| 1. |
- Sundell, Jonas, 1984, et al.
(author)
-
Economic valuation of hydrogeological information when managing groundwater drawdown
- 2019
-
In: Hydrogeology Journal. - : Springer Science and Business Media LLC. - 1431-2174 .- 1435-0157. ; 27:4, s. 1111-1130
-
Journal article (peer-reviewed)abstract
- © 2019, The Author(s). A procedure is presented for valuation of information analysis (VOIA) to determine the need for additional information when assessing the effect of several design alternatives to manage future disturbances in hydrogeological systems. When planning for groundwater extraction and drawdown in areas where risks—such as land subsidence, wells running dry and drainage of streams and wetlands—are present, the need for risk-reducing safety measures must be carefully evaluated and managed. The heterogeneity of the subsurface calls for an assessment of trade-offs between the benefits of additional information to reduce the risk of erroneous decisions and the cost of collecting this information. A method is suggested that combines existing procedures for inverse probabilistic groundwater modelling with a novel method for VOIA. The method results in (1) a prior analysis where uncertainties regarding the efficiency of safety measures are estimated, and (2) a pre-posterior analysis, where the benefits of expected uncertainty reduction deriving from additional information are compared with the costs for obtaining this information. In comparison with existing approaches for VOIA, the method can assess multiple design alternatives, use hydrogeological parameters as proxies for failure, and produce spatially distributed VOIA maps. The method is demonstrated for a case study of a planned tunnel in Stockholm, Sweden, where additional investigations produce a low number of benefits as a result of low failure rates for the studied alternatives and a cause-effect chain where the resulting failure probability is more dependent on interactions within the whole system rather than on specific features.
|
|
| 2. |
- Sundell, Jonas, 1984, et al.
(author)
-
Comprehensive risk assessment of groundwater drawdown induced subsidence
- 2019
-
In: Stochastic Environmental Research and Risk Assessment. - : Springer Science and Business Media LLC. - 1436-3240 .- 1436-3259. ; 33:2, s. 427-449
-
Journal article (peer-reviewed)abstract
- © 2019, The Author(s). We present a method for risk assessment of groundwater drawdown induced land subsidence when planning for sub-surface infrastructure. Since groundwater drawdown and related subsidence can occur at large distances from the points of inflow, the large spatial extent often implies heterogeneous geological conditions that cannot be described in complete detail. This calls for estimation of uncertainties in all components of the cause-effect chain with probabilistic methods. In this study, we couple four probabilistic methods into a comprehensive model for economic risk quantification: a geostatistical soil-stratification model, an inverse calibrated groundwater model, an elasto-plastic subsidence model, and a model describing the resulting damages and costs on individual buildings and constructions. Groundwater head measurements, hydraulic tests, statistical analyses of stratification and soil properties and an inventory of buildings are inputs to the models. In the coupled method, different design alternatives for risk reduction measures are evaluated. Integration of probabilities and damage costs result in an economic risk estimate for each alternative. Compared with the risk for a reference alternative, the best prior alternative is identified as the alternative with the highest expected net benefit. The results include spatial probabilistic risk estimates for each alternative where areas with significant risk are distinguished from low-risk areas. The efficiency and usefulness of this modelling approach as a tool for communication to stakeholders, decision support for prioritization of risk reducing measures, and identification of the need for further investigations and monitoring are demonstrated with a case study of a planned railway tunnel in Varberg, Sweden.
|
|
| 3. |
- Dymitrow, Mirek, et al.
(author)
-
Crossing dichotomies and breaking mental patterns: Green business development when all else fails?
- 2017
-
In: 8th International Scientific Conference “Rural Development 2017: Bioeconomy Challenges”, 23–24 November, 2017 Kaunas, Lithuania.
