| 1. |
|
|
| 2. |
|
|
| 3. |
- Bylund, Sonya H, et al.
(författare)
-
A descriptive study of women injured by hand-arm vibration
- 2002
-
Ingår i: Annals of Occupational Hygiene. - 0003-4878 .- 1475-3162. ; 46:3, s. 299-307
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to describe the symptoms and the prognosis of vibration injuries in women. The investigation was based on a study of 374 women who had reported an injury due to hand-arm vibration to the Social Insurance Office or had received financial compensation from the Swedish Labor Market Insurance scheme during 1988-1997. Information on, for example, self-rated health symptoms and vibration exposure was collected by means of a questionnaire. On average, the first symptoms started after 7 yr of exposure and the first visit to a doctor took place after 11 yr. Neurological symptoms developed after a shorter period of exposure compared to vascular symptoms, 6.8 and 9.2 yr, respectively. The prevalence of numbness at the time of reporting the injury was 91% and the prevalence of white fingers was reported by 54%. The occupational group with the highest prevalence of vibration injuries was dental technicians. Two thirds of the women had stopped using vibrating machines in their work. Among the women who suffered from white fingers when they reported the injury, 50% declared impairment or no improvement of the symptoms. One woman in five was retired and the same number of women had retrained due to the occupational injury.
|
|
| 4. |
- Edman, Katja, et al.
(författare)
-
Exposure assessment to alpha- and beta-pinene, delta(3)-carene and wood dust in industrial production of wood pellets
- 2003
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 47:3, s. 219-226
-
Tidskriftsartikel (refereegranskat)abstract
- The main aim of the study was to measure the exposure to monoterpenes (alpha- and beta-pinene and Delta(3)-carene) and wood dust during industrial production of wood pellets and briquettes. Additional aims were to compare the results from wood dust sampled on a filter with real time measurements using a direct reading instrument and to identify peak exposures to dust. Twenty-four men working at six companies involved in industrial production of wood pellets and briquettes participated in the study. Monoterpenes were measured by diffusive sampling and wood dust was measured as total dust. A data logger (DataRAM) was used for continuous monitoring of dust concentration for 18 of the participants. The sampling time was approximately 8 h. The personal exposure to monoterpenes ranged from 0.64 to 28 mg/m(3) and a statistically significant (Kruskal-Wallis test, P = 0.0002) difference in levels of monoterpenes for workers at different companies was seen. In the companies the personal exposure to wood dust varied between 0.16 and 19 mg/m(3) and for 10 participants the levels exceeded the present Swedish occupational exposure limit (OEL) of 2 mg/m(3). The levels of wood dust during the morning shift were significantly (Mann-Whitney test, P = 0.04) higher compared with the afternoon shift. Continuous registration of dust concentration showed peak values for several working operations, especially cleaning of truck engines with compressed air. For 24 workers in six companies involved in industrial production of wood pellets the personal exposure to monoterpenes was low and to wood dust high compared with the present Swedish OEL and previous studies in Swedish wood industries. Since the DataRAM can identify critical working tasks with high wood dust exposure a reduction in exposure levels could probably be achieved by changes in working routines and by the use of protective equipment
|
|
| 5. |
- Eriksson, Kåre, et al.
(författare)
-
Dermal exposure to styrene in the fibreglass reinforced plastics industry.
- 2004
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 48:3, s. 203-8
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: The aim of this study was to assess the potential dermal exposure to styrene in the fibreglass reinforced plastics industry. METHODS: Assessment was performed during spraying and rolling using a patch sampling technique. The patch was made of charcoal sandwiched between two layers of cotton fabric. Samplers were fastened at 12 different spots on a sampling overall, each spot representing a body area. One patch was fastened at the front of a cap. A patch fastened to a string worn around the neck assessed the exposure at chest level inside the clothing. Patches were fastened to cotton gloves at sites representing the dorsal side and the palm of the hand to evaluate exposure on these areas. Following sampling the patches were solvent desorbed and styrene was analysed by gas chromatography flame ionization detection. RESULTS: The potential body exposure for the participating individuals was between 544 and 17 100 mg/h with a geometric mean (GM) of 3780 mg/h. The legs, arms and outer chest in general had the highest exposures. The left and right hands had mean (GM) exposures of 344 and 433 mg/h, respectively. Styrene was determined for the patch at the inside of the clothing, indicating contamination of the dermal layer. CONCLUSIONS: The charcoal patch can be used to evaluate potential exposure to styrene. The results indicate that the dermal layer of the worker is exposed to styrene. Precautions should be performed to reduce dermal exposure.
|
|
| 6. |
- Eriksson, Kåre, et al.
