| 1. |
- Lundstedt-Enkel, Katrin, et al.
(författare)
-
A Statistical Resampling Method To Calculate Biomagnification Factors Exemplified with Organochlorine Data from Herring (Clupea harengus) Muscle and Guillemot (Uria aalge) Egg from the Baltic Sea
- 2005
-
Ingår i: ENVIRONMENTAL SCIENCE & TECHNOLOGY. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 39:21, s. 8395-8402
-
Tidskriftsartikel (refereegranskat)abstract
- A novel method for calculating biomagnification factors is presented and demonstrated using contaminant concentration data from the Swedish national monitoring program regarding organochlorine contaminants (OCs) in herring (Clupea harengus) muscle and guillemot (Uria aalge) egg, sampled from 1996 to 1999 from the Baltic Sea. With this randomly sampled ratios (RSR) method, biomagnification factors (BMFRSR) were generated and denoted with standard deviation (0) as a measure of the variation. The BMFRSR were calculated by randomly selecting one guillemot egg out of a total of 29 and one herring out of a total of 74, and the ratio was determined between the concentration of a given OC in that egg and the concentration of the same OC in that herring. With the resampling technique, this was performed 50 000 times for any given OC, and from this new distribution of ratios, BMFRSR for each OC were calculated and given as geometric mean (GM) with GM standard deviation (GMSD) range, arithmetic mean (AM) with AMSD range, and minimum (BMFMIN) as well as maximum (BMFMAX) biomagnification factors. The 14 analyzed OCs were p,p'DDT and its metabolites p,p'DDE and p,p'DDD, polychlorinated biphenyls (PCB congeners: CB28, CB52, CB101, CB118, CB138, CB153, and CB180), hexachlorocyclohexane isomers (alpha-, beta-, and gamma HCH), and hexachlorobenzene (HCB). Multivariate data analysis (MVDA) methods, including principal components analysis (PCA), partial least squares regression (PLS), and PLS discriminant analyses (PLS-DA), were first used to extract information from the complex biological and chemical data generated from each individual animal. MVDA were used to model similarities/dissimilarities regarding species (PCA, PLS-DA), sample years (PLS), and sample location (PLS-DA) to give a deeper understanding of the data that the BMF modeling was based upon. Contaminants that biomagnify, that had BMFRSR significantly higher than one, were p,p'DDE, CB118, HCB, CB138, CB180, CB153, beta HCH, and CB28. The contaminants that did not biomagnify were p,p'DDT, p,p'DDD, alpha HCH, CB101, and CB52. Eventual biomagnification for gamma HCH could not be determined. The BMFRSR for OCs present in herring muscle and guillemot egg showed a broad span with large variations for each contaminant. To be able to make reliable calculations of BMFs for different contaminants, we emphasize the importance of using data based upon large numbers of, as well as well-defined, individuals.
|
|
| 2. |
|
|
| 3. |
- Olsson, Mats, et al.
(författare)
-
Gods i kontinuitet och omvandling
- 2006
-
Ingår i: Gods och bönder från högmedeltid till nutid. Kontinuitet genom omvandling på Vittskövle och andra skånska gods. ; , s. 7-20
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 4. |
|
|
| 5. |
- Olsson, Mats, et al.
(författare)
-
Storföretaget Vittskövle 1500-1950
- 2006
-
Ingår i: Gods och bönder från högmedeltid till nutid. Kontinuitet genom omvandling på Vittskövle och andra skånska gods. ; , s. 149-171
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 6. |
- Olsson, Mats, et al.
(författare)
-
Storjordbruk, statare och andra
- 2008
-
Ingår i: Statarliv - i myt och verklighet. - 9789178447572 ; , s. 41-86
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
- Andersson, Mats, et al.