-
Conference paper (other academic/artistic)abstract
- Obtaining sustainable and inclusive societal organization is not merely a simple matter of ‘doing it’ by subscribing to some winning formula. Given that conceptual frameworks always guide our thoughts, judgments and actions (Latour, 2013; Harvey, 1996; Dennett, 1993), the ways in which we relate to concepts chosen to serve as guiding forces for future development will eventually determine its outcome. As scholarly evidence continuously suggests the concepts ‘rural’ and ‘urban’ are increasingly recognized as artificial barriers for conducting sound and integrated development endeavors in a globalized reality of interconnectedness. In line with the Sustainable Development Goals, which aim to eradicate poverty, shield the planet and safeguard prosperity for all, commitment to universal access to healthy food year round has become an important agenda point. This, however, has been exacerbated by binary thinking and separate ways of doing policy. This paper aims to share experiences from a unique project launched in the northern parts of Gothenburg, Sweden’s second largest city. While the area offers ample resources and immense opportunities for areal economies, it at the same time remains one of Gothenburg’s most segregated, with high levels of unemployment, ill health and crime. The uniqueness of the project lies not only in its way of abridging the rural-urban divide, but also by consciously deferring from the debilitating rhetoric of previous ‘immigrant policies’, and instead focusing on agricultural productivity, small-scale food producers and sustainable food strategies. Such exhortations to bridge between philosophical and material polarities, however, have not come without conceptual and practical challenges, something this paper aims to subsume and open up to debate.
|
|
| 4. |
-
Bulletin of Geography. Socio-Economic Series (Volume 40)
- 2018
-
In: Bulletin of Geography. Socio-Economic Series (De Gruyter). - 1732-4254 .- 1732-4254. ; 40:40, s. 1-196
-
Other publication (other academic/artistic)abstract
- This 40th anniversary issue of BGSS highlights some of the tenets of the complexity that make sustainability a ‘wicked problem’ through a number of different perspectives, many of which have to date been pushed into the background amidst an otherwise exceptionally rich geographical literature on sustainability. The editorial task included procurement, administration and scientific processing of 12 articles from 25 authors as follows: (1) Mirek Dymitrow, Keith Halfacree – “Sustainability–differently”; (2) Slobodan Arsovski, Michał Kwiatkowski, Aleksandra Lewandowska, Dimitrinka Jordanova Peshevska, Emilija Sofeska, Mirek Dymitrow – “Can urban environmental problems be overcome? The case of Skopje—world’s most polluted city”; (3) Janis Birkeland – “Challenging policy barriers in sustainable urban design”; (4) Elizabeth Dessie – “Applying resilience thinking to ‘ordinary’ cities: A theoretical inquiry”; (5) Madeleine Eriksson, Aina Tollefsen – “The production of the rural landscape and its labour: The development of supply chain capitalism in the Swedish berry industry”; (6) Stina Hansson – “The role of trust in shaping urban planning in local communities: The case of Hammarkullen, Sweden”; (7) Shelley Kotze – “The place of community values within community-based conservation: The case of Driftsands Nature Reserve, Cape Town”; (8) Davide Marino, Luigi Mastronardi, Agostino Giannelli, Vincenzo Giaccio, Giampiero Mazzocchi – “Territorialisation dynamics for Italian farms adhering to Alternative Food Networks”; (9) E. Gunilla Almered Olsson – “Urban food systems as vehicles for sustainability transitions”; (10) George Mark Onyango – “Urban public transport in informal settlements: Experiences from Kisumu City, Kenya”; (11) Christian M. Rogerson – “Informality and migrant entrepreneurs in Cape Town’s inner city”; (12) Marcin Wójcik, Karolina Dmochowska-Dudek, Pamela Jeziorska-Biel, Paulina Tobiasz-Lis – “Understanding strategies for overcoming peripherality: A Polish experience of transition”. The articles have been reviewed by a cadre of 40 reviewers from 34 academic institutions across 14 countries.
|
|
| 5. |
- Stenis, Jan, 1960-, et al.
(author)
-
Flow analysis and economic modelling theory
- 2018
-
In: 18th International Multidisciplinary Scientific GeoConference and Mining Ecology Management, SGEM 2018. - Sofia : International Multidisciplinary Scientific Geoconference. - 9786197408485 ; , s. 389-394
-
Conference paper (peer-reviewed)abstract
- This study shows how material and immaterial flows can be analysed. The basis for the analysis is the equality principle and its mathematical expression the EUROPE model (the model for Efficient Use of Resources for Optimal Production Economy) which creates economic incentives to improve nature, advance the technological standard and increase profits. Particularly, the flows of cargo transportation, mega city supplies, long distance water transportation and various substance flows are described. The theoretical findings show viability for in general improving material and immaterial flows as well as the economy, the technological standard and the living conditions in the geographical regions in question. It is concluded that The EUROPE model based on the equality principle is in theory applicable on transportation policy issues, supplies to major cities, long distance water supply and important substance flows. In general, it is recommended to apply the EUROPE model when undertaking projects involving: transportation, mega city supply; transportation of water over long distances, and; flows of various substances.
|
|
| 6. |
- Belin, Matts-Åke, 1966-, et al.
