| 1. |
- Andersen, S. J., et al.
(författare)
-
Quantifying variability of Large Eddy Simulations of very large wind farms
- 2015
-
Ingår i: Wake Conference 2015. - : IOP Publishing. ; , s. 012027-
-
Konferensbidrag (refereegranskat)abstract
- Large Eddy Simulations are inherently dynamic as the largest scales are resolved and the smallest scales are modeled temporally. This raises challenges for simulations including very large scales such as atmospheric flows, which require very long simulation times. Simple averages fail at capturing these dynamics and potentially yield misleading interpretations concerning the capabilities of different models when tested in blind tests or in benchmarking exercises such as Wakebench, where results from different flow models are compared. This article will present results from very large wind farm simulations using Actuator Disc (AD) and Line (AL) models for two different turbine spacings with turbulent inflow. The results of each numerical flow model include a certain variability, and it will be examined if different models result in comparable probability distributions.
|
|
| 2. |
- Eriksson, Ola, et al.
(författare)
-
Large-eddy simulations of wind farm production and long distance wakes
- 2015
-
Ingår i: WAKE CONFERENCE 2015. - : IOP Publishing.
-
Konferensbidrag (refereegranskat)abstract
- The future development of offshore wind power will include many wind farms built in the same areas. It is known that wind farms produce long distance wakes, which means that we will see more occasions of farm to farm interaction, namely one wind farm operating in the wake of another wind farm. This study investigates how to perform accurate power predictions on large wind farms and how to assess the long distance wakes generated by these farms. The focus of this paper is the production's and wake's sensitivity to the extension of the grid as well as the turbulence when using Large-eddy simulations (LES) with pregenerated Mann turbulence. The aim is to determine an optimal grid which minimizes blockage effects and ensures constant resolution in the entire wake region at the lowest computational cost. The simulations are first performed in the absence of wind turbines in order to assess how the atmospheric turbulence and wind profile are evolving downstream (up to 12,000 m behind the position where the turbulence is imposed). In the second step, 10 turbines are added in the domain (using an actuator disc method) and their production is analyzed alongside the mean velocities in the domain. The blockage effects are tested using grids with different vertical extents. An equidistant region is used in order to ensure high resolution in the wake region. The importance of covering the entire wake structure inside the equidistant region is analyzed by decreasing the size of this region. In this step, the importance of the lateral size of the Mann turbulence box is also analyzed. In the results it can be seen that the flow is acceptably preserved through the empty domain if a larger turbulence box is used. The relative production is increased (due to blockage effects) for the last turbines using a smaller vertical domain, increased for a lower or narrower equidistant region (due to the smearing of the wake in the stretched area) and decreased when using a smaller turbulence box (due to decreased inmixing) The long distance wake behind the row is most impacted by the use of a smaller turbulence box, while the other simulation setups have less influence on these results. In summary, the results show the importance of having relatively large extensions of the domain, large extensions of the equidistant region and especially large extensions of the turbulence box.
|
|
| 3. |
- Eriksson, Ola, 1979-
(författare)
-
Numerical Computations of Wakes Behind Wind Farms
- 2015
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- More and larger wind farms are planned offshore. As the most suitable build sites are limited wind farms will be constructed near to each other in so called wind farm clusters. Behind the wind turbines in these farms there is a disrupted flow of air called a wake that is characterized by reduced wind speed and increased turbulence. These individual turbine wakes combine to form a farm wake that can travel a long distance. In wind farm clusters farm to farm interaction will occur, i.e. the long distance wake from one wind farm will impact the wind conditions for other farms in the surrounding area.The thesis contains numerical studies of these long distance wakes. In this study Large Eddy Simulations (LES) using an Actuator Disc method (ACD) are used. A prescribed boundary layer is used where the wind shear is introduced using body forces. The turbulence, based on the Mann model, is introduced as fluctuating body forces upstream of the farm. A neutral atmosphere is assumed. The applied method has earlier been used for studies of wake effects inside farms but not for the longer distances needed for farm to farm interaction.Numerical studies are performed to get better knowledge about the use of this model for long distance wakes. The first study compares the simulation results with measurements behind an existing farm. Three parameter studies are thereafter setup to analyze how to best use the model. The first parameter study examines numerical and physical parameters in the model. The second one looks at the extension of the domain and turbulence as well as the characteristics of the flow far downstream. The third one gathers information on the downstream development of turbulence with different combinations of wind shear and turbulence level. The impact of placing the turbines at different distances from the turbulence plane is also studied. Finally a second study of an existing wind farm is performed and compared with a mesoscale model. The model is shown to be relevant also for studies of long distance wakes. Combining LES with a mesoscale model can be of interest.
|
|
| 4. |
- Eriksson, Ola, et al.
