| 1. |
- Aarnio, Harri, et al.
(författare)
-
Spontaneous Charge Transfer and Dipole Formation at the Interface Between P3HT and PCBM
- 2011
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag Berlin. - 1614-6832 .- 1614-6840. ; 1:5, s. 792-797
-
Tidskriftsartikel (refereegranskat)abstract
- In the pursuit of developing new materials for more efficient bulk-heterojunction solar cells, the blend poly (3-hexylthiophene):[ 6,6]-phenyl-C(61)-butyric acid methyl ester (P3HT:PCBM) serves as an important model system. The success of the P3HT: PCBM blend comes from efficient charge generation and transport with low recombination. There is not, however, a good microscopic picture of what causes these, hindering the development of new material systems. In this report UV photoelectron spectroscopy measurements on both regiorandom-(rra) and regioregular-(rr) P3HT are presented, and the results are interpreted using the Integer Charge Transfer model. The results suggest that spontaneous charge transfer from P3HT to PCBM occurs after heat treatment of P3HT: PCBM blends. The resulting formation of an interfacial dipole creates an extra barrier at the interface explaining the reduced (non-)geminate recombination with increased charge generation in heat treated rr-P3HT: PCBM blends. Extensive photoinduced absorption measurements using both above-and below-bandgap excitation light are presented, in good agreement with the suggested dipole formation.
|
|
| 2. |
|
|
| 3. |
- Bao, Qinye, et al.
(författare)
-
Oxygen- and Water-Based Degradation in [6,6]-Phenyl-C-61-Butyric Acid Methyl Ester (PCBM) Films
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag. - 1614-6832 .- 1614-6840. ; 4:6
-
Tidskriftsartikel (refereegranskat)abstract
- Effects of in situ oxygen/water exposure on the energetics of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) films are presented. For oxygen exposure, the work function is downshifted by ≈0.15 eV compared to the ideal integer charge transfer (ICT) curve for pristine PCBM, which is incompatible with significant introduction of electron trap states or p-doping. Water induces the highest occupied molecular orbital (HOMO) structure to undergo strong, irreversible modifications accompanied by a chemical interaction with PCBM.
|
|
| 4. |
- Ben Dkhil, Sadok, et al.
(författare)
-
Interplay of Optical, Morphological, and Electronic Effects of ZnO Optical Spacers in Highly Efficient Polymer Solar Cells
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag. - 1614-6832 .- 1614-6840. ; 4:18, s. 1400805-
-
Tidskriftsartikel (refereegranskat)abstract
- Optical spacers based on metal oxide layers have been intensively studied in poly(3-hexylthiophene) (P3HT) based polymer solar cells for optimizing light distribution inside the device, but to date, the potential of such a metal oxide spacer to improve the electronic performance of the polymer solar cells simultaneously has not yet be investigated. Here, a detailed study of performance improvement in high efficient polymer solar cells by insertion of solution-processed ZnO optical spacer using ethanolamine surface modification is reported. Insertion of the modified ZnO optical spacer strongly improves the performance of polymer solar cells even in the absence of an increase in light absorption. The electric improvements of the device are related to improved electron extraction, reduced contact barrier, and reduced recombination at the cathode. Importantly, it is shown for the first time that the morphology of optical spacer layer is a crucial parameter to obtain highly efficient solar cells in normal device structures. By optimizing optical spacer effects, contact resistance, and morphology of ZnO optical spacers, poly[[4,8-bis[(2-ethylhexyl) oxy] benzo[1,2-b: 4,5-b] dithiophene-2,6diyl] [3-fluoro-2-[(2-ethylhexyl) carbonyl] thieno[3,4-b] thiophenediyl]] (PTB7):[6,6]-phenyl-C71-butyric acid (PC70 BM) bulk heterojunction solar cells with conversion efficiency of 7.6% are obtained in normal device structures with all-solution-processed interlayers.
|
|
| 5. |
|
|
| 6. |
- Dang, Dongfeng, 1988, et al.
(författare)
-
Enhanced Photovoltaic Performance of Indacenodithiophene-Quinoxaline Copolymers by Side- Chain Modulation
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 4:15, s. Art. no. 1400680-
-
Tidskriftsartikel (refereegranskat)abstract
- Two pairs of indacenodithiophene (IDT) and quinoxaline-based copolymers with meta- or para-hexyl-phenyl side chains on the IDT unit are synthesized. The meta-substituted polymers offer better solubility, higher molecular weight for both fluorinated and non-fluorinated copolymers, and a superior photovoltaic performance with a power conversion efficiency of 7.8%. The side-chain design strategy presented is an efficient way to produce high performance conjugated polymers for organic electronics.
|
|
| 7. |
- Fabiano, Simone, et al.
(författare)
-
Charge transport orthogonality in all-polymer blend transistors, diodes, and solar cells
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag. - 1614-6832 .- 1614-6840. ; 4:6, s. 1301409-
-
Tidskriftsartikel (refereegranskat)abstract
- Polymer aggregation and phase separation of polymer-polymer blends are effectively tuned from self-stratified to laterally phase-separated by adjusting the relative solubility of the two polymers in the mixture. This is found to dramatically alter the charge transport characteristics from a preferential in-plane to an out-of-plane direction, revealing the critical dependence of the resulting device performance on the film morphology and structure of the active layer. © 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim.
|
|
| 8. |
- Gabrielsson, Erik, et al.
(författare)
-
Convergent/Divergent Synthesis of a Linker-Varied Series of Dyes for Dye-Sensitized Solar Cells Based on the D35 Donor
- 2013
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 3:12, s. 1647-1656
-
Tidskriftsartikel (refereegranskat)abstract
- A series of four new dyes, based on the D35 type donor moiety with varied linker units, is synthesized using a facile convergent/divergent method, enabled by an improved synthesis of the D35 donor. The dyes are evaluated in dye sensitized solar cells with Co(II/III)(bpy)3-based electrolytes. By extending the linker fragment, higher photocurrents and solar energy conversion efficiencies are achieved. It is also found that the linker unit plays a crucial role in maintaining a high open-circuit photovoltage. Based on the photovoltaic performance it is concluded that the hexylthiophene unit is the most suitable for this purpose, as it allows further enhancement of the already high open-circuit voltage of D35 to 0.92 V. The best dye in this series reaches an efficiency of 6.8%.
|
|
| 9. |
|
|
| 10. |
- Howard, Ian A., et al.
(författare)
-
Nonequilibrium Charge Dynamics in Organic Solar Cells
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 4:9
-
Tidskriftsartikel (refereegranskat)abstract
- The dynamics of charge carriers after their creation at, or near, an interface play a critical role in determining the efficiency of organic solar cells as they dictate, via mechanisms that are not yet fully understood, the pathways for charge separation and recombination. Here, a combination of ultrafast transient spectroscopy and kinetic Monte Carlo simulations based on a minimalistic model are used to examine various aspects of these charge dynamics in a typical donor-acceptor copolymer:methanofullerene blend. The observed rates of charge carrier energetic relaxation and recombination for a sequence of charge densities can be all consistently described in terms of the extended Gaussian disorder model. The physical picture that arises is a) that initial charge motion is highly diffusive and boosted by energetic relaxation in the disordered density of states and b) that mobile charge carriers dissociate from and re-associate into Coulombically associated pairs faster than they recombine, especially at early times. A simple analytical calculation confirms this picture and can be used to identify sub-Langevin recombination as the cause for quantitative deviations between the Monte Carlo calculations and the measured concentration dependence of the charge recombination.
|
|
