| 1. |
- Jing, Yujia, 1985
(författare)
-
Hyperthermia-responsive liposomal systems
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Abstract Sophisticated liposomal systems are emerging at an increasing rate to meet the demands for multifunctional drug carriers in chemotherapies in combined with hyperthermia. For example, liposomal drug carriers for temperature-controlled drug release under hyperthermic conditions have recently been tested in clinical trials. More advanced designs of liposomes are expected to release encapsulated contents and activate hidden surface-functions in response to heat stimulus. Towards this aim, the present thesis is focused on formulating asymmetric lipid systems that can preserve functional moieties, and reactivate the targeted function as well as release the encapsulated compounds upon local heating. The design of the asymmetric liposomal systems utilizes the heat-activated transmembrane lipid diffusion during gel to liquid-crystalline phase transitions of the lipid membranes.Rational design of advanced liposomal drug-delivery systems will require understanding of the physicochemical properties of lipid membranes under, e.g., hyperthermic conditions. Here, supported lipid membranes on planar solid surfaces were used for model studies of lipid composition yielding a gel to liquid crystalline phase-transition temperature in the range 40 – 45 °C. It was found that the liposome-to-membrane formation process is not only size-dependent but also governed by temperature. Two methods of preparing supported asymmetric lipid membranes were investigated. As a proof-of-concept, the upper leaflets were either replaced or chemically transformed by enzymatic hydrolysis. The processes were monitored using surface sensitive techniques such as quartz crystal microbalance with dissipation (QCM-D) and dual polarization interferometry (DPI). The asymmetric structures were stable at a room temperature, while lipid flip-flop was induced upon increasing of the temperature. Transmembrane lipid exchange in the asymmetric structure under hyperthermic conditions was demonstrated by detecting, through streptavidin binding, biotinylated lipids appearing at the top leaflet which were first located in the lower leaflet. The protocols developed for the supported lipid systems were adapted for the preparation of asymmetric liposomes. Biotinylated asymmetric liposomes were used as a model system to demonstrate the principle of heat-activated targeting of asymmetric liposomes to streptavidin-coated surfaces. More biologically relevant interaction was utilized to replace the biotin-streptavidin function, where asymmetric cationic liposomes were binding to anionic supported membrane immobilized surfaces upon heating. The described strategies for assembly of asymmetric supported membranes provide a guide to the development of multifunctional drug carriers. The protocols used in experiments with supported membranes were readily adapted to the preparation of asymmetric liposomes. The ongoing study tests the asymmetric liposomes in vitro, which is designed to demonstrate hyperthermia treatment can enhance accumulation of liposomes in FaDu cells, and at the same time activate release of the encapsulated components. The results of in vitro tests can be used to analyze the feasibility of utilizing the asymmetric liposomes as a platform in vivo to explore further improvement in their functions upon microwave hyperthermia.
|
|
| 2. |
- Orru, Anna Maria, 1976, et al.
(författare)
-
AHA! festival 2015
- 2015
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The AHA festival investigates the borders between art and science in a three-day event at the Chalmers University of Technology hosted by the Department of Architecture. An international festival intended to provide enlightening experiences, staging surprises, new thoughts and displaced perspectives that lead to alternative modes of thinking about the space between art and science. We invite scientists (physicists, historians, mathematicians, medical students), artists (dancers, musicians, painters, poets, chefs) and not least architects, who reside in these borderlands and wish to share their vision and work. The key intention is to celebrate both art and science as key knowledge building devices.
|
|
| 3. |
|
|
| 4. |
- Calon, Tim, et al.
(författare)
-
Multimodal analysis of the tissue response to a bone-anchored hearing implant. : 11.Calon TGA, Johansson ML, Omar O, Shah FA, Budding D, Trobos M, Thomsen P, Stokroos RJ, Palmquist
- 2019
-
Ingår i: 2nd Politzer Society Meeting/2nd World Congress of Otology, 28 May - 1 June, 2019, Warsaw, Poland..
