| 1. |
- Al-Adili, Ali, et al.
(författare)
-
Analysis of prompt fission neutrons in U-235(nth,f) and fission fragment distributions for the thermal neutron induced fission of U-234
- 2016
-
Ingår i: CNR*15 - 5th International Workshop On Compound-Nuclear Reactions And Related Topics. - : EDP Sciences.
-
Konferensbidrag (refereegranskat)abstract
- This paper presents the ongoing analysis of two fission experiments. Both projects are part of the collaboration between the nuclear reactions group at Uppsala and the JRC-IRMM. The first experiment deals with the prompt fission neutron multiplicity in the thermal neutron induced fission of U-235(n,f). The second, on the fission fragment properties in the thermal fission of U-234(n,f). The prompt fission neutron multiplicity has been measured at the JRC-IRMM using two liquid scintillators in coincidence with an ionization chamber. The first experimental campaign focused on U-235(nth,f) whereas a second experimental campaign is foreseen later for the same reaction at 5.5 MeV. The goal is to investigate how the so-called saw-tooth shape changes as a function of fragment mass and excitation energy. Some harsh experimental conditions were experienced due to the large radiation background. The solution to this will be discussed along with preliminary results. In addition, the analysis of thermal neutron induced fission of U-234(n,f) will be discussed. Currently analysis of data is ongoing, originally taken at the ILL reactor. The experiment is of particular interest since no measurement exist of the mass and energy distributions for this system at thermal energies. One main problem encountered during analysis was the huge background of U-235(nth, f). Despite the negligible isotopic traces in the sample, the cross section difference is enormous. Solution to this parasitic background will be highlighted.
|
|
| 2. |
- Al-Adili, Ali, et al.
(författare)
-
Fission Activities of the Nuclear Reactions Group in Uppsala
- 2015
-
Ingår i: Scientific Workshop on Nuclear Fission Dynamics and the Emission of Prompt Neutrons and Gamma Rays, THEORY-3. - : Elsevier BV. ; , s. 145-149
-
Konferensbidrag (refereegranskat)abstract
- This paper highlights some of the main activities related to fission of the nuclear reactions group at Uppsala University. The group is involved for instance in fission yield experiments at the IGISOL facility, cross-section measurements at the NFS facility, as well as fission dynamics studies at the IRMM JRC-EC. Moreover, work is ongoing on the Total Monte Carlo (TMC) methodology and on including the GEF fission code into the TALYS nuclear reaction code. Selected results from these projects are discussed.
|
|
| 3. |
- Al-Adili, Ali, et al.
(författare)
-
Neutron-multiplicity experiments for enhanced fission modelling
- 2017
-
Ingår i: EPJ Web of Conferences. - : EDP Sciences. - 9782759890200
-
Konferensbidrag (refereegranskat)abstract
- The nuclear de-excitation process of fission fragments (FF) provides fundamental information for the understanding of nuclear fission and nuclear structure in neutron-rich isotopes. The variation of the prompt-neutron multiplicity, ν(A), as a function of the incident neutron energy (En) is one of many open questions. It leads to significantly different treatments in various fission models and implies that experimental data are analyzed based on contradicting assumptions. One critical question is whether the additional excitation energy (Eexc) is manifested through an increase of ν(A) for all fragments or for the heavy ones only. A systematic investigation of ν(A) as a function of En has been initiated. Correlations between prompt-fission neutrons and fission fragments are obtained by using liquid scintillators in conjunction with a Frisch-grid ionization chamber. The proof-of-principle has been achieved on the reaction 235U(nth,f) at the Van De Graff (VdG) accelerator of the JRC-Geel using a fully digital data acquisition system. Neutrons from 252Cf(sf) were measured separately to quantify the neutron-scattering component due to surrounding shielding material and to determine the intrinsic detector efficiency. Prelimenary results on ν(A) and spectrum in correlation with FF properties are presented.
|
|
| 4. |
- Al-Adili, Ali, et al.
(författare)
-
Simulations of the fission-product stopping efficiency in IGISOL
- 2015
-
Ingår i: European Physical Journal A. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 51:59, s. 1-7
-
Tidskriftsartikel (refereegranskat)abstract
- At the Jyväskylä Ion Guide Isotope Separator On-Line (IGISOL) facility, independent fission yields are measured employing the Penning-trap technique. Fission products are produced, e.g. by impinging protons on a uranium target, and are stopped in a gas-filled chamber. The products are collected by a flow of He gas and guided through a mass separator to a Penning trap, where their masses are identified. This work investigates how fission-product properties, such as mass and energy, affect the ion stopping efficiency in the gas cell. The study was performed using the Geant4 toolkit and the SRIM code. The main results show a nearly mass-independent ion stopping with regard to the wide spread of ion masses and energies, with a proper choice of uranium target thickness. Although small variations were observed, in the order of 5%, the results are within the systematic uncertainties of the simulations. To optimize the stopping efficiency while reducing the systematic errors, different experimental parameters were varied; for instance material thicknesses and He gas pressure. Different parameters influence the mass dependence and could alter the mass dependencies in the ion stopping efficiency.
|
|
| 5. |
- Al-Adili, Ali, et al.