(författare)
-
Road Friction Estimation
- 2007
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- This project is part of the Swedish IVSS program. The aim of IVSS is to stimulate research and development for the road safety of the future. Road conditions with low friction have been identified as a frequent cause of traffic accidents. Therefore, technology to automaticallydetect changes in road conditions and alert the driver or take proper actions with active driver support systems would be a key contribution to increased road safety.The aim of this project was to investigate the possibilities to estimate the tire to road friction.Three different approaches have been developed and evaluated, from concept to early prototypes in test vehicles. In the first method, the estimation of the coefficient of friction is based on the forces and torques that are produced at the front tires at cornering maneuvers.The second method is based on a physical model of the tire behavior and estimates road friction from information on the forces that are produced at straight driving. The third method is based on an optical sensor that classifies the road surface ahead of the vehicle.The three methods have been successfully evaluated in proving ground and public road tests in summer and winter conditions with different tires, and have been compared with reference measurements. The conclusion is that all three methods can be used for tire to road frictionestimation and are recommended for further development and industrialization.
|
|
| 8. |
- Blomdell, Anders, et al.
(författare)
-
Extending an Industrial Robot Controller-Implementation and Applications of a Fast Open Sensor Interface
- 2005
-
Ingår i: IEEE Robotics & Automation Magazine. - 1070-9932. ; 12:3, s. 85-94
-
Tidskriftsartikel (refereegranskat)abstract
- Many promising robotics research results were obtained during the late 1970s and early 1980s. Some examples include Cartesian force control and advanced motion planning. Now, 20 years and many research projects later, many technologies still have not reached industrial usage. An important question to consider is how this situation can be improved for future deployment of necessary technologies. Today, modern robot control systems used in industry provide highly optimized motion control that works well in a variety of standard applications. To this end, computationally intensive, model-based robot motion control techniques have become standard during the last decade. While the principles employed have been known for many years, deployment in products required affordable computing power, efficientengineering tools, customer needs for productivity/performance, and improved end-user competence in the utilization of performance features. However, applications that are considered nonstandard today motivate a variety of research efforts and system development to package results in a usable form. Actually, robots are not useful for many manufacturing tasks today, in particular those found in small and medium enterprises (SMEs). Reasonsinclude complex configuration, nonintuitive (for the shop floor) programming, and difficulties instructing robots to deal with variations in their environment. The latter challenge includes both task definitions and definition of motion control utilizing external sensors. The key word here is flexibility, and flexible motion control is particularly difficult since the user or system integrator needs to influence the core real-time software functions that are critical for the performance and safe operation of the system. We must find techniques that permit real-time motion controllers to be extended for new, demanding application areas.
|
|
| 9. |
|
|
| 10. |
- Jönsson, Fredrik, 1973-
(författare)
-
Olfactory Metacognition : A Metamemory Perspective on Odor Naming
- 2005
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Although many aspects of odor naming have received attention during the years, the participants' own cognitions (metamemory) about their naming attempts have not. (i) We showed that feeling of knowing (FOK) judgments accompanying odor naming failures are predictive of later recognition (Study I) or retrieval (Study III) of the missing name, but to a lesser degree than equivalent judgments about names of persons. “Tip of the nose” (TON) experiences do predict later odor name recall (Study I), but are otherwise poorly related to any partial activation of other information associated with the odor. (ii) We evaluated two theories proposed to explain the underlying basis of FOK judgments. Correlational analysis showed that FOK judgments about odor names are related to the perceived familiarity of the cue triggering the FOK (cue familiarity theory; Study III). FOK judgments are based on the amount of available information about the sought-for memory (accessibility theory; Study I and III). (iii) We demonstrated that the participants are overconfident in their odor naming attempts (Study I and II). This may to some degree be due to the arousing properties of the odors (Study II), suggesting that emotional variables should be taken into account when researching metamemory. (iv) Our inability to correctly name odors are typically not due to an uniquely poor association between odors and their proper names, but rather due to failures to identify the odors (Study III), that is, failures to retrieve “what it is”. It was also found that TOT experiences are unusual for odor names and more so than for person names. (v) We discuss potential differences between olfactory metamemory and metamemory for other modalities. The TON experience differs from the tip of the tongue (TOT) experience and the predictive validity is lower for metamemory judgments about odor names compared to other modalities.
|
|
