| 1. |
- Almlöf, Martin, et al.
(författare)
-
Molecular dynamics study of heparin based coatings
- 2008
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 29:33, s. 4463-4469
-
Tidskriftsartikel (refereegranskat)abstract
- Heparin based surface coatings can be used to improve the biocompatibility of metallic surfaces such as vascular stents. Here, we report molecular dynamics simulations of a macromolecular conjugate of heparin used to prepare such surfaces. The structural properties of the heparin conjugate are investigated for different degrees of hydration, to allow comparison with spectroscopic results. The simulations show that the polymer becomes more compact with an increasing degree of inter-chain interactions as the hydration increases. This is also accompanied by changes in the interaction patterns among the heparin chains, where counter ions become looser associated with the disaccharide units and their strong interactions can be partly replaced by water molecules and heparin hydroxyl groups. The structural information that can be obtained from computer simulations of this type of coatings can be very valuable for understanding and further development of functional interfaces, since very little is known experimentally regarding their detailed structural properties. (C) 2008 Elsevier Ltd. All rights reserved.
|
|
| 2. |
- Arvidsson, Sara, 1977-, et al.
(författare)
-
Blood plasma contact activation on silicon, titanium and aluminium.
- 2007
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 28:7, s. 1346-54
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, blood plasma protein deposition to spontaneously air oxidized silicon, titanium and aluminium was re-investigated in vitro. Immunological- and null ellipsometry methods were used to detect and quantitate adsorbed proteins, RIA methods to study the retention of preadsorbed 125I-HSA upon exposure to buffer or blood plasma, and kallikrein-specific colorimetric substrate S-2302 to follow the surface generation of kallikrein. The results show that the contact activation of coagulation and complement systems are connected on Si and Ti, but not on Al, via coagulation factor XII. Preadsorbed 125I-HSA was most readily displaced on silicon, followed by titanium and aluminium. The surfaces displayed different antibody binding patterns after short and long-time exposures to plasma. Titanium and silicon bound anti-HMWK after 1 min in plasma, but aluminium did not. When the plasma incubation time was prolonged up to 2h the anti-HMWK binding disappeared totally on titanium and decreased on silicon. During the same time period, anti-C3c binding increased to the three types of surfaces. Also, the anti-C3c binding onto Si and Ti, but not Al, disappeared after incubation in Factor XII deficient plasma or when a specific coagulation factor XII (Factor XII) inhibitor, corn trypsin inhibitor (CTI) was added to normal plasma. The surface contacted plasmas cleaved the kallikrein-specific reagent S-2302 both after single surface contact, and after reincubation of surfaces in fresh plasma. The results show that C3b and Factor XIIa and their degradation products were retained at the surfaces.
|
|
| 3. |
- Bäck, Jennie, et al.
(författare)
-
Distinctive regulation of contact activation by antithrombin and C1-inhibitor on activated platelets and material surfaces
- 2009
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 30:34, s. 6573-6580
-
Tidskriftsartikel (refereegranskat)abstract
- Activated human plate lets trigger FXII-mediated contact activation, which leads to the generation of FXIIa-antithrombin (AT) and FXIa-AT complexes. This suggests that contact activation takes place at different sites, on activated platelets and material surfaces, during therapeutic procedures involving biomaterials in contact with blood and is differentially regulated. Here we show that activation in platelet-poor plasma, platelet-rich plasma (PRP), and whole blood induced by glass, kaolin, and polyphosphate elicited high levels of FXIIa-C1-inhibitor (C1INH), low levels of FXIa-C1INH and KK-C1INH, and almost no AT complexes. Platelet activation, in both PRP and blood, led to the formation of FXIIa-AT, FXIa-AT, and kallikrein (KK)-AT but almost no C1INH complexes. In severe trauma patients, FXIIa-AT and FXIa-AT were correlated with the release of thrombospondin-1 (TSP-1) from activated platelets. In contrast, FXIIa-C1INH complexes were detected when the FXIIa-AT levels were low. No correlations were found between FXIIa-C1INH and FXIIa-AT or TSP-1. Inhibition of FXIIa on material surfaces was also shown to affect the function of aggregating platelets. In conclusion, formation of FXIIa-AT and FXIIa-C1INH complexes can help to distinguish between contact activation triggered by biomaterial surfaces and by activated platelets. Platelet aggregation studies also demonstrated that platelet function is influenced by material surface-mediated contact activation and that generation of FXIIa-AT complexes may serve as a new biomarker for thrombotic reactions during therapeutic procedures employing biomaterial devices.
|
|
| 4. |
- Bäckdahl, Henrik, 1977, et al.
