 50% mark. After testing at the production sites and shipment to CERN, all modules and wheels undergo a series of quality and conformity measurements. These acceptance tests survey dimensions, wire tension, gas-tightness, high-voltage stability and gas-gain uniformity along each individual straw. This paper gives details on the acceptance criteria and measurement methods. An overview of the most important results obtained to-date is also given.
|
|
| 19. |
- Åkesson, Torsten, et al.
(författare)
-
An X-ray scanner for wire chambers
- 2003
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - 0167-5087. ; 507:3, s. 622-635
-
Tidskriftsartikel (refereegranskat)abstract
- The techniques to measure the position of sense wires and field wires, the gas gain and the gas flow rate inside wire chambers using a collimated and filtered X-ray beam are reported. Specific examples are given using barrel modules of the Transition Radiation Tracker of the ATLAS experiment. (C) 2003 Elsevier B.V. All rights reserved.
|
|
| 20. |
- Åkesson, Torsten, et al.
(författare)
-
ATLAS Transition Radiation Tracker test-beam results
- 2004
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002. ; 522:1-2, s. 50-55
-
Konferensbidrag (refereegranskat)abstract
- Several prototypes of the Transition Radiation Tracker for the ATLAS experiment at the LHC have been built and tested at the CERN SPS accelerator. Results from detailed studies of the straw-tube hit registration efficiency and drift-time measurements and of the pion and electron spectra without and with radiators are presented.
|
|