(författare)
-
Wake downstream of the Lillgrund wind farm - A Comparison between LES using the actuator disc method and a Wind farm Parametrization in WRF
- 2015
-
Ingår i: WAKE CONFERENCE 2015. - : IOP Publishing. ; , s. 012028-
-
Konferensbidrag (refereegranskat)abstract
- Simulations of the Lillgrund wind farm (located between Malmo and Copenhagen) are performed using both Large Eddy Simulation (LES) and mesoscale simulations in WRF. The aim is to obtain a better understanding of wakes generated by entire wind farms in order to improve the understanding of farm to farm interactions. The study compares the results from the two used models for the energy production and the wake characteristics downstream of the wind farm. A comparison is also performed with regards to the production data from the Lillgrund wind farm which has been filtered to be comparable to the case used in the simulations. The studied case, based on a prerun in WRF without any wind farm, has an inflow angle of 222 +/- 2.5 deg, a wind speed at hub height of 9.8 m/s and a near neutral atmosphere. A logarithmic wind shear is used in LES and the turbulence intensity is 5.9%. The WRF simulations use a parameterization for wind farms. The wind farm is treated by the model as a sink of the resolved atmospheric momentum. The total energy extraction and the electrical power are respectively proportional to specified thrust and power coefficients. The generated turbulent kinetic energy are the difference between the total and the electrical power. The LES are performed using the EllipSys3D code applying the actuator disc methodology for representing the presence of the rotors. Synthetic atmospheric turbulence is generated with the Mann model. Both the atmospheric turbulence and the wind shear are introduced using body forces. The production was found to be better estimated in LES. WRF show a slightly higher recovery behind the farm. The internal boundary layer is for the compared simulation setups higher in LES while the wake expansion is about the same in both models. The results from the WRF parameterization could potentially be improved by increasing the grid resolution. For farm to farm interaction a combination of the two methods is found to be of interest.
|
|
| 5. |
|
|
| 6. |
- Nilsson, Karl, et al.
(författare)
-
Large-eddy simulations of the Lillgrund wind farm
- 2015
-
Ingår i: Wind Energy. - : John Wiley & Sons. - 1095-4244 .- 1099-1824. ; 18:3, s. 449-467
-
Tidskriftsartikel (refereegranskat)abstract
- The power production of the Lillgrund wind farm is determined numerically using large-eddy simulations and compared with measurements. In order to simulate realistic atmospheric conditions, pre-generated turbulence and wind shear are imposed in the computational domain. The atmospheric conditions are determined from data extracted from a met mast, which was erected prior to the establishment of the farm. In order to allocate most of the computational power to the simulations of the wake flow, the turbines are modeled using an actuator disc method where the discs are imposed in the computational domain as body forces which for every time step are calculated from tabulated airfoil data. A study of the influence of imposed upstream ambient turbulence is performed and shows that higher levels of turbulence results in slightly increased total power production and that it is of great importance to include ambient turbulence in the simulations. By introducing ambient atmospheric turbulence, the simulations compare very well with measurements at the studied inflow angles. A final study aiming at increasing the farm production by curtailing the power output of the front row turbines and thus letting more kinetic energy pass downstream is performed. The results, however, show that manipulating only the front row turbines has no positive effect on the farm production, and therefore, more complex curtailment strategies are needed to be tested.
|
|
| 7. |
- Nilsson, Karl, et al.
(författare)
-
Validation of the actuator line method using near wake measurements of the MEXICO rotor
- 2015
-
Ingår i: Wind Energy. - : John Wiley & Sons. - 1095-4244 .- 1099-1824. ; 18:3, s. 499-514
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of the present work is to validate the capability of the actuator line method to compute vortex structures in the near wake behind the MEXICO experimental wind turbine rotor. In the MEXICO project/MexNext Annex, particle image velocimetry measurements have made it possible to determine the exact position of each tip vortex core in a plane parallel to the flow direction. Determining center positions of the vortex cores makes it possible to determine the trajectory of the tip vortices, and thus the wake expansion in space, for the analyzed tip speed ratios. The corresponding cases, in terms of tip speed ratios, have been simulated by large-eddy simulations using a Navier - Stokes code combined with the actuator line method. The flow field is analyzed in terms of wake expansion, vortex core radius, circulation and axial and radial velocity distributions. Generally, the actuator line method generates significantly larger vortex cores than in the experimental cases, but predicts the expansion, the circulation and the velocity distributions with satisfying results. Additionally, the simulation and experimental data are used to test three different techniques to compute the average axial induction in the wake flow. These techniques are based on the helical pitch of the tip vortex structure, 1D momentum theory and wake expansion combined with mass conservation. The results from the different methods vary quite much, especially at high values of λ.
|
|
