| 1. |
|
|
| 2. |
- Lewin, Erik, 1979-
(författare)
-
Design of carbide-based nanocomposite coatings
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In this thesis research on synthesis, microstructure and properties of carbide-based coatings is reported. These coatings are electrically conducting, and can be tailored for high hardness, low friction and wear, along with load-adaptive behaviour. Tailoring these properties is achieved by controlling the relative phase content of the material. Coatings have been synthesised by dc magnetron sputtering, and their structures have been characterised, mainly by X-ray photoelectron spectroscopy and X-ray diffraction.It has been shown that nanocomposites comprising of a nanocrystalline transition metal carbide (nc-MeCx, Me = Ti, Nb or V) and an amorphous carbon (a-C) matrix can result in low contact resistance in electrical contacts. Such materials also exhibit low friction and high resistance to wear, making them especially suitable for application in sliding contacts. The lowest contact resistance is attained for small amounts of the amorphous carbon phase.It has been shown that specific bonding structures are present in the interface between nc-TiCx and the a-C phases in the nanocomposite. It was found in particular that Ti3d and C2p states are involved, and that considerable charge transfer occurs across the interface, thereby influencing the structure of the carbide.Further design possibilities were demonstrated for TiCx-based nanocomposites by alloying them with weakly carbide-forming metals, i.e., Me = Ni, Cu or Pt. Metastable supersaturated solid solution carbides, (T1-xMex)Cy, were identified to result from this alloying process. The destabilisation of the TiCx-phase leads to changes in the phase distribution in the deposited nanocomposites, thus providing further control over the amount of carbon phase formed. Additional design possibilities became available through the decomposition of the metastable (Ti1-xMex)Cy phase through an appropriate choice of annealing conditions, yielding either more carbon phase or a new metallic phase involving Me. This alloying concept was also studied theoretically for all 3d transition metals using DFT techniques.It has also been demonstrated that Ar-ion etching (commonly used in the analysis of carbide based nanocomposites) can seriously influence the result of the analysis, especially for materials containing metastable phases. This implies that more sophisticated methods, or considerable care are needed in making these analyses, and that many of the earlier published results could well be in error.
|
|
| 3. |
- Lewin, Erik, et al.
(författare)
-
Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications
- 2009
-
Ingår i: Plasma Processes and Polymers. - : WILEY-VCH Verlag GmbH & Co. - 1612-8850. ; 6:S1, s. S928-S934
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocomposite nc-TiC/a-C coatings were prepared by non-reactive magnetron sputtering in industrial scale equipment, under varying deposition conditions in order to investigate upscaling and possible industrialisation. The coatings were found to have similar microstructure and performance compared to previous laboratory scale experiments. The samples were characterised with XRD, XPS and SEM as well with ball-on-disc, nanoindentation and electrical measurements. Coatings containing a small fraction of a-C matrix phase were found to have promising both electrical properties (rho < 400 mu Omega cm and contact resistances down to 0.34 m Omega at 40 N) and tribological properties (f < 0.3 for 10 000 laps).
|
|
| 4. |
- Laarz, Eric, et al.
(författare)
-
Colloidal processing of Al2O3-based composites reinforced with TiN and TiC particulates, whiskers and nanoparticles
- 2001
-
Ingår i: Journal of the European Ceramic Society. - 0955-2219 .- 1873-619X. ; 21:8, s. 1027-1035
-
Tidskriftsartikel (refereegranskat)abstract
- A colloidal processing route has been developed for the preparation of dense and homogeneous Al2O3–TiN/TiC composites. The dispersion and rheological properties of mixtures of TiN or TiC particulates and Al2O3 particles were investigated using electrokinetics and steady-shear rheology. We found that well-dispersed aqueous suspensions with low viscosity could be prepared by adding a poly(acrylic acid) dispersant and controlling pH in the alkaline range. This processing scheme was also suitable for preparation of whisker and nanoparticle composite suspensions. The alumina-based composite suspensions with a secondary-phase concentration of 25 vol.% were freeze-granulated and hot-pressed, and the resulting bodies were fully densified with well-dispersed secondary phases. Homogeneous Al2O3–TiN nanoparticle composites could only be prepared with additions of up to 5 vol.% nanoparticles; higher additions resulted in agglomeration and subsequent grain growth of the nanoparticles.
|
|
| 5. |
- Abrahamsson, Maria, et al.
