| 1. |
|
|
| 2. |
- Pardon, Gaspard, 1983-
(författare)
-
From Macro to Nano : Electrokinetic Transport and Surface Control
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Today, the growing and aging population, and the rise of new global threats on human health puts an increasing demand on the healthcare system and calls for preventive actions. To make existing medical treatments more efficient and widely accessible and to prevent the emergence of new threats such as drug-resistant bacteria, improved diagnostic technologies are needed. Potential solutions to address these medical challenges could come from the development of novel lab-on-chip (LoC) for point-of-care (PoC) diagnostics.At the same time, the increasing demand for sustainable energy calls for the development of novel approaches for energy conversion and storage systems (ECS), to which micro- and nanotechnologies could also contribute.This thesis has for objective to contribute to these developments and presents the results of interdisciplinary research at the crossing of three disciplines of physics and engineering: electrokinetic transport in fluids, manufacturing of micro- and nanofluidic systems, and surface control and modification. By combining knowledge from each of these disciplines, novel solutions and functionalities were developed at the macro-, micro- and nanoscale, towards applications in PoC diagnostics and ECS systems.At the macroscale, electrokinetic transport was applied to the development of a novel PoC sampler for the efficient capture of exhaled breath aerosol onto a microfluidic platform.At the microscale, several methods for polymer micromanufacturing and surface modification were developed. Using direct photolithography in off-stoichiometry thiol-ene (OSTE) polymers, a novel manufacturing method for mold-free rapid prototyping of microfluidic devices was developed. An investigation of the photolithography of OSTE polymers revealed that a novel photopatterning mechanism arises from the off-stoichiometric polymer formulation. Using photografting on OSTE surfaces, a novel surface modification method was developed for the photopatterning of the surface energy. Finally, a novel method was developed for single-step microstructuring and micropatterning of surface energy, using a molecular self-alignment process resulting in spontaneous mimicking, in the replica, of the surface energy of the mold.At the nanoscale, several solutions for the study of electrokinetic transport toward selective biofiltration and energy conversion were developed. A novel, comprehensive model was developed for electrostatic gating of the electrokinetic transport in nanofluidics. A novel method for the manufacturing of electrostatically-gated nanofluidic membranes was developed, using atomic layer deposition (ALD) in deep anodic alumina oxide (AAO) nanopores. Finally, a preliminary investigation of the nanopatterning of OSTE polymers was performed for the manufacturing of polymer nanofluidic devices.
|
|
| 3. |
- Decrop, Deborah, et al.
(författare)
-
Single-step manufacturing of femtoliter microwell arrays in a novel surface energy mimicking polymer
- 2015
-
Ingår i: 18th International Conference on Solid-State Sensors, Actuators and Microsystems (IEEE TRANSDUCER 2015). - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- We report a novel polymer material formulation and stamp-molding technique that enable rapid single-step manufacturing of hydrophilic-in-hydrophobic microwell arrays. We developed a modified thiol-ene-epoxy polymer (mOSTE+) formulation that mimics the surface energy of its mold during polymerization. The polymer inherits the surface energy from the mold through molecular self-assembly, in which functional monomers self-assemble at the interface between the liquid prepolymer and the mold surface. Combining this novel mOSTE+ material with a stamp-molding process leads to simultaneous surface energy mimicking and micro-structuring. This method was used to manufacture microwells with hydrophilic bottom and hydrophobic sidewall, depressed in a surrounding hydrophobic surface. The microwell arrays were successfully tested for the self-assembly of 62’000 femtoliter-droplets. Such femtoliter droplet arrays are useful for, e.g., digital ELISA and single cell/molecule analysis applications.
|
|
| 4. |
- Amundin, Mats, et al.
(författare)
-
A proposal to use distributional models to analyse dolphin vocalisation
- 2017
-
Ingår i: Proceedings of the 1st International Workshop on Vocal Interactivity in-and-between Humans, Animals and Robots, VIHAR 2017. - 9782956202905 ; , s. 31-32
-
Konferensbidrag (refereegranskat)abstract
- This paper gives a brief introduction to the starting points of an experimental project to study dolphin communicative behaviour using distributional semantics, with methods implemented for the large scale study of human language.
|
|
| 5. |
- Seoane, Fernando, et al.
