| 1. |
|
|
| 2. |
- Abdipour, Morteza, et al.
(författare)
-
A Design Research Lab—An Integrated Model to Identify Conscious and Unconscious Behavior in the Design Process
- 2016
-
Ingår i: Advances in Design for Inclusion. - Cham : Springer. - 9783319419619 - 9783319419626
-
Konferensbidrag (refereegranskat)abstract
- To understand how different design solutions affect users, designers traditionally use different evaluation methods that mainly rely on conscious feedback from the users. However, the complexity of human behaviour, where a large part is unconscious, point to a need for an extended tool box addressing the part not accessible to human conscious knowledge. Here, we describe a design research lab where traditional methods are complemented with tools to measure physiological signals influenced by emotional and sympathetic responses. These tools include galvanic skin response (GSR), electrocardiograph (ECG), and electroencephalograph (EEG). Typical sessions with acquired data of conscious and unconscious user reactions are described. The large body of data collected, which also require non-design expertise for interpretation, suggest that a further development towards simplified output data of the unconscious reactions is needed to allow wider use within industrial design work.
|
|
| 3. |
|
|
| 4. |
- Abulaiti, Yiming, et al.
(författare)
-
Search for the Standard Model Higgs boson produced by vector-boson fusion and decaying to bottom quarks in root s=8TeV pp collisions with the ATLAS detector
- 2016
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer. - 1126-6708 .- 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- A search with the ATLAS detector is presented for the Standard Model Higgs boson produced by vector-boson fusion and decaying to a pair of bottom quarks, using 20.2 fb(-1) of LHC proton-proton collision data at root s - 8 TeV. The signal is searched for as a resonance in the invariant mass distribution of a pair of jets containing b-hadrons in vector-boson-fusion candidate events. The yield is measured to be -0.8 +/- 2.3 times the Standard Model cross-section for a Higgs boson mass of 125 GeV. The upper limit on the cross-section times the branching ratio is found to be 4.4 times the Standard Model cross-section at the 95% confidence level, consistent with the expected limit value of 5.4 (5.7) in the background-only (Standard Model production) hypothesis.
|
|
| 5. |
- Afewerki, Samson, et al.
(författare)
-
Combinations of Aminocatalysts and Metal Catalysts : A Powerful Cooperative Approach in Selective Organic Synthesis
- 2016
-
Ingår i: Chemical Reviews. - : American Chemical Society (ACS). - 0009-2665 .- 1520-6890. ; 116:22, s. 13512-13570
-
Forskningsöversikt (refereegranskat)abstract
- The cooperation and interplay between organic and metal catalyst Arninocatalysis systems is of utmost importance in nature and chemical synthesis. Here innovative and selective cooperative catalyst systems can be designed by combining two catalysts that complement rather than inhibit one another. This refined strategy can permit chemical transformations unmanageable by either of the catalysts alone. This review summarizes innovations and developments in selective organic synthesis that have used cooperative dual catalysis by combining simple aminocatalysts with metal catalysts. Considerable efforts have been devoted to this fruitful field. This emerging area employs the different activation modes of amine and metal catalysts as a platform to address challenging reactions. Here, aminocatalysis (e.g., enamine activation catalysis, iminium activation catalysis, single occupied molecular orbital (SOMO) activation catalysis, and photoredox activation catalysis) is employed to activate unreactive carbonyl substrates. The transition metal catalyst complements by activating a variety of substrates through a range of interactions (e.g., electrophilic pi-allyl complex formation, Lewis acid activation, allenylidene complex formation, photoredox activation, C-H activation, etc.), and thereby novel concepts within catalysis are created. The inclusion of heterogeneous catalysis strategies allows for green chemistry development, catalyst recyclability, and the more eco-friendly synthesis of valuable compounds.
|
|
| 6. |
- Ahonen, Mikko, PhD, post-doc researcher, 1968-, et al.
(författare)
-
Voltage transients measurements and power line communication
- 2016
-
Ingår i: 2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON). - : IEEE. - 9781509037315 ; , s. 1-4
-
Konferensbidrag (refereegranskat)abstract
- Power line communication (PLC) connects energy producers with energy consumers. In the European Union stricter guidelines are under development to limit disturbances in the 2-150 kHz frequency range, because devices utilising PLC do not work. This study measured voltage transients in 22 locations and identified sources for noise. Home environments and public buildings were measured. Measurements were conducted in the frequency range of 150 kHz-500 kHz (according to EN 55011 to EN 55022) and in the lower frequency range of 3 kHz to 95 kHz. Results indicate that voltage transients are generated mostly by switching mode power supplies, pumps, rectifiers, inverters and even low quality smart meters. Several of these devices exceeded PLC standard level, 122 dBμV. Additionally we demonstrate that basic power quality recordings do not provide enough information to mitigate PLC problems occurring within microseconds and frequency specific voltage transient measurements are needed.
|
|
| 7. |
- Albani, Giorgia, et al.
