| 1. |
- Adamopoulos, Othon, et al.
(författare)
-
Nanostructured bioceramics for maxillofacial applications
- 2007
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 18:8, s. 1587-1597
-
Tidskriftsartikel (refereegranskat)abstract
- Biomaterials science and technology have been expanding tremendously the recent years. The results of this evolution are obvious in maxillofacial applications especially with the contemporary development of Nanotechnology. Among biomaterials, bioceramics possess a specific field due to various interactions with the biological tissues. The combination of bioceramics and nanotechnology has resulted in enhanced skeletal interactions in maxillofacial applications. Nanotechnology secures better mechanical properties and more effective biological interactions with jaws. The main production methods for the synthesis of nanostructured materials include plasma arcing. chemical vapour deposition, sol-gel and precipitation. The bioceramics in Dentistry comprise inert, bioactive, resorbable and composite systems. The purpose of the present article is to describe the available nanotechnology methods and how these could be addressed to synthesise maxillofacial bioceramics with advanced properties for better biological applications. Additionally, it describes specific clinical applications in maxillofacial surgery of these biomaterials-either by themselves or in combination with others-that can be promising candidates for bone tissue engineering. Such applications include replacement of lost teeth, filling of jaws defects or reconstruction of mandible and temporomandibular joint.
|
|
| 2. |
|
|
| 3. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Formation of calcium phosphates on titanium implants with four different bioactive surface preparations. An in vitro study
- 2007
-
Ingår i: Journal of Materials Science-Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 18:10, s. 1945-1954
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to compare the nucleating and growing behaviour on four types of bioactive surfaces by using the simulated body fluid (SBF) model. Titanium discs were blasted and then prepared by alkali and heat treatment, anodic oxidation, fluoridation, or hydroxyapatite coating. The discs were immersed in SBF for 1, 2, 4 and 6 weeks. Calcium phosphates were found on all specimens, as analysed with scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX). After 1 and 2 weeks of SBF immersion more titanium was accessible with SEM/EDX on the blasted surfaces than the four bioactive surface types, indicating a difference in coverage by calcium phosphates. The Ca/P mean ratio of the surfaces was approximately 1.5 after 1 week, in contrast to the fluoridated specimens which displayed a Ca/P mean ratio of approximately 2. Powder X-ray diffraction (P-XRD) analyses showed the presence of hydroxyapatite on all types of surfaces after 4 and 6 weeks of immersion. The samples immersed for 6 weeks showed a higher degree of crystallinity than the samples immersed for 4 weeks. In conclusion, differences appeared at the early SBF immersion times of 1 and 2 weeks between controls and bioactive surface types, as well as between different bioactive surface types.
|
|
| 4. |
- Arvidsson, Anna, 1973, et al.
(författare)
-
Nucleation and growth of calcium phosphates in the presence of fibrinogen on titanium implants with four potentially bioactive surface preparations. An in vitro study.
- 2009
-
Ingår i: Journal of Materials Science: Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 20:9, s. 1869-1879
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract The aim of this study was to compare the nucleating and crystal growth behaviour of calcium phosphates on four types of potentially bioactive surfaces, using the simulated body fluid (SBF) model with added fibrinogen. Blasted titanium discs were modified by alkali and heat treatment, anodic oxidation, fluoride treatment, or hydroxyapatite coating. The discs were immersed in SBF with fibrinogen for periods of 3 days and 1, 2, 3 and 4 weeks. The topography, morphology, and chemistry of the surfaces were evaluated with optical interferometry, scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX), and x-ray photoelectron spectroscopy (XPS), respectively. All surface modifications showed early calcium phosphate formation after 3 days, and were almost completely covered by calcium phosphates after 2 weeks. After 4 weeks, the Ca/P ratio was approximately 2.0 for all surface groups except the fluoride modified surface, which had a Ca/P ratio of 1.0–1.5. XPS measurements of the nitrogen concentration, which can be interpreted as an indirect measure of the protein content, reached a peak value after 3 days immersion and decreased thereafter. In conclusion, the results in the present study, when compared to earlier SBF studies without proteins, showed that fibrinogen stimulates calcium phosphates formation. Furthermore, no pronounced differences could be detected between blasted controls and the potentially bioactive specimens.
|
|
| 5. |
- Ballerini, Lucia, et al.
