| 1. |
|
|
| 2. |
- Andersson, M. G., et al.
(författare)
-
Separated by a common language : Awareness of term usage differences between languages and disciplines in biopreparedness
- 2013
-
Ingår i: Biosecurity and bioterrorism. - : Mary Ann Liebert Inc. - 1538-7135 .- 1557-850X. ; 11:SUPPL. 1, s. S276-S285
-
Tidskriftsartikel (refereegranskat)abstract
- Preparedness for bioterrorism is based on communication between people in organizations who are educated and trained in several disciplines, including law enforcement, health, and science. Various backgrounds, cultures, and vocabularies generate difficulties in understanding and interpretating terms and concepts, which may impair communication. This is especially true in emergency situations, in which the need for clarity and consistency is vital. The EU project AniBioThreat initiated methods and made a rough estimate of the terms and concepts that are crucial for an incident, and a pilot database with key terms and definitions has been constructed. Analysis of collected terms and sources has shown that many of the participating organizations use various international standards in their area of expertise. The same term often represents different concepts in the standards from different sectors, or, alternatively, different terms were used to represent the same or similar concepts. The use of conflicting terminology can be problematic for decision makers and communicators in planning and prevention or when handling an incident. Since the CBRN area has roots in multiple disciplines, each with its own evolving terminology, it may not be realistic to achieve unequivocal communication through a standardized vocabulary and joint definitions for words from common language. We suggest that a communication strategy should include awareness of alternative definitions and ontologies and the ability to talk and write without relying on the implicit knowledge underlying specialized jargon. Consequently, cross-disciplinary communication skills should be part of training of personnel in the CBRN field. In addition, a searchable repository of terms and definitions from relevant organizations and authorities would be a valuable addition to existing glossaries for improving awareness concerning bioterrorism prevention planning. © 2013, Mary Ann Liebert, Inc.
|
|
| 3. |
- Andersson, S., et al.
(författare)
-
Sulfur recirculation for increased electricity production in Waste-to-Energy plants
- 2014
-
Ingår i: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 34:1, s. 67-78
-
Tidskriftsartikel (refereegranskat)abstract
- Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Goteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop. The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO3 concentrations, which may otherwise induce low temperature corrosion. In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 degrees C and 525 degrees C) compared to the reference exposure. The corrosion rates were reduced by 60-90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 degrees C with sulfur recirculation in operation were similar or lower compared to those measured at 450 degrees C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.
|
|
| 4. |
- Bergman, Åke, et al.
(författare)
-
Science and policy on endocrine disrupters must not be mixed : a reply to a "common sense" intervention by toxicology journal editors
- 2013
-
Ingår i: Environmental Health. - : BioMed Central (BMC). - 1476-069X. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- The "common sense" intervention by toxicology journal editors regarding proposed European Union endocrine disrupter regulations ignores scientific evidence and well-established principles of chemical risk assessment. In this commentary, endocrine disrupter experts express their concerns about a recently published, and is in our considered opinion inaccurate and factually incorrect, editorial that has appeared in several journals in toxicology. Some of the shortcomings of the editorial are discussed in detail. We call for a better founded scientific debate which may help to overcome a polarisation of views detrimental to reaching a consensus about scientific foundations for endocrine disrupter regulation in the EU.
|
|
| 5. |
- Honkalampi-Hämäläinen, U., et al.
(författare)
-
Safety evaluation of food contact paper and board using chemical tests and in vitro bioassays : Role of known and unknown substances
- 2010
-
Ingår i: Food Additives and Contaminants. - : Informa UK Limited. - 0265-203X .- 1464-5122. ; 27:3, s. 406-115
-
Tidskriftsartikel (refereegranskat)abstract
- In vitro toxicological tests have been proposed as an approach to complement the chemical safety assessment of food contact materials, particularly those with a complex or unknown chemical composition such as paper and board. Among the concerns raised regarding the applicability of in vitro tests are the effects of interference of the extractables on the outcome of the cytotoxicity and genotoxicity tests applied and the role of known compounds present in chemically complex materials, such as paper and board, either as constituents or contaminants. To answer these questions, a series of experiments were performed to assess the role of natural substances (wood extracts, resin acids), some additives (diisopropylnaphthalene, phthalates, acrylamide, fluorescent whitening agents) and contaminants (2,4-diaminotoluene, benzo[a]pyrene) in the toxicological profile of paper and board. These substances were individually tested or used to spike actual paper and board extracts. The toxic concentrations of diisopropylnaphthalenes and phthalates were compared with those actually detected in paper and board extracts showing conspicuous toxicity. According to the results of the spiking experiments, the extracts did not affect the toxicity of tested chemicals nor was there any significant metabolic interference in the cases where two compounds were used in tests involving xenobiotic metabolism by the target cells. While the identified substances apparently have a role in the cytotoxicity of some of the project samples, their presence does not explain the total toxicological profile of the extracts. In conclusion, in vitro toxicological testing can have a role in the safety assessment of chemically complex materials in detecting potentially harmful activities not predictable by chemical analysis alone.
|
|
| 6. |
|
|
| 7. |
|
|
