| 1. |
- Abitbol, Tiffany, et al.
(författare)
-
Isolation of Mixed Compositions of Cellulose Nanocrystals, Microcrystalline Cellulose, and Lignin Nanoparticles from Wood Pulps
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:24, s. 21474-21484
-
Tidskriftsartikel (refereegranskat)abstract
- From a circular economyperspective, one-pot strategies for theisolation of cellulose nanomaterials at a high yield and with multifunctionalproperties are attractive. Here, the effects of lignin content (bleachedvs unbleached softwood kraft pulp) and sulfuric acid concentrationon the properties of crystalline lignocellulose isolates and theirfilms are explored. Hydrolysis at 58 wt % sulfuric acid resulted inboth cellulose nanocrystals (CNCs) and microcrystalline celluloseat a relatively high yield (>55%), whereas hydrolysis at 64 wt% gaveCNCs at a lower yield (<20%). CNCs from 58 wt % hydrolysis weremore polydisperse and had a higher average aspect ratio (1.5-2x),a lower surface charge (2x), and a higher shear viscosity (100-1000x).Hydrolysis of unbleached pulp additionally yielded spherical nanoparticles(NPs) that were <50 nm in diameter and identified as lignin bynanoscale Fourier transform infrared spectroscopy and IR imaging.Chiral nematic self-organization was observed in films from CNCs isolatedat 64 wt % but not from the more heterogeneous CNC qualities producedat 58 wt %. All films degraded to some extent under simulated sunlighttrials, but these effects were less pronounced in lignin-NP-containingfilms, suggesting a protective feature, but the hemicellulose contentand CNC crystallinity may be implicated as well. Finally, heterogeneousCNC compositions obtained at a high yield and with improved resourceefficiency are suggested for specific nanocellulose uses, for instance,as thickeners or reinforcing fillers, representing a step toward thedevelopment of application-tailored CNC grades.
|
|
| 2. |
- Amjad, Muhammad Raiees, et al.
(författare)
-
Carbonate Reservoir Quality Variations in Basins with a Variable Sediment Influx: A Case Study from the Balkassar Oil Field, Potwar, Pakistan
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:4, s. 4127-4145
-
Tidskriftsartikel (refereegranskat)abstract
- The carbonate reservoir quality is strongly reliant on the compaction process during sediment burial and other processes such as cementation and dissolution. Porosity and pore pressure are the two main factors directly affected by mechanical and chemical compactions. Porosity reduction in these carbonates is critically dependent on the overburden stress and subsidence rate. A variable sediment influx in younger basins may lead to changes in the reservoir quality in response to increasing lithostatic pressure. Deposition of molasse sediments as a result of the Himalayan orogeny caused variations in the sedimentation influx in the Potwar Basin of Pakistan throughout the Neogene times. The basic idea of this study is to analyze the carbonate reservoir quality variations induced by the compaction and variable sediment influx. The Sakesar Limestone of the Eocene age, one of the proven carbonate reservoirs in the Potwar Basin, shows significant changes in the reservoir quality, specifically in terms of porosity and pressure. A 3D seismic cube (10 km2) and three wells of the Balkassar field are used for this analysis. To determine the vertical and lateral changes of porosity in the Balkassar area, porosity is computed from both the log and seismic data. The results of both the data sets indicate 2–4% porosities in the Sakesar Limestone. The porosity reduction rate with respect to the lithostatic pressure computed with the help of geohistory analysis represents a sharp decrease in porosity values during the Miocene times. Pore pressure predictions in the Balkassar OXY 01 well indicate underpressure conditions in the Sakesar Limestone. The Eocene limestones deposited before the collision of the Indian plate had enough time for fluid expulsion and show underpressure conditions with high porosities.
|
|
| 3. |
- Aouelela, Marwa H. A., et al.
(författare)
-
Synthesis and Characterization of Molybdenum- and Sulfur-Doped FeSe
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:39, s. 36553-36561
-
Tidskriftsartikel (refereegranskat)abstract
- During the past decade, two-dimensional (2D) layered materials opened novel opportunities for the exploration of exciting new physics and devices owing to their physical and electronic properties. Among 2D materials, iron selenide has attracted much attention from several physicists as they provide a fruitful stage for developing new superconductors. Chemical doping offers a powerful approach to manipulate and optimize the electronic structure and physical properties of materials. Here, to reveal how doping affects the physical properties in FeSe, we report on complementary measurements of molybdenum- and sulfur-doped FeSe with theoretical calculations. Mo0.1Fe0.9Se0.9S0.1 was synthesized by a one-step solid-state reaction method. Crystal structure and morphology were studied using powder X-ray diffraction and scanning electron microscopy. Thermal stability and decomposition behavior in doped samples were studied by thermogravimetric analysis, and to understand the microscopic influence of doping, we performed Raman spectroscopy. First-principles calculations of the electronic structure illustrate distinct changes of electronic structures of the substituted FeSe systems, which can be responsible for their superconducting properties.
|
|
| 4. |
- Arkhipov, Victor P., et al.