(författare)
-
Conductive Polymer Films as Textrodes for Biopotential Sensing
- 2011
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Introduction: After several years of progresses in textile technology and wearable measurement instrumentation, applications of wearable textile-electronics systems are arising providing a stable background for commercial applications. So far, the available commercial solutions are centered on fitness applications and mostly based in the acquisition of heart rate through Textile Electrodes (Textrodes) based on metallic threads or on conductive rubber compounds. Methods and Materials: In this work a novel material approach is presented to produce Textrodes for acquisition of Electrocardiographic (ECG) signals using a conductive polypropylene (PP1386 from Premix, Finland) polymer material. The polymer was film extruded into thin films, and used as such in the Textrode. Conductive Polymer Films (CPF) have been used to produce Textrodes, and its measurement performance has been compared with the ECG signals obtained with commercial Textrode fabrics and conventional Ag/AgCl electrodes. In order to set up the same measurement conditions, a chest strap tailored to host the testing electrodes has been used. Results: The close resemblance of the ECG acquired with the textile fabric electrodes, the Ag/AgCl electrodes and the PP1386 CPF electrodes suggest that the Polymer Electrodes PP1386 are a feasible alternative to the current textile fabrics that use silver thread as conductive material and also to conductive rubber material. Discussion & Conclusion: The availability of the Conductive Polymer Electrode PP1386 in a film form allows the manufacturing of electrodes by conventional textile processes, like lamination or sewing, therefore facilitating the transition from lab prototyping to industrial manufacturing. Replacing the traditional silver thread as conductive element in the fabrication of Textrodes will definitely reduce the material cost per Textrode. Biocompatibility issues and manufacturability issues must be addressed but the exhibited functional performance is showing encouraging results.
|
|
| 6. |
- Schötz, Susanne, et al.
(författare)
-
Phonetic Characteristics of Domestic Cat Vocalisations
- 2017
-
Ingår i: Proceedings of the 1st International Workshop on Vocal Interactivity in-and-between Humans, Animals and Robots, VIHAR 2017. - 9782956202905 ; , s. 5-6
-
Konferensbidrag (refereegranskat)abstract
- The cat (Felis catus, Linneaus 1758) has lived around or with humans for at least 10,000 years, and is now one of the most popular pets of the world with more than 600 millionindividuals. Domestic cats have developed a more extensive, variable and complex vocal repertoire than most other members of the Carnivora, which may be explained by their social organisation, their nocturnal activity and the long period of association between mother and young. Still, we know surprisingly little about the phonetic characteristics of these sounds, and about the interaction between cats and humans.Members of the research project Melody in human–cat communication (Meowsic) investigate the prosodic characteristics of cat vocalisations as well as the communication between human and cat. The first step includes a categorisation of cat vocalisations. In the next step it will be investigated how humans perceive the vocal signals of domestic cats. This paper presents an outline of the project which has only recently started.
|
|
| 7. |
- Macias, Raul, et al.
(författare)
-
Performance of the Load-in-the-Loop Single Op-Amp Voltage Controlled Current Source from the Op-Amp Parameters
- 2010
-
Ingår i: Journal of Physics: Conference Series. - : Institute of Physics Publishing Ltd.. - 1742-6596 .- 1742-6588.
-
Konferensbidrag (refereegranskat)abstract
- In recent years, Electrical Bioimpedance (EBI) methods have gained importance. These methods are often based on obtaining impedance spectrum in the range of β-dispersion, i.e. from a few kHz up to some MHz. To measure EBI a constant current is often injected and the voltage across the tissue under study (TUS) is recorded. Due to the performance of the current source influences the performance of the entire system, in terms of frequency range, several designs have been implemented and studied. In this paper the basic structure of a Voltage-Controlled Current Source (VCCS) based on a single Op-Amp in inverter configuration with a floating load, known as load-in-the-loop current source, is revisited and studied deeply. We focus on the dependence of the output impedance with the circuit parameters, i.e. the feedback resistor and the inverter-input resistor, and the Op-Amp main parameters, i.e. open loop gain, CMRR and input impedance. After obtaining the experimental results and comparing to the theoretical and simulated ones, they confirm the design under study can be a good solution for multi-frequency wideband EBI applications because of higher values of the output impedance than 100kΩ at 1MHz are obtained. Furthermore, an enhancement of the basic design, using a current conveyor as a first stage, is proposed, studied and implemented.
|
|
| 8. |
- Hafid, Abdelakram, et al.
