| 11. |
- Bini, Kim, 1987, et al.
(författare)
-
Alcohol-Soluble Conjugated Polymers as Cathode Interlayers for All-Polymer Solar Cells
- 2018
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 1:5, s. 2176-2182
-
Tidskriftsartikel (refereegranskat)abstract
- Conjugated polymers with polar side-chain components have successfully been used as cathode interfacial materials (CIMs) to improve the performances of polymer solar cells with fullerenes as acceptors. However, their uses and functions in all-polymer solar cells (all-PSCs) have not been well-investigated. Therefore, in this work, four conjugated polymers bearing different functional side chains, including dimethylamine, diethanolamine, and imidazole, were used as CIMs to study their effects on all-PSCs. With a combination of high-performing acceptor and donor polymers as active layers, the performances of the devices based on the four CIMs were compared with conventional devices with LiF/Al and Al as cathode. Compared to the devices with only Al as cathode, the devices comprising conjugated polymers as CIMs presented large improvement in power conversion efficiency from 2.7% to around 5.3%, which is comparable to the devices with LiF/Al as cathode. The encouraging results demonstrated that the use of conjugated interfacial polymers is a robust way to improve the performances of all-PSCs and can elegantly circumvent the use of low work function metals as cathodes. This is very important for roll-to-roll processing of flexible and large-scale solar cells.
|
|
| 12. |
- Bini, Kim, 1987, et al.
(författare)
-
Synthesis and Characterization of Isoindigo-Based Polymers with Thermocleavable Side Chains
- 2018
-
Ingår i: Macromolecular Chemistry and Physics. - : Wiley. - 1022-1352 .- 1521-3935. ; 219:7
-
Tidskriftsartikel (refereegranskat)abstract
- Stability of bulk heterojunction films for organic solar cells is a critical factor for commercial viability. One method to stabilize these films is to include cleavable side chains, which reduce the solubility of the polymers when removed. In order to study the stabilizing effect of cleavable side chains, a series of random copolymers using isoindigo with 0, 10, 20, 50, and 100% thermally cleavable side chains based on the tert-butyloxycarbonyl (t-BOC) group are synthesized. The polymers show a distinct one-step thermal cleavage of the side chains, with no separable dealkylation and decarboxylation steps. The thermal stability in film is studied with transmission electron microscopy and atomic force microscopy. The polymer with all t-BOC side chains on isoindigo significantly improves thermal stability with regard to crystal growth and phase separation in film. These results suggest BOC-substitution can be used for large scale processing to produce insoluble polymer films with a high degree of thermal stability.
|
|
| 13. |
- Bo, Lin, et al.
(författare)
-
Bearing Fault Diagnosis Based on Subband Time-Frequency Texture Tensor
- 2019
-
Ingår i: IEEE Access. - : IEEE. - 2169-3536. ; 7, s. 37611-37619
-
Tidskriftsartikel (refereegranskat)abstract
- The texture feature tensor established from a subband time–frequency image (TFI) was extracted and used to identify the fault states of a rolling bearing. The TFI of adaptive optimal-kernel distribution was optimally partitioned into TFI blocks based on the minimum frequency band entropy. The texture features were extracted from the co-occurrence matrix of each TFI block. Based on the order of the segmented frequency bands, the texture feature tensor was constructed using the multidimensional feature vectors from all the blocks; this preserved the inherent characteristic of the TFI structure and avoided the information loss caused by vectorizing multidimensional features. The linear support higher order tensor machine based on the feature tensor was applied to identify the fault states of the rolling bearing.
|
|
| 14. |
- Cai, C. S., et al.
(författare)
-
Polymer solar cells spray coated with non-halogenated solvents
- 2017
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248. ; 161, s. 52-61
-
Tidskriftsartikel (refereegranskat)abstract
- Using spray-coating technique, we successfully fabricated conventional ITO-based and inverted ITO-free polymer solar cells (PSCs) based on a conjugated polymer poly[2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) as the donor and [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) or [6,6] -phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor. Environment-friendly non-halogenated solvents were used to process the active layers. The influence of substrate temperatures and processing solvents on the photovoltaic performance of the ITO-based TQ1:PC61BM PSCs was systemically investigated. A higher substrate temperature can accelerate the solvent evaporating rate and afford a micro-textured rougher surface, which efficiently reduced light reflectance and enhanced absorption. Furthermore, finer phase separation was observed when using this high substrate temperature, which led to enhanced photocurrent due to the reduced bimolecular recombination. The device performance of spray-processed PSCs using the non-halogenated solvent mixtures was comparable to that of spray-processed PSCs using the halogenated o-dichlorobenzene (oDCB), which demonstrates that the non-halogenated solvents are very promising in spray-processed PSCs. This work sheds new light on developing efficient roll-to-roll compatible spray-coated PSCs with environment-friendly solvents.
|
|
| 15. |
- Cai, P., et al.
