1. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects
- 2012
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 220, s. 217-227
-
Tidskriftsartikel (refereegranskat)abstract
- The oxidation behaviour of the uncoated ferritic Fe-22Cr steel Sanergy HT is compared with an 640 nm Co coated version of the same material. The materials have been subject to corrosion and Cr volatilization measurements in air for up to 3000 h at 850 degrees C. Oxidation tests have been carried out both isothermal and discontinuously. The volatilization measurements were carried out using a recently developed denuder technique, which allows to quantify Cr evaporation in a time resolved manner. The oxidation process is studied from very initial phases (>15 s) to long term behaviour (3000 h). The formed oxide scales are analysed by XRD, SEM/EDX as well as TEM/EDX.The results show that both materials form an oxide scale with an inner layer of Cr2O3 and a spinel layer on top. In the case of the uncoated material, the spinel layer is of (Cr,Mn)(3)O-4 type while in the presence of a Co coating a (Co,Mn,Fe)(3)O-4 is formed. The Cr evaporation measurements show that despite the fact that the Co coating is very thin (640 nm) it effectively blocks Cr evaporation for at least 3000 h. This is in line with TEM analysis showing that after 3000 h there is only a low Cr content in the outer oxide scale. This long term stability indicates the suitability of the coated material as solid oxide fuel cell (SOFC) interconnect.
|
|
2. |
- Intiso, Luciana, 1981, et al.
(författare)
-
Oxidation Behaviour of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O-2/H2O Mixture at 600 degrees C
- 2012
-
Ingår i: Oxidation of Metals. - : Springer Science and Business Media LLC. - 1573-4889 .- 0030-770X. ; 77:5-6, s. 209-235
-
Tidskriftsartikel (refereegranskat)abstract
- The present study investigates oxidation at 600 A degrees C of alloy Sanicro 25 (42Fe22Cr25NiWCuNbN) in dry and wet O-2 environments. The exposure time was 1-168 h. The oxidized samples were analyzed by grazing incidence X-ray diffraction, glow discharge optical emission spectroscopy, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. Alloy Sanicro 25 showed protective oxidation behaviour under the present conditions. Initially, a thin and smooth corundum-type single layer base oxide formed, featuring a Cr-rich bottom part and a Fe-rich top. With time, double-layered oxide nodules form consisting of inward- and outward-growing parts. Below the oxide scale a 100-200 nm thick oxidation-affected zone formed in the alloy, which was depleted in Cr and enriched in Ni. In this region the chromium carbides and copper-rich particles present in the bulk alloy were dissolved. In O-2 + H2O environment, chromium volatilized from the surface, causing the chromium content of the oxide to be lower than after oxidation in dry O-2. However, under present experimental conditions, the Cr depletion of the scale was not enough to trigger accelerated corrosion of the alloy.
|
|