| 1. |
- Akhmadaliev, S., et al.
(författare)
-
Hadron energy reconstruction for the ATLAS calorimetry in the framework of the non-parametrical method
- 2002
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 480:03-feb, s. 508-523
-
Tidskriftsartikel (refereegranskat)abstract
- This paper discusses hadron energy reconstruction for the ATLAS barrel prototype combined calorimeter (consisting of a lead-liquid argon electromagnetic part and an iron-scintillator hadronic part) in the framework of the non-parametrical method. The non-parametrical method utilizes only the known e/h ratios and the electron calibration constants and does not require the determination of any parameters by a minimization technique. Thus, this technique lends itself to an easy use in a first level trigger. The reconstructed mean values of the hadron energies are within +/-1% of the true values and the fractional energy resolution is [(58+/-3)%/rootE+(2.5+/-0.3)%]circle plus(1.7+/-0.2)/E. The value of the e/h ratio obtained for the electromagnetic compartment of the combined calorimeter is 1.74+/-0.04 and agrees with the prediction that e/h > 1.66 for this electromagnetic calorimeter. Results of a study of the longitudinal hadronic shower development are also presented. The data have been taken in the H8 beam line of the CERN SPS using pions of energies from 10 to 300 GeV.
|
|
| 2. |
- Akhmadaliev, S., et al.
(författare)
-
Results from a new combined test of an electromagnetic liquid argon calorimeter with a hadronic scintillating-tile calorimeter
- 2000
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 449:3, s. 461-477
-
Tidskriftsartikel (refereegranskat)abstract
- A new combined test of an electromagnetic liquid argon accordion calorimeter and a hadronic scintillating-tile calorimeter was carried out at the CERN SPS. These devices are prototypes of the barrel calorimeter of the future ATLAS experiment at the LHC. The energy resolution of pions in the energy range from 10 to 300 GeV at an incident angle a of about 12 degrees is well described by the expression sigma/E = ((41.9 +/- 1.6)%/root E + (1.8 +/- 0.1)%)circle plus(1.8 +/- 0.1)/E, where E is in GeV. The response to electrons and muons was evaluated. Shower profiles, shower leakage and the angular resolution of hadronic showers were also studied. Results are compared with those from the previous beam test.
|
|
| 3. |
- Andrieux, M. L., et al.
(författare)
-
Construction and test of the first two sectors of the ATLAS barrel liquid argon presampler
- 2002
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 479:03-feb, s. 316-333
-
Tidskriftsartikel (refereegranskat)abstract
- The electromagnetic (e.m.) calorimeter of the ATLAS experiment for the Large Hadron Collider will be a sampling liquid argon accordion calorimeter. To achieve sufficient energy resolution, it is necessary to correct for the energy loss in the material upstream of the calorimeter. For this purpose, a separate presampler detector fixed on the inner face of the e.m. calorimeter, in the same cryostat, is being built by the ATLAS collaboration. Two presampler sectors have already been built and tested in their final version. The geometry of the detector and the various steps of its construction are reviewed. The hardware performance of the detector measured both at CERN and at the ISN-Grenoble (specific test bench) is discussed. It is concluded that the presampler will adequately fulfill its role for future operation at the CERN Large Hadron Collider.
|
|
| 4. |
- Aubert, B., et al.
(författare)
-
Performance of the ATLAS electromagnetic calorimeter barrel module 0
- 2003
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 500:03-jan, s. 202-231
-
Tidskriftsartikel (refereegranskat)abstract
- The construction and performance of the barrel pre-series module 0 of the future ATLAS electromagnetic calorimeter at the LHC is described. The signal reconstruction and performance of ATLAS-like electronics has been studied. The signal to noise ratio for muons has been found to be 7.11 +/- 0.07. An energy resolution of better than 9.5% GeV1/2 / rootE (sampling term) has been obtained with electron beams of up to 245 GeV. The uniformity of the response to electrons in an area of Deltaeta x Deltaphi = 1.2 x 0.075 has been measured to be better than 0.8%.
|
|
| 5. |
- Aubert, B., et al.
(författare)
-
Performance of the ATLAS electromagnetic calorimeter end-cap module 0
- 2003
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 500:03-jan, s. 178-201
-
Tidskriftsartikel (refereegranskat)abstract
- The construction and beam test results of the ATLAS electromagnetic end-cap calorimeter pre-production module 0 are presented. The stochastic term of the energy resolution is between 10% and 12.5% GeV1/2 over the full pseudorapidity range. Position and angular resolutions are found to be in agreement with simulation. A global constant term of 0.6% is obtained in the pseudorapidity range 2.5 < η < 3.2 (inner wheel).
|
|
| 6. |
- Carlson, P., et al.
