| 11. |
- Mishra, A, et al.
(author)
-
Diminishing benefits of urban living for children and adolescents' growth and development
- 2023
-
In: Nature. - : Springer Science and Business Media LLC. - 1476-4687 .- 0028-0836. ; 615:7954, s. 874-883
-
Journal article (peer-reviewed)abstract
- Optimal growth and development in childhood and adolescence is crucial for lifelong health and well-being1–6. Here we used data from 2,325 population-based studies, with measurements of height and weight from 71 million participants, to report the height and body-mass index (BMI) of children and adolescents aged 5–19 years on the basis of rural and urban place of residence in 200 countries and territories from 1990 to 2020. In 1990, children and adolescents residing in cities were taller than their rural counterparts in all but a few high-income countries. By 2020, the urban height advantage became smaller in most countries, and in many high-income western countries it reversed into a small urban-based disadvantage. The exception was for boys in most countries in sub-Saharan Africa and in some countries in Oceania, south Asia and the region of central Asia, Middle East and north Africa. In these countries, successive cohorts of boys from rural places either did not gain height or possibly became shorter, and hence fell further behind their urban peers. The difference between the age-standardized mean BMI of children in urban and rural areas was <1.1 kg m–2 in the vast majority of countries. Within this small range, BMI increased slightly more in cities than in rural areas, except in south Asia, sub-Saharan Africa and some countries in central and eastern Europe. Our results show that in much of the world, the growth and developmental advantages of living in cities have diminished in the twenty-first century, whereas in much of sub-Saharan Africa they have amplified.
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
- Barucca, G., et al.
(author)
-
The potential of Λ and Ξ- studies with PANDA at FAIR
- 2021
-
In: European Physical Journal A. - : Springer Nature. - 1434-6001 .- 1434-601X. ; 57:4
-
Journal article (peer-reviewed)abstract
- The antiproton experiment PANDA at FAIR is designed to bring hadron physics to a new level in terms of scope, precision and accuracy. In this work, its unique capability for studies of hyperons is outlined. We discuss ground-state hyperons as diagnostic tools to study non-perturbative aspects of the strong interaction, and fundamental symmetries. New simulation studies have been carried out for two benchmark hyperon-antihyperon production channels: p¯ p→ Λ¯ Λ and p¯ p→ Ξ¯ +Ξ-. The results, presented in detail in this paper, show that hyperon-antihyperon pairs from these reactions can be exclusively reconstructed with high efficiency and very low background contamination. In addition, the polarisation and spin correlations have been studied, exploiting the weak, self-analysing decay of hyperons and antihyperons. Two independent approaches to the finite efficiency have been applied and evaluated: one standard multidimensional efficiency correction approach, and one efficiency independent approach. The applicability of the latter was thoroughly evaluated for all channels, beam momenta and observables. The standard method yields good results in all cases, and shows that spin observables can be studied with high precision and accuracy already in the first phase of data taking with PANDA.
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Gan, Z., et al.
(author)
-
Ultraviolet Photoluminescence of Carbon Nanospheres and its Surface Plasmon-Induced Enhancement
- 2018
-
In: Small. - : Wiley-VCH Verlagsgesellschaft. - 1613-6810 .- 1613-6829. ; 14:16
-
Journal article (peer-reviewed)abstract
- Ultraviolet (UV) light can be used in versatile applications ranging from photoelectronic devices to biomedical imaging. In the development of new UV light sources, in this study, stable UV emission at ≈350 nm is unprecedentedly obtained from carbon nanospheres (CNSs). The origin of the UV fluorescence is comprehensively investigated via various characterization methods, including Raman and Fourier transform infrared analyses, with comparison to the visible emission of carbon nanodots. Based on the density functional calculations, the UV fluorescence is assigned to the carbon nanostructures bonded to bridging O atoms and dangling –OH groups. Moreover, a twofold enhancement in the UV emission is acquired for Au-carbon core-shell nanospheres (Au-CNSs). This remarkable modification of the UV emission is primarily ascribed to charge transfer between the CNSs and the Au surface.
|
|
| 19. |
- He, L., et al.
(author)
-
Biomass valorization toward sustainable asphalt pavements : Progress and prospects
- 2023
-
In: Waste Management. - : Elsevier. - 0956-053X .- 1879-2456. ; 165, s. 159-178
-
Journal article (peer-reviewed)abstract
- To cope with the global climate crisis and assist in achieving the carbon neutrality, the use of biomass materials to fully or partially replace petroleum-based products and unrenewable resources is expected to become a widespread solution. Based on the analysis of the existing literature, this paper firstly classified biomass materials with potential application prospects in pavement engineering according to their application and summarized their respective preparation methods and characteristics. The pavement performance of asphalt mixtures with biomass materials was analyzed and summarized, and the economic and environmental benefits of bio-asphalt binder were evaluated. The analysis shows that pavement biomass materials with potential for practical application can be divided into three categories: bio-oil, bio-fiber, and bio-filler. Adding bio-oil to modify or extend the virgin asphalt binder can mostly improve the low temperature performance of asphalt binder. Adding styrene-butadienestyrene (SBS) or other preferable bio-components for composite modification will have a further improved effect. Most of the asphalt mixtures prepared by using bio-oil modified asphalt binders have improved the low temperature crack resistance and fatigue resistance of asphalt mixtures, but the high temperature stability and moisture resistance may decrease. As a rejuvenator, most bio-oils can restore the high and low temperature performance of aged asphalt and recycled asphalt mixture, and improve fatigue resistance. Adding bio-fiber could significantly improve the high temperature stability, low temperature crack resistance and moisture resistance of asphalt mixtures. Biochar as a bio-filler can slow down the asphalt aging process and some other bio-fillers can improve the high temperature stability and fatigue resistance of asphalt binders. Through calculation, it is found that the cost performance of bio-asphalt has the ability to surpass conventional asphalt and has economic benefits. The use of biomass materials for pavements not only reduces pollutants, but also reduces the dependence on petroleum-based products. It has significant environmental benefits and development potential.
|
|
| 20. |
- Luan, H. B., et al.
(author)
-
CFD analysis of two types of welded plate heat exchangers
- 2017
-
In: Numerical Heat Transfer; Part A: Applications. - : Informa UK Limited. - 1040-7782 .- 1521-0634. ; 71:3, s. 250-269
-
Journal article (peer-reviewed)abstract
- A numerical and experimental study has been carried out on the heat transfer and fluid flow in two types of welded plate heat exchangers (PHEs). A new approach providing a proper clearance between two adjacent corrugated plates is proposed to improve the mesh quality around the contact points. The clearance value and the influence on the mesh quality and computational results are carefully studied. The results show that a relative clearance of 0.02 is proper. The computational fluid dynamics (CFD) results agree with the experimental results with a deviation of 15%. The proposed approach is proved effective and practical because it can increase the grid quality without losing the accuracy of the results. This paper shows that CFD is a reliable tool for studying the effects of various geometrical configurations on the optimum design of a PHE.
|
|
