| 11. |
- Schultheis, M., et al.
(författare)
-
Gaia Focused Product Release: Spatial distribution of two diffuse interstellar bands
- 2023
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 680
-
Tidskriftsartikel (refereegranskat)abstract
- Diffuse interstellar bands (DIBs) are absorption features seen in optical and infrared spectra of stars and extragalactic objects that are probably caused by large and complex molecules in the galactic interstellar medium (ISM). Here we investigate the Galactic distribution and properties of two DIBs identified in almost six million stellar spectra collected by the Gaia Radial Velocity Spectrometer. These measurements constitute a part of the Gaia Focused Product Release to be made public between the Gaia DR3 and DR4 data releases. In order to isolate the DIB signal from the stellar features in each individual spectrum, we identified a set of 160 000 spectra at high Galactic latitudes (|b| ≥ 65) covering a range of stellar parameters which we consider to be the DIB-free reference sample. Matching each target spectrum to its closest reference spectra in stellar parameter space allowed us to remove the stellar spectrum empirically, without reference to stellar models, leaving a set of six million ISM spectra. Using the star's parallax and sky coordinates, we then allocated each ISM spectrum to a voxel (VOlume piXEL) on a contiguous three-dimensional grid with an angular size of 1.8 (level 5 HEALPix) and 29 unequally sized distance bins. Identifying the two DIBs at 862.1 nm (λ862.1) and 864.8 nm (λ864.8) in the stacked spectra, we modelled their shapes and report the depth, central wavelength, width, and equivalent width (EW) for each, along with confidence bounds on these measurements. We then explored the properties and distributions of these quantities and compared them with similar measurements from other surveys. Our main results are as follows: (1) the strength and spatial distribution of the DIB λ862.1 are very consistent with what was found in Gaia DR3, but for this work we attained a higher signal-to-noise ratio in the stacked spectra to larger distances, which allowed us to trace DIBs in the outer spiral arm and beyond the Scutum-Centaurus spiral arm; (2) we produced an all-sky map below ±65 of Galactic latitude to ∼4000 pc of both DIB features and their correlations; (3) we detected the signals of DIB λ862.1 inside the Local Bubble (≲200 pc); and (4) there is a reasonable correlation with the dust reddening found from stellar absorption and EWs of both DIBs with a correlation coefficient of 0.90 for λ862.1 and 0.77 for λ864.8.
|
|
| 12. |
- Trabucchi, M., et al.
(författare)
-
Gaia Focused Product Release: Radial velocity time series of long-period variables
- 2023
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 680
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity data planned with Data Release 4, this Focused Product Release (FPR) provides radial-velocity time series for a selection of LPV candidates with high-quality observations.Aims. We describe the production and content of the Gaia catalog of LPV radial-velocity time series, and the methods used to compute the variability parameters published as part of the Gaia FPR.Methods. Starting from the DR3 catalog of LPV candidates, we applied several filters to construct a sample of sources with high-quality radial-velocity measurements. We modeled their radial-velocity and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the radial-velocity period and at least one of the G, GBP, or GRP photometric periods.Results. The catalog includes radial-velocity time series and variability parameters for 9614 sources in the magnitude range 6 ≲ G/mag ≲ 14, including a flagged top-quality subsample of 6093 stars whose radial-velocity periods are fully compatible with the values derived from the G, GBP, and GRP photometric time series. The radial-velocity time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great majority of the sources (88%) as genuine LPV candidates, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% of the catalog consists of candidate ellipsoidal binaries. Quality checks against radial velocities available in the literature show excellent agreement. We provide some illustrative examples and cautionary remarks.Conclusions. The publication of radial-velocity time series for almost ten thousand LPV candidates constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog.
|
|
| 13. |
- Weingrill, K., et al.