(author)
-
Vision Zero : a road safety policy innovation
- 2012
-
In: International Journal of Injury Control and Safety Promotion. - : Informa UK Limited. - 1745-7319 .- 1745-7300. ; 19:2, s. 171-179
-
Journal article (peer-reviewed)
|
|
| 7. |
- Praetorius, Gesa, et al.
(author)
-
Resilience and complexity in a maritime service supply chain's everyday operation
- 2016
-
In: Service Supply Chain Systems. - London : CRC Press. - 9781138028296 - 9781315682143 ; , s. 121-137
-
Book chapter (peer-reviewed)abstract
- The maritime transport system is one of the major means for transporting goods as safely, efficiently and environmentally friendly as possible. In this system, ports rep-resent hubs connecting maritime to other transport modes such as railway, road and aviation. Therefore ports and their services can be considered as critical bottlenecks where operations need to be sustained in a large variety of operating conditions. This chapter presents an analysis of the Vessel Traffic Service (VTS), a maritime shore-based information service which is part of a port’s infrastructure. VTS is a key service in guar-anteeing safe, fluent and efficient traffic flows in and out of a port, therefore making it a crucial part of a port’s ability to provide a constant service performance despite the large uncertainties that are inherent to maritime operations. Functional Resonance Analysis Method (FRAM) is used to build a functional model of the VTS to analyse the system design and its impact on the service supply chain’s ability to operate in a resilient manner, i.e. being able to sustain required operations prior, during and after disturbances or changes of operating conditions. While the chapter focuses on the mar-itime domain, it also provides an example on how a function-based approach can be used to understand and design service supply chains with a focus on how they achieve successful adaption to the large variety of operating conditions.
|
|
| 8. |
- Cano-Viktorsson, Carlos, 1977-
(author)
-
From Maps to Apps : Tracing the Organizational Responsiveness of an Early Multi-Modal Travel Planning Service
- 2015
-
In: The Journal of urban technology. - London : Taylor & Francis. - 1063-0732 .- 1466-1853. ; 22:4, s. 87-101
-
Journal article (peer-reviewed)abstract
- An Internet-based system for informing on multimodal travel planning (several modes of transportation) was introduced in Stockholm, Sweden in October 2000 in the form of a web page called trafiken.nu. The web page has a historical value of being one of the first attempts in Europe, and possibly the world, at providing an ICT-based travel planning service geared towards facilitating sustainable travel to the general public. The aim of this article is to investigate the historical development of trafiken.nu in order to draw lessons on how to better provide for a public information service with a potential for facilitating sustainable travel planning. Findings from the study of trafiken.nu suggest that the organizations behind the service have been slow in adapting to shifting media technology practices on how to provide for information which has affected the uptake of the service. Lessons from the case study provide a basis for arguing that organizations attempting to implement public information services would benefit from finding a means of harnessing collective intelligence in order to provide for a more customizable and responsive service to the general public.
|
|
| 9. |
- Ribeiro, Luis, et al.
(author)
-
Industrial Agents for the Fast Deployment of Evolvable Assembly Systems
- 2015. - 1st ed.