(författare)
-
Studying fission neutrons with 2E-2v and 2E
- 2018
-
Ingår i: SCIENTIFIC WORKSHOP ON NUCLEAR FISSION DYNAMICS AND THE EMISSION OF PROMPT NEUTRONS AND GAMMA RAYS (THEORY-4). - : EDP Sciences. - 9782759890316
-
Konferensbidrag (refereegranskat)abstract
- This work aims at measuring prompt-fission neutrons at different excitation energies of the nucleus. Two independent techniques, the 2E-2v and the 2E techniques, are used to map the characteristics of the mass-dependent prompt fission neutron multiplicity, 7(A), when the excitation energy is increased. The VERDI 2E-2v spectrometer is being developed at JRC-GEEL. The Fission Fragment (FF) energies are measured using two arrays of 16 silicon (Si) detectors each. The FFs velocities are obtained by time-of-flight, measured between micro-channel plates (MCP) and Si detectors. With MCPs placed on both sides of the fission source, VERDI allows for independent timing measurements for both fragments. Cf-252(sf) was measured and the present results revealed particular features of the 2E-2v technique. Dedicated simulations were also performed using the GEF code to study important aspects of the 2E-2v technique. Our simulations show that prompt neutron emission has a non-negligible impact on the deduced fragment data and affects also the shape of 17(A). Geometrical constraints lead to a total-kinetic energy-dependent detection efficiency. The 2E technique utilizes an ionization chamber together with two liquid scintillator detectors. Two measurements have been performed, one of Cf-252(sf) and another one of thermal-neutron induced fission in U-235(n,f). Results from Cf-252(sf) are reported here.
|
|
| 6. |
- Gorelov, D., et al.
(författare)
-
Developments for neutron-induced fission at IGISOL-4
- 2016
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section B. - : Elsevier BV. - 0168-583X .- 1872-9584.
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract At the IGISOL-4 facility, neutron-rich, medium mass nuclei have usually been produced via charged particle-induced fission of natural uranium and thorium. Neutron-induced fission is expected to have a higher production cross section of the most neutron-rich species. Development of a neutron source along with a new ion guide continues to be one of the major goals since the commissioning of IGISOL-4. Neutron intensities at different angles from a beryllium neutron source have been measured in an on-line experiment with a 30 MeV proton beam. Recently, the new ion guide coupled to the neutron source has been tested as well. Details of the neutron source and ion guide design together with preliminary results from the first neutron-induced fission experiment at IGISOL-4 are presented in this report.
|
|
| 7. |
- Gorelov, D., et al.
(författare)
-
Measuring independent yields of fission products using a penning trap
- 2015
-
Ingår i: Bulletin of the Russian Academy of Sciences: Physics. - 1062-8738. ; 79:7, s. 869-871
-
Tidskriftsartikel (refereegranskat)abstract
- A new method for determining independent fission products is used in an experiment at the Accelerator Laboratory of the University of Jyväskylä. The method combines the chemical universality of the ion guide technique and the unique properties of the Penning trap. A beam of charged particles is formed by stopping fission products in gaseous helium. The Penning trap is employed as a highly accurate filter to identify particles by their mass. The yields of fission products are determined by the ion count downstream of the trap. The setup’s mass resolving power is on the order of 105 with a radio frequency excitation time of 400 ms. Such high mass resolution occasionally allows us not only to separate nuclides but to separate the isomeric and ground states of nuclei as well. Independent yields of fission products are measured in the fission reaction of the 232Th isotope by protons with an energy of 25 MeV. A short description of the method ae nd soexperimental data are supplememnted by the results fro theoretical calculations.
|
|
| 8. |
- Lantz, Mattias, et al.
(författare)
-
Fission yield measurements at IGISOL
- 2016
-
Ingår i: CNR*15 - 5th International Workshop On Compound-Nuclear Reactions And Related Topics. - : EDP Sciences.
-
Konferensbidrag (refereegranskat)abstract
- The fission product yields are an important characteristic of the fission process. In fundamental physics, knowledge of the yield distributions is needed to better understand the fission process. For nuclear energy applications good knowledge of neutron-induced fission-product yields is important for the safe and efficient operation of nuclear power plants. With the Ion Guide Isotope Separator On-Line (IGISOL) technique, products of nuclear reactions are stopped in a buffer gas and then extracted and separated by mass. Thanks to the high resolving power of the JYFLTRAP Penning trap, at University of Jyvaskyla, fission products can be isobarically separated, making it possible to measure relative independent fission yields. In some cases it is even possible to resolve isomeric states from the ground state, permitting measurements of isomeric yield ratios. So far the reactions U(p,f) and Th(p,f) have been studied using the IGISOL-JYFLTRAP facility. Recently, a neutron converter target has been developed utilizing the Be(p,xn) reaction. We here present the IGISOL-technique for fission yield measurements and some of the results from the measurements on proton induced fission. We also present the development of the neutron converter target, the characterization of the neutron field and the first tests with neutron-induced fission.
|
|
| 9. |
|
|
| 10. |
- Mattera, Andrea, 1985-, et al.
(författare)
-
A methodology for the intercomparison of nuclear fission codes using TALYS
- 2017
-
Ingår i: ND 2016. - Les Ulis : EDP Sciences. - 9782759890200
-
Konferensbidrag (refereegranskat)abstract
- Codes for the calculation of fission observables are frequently used to describe experimentally observed phenomena as well as provide predictions in cases where measurements are missing. Assumptions in the models, and tuning of parameters within the codes, often result in a good reproduction of experimental data. In this work we propose a methodology, coded in the newly developed program DELFIN (De-Excitation of FIssion fragmeNts), that can be used to compare some of the assumptions of the various models. Our code makes use of the fission fragments information after scission and processes them in an independent and consistent fashion to obtain measurable fission observables (such as ν(A) distributions and Isomeric Fission Yield ratios). All the available information from the models, such as fragments' excitation energies, spin distributions and yields are provided as input to DELFIN that uses the nuclear reaction code TALYS to handle the de-excitation of the fission fragments. In this way we decouple the fragments relaxation from the actual fission models. We report here the first results of a comparison carried out on the GEF, Point-by-Point and FREYA models for thermal fission of 235U and 239Pu and spontaneous fission of 252Cf.
|
|