(författare)
-
Beyond the RICH : innovative photosensitive gaseous detectors for new fields of applications
- 2003
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 502:1, s. 189-194
-
Tidskriftsartikel (refereegranskat)abstract
- We have developed and successfully used several innovative designs of detectors with solid photocathodes. The main advantage of these detectors is that rather high gains (> 10(4)) can be achieved in a single multiplication step. This is possible by, for instance, exploiting the secondary electron multiplication and limiting the energy of the steamers by distributed resistivity. The single step approach also allows a very good position resolution to be achieved in some devices: 50 mum on line without applying any treatment method (like center of gravity). The main focus of our report is new fields of applications for these detectors and the optimization of their designs for such purposes.
|
|
| 7. |
- Carlson, P., et al.
(författare)
-
Gaseous photomultipliers with solid photocathodes for the detection of sparks, flames and dangerous gases
- 2003
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 505:02-jan, s. 207-210
-
Tidskriftsartikel (refereegranskat)abstract
- In many applications, it is necessary to detect sparks or flames in daylight conditions or in illuminated areas. Most flames emit strongly in the ultraviolet spectrum (180-280 nm), and this property can be used for reliable identification of flames. We have developed new spark and flame detectors based on gaseous photomultipliers with CsI, CuI or CsTe photocathodes. A modified version of the detector can also detect smoke and dangerous vapors. These detectors are able to perform complex monitoring and detection functions. Some of their advantages are: low cost, high sensitivity, large output signal and operation under battery power. Gaseous photomultipliers can be position sensitive and, if necessary, be used in combination with various optical systems, for example for monitoring flames from space.
|
|
| 8. |
- Charlton, D. G., et al.
(författare)
-
System tests of radiation hard optical links for the ATLAS semiconductor tracker
- 2000
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - 0168-9002 .- 1872-9576. ; 443:03-feb, s. 430-446
-
Tidskriftsartikel (refereegranskat)abstract
- A prototype optical data and Timing Trigger and Control transmission system based on LEDs and PIN-diodes has been constructed. The system would be suitable in terms of radiation hardness and radiation length for use in the ATLAS SemiConductor Tracker. Bit error rate measurements were performed for the data links and for the links distributing the Timing, Trigger and Control data from the counting room to the front-end modules. The effects of cross-talk between the emitters and receivers were investigated. The advantages of using Vertical Cavity Surface Emitting Lasers (VCSELs) instead of LEDs are discussed.
|
|
| 9. |
- Ersmark, Tore, et al.
(författare)
-
Status of the DESIRE project : Geant4 physics validation studies and first results from columbus/ISS radiation simulations
- 2004
-
Ingår i: IEEE NUCLEAR SCIENCE SYMPOSIUM, CONFERENCE RECORD. ; , s. 1540-1544
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The DESIRE (Dose Estimation by Simulation of the ISS Radiation Environment) project aimes to accurately calculate radiation fluxes and doses to astronauts inside the European Columbus module of the International Space Station using Geant4. Firstly physics benchmark studies have been performed and comparisons made to experimental data and other particle transport programs. This will be followed by a detailed evaluation of the incident radiation fields on the ISS and culminate with the geometry modelling and full-scale flux and dose simulations for the Columbus. Geant4 validation studies are presented here. These concern the angle and energy distribution of particles leaving irradiated targets and of energy depositions in the targets. Comparisons are made between simulations using different Geant4 physics models, experimental data and other particle transport programs. Geant4 using the "Binary Cascade" model for inelastic nucleon reactions performs very well in these comparisons but some issues with other models remain to be resolved if these models are to be used for space radiation shielding applications. Results of Geant4 simulations of the transport of relevant radiation field components through the hull of the Columbus/ISS are also presented.
|
|
| 10. |
- Ersmark, Tore, et al.
(författare)
-
Status of the DESIRE project : Geant4 physics validation studies and first results from columbus/ISS radiation simulations
- 2004
-
Ingår i: IEEE Transactions on Nuclear Science. - 0018-9499 .- 1558-1578. ; 51:4, s. 1378-1384
-
Tidskriftsartikel (refereegranskat)abstract
- The Dose Estimation by Simulation of the ISS Radiation Environment (DESIRE) project aims to accurately calculate radiation fluxes and doses to astronauts inside the European Columbus module of the International Space Station using Geant4. Since Geant4 has not been previously used for this type of application it needs to be validated. This will be followed by a detailed evaluation of the incident radiation fields on ISS and culminate with the geometry modeling and full-scale flux and dose simulations for Columbus. Geant4 validation studies and comparisons to other tools are presented. These concern the angle and energy distributions of particles leaving irradiated targets and of energy depositions in the targets. Comparisons are made between simulations using different Geant4 physics models, experimental data, and other particle transport programs. Geant4 using the Binary Cascade model for inelastic nucleon reactions performs very well in these comparisons, but some issues with other models remain to be resolved if they are to be used for space radiation shielding applications. Results of Geant4 simulations of the transport of some relevant radiation field components through the hull of a simplified model of Columbus are also presented.
|
|
