| 1. |
- Gosalawit-Utke, Rapee, et al.
(författare)
-
Ca(BH4)(2)-MgF2 Reversible Hydrogen Storage: Reaction Mechanisms and Kinetic Properties
- 2011
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:9, s. 3762-3768
-
Tidskriftsartikel (refereegranskat)abstract
- A composite of Ca(BH4)(2)-MgF2 is proposed as a reversible hydrogen storage system. The dehydrogenation and rehydrogenation reaction mechanisms are investigated by in situ time-resolved synchrotron radiation powder X-ray diffraction (SR-PXD) and Raman spectroscopy. The formation of an intermediate phase (CaF2-xHx) is observed during rehydrogenation. The hydrogen content of 4.3 wt % is obtained within 4 h during the first dehydrogenation at isothermal and isobaric conditions of 330 degrees C and 0.5 bar H-2, respectively. The cycling efficiency is evaluated by three release and uptake cycles together with absorbed hydrogen content in the range 5.1-5.8 wt % after 2.5 h (T = 330 degrees C and p(H-2) = 130 bar). The kinetic properties on the basis of hydrogen absorption are comparable for all cycles. As compared to pure Ca(BH4)(2) and Ca(BH4)(2)-MgH2 composite, Ca(BH4)(2)-MgF2 composite reveals the kinetic destabilization and the reproducibility of hydrogen storage capacities during cycling, respectively.
|
|
| 2. |
- Minella, Christian Bonatto, et al.
(författare)
-
Effect of Transition Metal Fluorides on the Sorption Properties and Reversible Formation of Ca(BH4)(2)
- 2011
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 115:5, s. 2497-2504
-
Tidskriftsartikel (refereegranskat)abstract
- Light metal borohydrides are considered as promising materials for solid state hydrogen storage. Because of the high hydrogen content of 11.5 wt % and the rather low dehydrogenation enthalpy of 32 kJ mol(-1)H(2), Ca(BH4)(2) is considered to be one of the most interesting compounds in this class of materials. In the present work, the effect of selected TM-fluoride (TM = transition metal) additives on the reversible formation of Ca(BH4)(2) was investigated by means of thermovolumetric, calorimetric, Fourier transform infrared spectroscopy, and ex situ, and in situ synchrotron radiation powder X-ray diffraction (SR-PXD) measurements. Furthermore, selected desorbed samples were analyzed by B-11{H-1} solid state magic angle spinning nuclear magnetic resonance (MAS NMR). Under the conditions used in this study (145 bar H-2 pressure and 350 degrees C), TiF4 and NbF5 were the only additives causing partial reversibility. In these two cases, B-11{H-1} MAS NMR analyses detected CaB6 and likely CaB12H12 in the dehydrogenation products. Elemental boron was found in the decomposition products of Ca(BH4)(2) samples with VF4, TiF3, and VF3. The results indicate an important role of CaB6 for the reversible formation of Ca(BH4)(2).
|
|
| 3. |
- Pranzas, P. Klaus, et al.
(författare)
-
Characterization of Hydrogen Storage Materials and Systems with Photons and Neutrons
- 2011
-
Ingår i: Advanced Engineering Materials. - : Wiley. - 1527-2648 .- 1438-1656. ; 13:8, s. 730-736
-
Tidskriftsartikel (refereegranskat)abstract
- Complex hydrides are very promising candidates for future light-weight solid state hydrogen storage materials. The present work illustrates detailed characterization of such novel hydride materials on different size scales by the use of synchrotron radiation and neutrons. The comprehensive analysis of such data leads to a deep understanding of the ongoing processes and mechanisms. The reaction pathways during hydrogen desorption and absorption are identified by in situ X-ray diffraction (XRD). Function and size of additive phases are estimated using X-ray absorption spectroscopy (XAS) and anomalous small-angle X-ray scattering (ASAXS). The structure of the metal hydride matrix is characterized using (ultra) small-angle neutron scattering (SANS/USANS). The hydrogen distribution in tanks filled with metal hydride material is studied with neutron computerized tomography (NCT). The results obtained by the different analysis methods are summarized in a final structural model. The complementary information obtained by these different methods is essential for the understanding of the various sorption processes in light metal hydrides and hydrogen storage tanks.
|
|
