| 1. |
- Journeau, C., et al.
(författare)
-
European Research on the Corium issues within the SARNET network of excellence
- 2008
-
Ingår i: International Conference on Advances in Nuclear Power Plants, ICAPP 2008. - 9781605607870 ; , s. 1172-1181
-
Konferensbidrag (refereegranskat)abstract
- Within SARNET, the corium topic covers all the behaviors of corium from early phase of core degradation to in or ex-vessel corium recovery with the exception of corium interaction with water, direct containment heating and fission product release. The corium topic regroups in three work packages the critical mass of competence required to improve significantly the corium behavior knowledge. The spirit of the SARNET networking is to share the knowledge, the facilities and the simulation tools for severe accidents, so to reach a better efficiency and to rationalize the R&D effort at European level. Extensive benchmarking has been launched in most of the areas of research. These benchmarks were mainly dedicated to the recalculation of experiments, while, in the next periods, a larger focus will be given to integral experiments or reactor applications. Eventually, all the knowledge will be accumulated in the ASTEC severe accident simulation code through physical model improvements and extension of validation database. This paper summarizes the progress that has been achieved in the frame of the networking activities. A special focus is placed on the melt pool and debris coolability and corium-concrete interaction, in which, the effects due to multidimensional geometries and heterogeneities has been shown, during SARNET, to play a crucial role and for which further research is still needed.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Alsmeyer, H, et al.
(författare)
-
Ex-vessel core melt stabilization research (ECOSTAR)
- 2005
-
Ingår i: Nuclear Engineering and Design. - : Elsevier BV. - 0029-5493 .- 1872-759X. ; 235:2-4, s. 271-284
-
Tidskriftsartikel (refereegranskat)abstract
- The project on ex-vessel core melt stabilization research (ECOSTAR) started in January 2000 to be concluded by end of 2003. The project is performed by 14 partner institutions from five European countries and involves a large number of experiments with low- and high-temperature simulant melts and real corium at different scales. Model development and scaling analysis allows application of the research results to existing and to future LWRs in the area of reactor design and accident mitigation. The project is oriented toward the analysis and mitigation of severe accident sequences that could occur in the ex-vessel phase of a postulated core melt accident. The issues are: (1) the release of melt form the pressure vessel, (2) the transfer and spreading of the melt on the basement, (3) the analysis of the physical-chemical processes that are important for corium behavior especially during concrete erosion with onset of solidification, and (4) stabilization of the melt by cooling through direct water contact. The results achieved so far resolve a number of important issues: the amount of melt that could be transferred at RPV failure from the RPV into the containment can be substantially reduced by lowering the residual pressure in the primary circuit. It is found that melt dispersion also strongly depends on the location of the RPV failure, and that lateral failure results in substantially less melt dispersion. During melt release, the impinging melt jet could erode parts of the upper basement surface. Jet experiments and a derived heat transfer relation allow estimation of its contribution to concrete erosion. Spreading of the corium melt on the available basement surface is an important process, which defines the initial conditions for concrete attack or for the efficiency of cooling in case of water contact, respectively. Validation of the spreading codes based on a large-scale benchmark experiment is underway and will allow determination of the initial conditions, for which a corium melt can be assumed to spread homogeneously over the available surface. Experiments with UO(2)-based corium melts highlight the role of phase segregation during onset of melt solidification and during concrete erosion. To cool the spread corium melt, the efficacy of top flooding and bottom flooding is investigated in small-scale and in large-scale experiments, supported by model developments. Project assessment is continuing to apply the results to present and future reactors.
|
|
| 5. |
|
|
