| 1. |
- Abdellaoui, G., et al.
(författare)
-
Meteor studies in the framework of the JEM-EUSO program
- 2017
-
Ingår i: Planetary and Space Science. - : Elsevier. - 0032-0633 .- 1873-5088. ; 143, s. 245-255
-
Tidskriftsartikel (refereegranskat)abstract
- We summarize the state of the art of a program of UV observations from space of meteor phenomena, a secondary objective of the JEM-EUSO international collaboration. Our preliminary analysis indicates that JEM-EUSO, taking advantage of its large FOV and good sensitivity, should be able to detect meteors down to absolute magnitude close to 7. This means that JEM-EUSO should be able to record a statistically significant flux of meteors, including both sporadic ones, and events produced by different meteor streams. Being unaffected by adverse weather conditions, JEM-EUSO can also be a very important facility for the detection of bright meteors and fireballs, as these events can be detected even in conditions of very high sky background. In the case of bright events, moreover, exhibiting some persistence of the meteor train, preliminary simulations show that it should be possible to exploit the motion of the ISS itself and derive at least a rough 3D reconstruction of the meteor trajectory. Moreover, the observing strategy developed to detect meteors may also be applied to the detection of nuclearites, exotic particles whose existence has been suggested by some theoretical investigations. Nuclearites are expected to move at higher velocities than meteoroids, and to exhibit a wider range of possible trajectories, including particles moving upward after crossing the Earth. Some pilot studies, including the approved Mini-EUSO mission, a precursor of JEM-EUSO, are currently operational or in preparation. We are doing simulations to assess the performance of Mini-EUSO for meteor studies, while a few meteor events have been already detected using the ground-based facility EUSO-TA.
|
|
| 2. |
- Abdellaoui, G., et al.
(författare)
-
First observations of speed of light tracks by a fluorescence detector looking down on the atmosphere
- 2018
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- EUSO-Balloon is a pathfinder mission for the Extreme Universe Space Observatory onboard the Japanese Experiment Module (JEM-EUSO). It was launched on the moonless night of the 25(th) of August 2014 from Timmins, Canada. The flight ended successfully after maintaining the target altitude of 38 km for five hours. One part of the mission was a 2.5 hour underflight using a helicopter equipped with three UV light sources (LED, xenon flasher and laser) to perform an inflight calibration and examine the detectors capability to measure tracks moving at the speed of light. We describe the helicopter laser system and details of the underflight as well as how the laser tracks were recorded and found in the data. These are the first recorded laser tracks measured from a fluorescence detector looking down on the atmosphere. Finally, we present a first reconstruction of the direction of the laser tracks relative to the detector.
|
|
| 3. |
- Arguedas Cuendis, S., et al.
(författare)
-
First results on the search for chameleons with the KWISP detector at CAST
- 2019
-
Ingår i: Physics of the Dark Universe. - : Elsevier. - 2212-6864. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- We report on a first measurement with a sensitive opto-mechanical force sensor designed for the direct detection of coupling of real chameleons to matter. These dark energy candidates could be produced in the Sun and stream unimpeded to Earth. The KWISP detector installed on the CAST axion search experiment at CERN looks for tiny displacements of a thin membrane caused by the mechanical effect of solar chameleons. The displacements are detected by a Michelson interferometer with a homodyne readout scheme. The sensor benefits from the focusing action of the ABRIXAS X-ray telescope installed at CAST, which increases the chameleon flux on the membrane. A mechanical chopper placed between the telescope output and the detector modulates the incoming chameleon stream. We present the results of the solar chameleon measurements taken at CAST in July 2017, setting an upper bound on the force acting on the membrane of 80pN at 95% confidence level. The detector is sensitive for direct coupling to matter 104≤βm≤108, where the coupling to photons is locally bound to βγ≤1011.
|
|
| 4. |
- Bisconti, F, et al.