(författare)
-
Steric influence on the excited-state lifetimes of ruthenium complexes with bipyridyl-alkanylene-pyridyl ligands.
- 2008
-
Ingår i: Inorganic Chemistry. - : ACS. - 0020-1669 .- 1520-510X. ; 47:9, s. 3540-3548
-
Tidskriftsartikel (refereegranskat)abstract
- The structural effect on the metal-to-ligand charge transfer (MLCT) excited-state lifetime has been investigated in bis-tridentate Ru(II)-polypyridyl complexes based on the terpyridine-like ligands [6-(2,2'-bipyridyl)](2-pyridyl)methane (1) and 2-[6-(2,2'-bipyridyl)]-2-(2-pyridyl)propane (2). A homoleptic ([Ru(2)(2)](2+)) and a heteroleptic complex ([Ru(ttpy)(2)](2+)) based on the new ligand 2 have been prepared and their photophysical and structural properties studied experimentally and theoretically and compared to the results for the previously reported [Ru(1)(2)](2+). The excited-state lifetime of the homoleptic Ru-II complex with the isopropylene-bridged ligand 2 was found to be 50 times shorter than that of the corresponding homoleptic Ru-II complex of ligand 1, containing a methylene bridge. A comparison of the ground-state geometries of the two homoleptic complexes shows that steric interactions involving the isopropylene bridges make the coordination to the central Ru-II ion less octahedral in [Ru(2)(2)](2+) than in [Ru(1)(2))(2+). Calculations indicate that the structural differences in these complexes influence their ligand field splittings as well as the relative stabilities of the triplet metal-to-ligand charge transfer ((MLCT)-M-3) and metal-centered ((MC)-M-3) excited states. The large difference in measured excited-state lifetimes for the two homoleptic Ru-II complexes is attributed to a strong influence of steric interactions on the ligand field strength, which in turn affects the activation barriers for thermal conversion from (MLCT)-M-3 states to short-lived (MC)-M-3 states.
|
|
| 6. |
- Hassellöv, Martin, 1970, et al.
(författare)
-
REACH missar nano!
- 2009
-
Ingår i: Miljöforskning. ; 2009:3-4
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
- Marinado, Tannia, et al.
(författare)
-
Rhodanine dyes for dye-sensitized solar cells : spectroscopy, energy levels and photovoltaic performance
- 2009
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - Cambridge : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 11:1, s. 133-141
-
Tidskriftsartikel (refereegranskat)abstract
- Three new sensitizers for photoelectrochemical solar cells were synthesized consisting of a triphenylamine donor, a rhodanine-3-acetic acid acceptor and a polyene connection. The conjugation length was systematically increased, which resulted in two effects: first, it led to a red-shift of the optical absorption of the dyes, resulting in an improved spectral overlap with the solar spectrum.Secondly, the oxidation potential decreased systematically. The excited state levels were, however, calculated to be nearly stationary. The experimental trends were in excellent agreement with density functional theory (DFT) computations. The photovoltaic performance of this set of dyes as sensitizers in mesoporous TiOredox couple. The dye with the best absorption characteristics showed the poorest solar cell efficiency, due to losses by recombination of electrons in TiOthe electrolyte led to a strongly reduced photocurrent for all dyes due to a reduced electron injection efficiency, caused by a 0.15 V negative shift of the TiO 2 solar cells was investigated using electrolytes containing the iodide/triiodide2 with triiodide. Addition of 4-tert butylpyridine to2 conduction band potential.
|
|
| 8. |
- Morandeira, Ana, et al.