(författare)
-
Evolution in boron-based GEM detectors for diffraction measurements : From planar to 3D converters
- 2016
-
Ingår i: Measurement science and technology. - : IOP Publishing. - 0957-0233 .- 1361-6501. ; 27:11
-
Tidskriftsartikel (refereegranskat)abstract
- The so-called '3He-crisis' has motivated the neutron detector community to undertake an intense R&D programme in order to develop technologies alternative to standard 3He tubes and suitable for neutron detection systems in future spallation sources such as the European spallation source (ESS). Boron-based GEM (gas electron multiplier) detectors are a promising '3He-free' technology for thermal neutron detection in neutron scattering experiments. In this paper the evolution of boron-based GEM detectors from planar to 3D converters with an application in diffraction measurements is presented. The use of 3D converters coupled with GEMs allows for an optimization of the detector performances. Three different detectors were used for diffraction measurements on the INES instrument at the ISIS spallation source. The performances of the GEM-detectors are compared with those of conventional 3He tubes installed on the INES instrument. The conceptual detector with the 3D converter used in this paper reached a count rate per unit area of about 25% relative to the currently installed 3He tube. Its timing resolution is similar and the signal-to-background ratio (S/B) is 2 times lower.
|
|
| 8. |
- Alimadadi, Majid, et al.
(författare)
-
3D-oriented fiber networks made by foam forming
- 2016
-
Ingår i: Cellulose. - : Springer Netherlands. - 0969-0239 .- 1572-882X. ; 23:1, s. 661-671
-
Tidskriftsartikel (refereegranskat)abstract
- In industrial applications, such as paper and nonwovens, cellulose fibers are used in the form of a network where the fibers are oriented more or less in the sheet-plane direction. However, in many biological systems, fibers are instead oriented in a three-dimensional (3D) space, creating a wide variety of functionalities. In this study we created a 3D-oriented fiber network on the laboratory scale and have identified some unique features of its structure and mechanical properties. The 3D fiber network sheets were prepared by using foam-forming as well as modifying consolidation and drying procedures. The fiber orientation and tensile/compression behavior were determined. The resulting sheets were extremely bulky (above 190 cm3/g) and had extremely low stiffness (or high softness) compared to the reference handsheets. Despite this high bulk, the sheets retained good structural integrity. We found that a 3D-oriented fiber network requires much less fiber-fiber contact to create a connected (“percolated”) network than a two-dimensionally oriented network. The compression behavior in the thickness direction was also unique, characterized by extreme compressibility because of its extreme bulk and a long initial increase in the compression load as well as high strain recovery after compression because of its fiber reorientation during compression.
|
|
| 9. |
- Allahgholi, A., et al.
(författare)
-
Front end ASIC for AGIPD, a high dynamic range fast detector for the European XFEL
- 2016
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- The Adaptive Gain Integrating Pixel Detector (AGIPD) is a hybrid pixel X-ray detector for the European-XFEL. One of the detector's important parts is the radiation tolerant front end ASIC fulfilling the European-XFEL requirements: high dynamic range-from sensitivity to single 12.5keV-photons up to 104 photons. It is implemented using the dynamic gain switching technique with three possible gains of the charge sensitive preamplifier. Each pixel can store up to 352 images in memory operated in random-access mode at >= 4.5MHz frame rate. An external vetoing may be applied to overwrite unwanted frames.
|
|
| 10. |
- Allahgholi, A., et al.
(författare)
-
The adaptive gain integrating pixel detector
- 2016
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 11:2
-
Tidskriftsartikel (refereegranskat)abstract
- The adaptive gain integrating pixel detector (AGIPD) is a development of a collaboration between Deustsches Elektronen-Synchrotron (DESY), the Paul-Scherrer-Institute (PSI), the University of Hamburg and the University of Bonn. The detector is designed to cope with the demanding challenges of the European XFEL. Therefore it comes along with an adaptive gain stage allowing a high dynamic range, spanning from single photon sensitivity to 10(4) x 12.4 keV photons and 352 analogue memory cells per pixel. The aim of this report is to briefly explain the concepts of the AGIPD electronics and mechanics and then present recent experiments demonstrating the functionality of its key features.
|
|