(författare)
-
Mechanical properties of bacterial cellulose and interactions with smooth muscle cells
- 2006
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 27:9, s. 2141-2149
-
Tidskriftsartikel (refereegranskat)abstract
- Tissue engineered blood vessels (TEBV) represent an attractive approach for overcoming reconstructive problems associated with vascular diseases by providing small calibre vascular grafts. The aim of this study has been to evaluate a novel biomaterial, bacterial cellulose (BC), as a potential scaffold for TEBV. The morphology of the BC pellicle grown in static culture was investigated with SEM. Mechanical properties of BC were measured in Krebs solution and compared with the properties of porcine carotid arteries and ePTFE grafts. Attachment, proliferation and ingrowth of human smooth muscle cells (SMC) on the BC were analysed in vitro. The BC pellicle had an asymmetric structure composed of a fine network of nanofibrils similar to a collagen network. The shape of the stress-strain response of BC is reminiscent of the stress-strain response of the carotid artery, most probably due to the similarity in architecture of the nanofibrill networks. SMC adhered to and proliferated on the BC pellicle; an ingrowth of up to 40 microm was seen after 2 weeks of culture. BC exhibit attractive properties for use in future TEBV.
|
|
| 5. |
|
|
| 6. |
- Constantinidis, Ioannis, et al.
(författare)
-
Non-invasive evaluation of alginate/poly-L-lysine/alginate microcapsules by magnetic resonance microscopy
- 2007
-
Ingår i: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 28:15, s. 2438-2445
-
Tidskriftsartikel (refereegranskat)abstract
- In this report, we present data to demonstrate the utility of H-1 MR microscopy to non-invasively examine alginate/poly-L-lysine/ alginate (APA) microcapsules. Specifically, high-resolution images were used to visualize and quantify the poly-L-lysine (PLL) layer, and monitor temporal changes in the alginate gel microstructure during a month long in vitro culture. The thickness of the alginate/PLL layer was quantified to be 40.6 +/- 6.2 mu m regardless of the alginate composition used to generate the beads or the time of alginate/PLL interaction (2, 6, or 20 min). However, there was a notable difference in the contrast of the PLL layer that depended upon the guluronic content of the alginate and the alginate/PLL interaction time. The T-2 relaxation time and the apparent diffusion coefficient (ADC) of the alginate matrix were measured periodically throughout the month long culture period. Alginate beads generated with a high guluronic content alginate demonstrated a temporal decrease in T-2 over the duration of the experiment, while ADC was unaffected. This decrease in T-2 is attributed to a reorganization of the alginate microstructure due to periodic media exchanges that mimicked a regular feeding regiment for cultured cells. In beads coated with a PLL layer, this temporal decrease in T-2 was less pronounced suggesting that the PLL layer helped maintain the integrity of the initial alginate microstructure. Conversely, alginate beads generated with a high mannuronic content alginate (with or without a PLL layer) did not display temporal changes in either T-2 or ADC. This observation suggests that the microstructure of high mannuronic content alginate beads is less susceptible to culture conditions.
|
|
| 7. |
- Duan, Xiaodong, et al.
(författare)
-
Biofunctionalization of collagen for improved biological response: Scaffolds for corneal tissue engineering
- 2007
-
Ingår i: Biomaterials. - : Elsevier. - 0142-9612 .- 1878-5905. ; 28:1, s. 78-88
-
Tidskriftsartikel (refereegranskat)abstract
- Residual dendrimer amine groups were modified with incorporate COOH group containing biomolecules such as cell adhesion peptides into collagen scaffolds. YIGSR, as a model cell adhesion peptide, was incorporated into both the bulk structure of the gels and onto the gel surface. The effects of the peptide modified collagen gets on corneal epithelial cell behavior were examined with an aim of improving the potential of these materials as tissue-engineering scaffolds. YIGSR was first chemically attached to dendrimers and the YIGSR attached dendrimers were then used as collagen crosslinkers, incorporating the peptide into the bulk structure of the collagen gels. YIGSR was also attached to the surface of dendrimer crosslinked collagen gels through reaction with excess amine groups. The YIGSR modified dendrimers were characterized by H-NMR and MALDI mass spectra. The amount of YIGSR incorporated into collagen gels was determined by (125)1 radiolabelling at maximum to be 3.1-3.4 x 10(-2)mg/mg collagen when reacted with the bulk and 88.9-95.6 mu g/cm(2) when attached to the surface. The amount of YIGSR could be tuned by varying the amount of peptide reacted with the dendrimer or the amount of modified dendrimer used in the crosslinking reaction. It was found that YIGSR incorporation into the bulk and YIGSR modification of surface promoted the adhesion and proliferation of human corneal epithelial cells as well as neurite extension from dorsal root ganglia. (c) 2006 Elsevier Ltd. All rights reserved.
|
|
| 8. |
- Engberg, Anna E., 1982-, et al.
