| 1. |
- Hermansson, Ulric, et al.
(författare)
-
Screening for high-risk and elevated alcohol consumption in day and shift workers by use of the AUDIT and CDT
- 2003
-
Ingår i: Occupational Medicine. - : Oxford University Press (OUP). - 0962-7480 .- 1471-8405. ; 53:8, s. 518-526
-
Tidskriftsartikel (refereegranskat)abstract
- The present findings on employees who attended for regular health examinations suggest that shift workers did not show a higher level of risky alcohol consumption than day workers, according to the results with the AUDIT, CDT and GGT. On the contrary, the two-shift workers appeared to drink significantly less.
|
|
| 2. |
- Ahlgren, Karin, et al.
(författare)
-
De stora restaureringarna : Från Uppsala domkyrka till Skokloster
- 2004
-
Rapport (populärvet., debatt m.m.)abstract
- De stora restaureringarna har varit årets tema. Genom att dokumentera och analysera teori och praktik i några av 1800- och 1900-talets största restaureringar - från genomgripande stilrestaureringar till ett mer återhållsamt och tekniskt skonsamt synsätt. Därmed får vi också ett bättre underlag även för dagens ställningstagande.Föremål för våra studier är Uppsala domkyrka, Gripsholms slott, Vreta klosterkyrka, Gustav 11I:s paviljong i Haga, Kungapalatset i Vadstena och Skoklosters slott. Vi hoppas att denna utställning skall bidra till en kritisk hållning och en ökad kunskap om restaureringskonsten, som kvalificerad yrkesuppgift, tidsspegel för historiesyn och som gestaltningsideal.
|
|
| 3. |
- Ahlin, Kjell, et al.
(författare)
-
A smart way to analyze dynamic data
- 2003
-
Ingår i: Sound & Vibration. - : Acoustical Publications, Inc.. - 1541-0161 .- 2693-1443. ; :February, s. 20-22
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- In recent years MATLAB® has become a common software tool for general computational mathematics, in universities as well as in industry. In the field of noise and vibration analysis, MATLAB is very common in universities, but perhaps a little less common in the industrial world. In this article some ideas are presented on how MATLAB can be successfully used for analyzing experimental noise and vibration data. Through the introduction of toolboxes in this field, the less experienced user can take advantage of the powerful functionality of MATLAB, either as the main tool or as a complement to the many excellent menu driven systems available on the market. Some of the advantages and disadvantages of using MATLAB versus menu driven systems are also discussed.
|
|
| 4. |
- Andrén, Linus, et al.
(författare)
-
Identification of Dynamic Properties of Boring Bar Vibrations in a Continuous Boring Operation
- 2004
-
Ingår i: Mechanical systems and signal processing. - : Academic Press. - 0888-3270 .- 1096-1216. ; 18:4, s. 869-901
-
Tidskriftsartikel (refereegranskat)abstract
- Vibrations in internal turning operations are usually a cumbersome part of the manufacturing process. This article focuses on the boring bar vibrations. Boring bar vibrations in alloyed steel, stainless steel and cast iron have been measured in both the cutting speed direction and the cutting depth direction with the aid of accelerometers. The dynamic response of a boring bar seem to be a time varying process that exhibits non-linear behaviour. The process is influenced by non-stationary parameters that are not under the control of the operator or experimenter. The vibrations are clearly dominated by the first resonance frequency in one of the two directions of the boring bar. The problem with force modulation in rotary machinery, which appears as side band terms in the spectrum, is also addressed. Furthermore, the resonance frequencies of the boring bar are correlated to an Euler-Bernoulli beam model.
|
|
| 5. |
- Andrén, Linus, et al.
(författare)
-
Identification of Motion of Cutting Tool Vibration in a Continuous Boring Operation : Correlation to structural Properties
- 2004
-
Ingår i: Mechanical systems and signal processing. - : Academic Press, UK. - 0888-3270 .- 1096-1216. ; 18:4, s. 903-27
-
Tidskriftsartikel (refereegranskat)abstract
- The internal turning operation has a history of being a cumbersome metal working process as vibration in boring operations is usually inevitable. In this article, the deflection shapes and/or mode shapes as well as the resonance frequencies of a boring bar have been put under scrutiny. Three methods have been used in order to investigate dynamic properties of a clamped boring bar: a theoretical Euler-Bernoulli beam model, an experimental modal analysis and an operating deflection shape analysis. \\ The results indicate a correlation between the shapes of the deflection shapes and/or mode shapes produced by the three different analysis methods. On the other hand, the orientation of the forced deflection shapes and/or mode shapes and the resonance frequencies demonstrates differences between the three methods. During continuous cutting, it is demonstrated that the bending motion of the first two resonance frequencies is to a large extent in the cutting speed direction.
|
|
| 6. |
- Bengzon, Johan, et al.
(författare)
-
C-reactive protein levels following standard neurosurgical procedures
- 2003
-
Ingår i: Acta Neurochirurgica. - : Springer Science and Business Media LLC. - 0001-6268 .- 0942-0940. ; 145:8, s. 667-671
-
Tidskriftsartikel (refereegranskat)abstract
- Background. The aim of the present study was to establish the magnitude and time-course of C-reactive protein increases following routine neurosurgical procedures in the absence of clinical and laboratory signs of infection. Method. C-reactive protein levels were studied daily following ventriculo-peritoneal shunt implantation, anterior cervical fusion, vestibular schwannoma operation, supratentorial glioma surgery, endovascular intracranial aneurysm treatment and open cerebral aneurysm surgery. Findings. The magnitude of the C-reactive protein increase depended on the extent of surgical trauma and peak-levels were recorded between postoperative day one and four after which the levels tapered off. Interpretation. Increases occur-ring after the fourth postoperative day are likely to be caused by complications of surgery, e.g. infection.
|
|
| 7. |
|
|
| 8. |
- Brandt, Anders, et al.
(författare)
-
A Digital Filter Method for Forced Response Computation
- 2003
-
Konferensbidrag (refereegranskat)abstract
- Transient forced response of mechanical structures is usually computed using time domain integration. This is often computationally costly, and the numerical precision and stability are concerns. In the present paper, a novel method based on modal superposition, using a new digital filter implementation, is presented. Poles and residues of the model are used as input data, which allows for using data from a finite element model, a lumped parameter model, or from experimental modal analysis. Modal damping can be used if the damping matrix is unknown. With the proposed method, the frequency dependant error can easily be computed, and can be chosen arbitrarily small by selecting proper sampling frequency (time increment). The method is applicable to all linear structures and can be used for stationary or transient input data. Simulation results show that the new method is superior to the alternative methods, at less computational cost.
|
|
| 9. |
|
|
| 10. |
|
|