(författare)
-
Effects of including electron-withdrawing atoms on the physical and photovoltaic properties of indacenodithieno 3,2-b thiophene-based donor-acceptor polymers: towards an acceptor design for efficient polymer solar cells
- 2017
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 7:33, s. 20440-20450
-
Tidskriftsartikel (refereegranskat)abstract
- Three new D-A polymers PIDTT-DTBO, PIDTT-DTBT and PIDTT-DTFBT, using indacenodithieno[3,2-b] thiophene (IDTT) as the electron-rich unit and benzoxadiazole (BO), benzodiathiazole (BT) or difluorobenzothiadiazole (FBT) as the electron-deficient unit, were synthesized via a Pd-catalyzed Stille polymerization. The included electron-withdrawing atoms of the acceptor portion were varied between O, S, and F for tailoring the optical and electrochemical properties and the geometry of structures. Their effects on the film topography, photovoltaic and hole-transporting properties of the polymers were thoroughly investigated via a range of techniques. As expected, the stronger electron-withdrawing BO unit affords red-shifted absorption, low-lying HOMO and LUMO levels for the polymer PIDTT-DTBO. However, it depicts lower hole mobility and a less efficient charge collection in the active layer compared to the polymer PIDTT-DTBT. In addition, degradation of the solubility is observed in the fluorinated polymer PIDTT-DTFBT. As a result, a BHJ PSC (ITO/PEDOT: PSS/polymer: PC71BM/interlayer/ Al) fabricated with PIDTT-DTBT attains the best power conversion efficiency (PCE) of 4.91%. These results thus demonstrate the potential effects of electronegative atoms on IDTT-based polymers and the structure-function correlations of such electron-donor materials for efficient PSCs.
|
|
| 16. |
- Chen, W., et al.
(författare)
-
Enhanced efficiency of polymer solar cells by improving molecular aggregation and broadening the absorption spectra
- 2019
-
Ingår i: Dyes and Pigments. - : Elsevier BV. - 0143-7208 .- 1873-3743. ; 166, s. 42-48
-
Tidskriftsartikel (refereegranskat)abstract
- Alkylthio-substituted thiophene-based benzo[1,2-b:4,5-b’]dithiophene (BDT) was used to construct PBDTS-DTBT, a medium band gap donor-acceptor (D-A) polymer with 5,6-difluoro-4,7-bis[4-(2-octyldodecyl)thiophene-2-yl]benzo[c] [1,2,5]thiadiazole (DTBT). The incorporation of sulfur atoms into the side chains not only lowered the highest occupied molecular orbital (HOMO) energy level but also improved molecular aggregation and thus afforded lower band gap (1.68 eV) with full width at half maximum (FWHM) of 170 nm in comparison to that of the analogous polymer (PBDT-DTBT) without sulfur atoms in side chains. Therefore, the bulk heterojunction polymer solar cells based on PBDTS-DTBT with 2% diiodooctane (DIO) as processing additive showed a high power conversion efficiency (PCE) of 9.73% with high open-circuit voltage (V OC , 0.93 V), large short-circuit current density (J SC , 14.23 mA/cm 2 ) and high fill factor (FF, 0.735).
|
|
| 17. |
- Chen, Wen, 1988, et al.
(författare)
-
VLBI Astrometry of radio stars to link radio and optical celestial reference frames. I. HD 199178 & AR Lacertae
- 2023
-
Ingår i: Monthly Notices of the Royal Astronomical Society. - 0035-8711 .- 1365-2966. ; 524:4, s. 5357-5367
-
Tidskriftsartikel (refereegranskat)abstract
- To accurately link the radio and optical Celestial Reference Frames (CRFs) at optical bright end, i.e. with GaiaG-band magnitude ≾13, increasing number and improving sky distribution of radio stars with accurate astrometric parameters from both Very Long Baseline Interferometry (VLBI) and Gaia measurements are mandatory. We selected two radio stars HD 199178 and AR Lacertae as the target for a pilot program for the frame link, using the Very Long Baseline Array at 15 GHz at six epochs spanning about 1 yr, to measure their astrometric parameters. The measured parallax of HD 199178 is 8.949 ± 0.059 mas and the proper motion is μαcos δ = 26.393 ± 0.093 and μδ = −0.950 ± 0.083 mas yr−1, while the parallax of AR Lac is 23.459 ± 0.094 mas and the proper motion is μαcos δ = −51.906 ± 0.138 and μδ = 46.732 ± 0.131 mas yr−1. Our VLBI measured astrometric parameters have accuracies about 4–5 times better than the corresponding historic VLBI measurements and comparable accuracies with those from Gaia, validating the feasibility of frame link using radio stars. With the updated astrometric parameters for these two stars, there is a ∼25 per cent reduction of the uncertainties on the Y-axis for both orientation and spin parameters.
|
|
| 18. |
- Chen, Xin, 1980, et al.