(författare)
-
Inhibition of complement activation on a model biomaterial surface by streptococcal M protein-derived peptides
- 2009
-
Ingår i: Biomaterials. - : Elsevier. - 0142-9612 .- 1878-5905. ; 30:13, s. 2653-2659
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to evaluate a new approach to inhibit complement activation triggered by biomaterial surfaces in contact with blood. In order to inhibit complement activation initiated by the classical pathway (CP), we used streptococcal M protein-derived peptides that specifically bind human C4BP, an inhibitor of the CP. The peptides were used to coat polystyrene microtiter wells which served as a model biomaterial. The ability of coated peptides to bind C4BP and to attenuate complement activation via the CP (monitored as generation of fluid-phase C3a and binding of fragments of C3 and C4 to the surface) was investigated using diluted normal human serum, where complement activation by the AP is minimal, as well as serum from a patient lacking alternative pathway activation. Complement activation (all parameters) was significantly decreased in serum incubated in well surfaces coated with peptides. Total inhibition of complement activation was obtained at peptide coating concentrations as low as 1-5 mu g/mL. Successful use of Streptococcus-derived peptides shows that it is feasible to control complement activation at a model biomaterial surface by capturing autologous complement regulatory molecules from plasma. (C) 2009 Elsevier Ltd. All rights reserved.
|
|
| 9. |
- Eriksson Linsmeier, Cecilia, et al.
(författare)
-
Soft tissue reactions evoked by implanted gallium phosphide.
- 2008
-
Ingår i: Biomaterials. - : Elsevier BV. - 1878-5905 .- 0142-9612. ; 29:35, s. 4598-4604
-
Tidskriftsartikel (refereegranskat)abstract
- Neural devices may play an important role in the diagnosis and therapy of several clinical conditions, such as stroke, trauma or neurodegenerative disorders, by facilitating motor and pain control. Such interfaces, chronically implanted in the CNS, need to be biocompatible and have the ability to stimulate and record nerve signals. However, neural devices of today are not fully optimized. Nanostructured surfaces may improve electrical properties and lower evoked tissue responses. Vertical gallium phosphide (GaP) nanowires epitaxially grown from a GaP surface is one way of creating nanostructured electrodes. Thus, we chose to study the soft tissue reactions evoked by GaP surfaces. GaP and the control material titanium (Ti) were implanted in the rat abdominal wall for evaluation of tissue reactions after 1, 6, or 12 weeks. The foreign-body response was evaluated by measuring the reactive capsule thickness and by quantification of ED1-positive macrophages and total cells in the capsule. Furthermore, the concentration of Ga was measured in blood, brain, liver and kidneys. Statistically significant differences were noticed between GaP and Ti at 12 weeks for total and ED1-positive cell densities in the capsule. The chemical analysis showed that the concentration of Ga in brain, liver and kidneys increased during 12 weeks of implantation, indicating loss of Ga from the implant. Taken together, our results show that the biocompatible properties of GaP are worse than those of the well-documented biomaterial Ti.
|
|
| 10. |
- Gallagher, William M., et al.
(författare)
-
Molecular basis of cell-biomaterial interaction: Insights gained from transcriptomic and proteomic studies
- 2006
-
Ingår i: Biomaterials. - : Elsevier BV. - 1878-5905 .- 0142-9612. ; 27:35, s. 5871-5882
-
Forskningsöversikt (refereegranskat)abstract
- With the growing interest in clinical interventions that involve medical devices, the role for new biomaterials in modern medicine is currently expanding at a phenomenal rate. Failure of most implant materials stems from an inability to predict and control biological phenomena, such as protein adsorption and cell interaction, resulting in an inappropriate host response to the materials. Contemporary advances in biological investigation are starting to shift focus in the biomaterials field, in particular with the advent of high-throughput methodologies for gene and protein expression profiling. Here, we examine the role that emerging transcriptomic and proteomic technologies could play in relation to biomaterial development and usage. Moreover, a number of studies are highlighted which have utilized such approaches in order to try to create a deeper understanding of cell-biomaterial interactions and, hence, improve our ability to predict and control the biocompatibility of new materials. (c) 2006 Elsevier Ltd. All rights reserved.
|
|
