| 1. |
|
|
| 2. |
- Chen, Zhe, et al.
(författare)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Tidskriftsartikel (refereegranskat)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 3. |
- Eivazihollagh, Alireza, et al.
(författare)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
Ingår i: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Tidskriftsartikel (refereegranskat)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 4. |
- Moldenhauer, Patrick, 1983, et al.
(författare)
-
Chemical-looping combustion with heavy liquid fuels in a 10 kW pilot plant
- 2017
-
Ingår i: Fuel Processing Technology. - : Elsevier BV. - 0378-3820. ; 156, s. 124-137
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, chemical-looping combustion was performed with highly viscous vacuum residue. A fuel reactor with a fuel-injection system for liquid fuels was designed and built for a chemical-looping reactor with the nominal fuel input of 10 kWth. The gas velocities in the riser section and at the gas-distribution nozzles of this unit are comparable to those of industrial circulating fluidized-bed boilers. Reference experiments were performed with an ilmenite oxygen carrier and two different fuel blends that contained 40 wt.% and respectively 80 wt.% of vacuum residue in fuel oil 1. Fuel conversion was in line with that of experiments from an earlier campaign, where fuel oil 1 was used as fuel. The fuel contained a significant fraction of sulfur, but no SO2 was detected in the flue gas of the air reactor. More experiments were performed using an oxygen carrier based on calcium manganite. The oxygen carrier was exposed to fluidization at hot conditions (more than 600°C) for about 95 h, out of which fuel was injected during a total of 9.6 h. Undiluted vacuum residue, fuel oil 1 as well as different blends of these two were used as fuel. Furthermore, the parameters fuel flow, fuel-reactor temperature and air flow in the air reactor were varied to observe trends in fuel conversion. The experiments were carried out with a fuel flow corresponding to 4.0-6.2 kWth and an oxygen carrier-to-fuel ratio of about 1300-2000 kg/MWth (fuel-reactor bed mass per thermal fuel-power). With undiluted vacuum residue as fuel and a fuel-reactor temperature of 1000°C, up to 93% of all carbon leaving the fuel reactor was in the form of CO2. Carbon leakage from fuel reactor to air reactor was usually below 1% for all fuel types tested, but no SO2 was detected in the off-gas from the air reactor. The reactivity of the calcium manganite-based material decreased over the course of the experiments, which is likely due to sulfur poisoning. No defluidization or agglomeration problems were experienced over the course of the experimental campaign.
|
|
| 5. |
- Grolig, Jan Gustav, 1986
(författare)
-
Coated Ferritic Stainless Steels as Interconnects in Solid Oxide Fuel Cells - Material Development and Electrical Properties
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Solid oxide fuel cells (SOFCs) are attracting increasing interest as devices with potentialuses in decentralized and clean electricity and heat production. Several challengeswith respect to materials have to be overcome to achieve efficiencies and life-spansthat are sufficient for long-term applications.An important element of an SOFC stack is the interconnect component, which connectstwo adjacent fuel cell elements. Interconnects, which are commonly composedof ferritic stainless steels, have to be corrosion-resistant, mechanically stable and costoptimized.This work aimed to investigate economic solutions for interconnect materials and tounderstand the underlying mechanisms of degradation and electrical conduction ofthese materials. Mainly two substrates, a commercially available steel (AISI 441) anda ferritic stainless steel that was optimized for an SOFC application (Sandvik SanergyHT) were combined with different barrier coatings and exposed to a cathode-sideatmosphere. A method was developed that allows for the electrical characterizationof promising material systems and model alloys, thereby facilitating a fundamentalunderstanding of the dominant electrical conduction processes linked to the oxidescales that grow on interconnects. The AISI 441 steel coated with reactive elementsand cobalt showed good corrosion and chromium evaporation profiles, while AISI 441coated with cerium and cobalt also had promising electrical properties. The SanergyHT steel was examined with coatings of copper and iron and copper and manganese,respectively. The corrosion and chromium evaporation profiles of Sanergy HT wereimproved by coating with copper and iron. The copper and iron-coated Sanergy HTshowed lower area specific resistance values than cobalt-coated Sanergy HT. Chromia,which is the main constituent of oxide scales, was synthesized using differentmethods. The electrical properties of chromia were found to be sensitive to not onlyimpurities, but also heat treatment. Finally the electrical properties of cobalt- andcobalt cerium-coated Sanergy HT steels were investigated. It was revealed that theaddition of cerium improved the conductivity of the interconnect by both slowingdown chromia growth and preventing the outward diffusion of iron into the spinel.
|
|
| 6. |
- Hosseini Bab Anari, Elham, 1982, et al.
