1. |
|
|
2. |
|
|
3. |
- Arnold, Staci D., et al.
(författare)
-
Clinical risks and healthcare utilization of hematopoietic cell transplantation for sickle cell disease in the USA using merged databases
- 2017
-
Ingår i: Haematologica. - : Ferrata Storti Foundation (Haematologica). - 0390-6078 .- 1592-8721. ; 102:11, s. 1823-1832
-
Tidskriftsartikel (refereegranskat)abstract
- Advances in allogeneic hematopoietic cell transplantation for sickle cell disease have improved outcomes, but there is limited analysis of healthcare utilization in this setting. We hypothesized that, compared to late transplantation, early transplantation (at age < 10 years) improves outcomes and decreases healthcare utilization. We performed a retrospective study of children transplanted for sickle cell disease in the USA during 2000-2013 using two large databases. Univariate and Cox models were used to estimate associations of demographics, sickle cell disease severity, and transplant-related variables with mortality and chronic graft-versus-host disease, while Wilcoxon, Kruskal-Wallis, or linear trend tests were applied for the estimates of healthcare utilization. Among 161 patients with a 2-year overall survival rate of 90% (95% confidence interval [CI] 85-95%) mortality was significantly higher in those who underwent late transplantation versus early (hazard ratio (HR) 21, 95% CI 2.8-160.8, P=0.003) and unrelated compared to matched sibling donor transplantation (HR 5.9, 95% CI 1.7-20.2, P=0.005). Chronic graftversus host disease was significantly more frequent among those translanted late (HR 1.9, 95% CI 1.0-3.5, P=0.034) and those who received an unrelated graft (HR 2.5, 95% CI 1.2-5.4; P=0.017). Merged data for 176 patients showed that the median total adjusted transplant cost per patient was $467,747 (range: $344,029-$ 799,219). Healthcare utilization was lower among recipients of matched sibling donor grafts and those with low severity disease compared to those with other types of donor and disease severity types (P<0.001 and P=0.022, respectively); no association was demonstrated with late transplantation (P=0.775). Among patients with 2-year pre-and post-transplant data (n=41), early transplantation was associated with significant reductions in admissions (P<0.001), length of stay (P<0.001), and cost (P=0.008). Early transplant outcomes need to be studied prospectively in young children without severe disease and an available matched sibling to provide conclusive evidence for the superiority of this approach. Reduced post-transplant healthcare utilization inpatient care indicates that transplantation may provide a sustained decrease in healthcare costs over time.
|
|
4. |
- Asplund, Matthias, et al.
(författare)
-
Improved wheel-rail system of Sweden’s iron ore line
- 2017
-
Ingår i: Proceedings of the 11th International Heavy Haul Association Conference (IHHA 2017), Cape Town, South Africa, 2–6 September 2017. - 9780911382662 ; , s. 759-766
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- ABSTRACT: The Swedish Iron Ore Line (IOL) is the only heavy haul line in Europe. The northern part of the line is located above the Arctic Circle, a very harsh climate. Because of the introduction of new vehicles with a 30-tonnes axle load, the track were gradually replaced between 2006 and 2009 with heavier rails, mostly with a steel grade of R350LHT. Just after the first replacement of track in 2006, the project presented herein was established with the primary goal of improving the life length of the rail, and monitoring activities started. This project now has a unique database of rail degradation data. So far, the information has been used to improve the performance of the wheel-rail system and thus extend the life length of the rail, as well as to improve our knowledge of heavy haul operations in a cold climate. The paper discusses the project progress in general and gives some examples of improvements that have been successfully implemented, such as new rail profiles and a higher grinding frequency. Finally, it discusses the challenges of future capacity improvements, such as an increase in the axle load, and how these can be addressed.
|
|
5. |
- Khan, Saad Ahmed, 1987-, et al.
(författare)
-
Prediction of top-of-rail friction control effects on rail RCF suppressed by wear
- 2017
-
Ingår i: Wear. - : Elsevier. - 0043-1648 .- 1873-2577. ; 380-381, s. 106-114
-
Tidskriftsartikel (refereegranskat)abstract
- Rolling contact fatigue (RCF) and wear, two major deterioration processes, limit the lifetime of rails. These deterioration processes are even more severe on the curves of tracks used by heavy haul trains. Because wear is a material removing process, it can suppress the formation of RCF (also known as surface initiated cracks). In railways, cracks have a higher risk of instigating a catastrophic failure than wear; hence, it is comparatively better to have wear than to have cracks. By controlling the top-of-rail friction, both of these deteriorating processes can be reduced to enhance the lifetime of rails. In order to achieve these possible advantages, the infrastructure manager of the Swedish railway is planning to implement a top-of-rail friction control technology on the iron ore line in northern Sweden wherein RCF is a major problem on the curves. The present study uses a damage index model in a multi-body simulation software and predicts the probability of RCF formation with suppressing effect of wear for different friction control values. The effect of friction control is simulated on curve radii ranging from 200 to 3,000 m and axle loads ranging from 30 to 40 t at a constant train speed of 60 km/h. Findings show that on a very sharp circular curve, radius < 300 m, RCF can be eliminated without friction control due to the high wear rate. On moderate curves, 300 < radius < 1,000 m, a friction coefficient (µ) of, at most, 0.3 with a Kalker's coefficient of, at most, 30% is required to avoid RCF
|
|
6. |
- Nordmark, Thomas, et al.