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 5. |
- Shah, Furqan A., et al.
(författare)
-
Bioactive glass and glass-ceramic scaffolds for bone tissue engineering
- 2018
-
Ingår i: Bioactive Glasses (Second Edition). - 9780081009369 ; , s. 201-33
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Bioactive glasses and glass-ceramics are a diverse group of materials possessing a unique set of physicochemical properties that make them useful for bone repair. Scaffolds for bone tissue engineering are subject to many requirements including biocompatibility, osteogenesis, biodegradability, and mechanical competence, all of which must be considered in the design features. This chapter addresses various scaffold fabrication techniques for melt-derived and sol-gel-derived compositions, polymer-based organic-inorganic composites, calcium phosphate-based inorganic-inorganic composites, bioactive bone cements, scaffolds based on glass compositions containing specific therapeutic ions, and hybrid materials where the organic and inorganic phases interact at the molecular level. The most important achievements, challenges and potential solutions, as well as the most promising areas of future research involving bioactive glasses and glass-ceramics for bone tissue engineering are presented.
|
|
| 6. |
- Halling Linder, Cecilia, 1975-
(författare)
-
Biochemical and functional properties of mammalian bone alkaline phosphatase isoforms during osteogenesis
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The human skeleton is a living and dynamic tissue that constantly is being renewed in a process called bone remodeling. Old bone is resorbed by osteoclasts and new bone is formed by osteoblasts. Bone is a composite material made up by mineral crystals in the form of hydroxyapatite (calcium and phosphate) that provides the hardness of bone, and collagen fibrils that provides elasticity and flexibility. Alkaline phosphatase (ALP) is a family of enzymes that is present in most species and catalyzes the hydrolysis of various phosphomonoesters at alkaline pH. Despite the generalized use of ALP as a biochemical marker of bone formation, the precise function of bone ALP (BALP) is only now becoming clear. Three circulating human BALP isoforms (B1, B2, and B/I) can be distinguished in healthy individuals and a fourth isoform (B1x) has been discovered in patients with chronic kidney disease and in bone tissue.Paper I. Three endogenous phosphocompounds, (i.e., inorganic pyrophosphate (PPi), pyridoxal 5′-phosphate (PLP) and phosphoethanolamine (PEA)), have been suggested to serve as physiological substrates for BALP. The BALP isoforms display different catalytic properties towards PPi and PLP, which is attributed to their distinct N-linked glycosylation patterns. The catalytic activity, using PEA as substrate, was barely detectable for all BALP isoforms indicating that PEA is not a physiological substrate for BALP.Paper II. Mouse serum ALP is frequently measured and interpreted in mammalian bone research. However, little is known about the circulating ALPs in mice and their relation to human ALP. We characterized the circulating and tissue-derived mouse ALP isozymes and isoforms from mixed strains of wild-type and knockout mice. All four BALP isoforms (B/I, B1x, B1, and B2) were identified in mouse serum and bone tissues, in good correspondence with those found in human bones. All mouse tissues, except liver, contained significant ALP activities. This is a notable difference as human liver contains vast amounts of ALP.Paper III. The objective of this study was to investigate the binding properties of human collagen type I to human BALP, including the two BALP isoforms B1 and B2, together with ALP from human liver, human placenta and E. coli. A surface plasmon resonance-based analysis showed that BALP binds stronger to collagen type I in comparison with ALPs expressed in non-mineralizing tissues. The B2 isoform binds significantly stronger to collagen type I in comparison with the B1 isoform, indicating that glycosylation differences in human ALPs are of crucial importance for protein–protein interactions with collagen type I.Paper IV. Tartrate-resistant acid phosphatase (TRAP) is highly expressed in osteoclasts and frequently used as a marker of bone resorption. Intriguingly, recent studies show that TRAP is also expressed in osteoblasts and osteocytes. TRAP displays enzymatic activity towards the endogenous substrates for BALP, i.e., PPi and PLP. Both TRAP and BALP can alleviate the inhibitory effect of osteopontin on mineralization by dephosphorylation, which suggests a novel role for TRAP in skeletal mineralization.
|
|
| 7. |
- Andersson, Marlene, et al.
