| 13. |
- Nguyen, Hugo, et al.
(författare)
-
Micropropulsion systems research and manufacture in Sweden
- 2003
-
Ingår i: Proceedings of the 4th Round Table on Micro/Nano Technology for Space, ESTEC, Noordwijk, The Netherlands. - : ESTEC/ESA. ; , s. 476-485
-
Konferensbidrag (refereegranskat)abstract
- Micropropulsion for spacecraft is an enabling technology for many future missions, and may increase the performance and drastically reduce the mass required for advanced propulsion systems. The Swedish activities in micropropulsion at The Angstrom Space Technology Centre (ASTC) are outlined. The research targets two major issues: the development of system parts, and the research into integration techniques and strategies. This paper collects a multitude of devices relevant to the micropropulsion system design, together with representative functional demonstrations. The items are mainly intended for chemical micropropulsion systems or fuel-feed systems for electric propulsion. In particular, gas handling devices, sensors, and actuators are presented. These include silicon nozzles, thin film heaters, suspended microcoil heaters, proportional piezoelectric valves, proportional and isolation valves using phase-change material, thermal throttle flow-regulators, high-pressure regulators, 3D-particle filters, and sensors for strain, pressure, flow, and thrust. Moreover, integration techniques and interface structures are presented, for example low-temperature plasma-assisted silicon wafer bonding, multiwafer bonding, thin film soldering, hermetic electric through-wafer via connections, and multiconnector through-wafer vias. Emphasis is on how these items are designed to allow for system integration in a multiwafer silicon stack, comprising a complete micropropulsion system. In this manner, all items form a parts collection available to the system design. This strategy is exemplified by three micropropulsion systems researched at the ASTC. First, the cold/hot gas micropropulsion system is suitable for small spacecraft or when the demands on stability and pointing precision are extreme. The system performance depends strongly on the use of gas flow control. The complete gas handling system of four independent thrusters is integrated in the assembly of four structured silicon wafers. Each independent thruster contains a proportional valve, sensors for pressure, temperature, and thrust feedback, a converging-diverging micronozzle, and a suspended microcoil heater. The mass of the system is below 60 g. In total, this will provide the spacecraft with a safe, clean, low-powered, redundant, and flexible system for three-axis stabilization and attitude control. Second, a Xenon feed system for ion propulsion is heavily miniaturized using microsystems technology. Basically, a micromachined high-pressure regulator receives the gas from the storage, and the flow is further modulated by a thermally controlled flow restrictor. The flow restrictor microsystem comprises narrow ducts, thin film heaters, suspended parts for heat management, and flow sensors. Hereby, the amount of xenon required by the electric propulsion systems can be promptly delivered. The complete system mass is estimated to 150g. Third, within the EU IST program, the ASTC participates in the development of a micro-pyrotechnic actuator system (Micropyros), suitable for short-duration space propulsion. The Micropyros integrate a full matrix of minute solid combustion rocket engines into panels situated on the spacecraft hull. The thrusters can be individually ignited, and each deliver thrust in the millinewton range. The ASTC focuses on the integration of the propulsion part by low-temperature bonding, and the characterization of the complete system.
|
|
| 14. |
- Ryder, Edward, et al.
(författare)
-
The DrosDel collection : a set of P-element insertions for generating custom chromosomal aberrations in Drosophila melanogaster.
- 2004
-
Ingår i: Genetics. - 0016-6731. ; 167:2, s. 797-813
-
Tidskriftsartikel (refereegranskat)abstract
- We describe a collection of P-element insertions that have considerable utility for generating custom chromosomal aberrations in Drosophila melanogaster. We have mobilized a pair of engineered P elements, p[RS3] and p[RS5], to collect 3243 lines unambiguously mapped to the Drosophila genome sequence. The collection contains, on average, an element every 35 kb. We demonstrate the utility of the collection for generating custom chromosomal deletions that have their end points mapped, with base-pair resolution, to the genome sequence. The collection was generated in an isogenic strain, thus affording a uniform background for screens where sensitivity to genetic background is high. The entire collection, along with a computational and genetic toolbox for designing and generating custom deletions, is publicly available. Using the collection it is theoretically possible to generate >12,000 deletions between 1 bp and 1 Mb in size by simple eye color selection. In addition, a further 37,000 deletions, selectable by molecular screening, may be generated. We are now using the collection to generate a second-generation deficiency kit that is precisely mapped to the genome sequence.
|
|