(författare)
-
Rhamnolipid Biosurfactant: Use for the Removal of Phenol from Aqueous Solutions by Micellar Solubilization
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society. - 2470-1343. ; 8:33, s. 30646-30654
-
Tidskriftsartikel (refereegranskat)abstract
- Selective measurements of the self-diffusion coefficients of molecules of the biological surfactant rhamnolipid (RL) in individual aqueous solutions and in solutions with phenol as a solubilizate were carried out by nuclear magnetic resonance (NMR) diffusometry. Based on the obtained results, the solubilization characteristics of RLs were calculated. They are the fraction of solubilized phenol molecules, the phenol micelle-water distribution coefficient, the molar solubilization coefficient, the hydrodynamic radii of RL monomers and micelles, the aggregation numbers of micelles, and the solubilization capacity of micelles. Fraction of the solubilized phenol molecules increases and approaches 80-90% with increasing RL concentration. The solubilization capacity of the micelles increases from several units to 102 with an increase in both the concentration of RLs and the concentration of phenol in solution.
|
|
| 5. |
- Asimi Neisiani, Ali, et al.
(författare)
-
Technical and Economic Comparison between Sodium and Ammonium Agents in the Jarosite Precipitation Process─An Evaluation for Industrial Applications
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society. - 2470-1343. ; 8:39, s. 35442-36613
-
Tidskriftsartikel (refereegranskat)abstract
- Iron content can cause severe challenges through zinc production from zinc sulfide concentrate. The zinc industry extensively uses the jarosite precipitation process (JPP) to precipitate dissolved iron and remove it before transferring the solution to downstream stages. Precipitating agents (PAs) play an essential role in the JPP. However, surprisingly, no study compares the efficiency of various PAs on an industrial scale. As an innovative approach, this investigation compares the technical and economic aspects of using various sodium and ammonium compounds (hydroxides, carbonates, bicarbonates, sulfates, and bisulfates) as typical PAs for the JPP at the Bafgh Zinc Smelting Company (BZSC) plant. Experimental results revealed that ammonium hydroxide, with 90.85% iron removal efficiency, had the highest performance, and sodium bisulfate and ammonium bisulfate had the lowest efficiency (74.54 and 77.13%, respectively). However, since ammonium hydroxide is a corrosive PA, it is not a promising alternative to sodium sulfate (with both economic and safety issues). Based on technical and economic assessments, sodium carbonate (84.31% iron removal efficiency) showed the highest potential for an efficient JPP.
|
|
| 6. |
- Behroozi Kohlan, Taha, et al.
(författare)
-
Amphiphilic Polyoxazoline Copolymer-Imidazole Complexes as Tailorable Thermal Latent Curing Agents for One-Component Epoxy Resins
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:49, s. 47173-47186
-
Tidskriftsartikel (refereegranskat)abstract
- One-component epoxy resins (OCERs) are proposed to overcome the energy inefficiency and processing difficulties of conventional two-component epoxy resins by employing latent curing agents, specifically thermal latent curing agents (TLCs). Despite recent progress, the need for TLCs with a simple preparation method for different curing agents, epoxy resins, and process conditions remains. Here, tailorable TLCs were prepared by forming complexes between imidazole (Im) and amphiphilic polyoxazoline copolymers with tunable structures and properties by a solvent evaporation method. The obtained TLCs were manually mixed with DGEBA to prepare OCERs. The miscibility of the complexes with DGEBA was studied, considering the functionalities of copolymers. The curing behaviors of TLCs were compared using dynamic Differential Scanning Calorimetry (DSC) studies considering the side chain and composition of the copolymers, copolymer:Im ratio, and concentration of Im in DGEBA. The curing behavior of the promising OCERs was studied by isothermal DSC studies to investigate their stability at different temperatures and curing rate at elevated temperatures revealing the stability of these OCERs.
|
|
| 7. |
- Capezza, Antonio Jose, et al.
(författare)
-
Biodegradable Fiber-Reinforced Gluten Biocomposites for Replacement of Fossil-Based Plastics
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 9:1, s. 1341-1351
-
Tidskriftsartikel (refereegranskat)abstract
- Biocomposites based on wheat gluten and reinforced with carbon fibers were produced in line with the strive to replace fossil-based plastics with microplastic-free alternatives with competing mechanical properties. The materials were first extruded/compounded and then successfully injection molded, making the setup adequate for the current industrial processing of composite plastics. Furthermore, the materials were manufactured at very low extrusion and injection temperatures (70 and 140 degrees C, respectively), saving energy compared to the compounding of commodity plastics. The sole addition of 10 vol % fibers increased yield strength and stiffness by a factor of 2-4 with good adhesion to the protein. The biocomposites were also shown to be biodegradable, lixiviating into innocuous molecules for nature, which is the next step in the development of sustainable bioplastics. The results show that an industrial protein coproduct reinforced with strong fibers can be processed using common plastic processing techniques. The enhanced mechanical performance of the reinforced protein-based matrix herein also contributes to research addressing the production of safe materials with properties matching those of traditional fossil-based plastics.
|
|
| 8. |
- Ceylan, Fatma Duygu, et al.
