| 1. |
- Andersen, C. E., et al.
(författare)
-
An algorithm for real-time dosimetry in intensity-modulated radiation therapy using the radioluminescence signal from Al2O3 : C
- 2006
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 1742-3406 .- 0144-8420. ; 120:1-4, s. 41468-41468
-
Tidskriftsartikel (refereegranskat)abstract
- Although the radioluminescence (RL) signal from optical fibre Al2O3:C dosemeters used in medical applications is essentially proportional to dose rate, the crystals used so far are imperfect in the sense that their RL sensitivity changes with accumulated dose. A computational algorithm has been developed that corrects for these sensitivity changes. We further report on a new system that effectively separates the RL signal generated in the crystal from fluorescence and Cerenkov emission generated in the optical fibre cable using a gating technique in connection with pulsed linear accelerator radiation beams. The dosimetry system has been used for dose measurements in a phantom during an intensity-modulated radiation therapy (IMRT) treatment with 6 MV photons. The RL measurement results are in excellent agreement (i.e. within 1%) with both the OSL results and the dose delivered according to the treatment planning system. RL signals from Al2O3:C can be used for real-time dose rate measurements with a time resolution of similar to 0.1 s and a spatial resolution only limited by the size of the detector (< 0.5 mm).
|
|
| 2. |
- Aznar, Marianne C., et al.
(författare)
-
A Monte Carlo study of the energy dependence of Al2O3:C crystals for real-time in vivo dosimetry in mammography
- 2005
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 114:Nos 1-3, s. 444-449
-
Tidskriftsartikel (refereegranskat)abstract
- In a previous experimental study, a novel method for in vivo dosimetry has been investigated, based on radioluminescence (RL) and optically stimulated luminescence (OSL). However, because of the large difference in atomic composition between the detector material and the breast tissue, relatively large energy dependence in low-energy X-ray beams can be expected. In the present work, the energy dependence of Al2O3:C crystals was modelled with the Monte Carlo code EGSnrc using three types of X-ray spectra. The results obtained (5.6-7.3%) agree with a previously determined experimental result (9%) within the combined standard uncertainty of the two methods. The influence of the size of the crystal on the energy dependence was investigated together with the effect of varying the thickness of the surrounding light-protective material. The results obtained indicate a minor effect owing to the thickness of the light-protective material, and a somewhat larger effect from reducing the diameter of the crystal. The outcome of this study can be used to improve the future design of the RL/OSL dosimetry system for use in mammography.
|
|
| 3. |
- Bahar Gogani, Jalil, 1967-, et al.
(författare)
-
Assessment of correlated dose and sensitivity profiles on a multi-slice CT scanner
- 2005
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 114:1-3, s. 332-336
-
Tidskriftsartikel (refereegranskat)abstract
- In the case of computed tomography (CT) scanners as well as other imaging techniques utilising ionising radiation, it is imperative that radiation is confined to the sensitive part of the image detector. Assuring this for a CT scanner requires detailed information about the scanner dose and sensitivity profiles and their spatial correlation. The profiles should ideally be co-centric and tightly fit to each other. Ensuring this inherent performance of the scanner can be seen as one of the fundamental steps in optimising diagnostic examinations with CT. A measurement device using a dedicated liquid ionisation chamber is employed to investigate the performance of a Toshiba Aquilion 16 scanner in this aspect. Dose profile and sensitivity profile pairs for four collimations are presented where each pair of profiles are spatially correlated to each other. The measurement device can be applied to any scanner for fast and accurate assessment of dose and sensitivity profiles and their spatial correlation. © The Author 2005. Published by Oxford University Press. All rights reserved.
|
|
| 4. |
|
|
| 5. |
- Bilski, P., et al.