(författare)
-
Use of electro-dynamic braking on locomotives and its effect on rolling contact fatigue
- 2017
-
Ingår i: Proceedings of the 11th International Heavy Haul Association Conference (IHHA 2017), Cape Town, South Africa, 2–6 September 2017. - 9780911382662 ; , s. 1133-1137
-
Konferensbidrag (refereegranskat)abstract
- ABSTRACT: The mining company LKAB uses IORE locomotives to haul iron ore trains. When evaluated using life cycle cost (LCC) analysis for reliability, availability, maintainability, and safety (RAMS), wheel life is found to be 930,000 km. The IORE locomotives are equipped with electro-dynamic (ED) brakes, but because of the inability of the contact grid to handle the full regenerative energy from the locomotives, the use of theED-brake was restricted until the contact grid was upgraded in 2010. From around 2011, the wheel life started to decrease because of increased rolling contact fatigue (RCF), dropping to around 350,000 km. LKABsuspected the use of the ED-brake was contributing to the RCF problem. A field test compared one locomotive with ED-braking reduced to a minimum level to a locomotive with full ED-braking capacity. The wheels of the two locomotives were visually inspected at intervals of about 13,000 km. The results showed no difference in RCF performance between the locomotives.
|
|
7. |
|
|
8. |
- Sheikh, Saad Ahmed, 1987, et al.
(författare)
-
Predicting solid solubility in CoCrFeNiMx (M=4d transition metal) high-entropy alloys
- 2017
-
Ingår i: Journal of Applied Physics. - : American Institute of Physics (AIP). - 0021-8979 .- 1089-7550. ; 121:19
-
Tidskriftsartikel (refereegranskat)abstract
- CoCrFeMnNi is a prototype fcc-structured high-entropy alloy. Numerous efforts have been paid to strengthen CoCrFeMnNi, by replacing Mn with other elements for an enhancement of the solid solution strengthening. 4d transition metals, including Zr, Nb, and Mo, are of interest for this purpose, since they have much larger atomic radii than that of Mn. However, Nb and Mo are known to have a low solid solubility in fcc-structured CoCrFeNi. Compared to Nb and Mo, Zr has an even larger atomic radius. The solid solubility of Zr in fcc-structured CoCrFeNi was investigated in this work, combining both experimental studies and thermodynamic calculations. In addition, based on previous results and new results obtained here, methods to predict the solid solubility in CoCrFeNiMx (M = Zr, Nb, and Mo) alloys were developed. Particularly, the average d-orbital energy level, Md, was re-evaluated in the present work, for an improved predictability of the solid solubility in fcc-structured high entropy alloys containing 4d transition metals.
|
|
9. |
- Wani, I. S., et al.
(författare)
-
Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy
- 2017
-
Ingår i: Intermetallics. - : Elsevier BV. - 0966-9795. ; 84, s. 42-51
-
Tidskriftsartikel (refereegranskat)abstract
- The development of texture during cold-rolling and recrystallization was investigated in a AlCoCrFeNi2.1 eutectic high entropy alloy (EHEA). For this purpose, the as-cast alloy was cold-rolled to 90% reduction in thickness and annealed at temperatures ranging from 800 °C to 1200 °C. The microstructure of the as-cast EHEA showed a nano-lamellar mixture of L12 and B2 phases. The B2 phase was significantly harder than the L12 phase. Development of an ultrafine microstructure was observed after 90% cold-rolling. During cold-rolling, progressive disordering of the L12 phase was observed while the B2 phase maintained the ordered structure. The progressive disordering and development of a predominantly brass type texture in the L12 phase correlated well with profuse shear band formation during cold-rolling. The B2 phase showed the presence of the {111} component which was typical for cold-rolled B2 alloys. An ultrafine duplex structure of equiaxed L12 and B2 phases developed after complete recrystallization that showed significant resistance to grain growth up to very high annealing temperatures (?1300 °C). The remarkable resistance to grain growth compared to conventional or even other single or dual phase HEAs was due to the formation of a homogeneous duplex structure where growth of one phase was effectively retarded by the other phase. The strong presence of the ?-fiber components, but weak BR ({236} ) and D ({113} ) components in the recrystallization texture of the L12/FCC phase was due to the absence of strong preferential nucleation or growth. Presence of ND-fiber (ND// ) with strong {111} component in the recrystallization texture of the B2 phase indicated ease of nucleation from similarly oriented regions in the deformed microstructure.
|
|
10. |
- Wani, I. S., et al.
(författare)
-
Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi 2.1 eutectic high entropy alloy
- 2017
-
Ingår i: IOP Conference Series: Materials Science and Engineering. - 1757-8981 .- 1757-899X. ; 194:1
-
Konferensbidrag (refereegranskat)abstract
- The possibility of microstructural refinement and improvement of mechanical properties by severe cold-rolling was investigated in an AlCoCrFeNi2.1 lamellar eutectic high entropy alloy (EHEA). The as-cast alloy revealed fine scale eutectic mixture of L12 (ordered FCC) and B2 (ordered BCC) phases. During severe cold-rolling up to 90% reduction in thickness the B2 phase maintained the ordered structure, while the L12 phase showed the evolution of a nanocrystalline structure and progressive disordering. Annealing of the severely cold-rolled material resulted in the formation of duplex microstructures composed of two different phases with equiaxed morphologies and significant resistance to grain growth up to 1200°C. Annealing at 1000°C resulted in an optimum strength-ductility balance with the tensile strength of 1175 MPa and the total elongation of 23%. The present results showed that severe cold-rolling and annealing can impart very attractive mechanical properties in complex EHEAs.
|
|