(författare)
-
Gaia Focused Product Release: Sources from Service Interface Function image analysis: Half a million new sources in omega Centauri
- 2023
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 680
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Gaia's readout window strategy is challenged by very dense fields in the sky. Therefore, in addition to standard Gaia observations, full Sky Mapper (SM) images were recorded for nine selected regions in the sky. A new software pipeline exploits these Service Interface Function (SIF) images of crowded fields (CFs), making use of the availability of the full two-dimensional (2D) information. This new pipeline produced half a million additional Gaia sources in the region of the omega Centauri (ω Cen) cluster, which are published with this Focused Product Release. We discuss the dedicated SIF CF data reduction pipeline, validate its data products, and introduce their Gaia archive table.Aims. Our aim is to improve the completeness of the Gaia source inventory in a very dense region in the sky, ω Cen.Methods. An adapted version of Gaia's Source Detection and Image Parameter Determination software located sources in the 2D SIF CF images. These source detections were clustered and assigned to new SIF CF or existing Gaia sources by Gaia s cross-match software. For the new sources, astrometry was calculated using the Astrometric Global Iterative Solution software, and photometry was obtained in the Gaia DR3 reference system. We validated the results by comparing them to the public Gaia DR3 catalogue and external Hubble Space Telescope data.Results. With this Focused Product Release, 526 587 new sources have been added to the Gaia catalogue in ω Cen. Apart from positions and brightnesses, the additional catalogue contains parallaxes and proper motions, but no meaningful colour information. While SIF CF source parameters generally have a lower precision than nominal Gaia sources, in the cluster centre they increase the depth of the combined catalogue by three magnitudes and improve the source density by a factor of ten.Conclusions. This first SIF CF data publication already adds great value to the Gaia catalogue. It demonstrates what to expect for the fourth Gaia catalogue, which will contain additional sources for all nine SIF CF regions.
|
|
| 14. |
|
|
| 15. |
- Kapoor, Pooja Middha, et al.
(författare)
-
Combined associations of a polygenic risk score and classical risk factors with breast cancer risk
- 2021
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 113:3, s. 329-337
-
Tidskriftsartikel (refereegranskat)abstract
- We evaluated the joint associations between a new 313-variant PRS (PRS313) and questionnaire-based breast cancer risk factors for women of European ancestry, using 72 284 cases and 80 354 controls from the Breast Cancer Association Consortium. Interactions were evaluated using standard logistic regression and a newly developed case-only method for breast cancer risk overall and by estrogen receptor status. After accounting for multiple testing, we did not find evidence that per-standard deviation PRS313 odds ratio differed across strata defined by individual risk factors. Goodness-of-fit tests did not reject the assumption of a multiplicative model between PRS313 and each risk factor. Variation in projected absolute lifetime risk of breast cancer associated with classical risk factors was greater for women with higher genetic risk (PRS313 and family history) and, on average, 17.5% higher in the highest vs lowest deciles of genetic risk. These findings have implications for risk prevention for women at increased risk of breast cancer.
|
|
| 16. |
- McKay, James D., et al.
(författare)
-
Large-scale association analysis identifies new lung cancer susceptibility loci and heterogeneity in genetic susceptibility across histological subtypes
- 2017
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 49:7, s. 1126-1132
-
Tidskriftsartikel (refereegranskat)abstract
- Although several lung cancer susceptibility loci have been identified, much of the heritability for lung cancer remains unexplained. Here 14,803 cases and 12,262 controls of European descent were genotyped on the OncoArray and combined with existing data for an aggregated genomewide association study (GWAS) analysis of lung cancer in 29,266 cases and 56,450 controls. We identified 18 susceptibility loci achieving genome-wide significance, including 10 new loci. The new loci highlight the striking heterogeneity in genetic susceptibility across the histological subtypes of lung cancer, with four loci associated with lung cancer overall and six loci associated with lung adenocarcinoma. Gene expression quantitative trait locus (eQTL) analysis in 1,425 normal lung tissue samples highlights RNASET2, SECISBP2L and NRG1 as candidate genes. Other loci include genes such as a cholinergic nicotinic receptor, CHRNA2, and the telomere-related genes OFBC1 and RTEL1. Further exploration of the target genes will continue to provide new insights into the etiology of lung cancer.
|
|
| 17. |
- Neagu, R. C., et al.
(författare)
-
Processing and mechanical properties of novel wood fibre composites foams
- 2009
-
Ingår i: ICCM International Conferences on Composite Materials.
-
Konferensbidrag (refereegranskat)abstract
- Wood fibre reinforced polylactic acid (PLA) composite foams have been successfully produced using supercritical carbon dioxide. A significant increase of specific properties, both stiffness and strength, was achieved by adding 5-10 wt% wood fibres. The experimental stiffness was comparable with a superposed micromechanical model for a three phase fibre reinforced foam. These first results on the integration of wood fibres into cellular PLA polymer are very encouraging.
|
|
| 18. |
- Helander, Mikael, et al.