(författare)
-
Full Impedance Cardiography Measurement Device Using Raspberry PI3 and System-on-Chip Biomedical Instrumentation Solutions
- 2018
-
Ingår i: IEEE journal of biomedical and health informatics. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 2168-2194 .- 2168-2208. ; 22:6, s. 1883-1894
-
Tidskriftsartikel (refereegranskat)abstract
- Impedance cardiography (ICG) is a noninvasive method for monitoring cardiac dynamics using electrical bioimpedance (EBI) measurements. Since its appearance more than 40 years ago, ICG has been used for assessing hemodynamic parameters. This paper presents a measurement system based on two System on Chip (SoC) solutions and Raspberry PI, implementing both a full three-lead ECG recorder and an impedance cardiographer, for educational and research development purposes. Raspberry PI is a platform supporting Do-I t-Yourself project and education applications across the world. The development is part of Biosignal PI, an open hardware platform focusing in quick prototyping of physiological measurement instrumentation. The SoC used for sensing cardiac biopotential is the ADAS1000, and for the EBI measurement is the AD5933. The recordings were wirelessly transmitted through Bluetooth to a PC, where the waveforms were displayed, and hemodynamic parameters such as heart rate, stroke volume, ejection time and cardiac output were extracted from the ICG and ECG recordings. These results show how Raspberry PI can be used for quick prototyping using relatively widely available and affordable components, for supporting developers in research and engineering education. The design and development documents will be available on www.BiosignalPl.com, for open access under a Non Commercial-Share A like 4.0 International License.
|
|
| 9. |
- Kleyko, Denis, et al.
(författare)
-
Vehicle Classification using Road Side Sensors and Feature-free Data Smashing Approach
- 2016
-
Ingår i: 2016 IEEE 19th International Conference on Intelligent Transportation Systems (ITSC). - Piscataway : IEEE. - 9781509018895 - 9781509018888 - 9781509018901 ; , s. 1988-1993
-
Konferensbidrag (refereegranskat)abstract
- The main contribution of this paper is a study of the applicability of data smashing - a recently proposed data mining method - for vehicle classification according to the "Nordic system for intelligent classification of vehicles" standard, using measurements of road surface vibrations and magnetic field disturbances caused by passing vehicles. The main advantage of the studied classification approach is that it, in contrast to the most of traditional machine learning algorithms, does not require the extraction of features from raw signals. The proposed classification approach was evaluated on a large dataset consisting of signals from 3074 vehicles. Hence, a good estimate of the actual classification rate was obtained. The performance was compared to the previously reported results on the same problem for logistic regression. Our results show the potential trade-off between classification accuracy and classification method's development efforts could be achieved.
|
|
| 10. |
- Petersson, Jesper, 1974
(författare)
-
Technospatialities and telehealthcare: Unfolding new spaces of visibility
- 2016
-
Ingår i: Information, Communication & Society. - 1369-118X .- 1468-4462. ; 19:6, s. 824-842
-
Tidskriftsartikel (refereegranskat)abstract
- The umbrella term ‘telehealthcare’ denotes an array of information and communication technology-based solutions for digitally connecting citizens with healthcare services. Guided by the conviction that bodies can be translated into digital data which may serve as the basis for clinical decisions made elsewhere, these designs are widely assumed to enable a mode of healthcare delivery which is independent of space and time. Addressing the increasing use of telehealthcare for personalized health monitoring targeting the growing populations of elderly and chronic-care patients, this paper suggests that such designs invariably unfold new spaces of visibility. Based on an analysis of articles published in a leading telehealthcare journal, I argue that these new visibilities do not provide a window onto something that is already there. Instead, such visibilities are shaped by the way techno-medical practices and knowledge production processes are intertwined with a specific politico-economic agenda. The paper explores differences with respect to the positioning of older people and chronic-care patients in relation to two versions of health monitoring. While each version represents an attempt to promote individual freedom, improve health outcomes and ensure a functioning healthcare system, contrasting rationales are involved and different types of spaces are being unfolded.
|
|