(författare)
-
Biomimetic spinning of artificial spider silk from a chimeric minispidroin
- 2017
-
Ingår i: Nature Chemical Biology. - : Springer Science and Business Media LLC. - 1552-4450 .- 1552-4469. ; 254
-
Tidskriftsartikel (refereegranskat)abstract
- Herein we present a chimeric recombinant spider silk protein (spidroin) whose aqueous solubility equals that of native spider silk dope and a spinning device that is based solely on aqueous buffers, shear forces and lowered pH. The process recapitulates the complex molecular mechanisms that dictate native spider silk spinning and is highly efficient; spidroin from one liter of bacterial shake-flask culture is enough to spin a kilometer of the hitherto toughest as-spun artificial spider silk fiber.
|
|
| 8. |
- Apelgren, Peter, et al.
(författare)
-
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo.
- 2017
-
Ingår i: PloS one. - : Public Library of Science (PLoS). - 1932-6203. ; 12:12
-
Tidskriftsartikel (refereegranskat)abstract
- Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.
|
|
| 9. |
- Barreto Henriksson, Helena, et al.
(författare)
-
Determination of mechanical and rheological properties of a cell-loaded peptide gel during ECM production
- 2019
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 563, s. 437-444
-
Tidskriftsartikel (refereegranskat)abstract
- The development of an injectable biomaterial that supports cell survival and maintains or promotes nucleus pulposus (NP) phenotype could aid delivery of cells to degenerated NPs causing low back pain. Mesenchymal cells were loaded and grown in a synthetic peptide gel, PuraMatrix (R). Cells were observed within the gels over 0-28 days, and accumulation of glycosaminoglycans were detected by histological staining. The mechanical properties of the cell-loaded constructs, and the change of the mechanical properties were studied using stress relaxation of the gels under compression and confinement. The PuraMatrix (R) gel was shown to relax fast on compression indicating that the fluid could easily flow out of the gel, and thus indicating the presence of large pores/voids. The presence of these pores/voids was further supported by high mobility of dextran molecules, determined using fluorescence recovery after photo bleaching. The stress required to deform the cell-loaded constructs to a specific strain increases at day 21, at which point the presence of glycosaminoglycans within the cell-loaded constructs was also observed. The results provide evidence of changes in mechanical properties of the PuraMatrix (R) matrix upon excretion of the extracellular matrix by the cells.
|
|
| 10. |
- Fursatz, Marian, et al.
(författare)
-
Functionalization of bacterial cellulose wound dressings with the antimicrobial peptide ε-poly-L-Lysine
- 2018
-
Ingår i: Biomedical Materials. - : Institute of Physics Publishing (IOPP). - 1748-6041 .- 1748-605X. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- Wound dressings based on bacterial cellulose (BC) can form a soft and conformable protective layer that can stimulate wound healing while preventing bacteria from entering the wound. Bacteria already present in the wound can, however, thrive in the moist environment created by the BC dressing which can aggravate the healing process. Possibilities to render the BC antimicrobial without affecting the beneficial structural and mechanical properties of the material would hence be highly attractive. Here we present methods for functionalization of BC with ε-Poly-L-Lysine (ε-PLL), a non-toxic biopolymer with broad-spectrum antimicrobial activity. Low molecular weight ε-PLL was cross-linked in pristine BC membranes and to carboxymethyl cellulose (CMC) functionalized BC using carbodiimide chemistry. The functionalization of BC with ε-PLL inhibited growth of S. epidermidis on the membranes but did not affect the cytocompatibility to cultured human fibroblasts as compared to native BC. The functionalization had no significant effects on the nanofibrous structure and mechanical properties of the BC. The possibility to functionalize BC with ε-PLL is a promising, green and versatile approach to improve the performance of BC in wound care and other biomedical applications.
|
|