-
In: Industrial Agents. - Amsterdam, Netherlands : Elsevier. - 9780128003411 ; , s. 301-321, s. 301-322
-
Book chapter (peer-reviewed)abstract
- The current manufacturing scenario is characterized by high market unpredictability. Agility is therefore a central challenge for modern companies that need to understand and be proactive towards their product offer in respect to “what is offered, when it is offered, where, how and by whom” (Brown & Bessant 2003).The “what” and the “when” are particularly relevant to the research in emerging paradigms as they account for variety, customization and volume; and timing, speed and seasonality (Brown & Bessant 2003).In this scenario, several design approaches and models have been proposed in the last decade to enable re-configurability and subsequently enhance the companies’ ability to adjust their offer in nature and time.From a paradigmatic point of view research has concentrated on the organizational structure of the shop-floor and the associated controls aspects. Concepts like Reconfigurable Manufacturing Systems (RMS) (Koren & Shpitalni 2010) and Fractal Factories (FF) (Montreuil 1999) support the physical construction of production systems by regulating their layout and making a few assumptions on their logical organization. On the other hand, concepts like Bionic Manufacturing Systems (BMS)(Ueda 1992), Holonic Manufacturing Systems (HMS)(Van Brussel et al. 1998), Evolvable Assembly Systems (Ribeiro et al. 2010) essentially provide the theoretical guidelines for the logical/computational organization of the system (see (Tharumarajah 1996) for a comparison between BMS, HMS and FF and (Setchi & Lagos 2004) for the rationale supporting the shift from Dedicated Lines to Flexible Manufacturing System and finally RMS).While these paradigms provide the conceptual framework and the main design guidelines their actual interpretation and implementation has led to a wider set of architectures (Monostori, Váncza & Kumara 2006; Leitão 2009; Parunak 2000; Pěchouček & Mařík 2008).These architectures align the high-level principles with the technological offer and limitations while seeking to address the re-configurability requirements of (Mehrabi, Ulsoy & Koren 2000; Rösiö & Säfsten 2013):module mobility – modules are easy and quick to move and install;“diagnosability” – it is quick to identify the sources of quality and reliability problems;“integrability” – modules are easy to integrate into the rest of the system.“convertibility” – it is easy and quick to switch between existing products and it is easy to adapt the system to future products;scalability – it is easy to enlarge and downsize the production system;“automatibility” – a dynamic level of automation is enabled;modularity – all system elements are designed to be modular;customization – the capability and flexibility of the production system is designed according to the products to be produced in the system.Instant deployment, as addressed in the present chapter directly addresses mobility, “integrability”, “convertibility”, scalability and customization. Mechatronic modularity is a prerequisite and is enforced by the proposed architecture and the considered modular design. “Diagnosability” was not specifically tackled.In this context, the chapter analyses the agent-based architecture related with the Instantly Deployable Evolvable Assembly System (IDEAS) project that is inspired by the Evolvable Assembly System (EAS) paradigm (Ribeiro et al. 2010) as a mechanism to enable fast deployment of mechatronic modules. EAS advocates the use of process-oriented modules and envisions the production system as a collection of processes and the associated interacting agents.The architecture and the related test cases are used to draw the main lessons learned in respect to technological and conceptual implications.In this context, the remainder of this text is organized as follows: section 1.1 discusses the main deployment challenges, section 1.2 details the reference architecture and associated concepts, section 1.3 presents the principal implementation decisions, section 1.4 features the main lessons learned, sections 1.5 discusses the benefits of the proposed approach and finally section 1.6 reflects on the main conclusions.
|
|
| 10. |
- Thunberg, Micael, 1986-, et al.
(author)
-
Categorising on-site problems : A supply chain management perspective on construction projects
- 2017
-
In: Construction Innovation. - : Emerald Group Publishing Limited. - 1471-4175 .- 1477-0857. ; 17:1, s. 90-111
-
Journal article (peer-reviewed)abstract
- Purpose - This study aims to identify and categorise common on-site problems from a supply chain management (SCM) perspective and to trace the origin of these problems in the construction project process, the supply chain or in the intersection between these processes. This allows for identification of how on-site problems affect SCM in construction projects and how they can be mitigated. Design/methodology/approach - A literature review in combination with semi-structured interviews was used to identify on-site problems. This enabled triangulation and strengthened both construct validity and internal validity. Findings - On-site problems can be categorised in one of the four following categories: material flows, internal communication, external communication or complexity. The first category has its origin in the supply chain, the second in the construction project process, the third in the supply chain-construction process intersection on site and the fourth in the construction project as a whole. The findings conclude that on-site problems often originate from construction companies' lack of supply chain orientation. Research limitations/implications - It is suggested that supply chain planning (SCP) can facilitate on-site problem mitigation in construction project management. This extends the body of knowledge of SCP in construction project management and supports the development of effective on-site construction project management. Practical implications - The results show that SCP can aid construction project management in handling on-site problems earlier in the project process. Originality/value - The main value lies in extending the body of knowledge in construction project management research by applying an SCM perspective and by introducing SCP to support more effective construction project management.
|
|