(författare)
-
Parameters Affecting the Cross-flow Filtration of Dissolved LignoBoost Kraft Lignin
- 2015
-
Ingår i: Journal of wood chemistry and technology. - : Taylor & Francis Group. - 0277-3813 .- 1532-2319. ; 36:1, s. 1-8
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- In the kraft pulping process, the lignin-containing by-product kraft black liquor is currently combusted as an energy source. LignoBoost is a technique that extracts lignin from kraft black liquor, resulting in a lignin-lean black liquor, which is returned to the process, and an extracted kraft lignin. To facilitate the use of the extracted kraft lignin in high-value applications, it can be refined via fractionation to produce a more homogeneous starting raw material. Hence, the aim of this study is to investigate the behavior of dissolved softwood kraft lignin during cross-flow filtration. The effects of the lignin concentration, pH, and ionic strength on the fractionation of the dissolved lignin during cross-flow filtration are investigated. The results indicate that large amounts of low-molecular-weight kraft lignin can be produced from solutions having a low lignin concentration. Furthermore, the effects of pH and ionic strength on the fractionation of low-molecular-weight lignin are identified within the studied ranges.
|
|
| 19. |
- Nosach, L.V, et al.
(författare)
-
Gas-phase crosslinking of the lignin on the nanoscale fumed silica surface
- 2021
-
Ingår i: PHYSICS AND CHEMISTRY OF SOLID STATE. - : Vasyl Stefanyk Precarpathian National University. - 1729-4428 .- 2309-8589. ; 22:4, s. 724-728
-
Tidskriftsartikel (refereegranskat)abstract
- A method for the polymerization modification of nanoscale fumed silica by crosslinking a lignin layer adsorbed on a nanosilica surface under a gas dispersion medium is described. A mixture of phenol and formaldehyde in the presence of HCl proved to be the most effective crosslinking agent. It has been suggested that the crosslinking of lignin molecules occurs by a mechanism similar to the production of phenol formaldehyde resins.
|
|
| 20. |
- Sevastyanova, Olena, et al.
(författare)
-
Bleaching of eucalyptus kraft pulps with chlorine dioxide : Factors affecting the efficiency of the final D stage
- 2011
-
Ingår i: Int. Pulp Bleach. Conf., IPBC. - 9781618394347 ; , s. 376-403
-
Konferensbidrag (refereegranskat)abstract
- The bleaching efficiency of the final D stage in the D 0(EP) D 1D 2 bleaching sequence was investigated focusing on the effect of pH in relation to the bleaching history of pulp samples. The pulps used were unbleached kraft Eucalyptus grandis pulps with a kappa number of 14.8, and the same pulp oxygen-delignified to kappa numbers 12 and 9.8. The samples were bleached according to the D 0(EP)D 1 sequence to a brightness of about 86% ISO and then submitted to the final D 2 stage under identical conditions. The target final brightness was 90.5% ISO. Changes in the kappa number, brightness, viscosity and contents of hexenuronic acid (HexA), 4-O-methylglucuronic acid and the total amount of carboxylic acid groups in pulps were monitored during the bleaching sequence. The target brightness in the D 2 stage was achieved for all pulps, but this required a different final pH for individual samples, indicating dissimilarities between chromophore types in them. In general, brightness increased as the pH increased from 3 to 6. The optimal value with respect to pulp viscosity was between pH 3 and 5. Despite unlike conditions applied in previous bleaching stages, the samples after the D 1 stage revealed similar residual lignin contents as shown by kappa number analysis. The content of hexenuronic acid in the samples was, however, found to vary broadly in the range from 2 to 26 mmol/kg. Conductometric titration showed different amounts of carboxylic (COOH) groups in pulps after the D 1 stage, of which HexA accounted for only a minor part. Since the content of 4-O-methylglucuronic acid groups was similar for all samples, the difference in the amount of COOH groups was mainly associated with oxidation of the residual lignin. Some of the charges might also originate from oxidized cellulose. It was concluded that the variations in the fiber charge result from the different bleaching conditions applied prior to the D 1 stage.
|
|