(författare)
-
Dermal exposure to terpenic resin acids in Swedish carpentry workshops and sawmills
- 2004
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press. - 0003-4878 .- 1475-3162. ; 48:3, s. 267-275
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: The aim of this study was to evaluate dermal exposure to the resin acids abietic acid, dehydroabietic acid and 7-oxodehydroabietic acid during collecting in sawmills and during sawing in carpentry workshops, respectively. METHODS: Sampling was performed by fastening patches at 12 different areas on a sampling overall, one patch on the front of a cap, one patch on the chest inside the clothing and one patch on the inner lower right leg. Exposure of the hands was assessed by fastening patches on cotton gloves representing the dorsal sides and the palms of the left and right hands. Sampling was performed on 30 different occasions in the sawmills and in the carpentry workshops with mean sampling times of 120 and 59 min, respectively. The acids were solvent desorbed from the patches. Identification and quantification of the resin acids was performed by gas chromatography-mass spectrometry. RESULTS: The geometric means (GMs) of the potential body exposures to abietic acid, dehydroabietic acid and 7-oxodehydroabietic acid during sawing and collecting of wood from pine and spruce were 3346 and 17 247 micro g/h, respectively. The GM of the potential exposure on the hands was 3020 micro g/h in the carpentry workshops and 4365 micro g/h in the sawmills. Resin acids were detected on the inner chest and inner lower front right leg, respectively. CONCLUSIONS: There is a potential dermal exposure to terpenic resin acids in carpentry workshops as well as in sawmills. The hands have the highest exposure during sawing as well as during collecting. There is a spatial distribution of contaminants, with the outer chest, arms and legs showing the highest exposures. Resin acids also contaminated the inner chest and inner lower leg. It is necessary to take action to reduce dermal exposure to these allergenic substances.
|
|
| 7. |
|
|
| 8. |
- Madsen, AM, et al.
(författare)
-
Microbial dustiness and particle release of different biofuels
- 2004
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162. ; 48:4, s. 327-338
-
Tidskriftsartikel (refereegranskat)abstract
- Exposure to organic dust originating from biofuels can cause adverse health effects. In the present study we have assessed the dustiness in terms of microbial components and particles of various biofuels by using a rotating drum as a dust generator. Microbial components from straw, wood chips, wood pellets and wood briquettes were quantified by several methods. Excellent correllations (r greater than or equal to 0.85, P < 0.0001) were found: between lipopolysaccharide (LPS) (as determined by 3-hydroxy fatty acid analysis) and endotoxin (as determined by a Limulus test), cultivable bacteria, total number of bacteria and muramic acid; between endotoxin and cultivable bacteria, total number of bacteria and muramic acid; between total number of bacteria and muramic acid; between cultivable fungi and total number of fungi. Straw was dustier than the other biofuels in terms of actinomycetes, bacteria, muramic acid, endotoxin, LPS, particle mass and number of particles. One of the wood chips studied and the straws had comparatively high dustiness In terms of fungi, while both wood pellets and wood briquettes had comparatively low dustiness in terms of all microbial components. An initially high particle generation rate of straw and wood chips decreased over time whereas the particle generation rate of wood briquettes and wood pellets increased during a 5 min rotation period. Particles of non-microbial origin may be the determining factor for the health risk in handling briquettes and pellets. Straw dust contained significantly more microorganisms per particle than did wood chip dust, probably because bacteria were most abundant in straw dust. The concentrations of endotoxin and fungi were high in wood and straw dust; dust from one of the straws contained 3610 EU/mg and dust from one of the chips contained 7.3 x 10(6) fungal spores/mg. An exposure to 3 mg of straw or wood chips dust/m(3) (the Swedish and Danish OEL of unspecific inhalable dust) could cause exposures to endotoxin and fungi higher than levels were health symptoms are seen to develop. The very different levels of dustiness in terms of particles and microbial components of different biofuels shows that dustiness is an important health-relevant factor to consider when choosing among biofuels and when designing worksites for handling of biofuels.
|
|
| 9. |
- Rajan-Sithamparanadarajah, R, et al.
(författare)
-
Patterns of dermal exposure to hazardous substances in European union workplaces.
- 2004
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 48:3, s. 285-97
-
Tidskriftsartikel (refereegranskat)abstract
- Workplace dermal exposure assessment is a complex task that aims to understand the dynamic interaction between the skin and the hazardous substances present in the surrounding environment. A European project known as RISKOFDERM gathered dermal exposure data in 85 workplaces (industrial and other types) in five countries in Europe. In order to optimize data collection and to develop a representative picture of dermal exposure, scenarios (tasks made up of a series of activities) were grouped together into dermal exposure operation units (DEOs). The allocation of scenarios to relevant DEOs was achieved on the basis of similarities of exposure routes, tasks and professional judgement. Sampling and quantification procedures were based on the approaches recommended by the OECD protocol. The laboratories involved in the analysis of the samples participated in quality assurance programmes. This exercise resulted in 419 body measurements and 437 measurements on hands expressed in terms of formulation (product) in use. Exposures for a given scenario varied by several orders of magnitude. The extent and patterns of exposure were found to be dependent on various exposure determinants, including inter- and intra-scenario variations. Hands were found to be the most contaminated parts of the body. Exposure patterns for liquid and solid contaminants were different. On the basis of the analysis of the data presented here, the averaged results (median and 95th percentile) for a given DEO unit should not be used as a representative measure of dermal exposure for all scenarios within that DEO without taking the exposure determinants into account. However, the data could be used to develop an exposure matrix (indicative exposure distributions) for different types of scenario and workplace, using determinants of exposure and a Bayesian approach to integrating expert opinion.
|
|
| 10. |
|
|