(författare)
-
Comparison of histomorphometrical data obtained with two different image analysis methods
- 2007
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer. - 0957-4530 .- 1573-4838. ; 18:8, s. 1471-1479
-
Tidskriftsartikel (refereegranskat)abstract
- A common way to determine tissue acceptance of biomaterials is to perform histomorphometrical analysis on histologically stained sections from retrieved samples with surrounding tissue, using various methods. The “time and money consuming” methods and techniques used are often “in house standards”. We address light microscopic investigations of bone tissue reactions on un-decalcified cut and ground sections of threaded implants. In order to screen sections and generate results faster, the aim of this pilot project was to compare results generated with the in-house standard visual image analysis tool (i.e., quantifications and judgements done by the naked eye) with a custom made automatic image analysis program. The histomorphometrical bone area measurements revealed no significant differences between the methods but the results of the bony contacts varied significantly. The raw results were in relative agreement, i.e., the values from the two methods were proportional to each other: low bony contact values in the visual method corresponded to low values with the automatic method. With similar resolution images and further improvements of the automatic method this difference should become insignificant. A great advantage using the new automatic image analysis method is that it is time saving—analysis time can be significantly reduced.
|
|
| 6. |
- Borzacchiello, A, et al.
(författare)
-
Evaluation of injection augmentation treatment of hyaluronic acid based materials on rabbit vocal folds viscoelasticity.
- 2005
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 16:6, s. 553-557
-
Tidskriftsartikel (refereegranskat)abstract
- For patients with type 1 Gaucher disease, challenges to patient care posed by clinical heterogeneity, variable progression rates, and potential permanent disability that can result from untreated or suboptimally treated hematologic, skeletal, and visceral organ involvement dictate a need for comprehensive, serial monitoring. An updated consensus on minimum recommendations for effective monitoring of all adult patients with type 1 Gaucher disease has been developed by the International Collaborative Gaucher Group (ICGG) Registry coordinators. These recommendations provide a schedule for comprehensive and reproducible evaluation and monitoring of all clinically relevant aspects of this disease. The initial assessment should include confirmation of deficiency of beta-glucocerebrosidase, genotyping, and a complete family medical history. Other assessments to be performed initially and at regular intervals include a complete physical examination, patient-reported quality of life using the SF-36 survey, and assessment of hematologic (hemoglobin and platelet count), visceral, and skeletal involvement, and biomarkers. Specific radiologic imaging techniques are recommended for evaluating visceral and skeletal pathology. All patients should undergo comprehensive regular assessment, the frequency of which depends on treatment status and whether therapeutic goals have been achieved. Additionally, reassessment should be performed whenever enzyme therapy dose is altered, or in case of significant clinical complication.
|
|
| 7. |
- Brohede, Ulrika, et al.
(författare)
-
Multifunctional implant coatings providing possibilities for fast antibiotics loading with subsequent slow release
- 2009
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 20:9, s. 1859-1867
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility to fast-load biomimetic hydroxyapatite coatings on surgical implant with the antibiotics Amoxicillin, Gentamicin sulfate, Tobramycin and Cephalothin has been investigated in order to develop a multifunctional implant device offering sustained local anti-bacterial treatment and giving the surgeon the possibility to choose which antibiotics to incorporate in the implant at the site of surgery. Physical vapor deposition was used to coat titanium surfaces with an adhesion enhancing gradient layer of titanium oxide having an amorphous oxygen poor composition at the interface and a crystalline bioactive anatase TiO2 composition at the surface. Hydroxyapatite (HA) was biomimetically grown on the bioactive TiO2 to serve as a combined bone in-growth promoter and drug delivery vehicle. The coating was characterized using scanning and transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The antibiotics were loaded into the HA coatings via soaking and the subsequent release and antibacterial effect were analyzed using UV spectroscopy and examination of inhibition zones in a Staphylococcus aureus containing agar. It was found that a short drug loading time of 15 min ensured antibacterial effects after 24 h for all antibiotics under study. It was further found that the release processes of Cephalothin and Amoxicillin consisted of an initial rapid drug release that varied unpredictably in amount followed by a reproducible and sustained release process with a release rate independent of the drug loading times under study. Thus, implants that have been fast-loaded with drugs could be stored for ~10 min in a simulated body fluid after loading to ensure reproducibility in the subsequent release process. Calculated release rates and measurements of drug amounts remaining in the samples after 22 h of release indicated that a therapeutically relevant dose could be achieved close to the implant surface for about 2 days. Concluding, the present study provides an outline for the development of a fast-loading slow-release surgical implant kit where the implant and the drug are separated when delivered to the surgeon, thus constituting a flexible solution for the surgeon by offering the choice of quick addition of antibiotics to the implant coating based on the patient need.
