| 1. |
- Sorooshian, Shahryar, 1980, et al.
(författare)
-
Expedited analytical hierarchical process for multicriteria decision making
- 2022
-
Ingår i: ICIC Express Letters. - 1881-803X. ; 16:2, s. 145-151
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a procedure to overcome analytical hierarchical process (AHP) limitations was developed and tested, and a tool created via pairwise comparison chart and weighted sum method hybridization was introduced. In addition, a multicriteria decision-making software was selected to validate the constructed hybrid decision-making tool. The software was formulated based on an established decision-making technique. Data for the comparison analysis were obtained from an ongoing research, and output from the comparison analysis provided evidence for the accuracy of the constructed tool. The proposed hybridized method aligned with AHP reasoning but demonstrated a faster process; hence, it was called ‘expedited AHP’.
|
|
| 2. |
- Sorooshian, Shahryar, 1980, et al.
(författare)
-
Performance of the decision-making trial and evaluation laboratory
- 2023
-
Ingår i: AIMS Mathematics. - : American Institute of Mathematical Sciences (AIMS). - 2473-6988. ; 8:3, s. 7490-7514
-
Tidskriftsartikel (refereegranskat)abstract
- Multiple attribute decision-making (MADM) techniques constitute a practical approach for solving complex problems involving multiple and often conflicting criteria. Decision-making trial and evaluation laboratory (DEMATEL) is a popular MADM technique with both admirers and critics. This study presents a comprehensive review of DEMATEL through bibliometric analysis using the Scopus database. This article examined 3,521 papers published in journals, conferences or books between 1981 and 2023. We examined a few parameters for commenting on the performance of the technique. Among them are research outputs, the network of DEMATEL users, implementation subject areas, research zones, financing opportunities and publication hosts and their impact trends. We conclude from the findings of this study that the DEMATEL is capable of dealing with modern problem-solving in future environments. Although the growth of new MADMs is obvious, based on the gathered data, we forecast that more than 776 documents will be published in 2025 using DEMATEL for problem-solving. This expanding tendency will continue in the future. As distinct MADMs have diverse constraints, foundations, computing complexity and standpoints, which result in different performances, outmoded low-performance MADM techniques must be reported by researchers to continue this paper’s objective to minimize ambiguity among decision-makers and practitioners. To facilitate such a comparison in the future, a quantitative performance coefficient was also developed here.
|
|
| 3. |
- Strömberg, Ann-Brith, 1961, et al.
(författare)
-
Mixed-Integer Linear Optimization: Primal–Dual Relations and Dual Subgradient and Cutting-Plane Methods
- 2020
-
Ingår i: Numerical Nonsmooth Optimization: State of the Art Algorithms. - Cham : Springer International Publishing. ; , s. 499-547, s. 499-547
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- This chapter presents several solution methodologies for mixed-integer linear optimization, stated as mixed-binary optimization problems, by means of Lagrangian duals, subgradient optimization, cutting-planes, and recovery of primal solutions. It covers Lagrangian duality theory for mixed-binary linear optimization, a problem framework for which ultimate success—in most cases—is hard to accomplish, since strong duality cannot be inferred. First, a simple conditional subgradient optimization method for solving the dual problem is presented. Then, we show how ergodic sequences of Lagrangian subproblem solutions can be computed and used to recover mixed-binary primal solutions. We establish that the ergodic sequences accumulate at solutions to a convexified version of the original mixed-binary optimization problem. We also present a cutting-plane approach to the Lagrangian dual, which amounts to solving the convexified problem by Dantzig–Wolfe decomposition, as well as a two-phase method that benefits from the advantages of both subgradient optimization and Dantzig–Wolfe decomposition. Finally, we describe how the Lagrangian dual approach can be used to find near optimal solutions to mixed-binary optimization problems by utilizing the ergodic sequences in a Lagrangian heuristic, to construct a core problem, as well as to guide the branching in a branch-and-bound method. The chapter is concluded with a section comprising notes, references, historical downturns, and reading tips.
|
|
| 4. |
- Fotedar, Sunney, 1989, et al.