(författare)
-
The problems associated with the monitoring of complex workplace radiation fields at European high-energy accelerators and thermonuclear fusion facilities
- 2007
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 126:1-4, s. 491-496
-
Tidskriftsartikel (refereegranskat)abstract
- The European Commission is funding within its Sixth Framework Programme a three-year project (2005-2007) called CONRAD, COordinated Network for RAdiation Dosimetry. The organisational framework for this project is provided by the European Radiation Dosimetry Group EURADOS. One task within the CONRAD project, Work Package 6 (WP6), was to provide a report outlining research needs and research activities within Europe to develop new and improved methods and techniques for the characterisation of complex radiation fields at workplaces around high-energy accelerators, but also at the next generation of thermonuclear fusion facilities. The paper provides an overview of the report, which will be available as CERN Yellow Report.
|
|
| 6. |
- Blomgren, Jan
(författare)
-
Fast neutron beams - Prospects for the coming decade
- 2007
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 126:1-4, s. 64-68
-
Tidskriftsartikel (refereegranskat)abstract
- The present status of neutron beam production techniques above 20 MeV is discussed. Presently, two main methods are used; white beams and quasi-monoenergetic beams. The performances of these two techniques are discussed, as well as the use of such facilities for measurements of nuclear data for fundamental and applied research. Recently, two novel ideas on how to produce extremely intense neuton beams in the 100-500 MeV range have been proposed. Decay in flight of beta delayed neutron-emitting nuclei could provide beam intensities five orders of magnitudes larger than present facilities. A typical neutron energy spectrum would be essentially monoenergetic, i.e., the energy spread is about 1 MeV with essentially no lowenergy tail. A second option would be to produce beams of He-6 and dissociate the 6 He nuclei into alpha particles and neutrons. The basic features of these concepts are outlined, and the potential for improved nuclear data research is discussed.
|
|
| 7. |
- Blomgren, Jan, et al.
(författare)
-
Progress in Dosimetry of Neutrons and Light Nuclei
- 2007
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 126:1-4, s. 1-2
-
Forskningsöversikt (övrigt vetenskapligt/konstnärligt)
|
|
| 8. |
|
|
| 9. |
- Boson, Jonas, 1976-, et al.
(författare)
-
Uncertainty in HPGe detector calibrations for in situ gamma-ray spectrometry
- 2009
-
Ingår i: Radiation Protection Dosimetry. - : Oxford University Press. - 0144-8420 .- 1742-3406. ; 134:2, s. 122-129
-
Tidskriftsartikel (refereegranskat)abstract
- Semi-empirical methods are often used for efficiency calibrations of in situ gamma-ray spectrometry measurements with high-purity germanium detectors. The intrinsic detector efficiency is experimentally determined for different photon energies and angles of incidence, and a suitable expression for the efficiency is fitted to empirical data. In this work, the combined standard uncertainty of such an efficiency function for two detectors was assessed. The uncertainties in individual efficiency measurements were found to be about 1.9 and 3.1% (with a coverage factor k = 1, i.e. with a confidence interval of about 68%) for the two detectors. The main contributions to these uncertainties were found to originate from uncertainties in source-to-detector distance, source activity and full-energy peak count rate. The standard uncertainties of the fitted functions were found to be somewhat higher than the uncertainty of individual data points, i.e. 5.2 and 8.1% (k = 1). With the introduction of a new expression for the detector efficiency, these uncertainties were reduced to 3.7 and 4.2%, i.e. with up to a factor of two. Note that this work only addresses the uncertainty in the determination of intrinsic detector efficiency.
|
|
| 10. |
- Båth, Magnus, 1974, et al.
(författare)
-
A conceptual optimisation strategy for radiography in a digital environment.
- 2005
-
Ingår i: Radiation protection dosimetry. - : Oxford University Press (OUP). - 0144-8420 .- 1742-3406. ; 114:1-3, s. 230-5
-
Tidskriftsartikel (refereegranskat)abstract
- Using a completely digital environment for the entire imaging process leads to new possibilities for optimisation of radiography since many restrictions of screen/film systems, such as the small dynamic range and the lack of possibilities for image processing, do not apply any longer. However, at the same time these new possibilities lead to a more complicated optimisation process, since more freedom is given to alter parameters. This paper focuses on describing an optimisation strategy that concentrates on taking advantage of the conceptual differences between digital systems and screen/film systems. The strategy can be summarised as: (a) always include the anatomical background during the optimisation, (b) perform all comparisons at a constant effective dose and (c) separate the image display stage from the image collection stage. A three-step process is proposed where the optimal setting of the technique parameters is determined at first, followed by an optimisation of the image processing. In the final step the optimal dose level-given the optimal settings of the image collection and image display stages-is determined.
|
|