|
|
| 8. |
- Emami, Nazanin, et al.
(författare)
-
Influence of light-curing procedures and photo-initiator/co-initiator composition on the degree of conversion of light-curing resins
- 2005
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 16:1, s. 47-52
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The hypothesis that the degree and rate of conversion can be modified favourably by using different light-curing procedures and different photo initiator/co-initiator combinations was tested.Method: A photo-initiator (0.02 mM/g resin); either camphorquinone (CQ) or 1-phenyl-1,2-propanedione (PPD), was mixed with bisGMA:TEGDMA (50:50 by weight). In addition, a co-initiator (0.04 mM/g resin); either N,N-dimethyl-p-aminobenzoic acid ethylester (DABE), N,N-cyanoethylmethylaniline (CEMA), or 2-dimethylaminoethyl methacrylate (DMAEMA), was added. These six combinations were subjected to three curing conditions (standard curing, soft-start curing or LED curing). The conversion levels (DC) were determined with differential scanning calorimetry (DSC). The DSC results were analysed using a general linear model (GLM) and Duncans multiple range test and regular t-test.Results: The fastest conversion initially was obtained by standard curing, followed by LED curing and soft-start curing. After 40 s of curing, conventional curing and soft-start curing produced a higher DC than LED curing. However, strong interactions occurred between the different variables (curing method, initiator and co-initiator). Initially, CQ was more efficient than PPD, but after 40 s, this difference was insignificant.Conclusion: By using soft-start curing and an appropriate photo initiator/co-initiator combination it is possible to achieve slow curing and a high DC at within a curing time of 40 s.
|
|
| 9. |
|
|
| 10. |
- Ferraz, Natalia, et al.
(författare)
-
Influence of nanoporesize on platelet adhesion and activation
- 2008
-
Ingår i: Journal of materials science. Materials in medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 19:9, s. 3115-21
-
Tidskriftsartikel (refereegranskat)abstract
- In this study we have evaluated the influence of biomaterial nano-topography on platelet adhesion and activation. Nano-porous alumina membranes with pore diameters of 20 and 200 nm were incubated with whole blood and platelet rich plasma. Platelet number, adhesion and activation were determined by using a coulter hematology analyzer, scanning electron microscopy, immunocytochemical staining in combination with light microscopy and by enzyme immunoassay. Special attention was paid to cell morphology, microparticle generation, P-selectin expression and beta-TG production. Very few platelets were found on the 200 nm alumina as compared to the 20 nm membrane. The platelets found on the 20 nm membrane showed signs of activation such as spread morphology and protruding filipodia as well as P-selectin expression. However no microparticles were detected on this surface. Despite the fact that very few platelets were found on the 200 nm alumina in contrast to the 20 nm membrane many microparticles were detected on this surface. Interestingly, all microparticles were found inside circular shaped areas of approximately 3 mum in diameter. Since this is the approximate size of a platelet we speculate that this is evidence of transient, non-adherent platelet contact with the surface, which has triggered platelet microparticle generation. To the authors knowledge, this is the first study that demonstrates how nanotexture can influence platelet microparticle generation. The study highlights the importance of understanding molecular and cellular events on nano-level when designing new biomaterials.
|
|