(författare)
-
Mini-EUSO engineering model : Tests in open-sky condition
- 2019
-
Ingår i: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- Mini-EUSO is a UV telescope that will look downwards to the Earth’s atmosphere onboard the International Space Station. With the design of the ultra-high energy cosmic ray fluorescence detectors belonging to the JEM-EUSO program, it will make the first UV map of the Earth by observing atmospheric phenomena such as transient luminous events, sprites and lightning, as well as meteors and bioluminescence from earth. Diffused light from laser shots from the ground, which mimic the fluorescence light emitted by Nitrogen molecules when extensive air showers pass through the atmosphere, can be used to verify the capability of this kind of detector to observe ultra-high energy cosmic rays. To validate the electronics and the trigger algorithms developed for Mini-EUSO, a scaled down version of the telescope with 1:9 of the original focal surface and a lens of 2.5 cm diameter has been built. Tests of the Mini-EUSO engineering model have been made in laboratory and in open sky condition. In this paper, we report results of observations of the night sky, which include the detection of stars, meteors, a planet and a rocket body reflecting the sunlight. Interesting results of the observation of city lights are also reported.
|
|
| 5. |
- Casolino, M, et al.
(författare)
-
Mini-EUSO experiment to study UV emission of terrestrial and astrophysical origin onboard of the International Space Station
- 2019
-
Ingår i: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- Mini-EUSO will observe the Earth in the UV range (300 - 400 nm) offering the opportunity to study a variety of atmospheric events such as Transient Luminous Events (TLEs), meteors and marine bioluminescence. Furthermore it aims to search for Ultra High Energy Cosmic Rays (UHECR) above 1021 eV and Strange Quark Matter (SQM). The detector is expected to be launched to the International Space Station in August 2019 and look at the Earth in nadir mode from the UV-transparent window of the Zvezda module of the International Space Station. The instrument comprises a compact telescope with a large field of view (44?), based on an optical system employing two Fresnel lenses for light collection. The light is focused onto an array of 36 multi-anode photomultiplier tubes (MAPMT), for a total of 2304 pixels and the resulting signal is converted into digital, processed and stored via the electronics subsystems on-board. In addition to the main detector, Mini-EUSO contains two ancillary cameras[4] for complementary measurements in the near infrared (1500 - 1600 nm) and visible (400 - 780 nm) range and also a 8 × 8 SiPM imaging array.
|
|
| 6. |
- Miyamoto, H, et al.
(författare)
-
Space debris detection and tracking with the techniques of cosmic ray physics
- 2019
-
Ingår i: 36th International Cosmic Ray Conference, ICRC 2019. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- Space Debris (SD) consist of non-operational artificial objects orbiting around the Earth, which could possibly damage space vehicles, such as the International Space Station (ISS) or other manned spacecrafts. The vast majority of such objects are cm-sized, not catalogued and usually the tracking data are not precise enough. Here we present the feasibility study of SD detection and tracking with techniques usually employed in cosmic-ray physics. For this purpose, we have evaluated the possibility of using Mini-EUSO, a space-borne fluorescence telescope to be deployed on the ISS, to track SD illuminated by the Sun. By means of ESAF (EUSO Simulation and analysis Framework) simulation and by developing the trigger algorithms, we estimated the minimum size and maximum distances of detectable SD. We then studied the number of possible SD detections using an ESA software called MASTER (Meteoroid and SD Terrestrial Environment Reference). With the Mini-EUSO Engineering Model (Mini-EUSO EM), we performed some measurements to estimate the reflectance of the most common SD materials and to demonstrate the ability of Mini-EUSO to detect SD events. We also performed some tests in open-sky conditions, identifying and tracking fast-moving objects. In particular, the detection of a rocket body allowed us to confirm the simulation outcomes predictions and the expected performance of the detector.
|
|
| 7. |
- Miyamoto, H., et al.