(författare)
-
Fluorine-free salts for aqueous lithium-ion and sodium-ion battery electrolytes
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:88, s. 6, 85194-85201
-
Tidskriftsartikel (refereegranskat)abstract
- A first generation of fluorine-free lithium and sodium salts based on the concept of pseudo-delocalized anions has been synthesized with both high purity and yield using water as the solvent in the reaction medium. The salts have been fully characterized by Raman and FT-IR spectroscopies, thermogravimetry, and X-ray crystallography to reveal both basic properties in terms of thermal stability and solubility as well as the local, mainly ion–ion interaction dictated, coordination details and by ionic conductivity and electrochemical stability window measurements as aqueous electrolytes. Together a picture is created of the salts' promise as components in electrolytes – primarily aiming at application in low voltage fluorinefree aqueous lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs).
|
|
| 7. |
|
|
| 8. |
- Salvador, Christian Mark, 1989, et al.
(författare)
-
Indoor ozone/human chemistry and ventilation strategies
- 2019
-
Ingår i: Indoor Air. - : Hindawi Limited. - 1600-0668 .- 0905-6947. ; 29:6, s. 913-925
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to better understand and quantify the influence of ventilation strategies on occupant-related indoor air chemistry. The oxidation of human skin oil constituents was studied in a continuously ventilated climate chamber at two air exchange rates (1 h-1 and 3 h-1 ) and two initial ozone mixing ratios (30 and 60 ppb). Additional measurements were performed to investigate the effect of intermittent ventilation ("off" followed by "on"). Soiled t-shirts were used to simulate the presence of occupants. A time-of-flight-chemical ionization mass spectrometer (ToF-CIMS) in positive mode using protonated water clusters was used to measure the oxygenated reaction products geranyl acetone, 6-methyl-5-hepten-2-one (6-MHO) and 4-oxopentanal (4-OPA). The measurement data were used in a series of mass balance models accounting for formation and removal processes. Reactions of ozone with squalene occurring on the surface of the t-shirts are mass transport limited; ventilation rate has only a small effect on this surface chemistry. Ozone-squalene reactions on the t-shirts produced gas-phase geranyl acetone, which was subsequently removed almost equally by ventilation and further reaction with ozone. About 70% of gas-phase 6-MHO was produced in surface reactions on the t-shirts, the remainder in secondary gas-phase reactions of ozone with geranyl acetone. 6-MHO was primarily removed by ventilation, while further reaction with ozone was responsible for about a third of its removal. 4-OPA was formed primarily on the surfaces of the shirts (~60%); gas-phase reactions of ozone with geranyl acetone and 6-MHO accounted for ~30% and ~10%, respectively. 4-OPA was removed entirely by ventilation. The results from the intermittent ventilation scenarios showed delayed formation of the reaction products and lower product concentrations compared to continuous ventilation.
|
|
| 9. |
- Akhtar, Farid, et al.
(författare)
-
Preparation of graded silicalite-1 substrates for all-zeolite membranes with excellent CO2/H-2 separation performance
- 2015
-
Ingår i: Journal of Membrane Science. - : Elsevier BV. - 0376-7388 .- 1873-3123. ; 493, s. 206-211
-
Tidskriftsartikel (refereegranskat)abstract
- Graded silicalite-1 substrates with a high gas permeability and low surface roughness have been produced by pulsed current processing of a thin coating of a submicron silicalite-1 powder onto a powder body of coarser silicalite-1 crystals. Thin zeolite films have been hydrothermally grown onto the graded silicalite-1 support and the all-zeolite membranes display an excellent CO2/H-2 separation factor of 12 at 0 degrees C and a CO2 permeance of 21.3 x 10(-7) mol m(-2) s(-1) Pa-1 for an equimolar CO2/H-2 feed at 505 kPa and 101 kPa helium sweep gas. Thermal cracking estimates based on calculated surface energies and measured thermal expansion coefficients suggest that all-zeolite membranes with a minimal thermal expansion mismatch between the graded substrate and the zeolite film should remain crack-free during thermal cycling and the critical calcination step.
|
|
| 10. |
- Heshmati, Mohsen, 1987, et al.
(författare)
-
Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy
- 2017
-
Ingår i: Materials and Design. - : Elsevier BV. - 1873-4197 .- 0264-1275. ; 122, s. 433-447
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, adhesive bonding has found its way to construction applications such as bridges. Given the harsh conditions that such structures are usually exposed to, it is necessary to account for environmental factors, particularly moisture and temperature, in the design phase. Cohesive zone modelling has attracted much attention in the last decade as a promising method to design adhesive joints. Despite this interest, the effects of moisture and thermal cycles on cohesive laws have not been investigated to the knowledge of the authors. In this paper, we present a method to directly measure the environmental-dependent cohesive laws of a structural adhesive loaded in pure Mode-I and Mode-II. Special consideration is given to overcome issues such as the time-consuming nature of moisture ingression and specimen dimensions, which could be problematic due to the size-limitations of conditioning equipment. The accuracy of this method was verified through simulation of the experiments using the finite element analysis. The effects of exposure to 95% relative humidity, immersion in saltwater and distilled water, and freeze-thaw cycles in the presence or absence of moisture were investigated. The results indicate the damaging effects of combined saltwater and freeze-thaw cycles which were clearly reflected on the shape of the cohesive laws.
|
|