(författare)
-
Improved resource allocation strategy in SU-CoMP network
- 2011
-
Ingår i: The Journal of China Universities of Posts and Telecommunications. - 2210-5123. ; 18:4, s. 7-12
-
Tidskriftsartikel (refereegranskat)abstract
- Coordinated Multi-Point transmission and reception (CoMP) for single user, named as SU-CoMP, is considered as an efficient approach tomitigate inter-cell interference in Orthogonal Frequency Division Multiple Access (OFDMA) systems. Two prevalent approaches in SU-CoMP areCoordinated Scheduling (CS) and Joint Processing (JP). Although JP in SU-CoMP has been proved to achieve a great link performanceimprovement for the cell-edge user, efficient Resource Allocation (RA) on the system level is quite needed. However, so far limited work has beendone considering JP, and most existing schemes achieved the improvement of cell-edge performance at cost of the cell-average performancedegradation compared to the single cell RA. In this paper, a two-phase strategy is proposed for SU-CoMP networks. CS and JP are combined toimprove both cell-edge and cell-average performance. Compared to the single cell RA, simulation results demonstrate that, the proposed strategyleads to both higher cell-average and cell-edge throughput.
|
|
| 19. |
- Chen, Xin, 1980, et al.
(författare)
-
Optimal and Efficient Power Allocation for OFDM Non-Coherent Cooperative Transmission
- 2012
-
Ingår i: IEEE Wireless Communications and Networking Conference, WCNC. - 1525-3511. - 9781467304375 ; , s. 1584-1589
-
Konferensbidrag (refereegranskat)abstract
- In this paper, we study the subchannel (SC) power allocation for orthogonal frequency division multiplexing (OFDM) multiple access points (APs) systems with non-coherent cooperative transmission. The objective is to maximize the total capacity under per-AP power constraints. It can be proved that the optimal solution can be obtained by the combination of an optimal SC partition search and the power allocation across SCs for each feasible partition. Existing work exhaustively searched the optimal SC partition and used Lagrange dual method to compute the power allocation across SCs. Since the entire complexity increases exponentially with the number of SCs, the existing method is unsuitable for practical implementation. In this paper, we propose a novel optimal power allocation algorithm for non-coherent cooperative transmission with a much lower complexity. Firstly, a concept of “cut-off SC” is proposed for searching the optimal SC partition. Then, an efficient optimal power allocation algorithm across SCs is proposed for any given cut-off SC. Simulation results demonstrate that the proposed algorithm is optimal with a polynomial complexity, and ends within an acceptable number of iterations.
|
|
| 20. |
- de las Fuentes, Lisa, et al.
(författare)
-
Gene-educational attainment interactions in a multi-ancestry genome-wide meta-analysis identify novel blood pressure loci
- 2021
-
Ingår i: Molecular Psychiatry. - : Springer Nature. - 1359-4184 .- 1476-5578. ; 26:6, s. 2111-2125
-
Tidskriftsartikel (refereegranskat)abstract
- Educational attainment is widely used as a surrogate for socioeconomic status (SES). Low SES is a risk factor for hypertension and high blood pressure (BP). To identify novel BP loci, we performed multi-ancestry meta-analyses accounting for gene-educational attainment interactions using two variables, “Some College” (yes/no) and “Graduated College” (yes/no). Interactions were evaluated using both a 1 degree of freedom (DF) interaction term and a 2DF joint test of genetic and interaction effects. Analyses were performed for systolic BP, diastolic BP, mean arterial pressure, and pulse pressure. We pursued genome-wide interrogation in Stage 1 studies (N = 117 438) and follow-up on promising variants in Stage 2 studies (N = 293 787) in five ancestry groups. Through combined meta-analyses of Stages 1 and 2, we identified 84 known and 18 novel BP loci at genome-wide significance level (P < 5 × 10-8). Two novel loci were identified based on the 1DF test of interaction with educational attainment, while the remaining 16 loci were identified through the 2DF joint test of genetic and interaction effects. Ten novel loci were identified in individuals of African ancestry. Several novel loci show strong biological plausibility since they involve physiologic systems implicated in BP regulation. They include genes involved in the central nervous system-adrenal signaling axis (ZDHHC17, CADPS, PIK3C2G), vascular structure and function (GNB3, CDON), and renal function (HAS2 and HAS2-AS1, SLIT3). Collectively, these findings suggest a role of educational attainment or SES in further dissection of the genetic architecture of BP.
|
|