(författare)
-
Combined Neutrase-Alcalase Protein Hydrolysates from Hazelnut Meal, a Potential Functional Food Ingredient
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:1, s. 1618-1631
-
Tidskriftsartikel (refereegranskat)abstract
- Consumers' interest in functional foods has significantly increased in the past few years. Hazelnut meal, the main valuable byproduct of the hazelnut oil industry, is a rich source of proteins and bioactive peptides and thus has great potential to become a valuable functional ingredient. In this study, hazelnut protein hydrolysates obtained by a single or combined hydrolysis by Alcalase and Neutrase were mainly characterized for their physicochemical properties (SDS-PAGE, particle size distribution, Fourier-transform infrared (FTIR) spectroscopy, molecular weight distribution, etc.) and potential antiobesity effect (Free fatty acid (FFA) release inhibition), antioxidant activity (DPPH and ABTS methods), and emulsifying properties. The impact of a microfluidization pretreatment was also investigated. The combination of Alcalase with Neutrase permitted the highest degree of hydrolysis (DH; 15.57 ± 0.0%) of hazelnut protein isolate, which resulted in hydrolysates with the highest amount of low-molecular-weight peptides, as indicated by size exclusion chromatography (SEC) and SDS-PAGE. There was a positive correlation between the DH and the inhibition of FFA release by pancreatic lipase (PL), with a significant positive effect of microfluidization when followed by Alcalase hydrolysis. Microfluidization enhanced the emulsifying activity index (EAI) of protein isolates and hydrolysates. Low hydrolysis by Neutrase had the best effect on the EAI (84.32 ± 1.43 (NH) and 88.04 ± 2.22 m2/g (MFNH)), while a negative correlation between the emulsifying stability index (ESI) and the DH was observed. Again, the combined Alcalase-Neutrase hydrolysates displayed the highest radical scavenging activities (96.63 ± 1.06% DPPH and 98.31 ± 0.46% ABTS). FTIR results showed that the application of microfluidization caused the unfolding of the protein structure. The individual or combined application of the Alcalase and Neutrase enzymes caused a switch from the β-sheet organization of the proteins to α-helix structures. In conclusion, hazelnut meal may be a good source of bioactive and functional peptides. The control of its enzymatic hydrolysis, together with an appropriate pretreatment such as microfluidization, may be crucial to achieve the best suitable activity.
|
|
| 9. |
- Ding, Saiman, et al.
(författare)
-
Potassium-Induced Phenomena and Their Effects on the Intrinsic Reactivity of Biomass-Derived Char during Steam Gasification
- 2023
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 8:32, s. 29131-29142
-
Tidskriftsartikel (refereegranskat)abstract
- The mineral content of biomass plays an important role in the gasification rate of biomass-derived char. The understanding and quantification of mineral-related phenomena are thus of importance when considering gasification reactor design. In the present work, the potassium-induced catalytic phenomena during gasification of biomass-derived char have been studied. Char samples with similar structure and different intrinsic potassium content were gasified in a steam atmosphere at a temperature range of 700-800 °C. It was found that for all the samples, irrespective of the temperature and the initial potassium content, there is a critical K/C ratio (5 × 10-3), whereafter the catalytic phenomena prevail. The instantaneous conversion rate of the char is positively correlated with the potassium content and the progressively increasing conversion. The application of the modified random pore model was able to capture the later stages of conversion by the introduction of two additional parameters (c and p). It was found that these constants are not just fitting parameters but that there is an underlying physical significance with c being directly related to the intrinsic potassium content while being temperature independent and with p being temperature dependent.
|
|
| 10. |
- El-sagheir, Ahmed M. Kamal, et al.
(författare)
-
Design, Synthesis, Molecular Modeling, Biological Activity, and Mechanism of Action of Novel Amino Acid Derivatives of Norfloxacin
- 2023
-
Ingår i: ACS Omega. - 2470-1343. ; 8:45, s. 43271-43284
-
Tidskriftsartikel (refereegranskat)abstract
- Two series of N4-substituted piperazinyl amino acid derivatives of norfloxacin (24 new compounds) were designed and synthesized to attain structural surrogates with additional binding sites and enhanced antibacterial activity. Synthesized derivatives showed increased antibacterial and antimycobacterial activity compared to their lead structure, norfloxacin. Molecular modeling studies supported the notion that the derivatives can establish additional bonds with the target enzymes gyrase and topoisomerase IV. In vitro enzyme inhibition assays confirmed that the tested compounds were significant inhibitors of these enzymes. Inhibition of gyrase and topoisomerase IV was then confirmed in living bacterial cells using bacterial cytological profiling of both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis, revealing a typical topoisomerase inhibition phenotype characterized by severe nucleoid packing defects. Several derivatives exhibited additional effects on the Gram-positive cell wall synthesis machinery and/or the cytoplasmic membrane, which likely contributed to their increased antibacterial activity. While we could not identify specific cell wall or membrane targets, membrane depolarization was not observed. Our experiments further suggest that cell wall synthesis inhibition most likely occurs outside the membrane-bound lipid II cycle.
|
|