(författare)
-
A criterion space decomposition approach to generalized tri-objective tactical resource allocation
- 2023
-
Ingår i: Computational Management Science. - : Springer Science and Business Media LLC. - 1619-697X .- 1619-6988. ; 20:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present a tri-objective mixed-integer linear programming model of the tactical resource allocation problem with inventories, called the generalized tactical resource allocation problem (GTRAP). We propose a specialized criterion space decomposition strategy, in which the projected two-dimensional criterion space is partitioned and the corresponding sub-problems are solved in parallel by application of the quadrant shrinking method (QSM) (Boland in Eur J Oper Res 260(3):873–885, 2017) for identifying non-dominated points. To obtain an efficient implementation of the parallel variant of the QSM we suggest some modifications to reduce redundancies. Our approach is tailored for the GTRAP and is shown to have superior computational performance as compared to using the QSM without parallelization when applied to industrial instances.
|
|
| 5. |
- Fotedar, Sunney, 1989
(författare)
-
Mathematical Multi-Objective Optimization of the Tactical Allocation of Machining Resources in Functional Workshops
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In the aerospace industry, efficient management of machining capacity is crucial to meet the required service levels to customers and to maintain control of the tied-up working capital. We introduce new multi-item , multi-level capacitated resource allocation models with a medium--to--long--term planning horizon. The model refers to functional workshops where costly and/or time- and resource-demanding preparations (or qualifications) are required each time a product needs to be (re)allocated to a machining resource. Our goal is to identify possible product routings through the factory which minimize the maximum excess resource loading above a given loading threshold while incurring as low qualification costs as possible and minimizing the inventory. In Paper I , we propose a new bi-objective mixed-integer (linear) optimization model for the Tactical Resource Allocation Problem (TRAP). We highlight some of the mathematical properties of the TRAP which are utilized to enhance the solution process. In Paper II , we address the uncertainty in the coefficients of one of the objective functions considered in the bi-objective TRAP. We propose a new bi-objective robust efficiency concept and highlight its benefits over existing robust efficiency concepts. In Paper III , we extend the TRAP with an inventory of semi-finished as well as finished parts, resulting in a tri-objective mixed-integer (linear) programming model. We create a criterion space partitioning approach that enables solving sub-problems simultaneously. In Paper IV , using our knowledge from our previous work we embarked upon a task to generalize our findings to develop an approach for any discrete tri-objective optimization problem. The focus is on identifying a representative set of non-dominated points with a pre-defined desired coverage gap .
|
|
| 6. |
- Obradovic, Gabrijela, 1994, et al.
(författare)
-
Scheduling the repair and replacement of individual components in operating systems: a bi-objective mathematical optimization model
- 2024
-
Ingår i: Journal of Scheduling. - 1099-1425 .- 1094-6136. ; 27:1, s. 87-101
-
Tidskriftsartikel (refereegranskat)abstract
- Preventive maintenance (PM) is performed so that failure is avoided while corrective maintenance is performed after a failure has occurred in order to restore the system back to an operational state. This research aims at scheduling PM activities for a multi-component system within a finite time horizon. We consider a setting with two stakeholders, being the system operator and themaintenanceworkshop, and two different contract types governing their joint activities, namely an availability contract and a turn-around time contract. Components in the systems that are to be maintained are sent to the maintenance workshop, which needs to schedule and perform all maintenance activities while at the same time satisfying the contract and not exceeding the workshop capacity. Our modelling is based on a mixed-binary linear optimization model of a PM scheduling problem with so-called interval costs over a finite and discretized time horizon.We enhance this scheduling model with the flow of individual components through the maintenance workshop, including stocks of spare components, both those components that need repair and the repaired ones. The resulting scheduling model is then utilized in the optimization of two main contracts, namely maximizing the availability of repaired (or new) components and minimizing the deviation from the contracted turn-around times for the components in the maintenance loop. Each of these objectives is combined with the objective to minimize the costs for maintenance of the operating system, leading to two bi-objective optimization problems. We analyse the two contracting forms between the stakeholders by studying and comparing the Pareto fronts resulting from different parameter settings, regarding minimum allowed stock levels and investments in repair capacity of the workshop. Our bi-objective mixed-binary linear optimization model is able to capture important properties of the results from the contracting forms as well as to show that, in our setting, an availability contract performs better than a turn-around time contract in terms of tractability.
|
|
| 7. |
- Brandes, Julia, et al.