(författare)
-
Improved photon-to-current conversion efficiency with a nanoporous p-type NiO electrode by the use of a sensitizer-acceptor dyad
- 2008
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 112:5, s. 1721-1728
-
Tidskriftsartikel (refereegranskat)abstract
- A peryleneimide sensitizer and a covalently linked peryleneimide-naphthalenediimide dyad were prepared and characterized by absorption and emission spectroscopies, electrochemistry, and spectroelectrochemistry. These compounds were chemisorbed on nanoporous nickel oxide electrodes and then studied by femtosecond transient absorption spectroscopy in the presence of a redox active electrolyte (I-3(-)/I-). In both compounds, upon excitation of the peryleneimide unit, an electron is efficiently ejected from the valence band of NiO to the dye with an average time constant of approximately 0.5 ps. In the case of the dyad, the excess electron is shifted further onto the naphtalenediimide unit, creating a new charge separated state. The latter exhibits a substantial retardation of the charge recombination between the hole and the reduced molecule compared with the peryleneimide sensitizer. The photoaction spectra of a sandwich dye-sensitized solar cell (DSSC) composed of NiO films and these new dyes were recorded, and the absorbed-photon to current conversion efficiency (APCE) was three times higher with the dyad than with the peryleneimide dye: 45%. The maximum APCE of approximately 45% is the highest value reported for a DSSC based on a nanostructured metal oxide p-type semiconductor.
|
|
| 9. |
- Sahlberg, Martin, 1981-
(författare)
-
Light-Metal Hydrides for Hydrogen Storage
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Demands for zero greenhouse-gas emission vehicles have sharpened with today’s increased focus on global warming. Hydrogen storage is a key technology for the implementation of hydrogen powered vehicles. Metal hydrides can claim higher energy densities than alternative hydrogen storage materials, but a remaining challenge is to find a metal hydride which satisfies all current demands on practical usability. Several metals store large amounts of hydrogen by forming a metal hydride, e.g., Mg, Ti and Al. The main problems are the weight of the material and the reaction energy between the metal and hydrogen. Magnesium has a high storage capacity (7.6 wt.% hydrogen) in forming MgH2; this is a slow reaction, but can be accelerated either by minimizing the diffusion length within the hydride or by changing the diffusion properties. Light-metal hydrides have been studied in this thesis with the goal of finding new hydrogen storage compounds and of gaining a better understanding of the parameters which determine their storage properties. Various magnesium-containing compounds have been investigated. These systems represent different ways to address the problems which arise in exploiting magnesium based materials. The compounds were synthesized in sealed tantalum tubes, and investigated by in situ synchrotron radiation X-ray powder diffraction, neutron powder diffraction, isothermal measurements, thermal desorption spectroscopy and electron microscopy. It is demonstrated that hydrogen storage properties can be improved by alloying magnesium with yttrium or scandium. Mg-Y-compounds decompose in hydrogen to form MgH2 nano-structures. Hydrogen desorption kinetics are improved compared to pure MgH2. The influence of adding a third element, gallium or zinc has also been studied; it is shown that gallium improves hydrogen desorption from YH2. ScAl1-xMgx is presented here for the first time as a hydrogen storage material. It absorbs hydrogen by forming ScH2 and Al(Mg) in a fully reversible reaction. It is shown that the hydrogen desorption temperature of ScH2 is reduced by more than 400 °C by alloying with aluminium and magnesium.
|
|
| 10. |
- Singh, Pradyumna S., et al.
(författare)
-
(I,0) Mixed-Valence State of a Diiron Complex with Pertinence to the [FeFe]-Hydrogenase Active Site : An IR, EPR, and Computational Study
- 2009
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 48:23, s. 10883-10885
-
Tidskriftsartikel (refereegranskat)abstract
- Biphenyl-2,2'-dithiolate (bpdt) bridged Fe-2(bpdt)(CO)(6) (1) undergoes two sequential electrochemically quasi-reversible reductions. The one-electron reduction product 1(-) is unusually stable against irreversible structural changes and could be characterized by IR and EPR spectroscopy supported by computational methods. Reduction to the (I,0) state does not trigger bridging coordination of CO but partial deligation of the dithiolate in 1(-) that ultimately forms a diamagnetic dimerization product.
|
|