(författare)
-
The Euso@turlab : Test of mini-EUSO engineering model
- 2019
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The TurLab facility is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located in the Physics Department of the University of Turin. Originally, it was mainly built to study systems of different scales where rotation plays a key role in the fluid behavior such as in atmospheric and oceanic flows. In the past few years the TurLab facility has been used to perform experiments related to the observation of Extreme Energy Cosmic Rays (EECRs) from space using the fluorescence technique. For example, in the case of the JEM-EUSO mission, where the diffuse night brightness and artificial light sources can vary significantly in time and space inside the Field of View of the telescope. The Focal Surface of Mini-EUSO Engineering Model (Mini-EUSO EM) with the level 1 (L1) and 2 (L2) trigger logics implemented in the Photo-Detector Module (PDM) has been tested at TurLab. Tests related to the possibility of using an EUSO-like detector for other type of applications such as Space Debris (SD) monitoring and imaging detector have also been pursued. The tests and results obtained within the EUSO@TurLab Project on these different topics are presented.
|
|
| 8. |
- Khvan, A. V., et al.
(författare)
-
Thermodynamic properties of tin: Part I Experimental investigation, ab-initio modelling of alpha-, beta-phase and a thermodynamic description for pure metal in solid and liquid state from 0 K
- 2019
-
Ingår i: Calphad. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0364-5916 .- 1873-2984. ; 65, s. 50-72
-
Tidskriftsartikel (refereegranskat)abstract
- Thermodynamic data for crystalline white and grey tin were assessed using an extended Einstein model from 0 K. Ab-initio simulations in the framework of density functional theory (DFT) with the quasiharmonic approximation (QHA) were carried out to define the heat capacities for both phases of tin from 0 K up to room temperatures. Good agreement was observed between theoretical and experimental heat capacities, which makes it possible to combine theoretical and experimental data to determine the standard entropies. Data for the liquid phase were described using a two state model. During the assessment, careful analysis of the experimental data was carried out. In order to fulfil the need for a precise evaluation of S-298(o) we needed to use an additional technique using multiple Einstein functions, which allows the experimental heat capacity and enthalpy data for the solid phase to be approximated accurately from 0 K up to the melting point and to estimate solid phase transition entropy and enthalpy which are difficult to measure due to a high activation barrier. Additional measurements of heat capacity were carried out where existing data were scarce.
|
|
| 9. |
- Sidnov, K. P., et al.
(författare)
-
Effect of alloying on elastic properties of ternary Ni-Al-Ti system: Experimental validation
- 2016
-
Ingår i: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 688, s. 534-541
-
Tidskriftsartikel (refereegranskat)abstract
- Using combustion synthesis approach we fabricated B2 NiAl intermetallic compound as well as quasibinary Ni(Al50Ti50) alloy, where half Al atoms are randomly substituted by transitional metal Ti. Youngs modulus for synthesized materials was measured and appeared to be 222 +/- 10 GPa for NiAl and 175 +/- 15 GPa for Ni(Al50Ti50) phases. Using first-principles simulations in the framework of the Density Functional Theory, we investigate the elastic properties of Ni(Al1-xTix) system, including single-crystal, as well as polycrystalline elastic moduli. Direct comparison of the experimental and theoretical values of the Youngs modulus demonstrates that the employed theoretical approach allows carefully predict elastic properties of NiAl-based intermetallics. In particular, we predict that alloying NiAl with Ti should increase the ductility of the intermetallic phase. (C) 2016 Elsevier B.V. All rights reserved.
|
|
| 10. |
- Chernyakov, A. E., et al.
(författare)
-
Modeling of Temperature Distribution Induced by Thermo-Mechanical Deformation of High-Power AlInGaN LED Arrays
- 2019
-
Ingår i: THERMINIC 2019 - 2019 25th International Workshop Thermal Investigations of ICs and Systems. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728120782
-
Konferensbidrag (refereegranskat)abstract
- Thermo-mechanical deformation, thermal resistance, and lateral temperature distribution were experimentally studied for a high-power AlGaInN LED chip-on-board array at three different input powers. A fullscale CFD model of the LED assembly was developed and correlated with the temperature and average thermal resistance measurements to enable prediction of the temperature distribution on the surface of a thermally deformed LED assembly. Application of the thermal resistance partitioning approach to thermal modeling of the deformed LED assemblies was discussed. It can be useful for design engineers for estimation of the temperature distribution across the deformed LED array, at the minimum number of temperature measurements required for model calibration.
|
|