(författare)
-
On generating functions in additive number theory, II: lower-order terms and applications to PDEs
- 2021
-
Ingår i: Mathematische Annalen. - : Springer Science and Business Media LLC. - 0025-5831 .- 1432-1807. ; 379, s. 347-76
-
Tidskriftsartikel (refereegranskat)abstract
- We obtain asymptotics for sums of the form Sigma(p)(n=1) e(alpha(k) n(k) + alpha(1)n), involving lower order main terms. As an application, we show that for almost all alpha(2) is an element of [0, 1) one has sup(alpha 1 is an element of[0,1)) | Sigma(1 <= n <= P) e(alpha(1)(n(3) + n) + alpha(2)n(3))| << P3/4+epsilon, and that in a suitable sense this is best possible. This allows us to improve bounds for the fractal dimension of solutions to the Schrodinger and Airy equations.
|
|
| 8. |
- Ericsson, Niklas, 1968
(författare)
-
A Framework for Approximation of the Stokes Equations in an Axisymmetric Domain
- 2021
-
Ingår i: Computational Methods in Applied Mathematics. - : Walter de Gruyter GmbH. - 1609-4840 .- 1609-9389. ; 21:4
-
Tidskriftsartikel (refereegranskat)abstract
- We develop a framework for solving the stationary, incompressible Stokes equations in an axisymmetric domain. By means of Fourier expansion with respect to the angular variable, the three-dimensional Stokes problem is reduced to an equivalent, countable family of decoupled two-dimensional problems. By using decomposition of three-dimensional Sobolev norms, we derive natural variational spaces for the two-dimensional problems, and show that the variational formulations are well-posed. We analyze the error due to Fourier truncation and conclude that, for data that are sufficiently regular, it suffices to solve a small number of two-dimensional problems. © 2021 Ericsson, published by De Gruyter 2021.
|
|
| 9. |
- Kim, Inkang, et al.
(författare)
-
Toledo invariant of lattices in SU(2,1) via symmetric square
- 2020
-
Ingår i: Journal of Mathematical Physics. - : AIP Publishing. - 1089-7658 .- 0022-2488. ; 61:11
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we address the issue of the quaternionic Toledo invariant to study the character variety of two-dimensional complex hyperbolic uniform lattices into SU(n, 2), n ≥ 4. We construct four distinct representations to prove that the character variety contains at least seven distinct components. We also show the existence of holomorphic horizontal lift to various period domains of SU(n, 2).
|
|
| 10. |
- Malik, Adam, 1991
(författare)
-
Mathematical Modelling of Cell Migration and Polarization
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Cell migration plays a fundamental role in both development and disease. It is a complex process during which cells interact with one another and with their local environment. Mathematical modelling offers tools to investigate such processes and can give insights into the underlying biological details, and can also guide new experiments. The first two papers of this thesis are concerned with modelling durotaxis, which is the phenomena where cells migrate preferentially up a stiffness gradient. Two distinct mechanisms which potentially drive durotaxis are investigated. One is based on the hypothesis that adhesion sites of migrating cells become reinforced and have a longer lifespan on stiffer substrates. The second mechanism is based on cells being able to generate traction forces, the magnitude of which depend on the stiffness of the substrate. We find that both mechanisms can indeed give rise to biased migration up a stiffness gradient. Our results encourages new experiments which could determine the importance of the two mechanisms in durotaxis. The third paper is devoted to a population-level model of cancer cells in the brain of mice. The model incorporates diffusion tensor imaging data, which is used to guide the migration of the cells. Model simulations are compared to experimental data, and highlights the model’s difficulty in producing irregular growth patterns observed in the experiments. As a consequence, the findings encourage further model development. The fourth paper is concerned with modelling cell polarization, in the absence of environmental cues, referred to as spontaneous symmetry breaking. Polarization is an important part of cell migration, but also plays a role during division and differentiation. The model takes the form of a reaction diffusion system in 3D and describes the spatio-temporal evolution of three forms of Cdc42 in the cell. The model is able to produce biologically relevant patterns, and numerical simulations show how model parameters influence key features such as pattern formation and time to polarization.
|
|
