| 1. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 2. |
- Abazov, V. M., et al.
(författare)
-
The upgraded DO detector
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 565:2, s. 463-537
-
Tidskriftsartikel (refereegranskat)abstract
- The DO experiment enjoyed a very successful data-collection run at the Fermilab Tevatron collider between 1992 and 1996. Since then, the detector has been upgraded to take advantage of improvements to the Tevatron and to enhance its physics capabilities. We describe the new elements of the detector, including the silicon microstrip tracker, central fiber tracker, solenoidal magnet, preshower detectors, forward muon detector, and forward proton detector. The uranium/liquid -argon calorimeters and central muon detector, remaining from Run 1, are discussed briefly. We also present the associated electronics, triggering, and data acquisition systems, along with the design and implementation of software specific to DO.
|
|
| 3. |
- Abazov, V. M., et al.
(författare)
-
Measurement of the isolated photon cross section in p(p)over-bar collisions at root s=1.96 TeV
- 2006
-
Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 639:3-4, s. 151-158
-
Tidskriftsartikel (refereegranskat)abstract
- The cross section for the inclusive production of isolated photons has been measured in p (p) over bar collisions at root s = 1.96 TeV with the DO detector at the Fermilab Tevatron Collider. The photons span transverse momenta 23 to 300 GeV and have pseudorapidity vertical bar n vertical bar < 0.9. The cross section is compared with the results from two next-to-leading order perturbative QCD calculations. The theoretical predictions agree with the measurement within uncertainties.
|
|
| 4. |
- Abazov, V. M., et al.
(författare)
-
Search for single production of scalar leptoquarks in p(p)over-bar collisions decaying into muons and quarks with the D0 detector
- 2007
-
Ingår i: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 647:2-3, s. 74-81
-
Tidskriftsartikel (refereegranskat)abstract
- lWe report on a search for second generation leptoquarks (LQ(2)) which decay into a muon plus quark in (p) over barp collisions at a center-of-mass energy of root s = 1.96 TeV in the DO detector using an integrated luminosity of about 300 pb(-1). No evidence for a leptoquark signal is observed and an upper bound on the product of the cross section for single leptoquark production times branching fraction into a quark and a muon was determined for second generation scalar leptoquaiks as a function of the leptoquark mass. This result has been combined with a previously published DO search for leptoquark pair production to obtain leptoquark mass limits as a function of the leptoquark-muon-quark coupling, lambda. Assuming lambda = 1, lower limits on the mass of a second generation scalar leptoquark coupling to a u quark and a muon are m(LQ2) > 274 GeV and m(LQ2) > 226 GeV for beta = 1 and beta = 1/2, respectively.
|
|
| 5. |
|
|
| 6. |
- Spokes, L., et al.
(författare)
-
MEAD: An interdisciplinary study of the marine effects of atmospheric deposition in the Kattegat
- 2006
-
Ingår i: Environmental Pollution. - : Elsevier BV. - 0269-7491. ; 140:3, s. 453-462
-
Tidskriftsartikel (refereegranskat)abstract
- This paper summarises the results of the EU funded MEAD project, an interdisciplinary study of the effects of atmospheric nitrogen deposition on the Kattegat Sea between Denmark and Sweden. The study considers emissions of reactive nitrogen gases, their transport, transformations, deposition and effects on algal growth together with management options to reduce these effects. We conclude that atmospheric deposition is an important source of fixed nitrogen to the region particularly in summer, when nitrogen is the limiting nutrient for phytoplankton growth, and contributes to the overall eutrophication pressures in this region. However, we also conclude that it is unlikely that atmospheric deposition can, on its own, induce algal blooms in this region. A reduction of atmospheric nitrogen loads to this region will require strategies to reduce emissions of ammonia from local agriculture and Europe wide reductions in nitrous oxide emissions. (c) 2005 Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Kanis, J A, et al.
(författare)
-
The use of clinical risk factors enhances the performance of BMD in the prediction of hip and osteoporotic fractures in men and women.
- 2007
-
Ingår i: Osteoporosis international. - : Springer Science and Business Media LLC. - 0937-941X .- 1433-2965. ; 18:8, s. 1033-46
-
Tidskriftsartikel (refereegranskat)abstract
- SUMMARY: BMD and clinical risk factors predict hip and other osteoporotic fractures. The combination of clinical risk factors and BMD provide higher specificity and sensitivity than either alone. INTRODUCTION AND HYPOTHESES: To develop a risk assessment tool based on clinical risk factors (CRFs) with and without BMD. METHODS: Nine population-based studies were studied in which BMD and CRFs were documented at baseline. Poisson regression models were developed for hip fracture and other osteoporotic fractures, with and without hip BMD. Fracture risk was expressed as gradient of risk (GR, risk ratio/SD change in risk score). RESULTS: CRFs alone predicted hip fracture with a GR of 2.1/SD at the age of 50 years and decreased with age. The use of BMD alone provided a higher GR (3.7/SD), and was improved further with the combined use of CRFs and BMD (4.2/SD). For other osteoporotic fractures, the GRs were lower than for hip fracture. The GR with CRFs alone was 1.4/SD at the age of 50 years, similar to that provided by BMD (GR = 1.4/SD) and was not markedly increased by the combination (GR = 1.4/SD). The performance characteristics of clinical risk factors with and without BMD were validated in eleven independent population-based cohorts. CONCLUSIONS: The models developed provide the basis for the integrated use of validated clinical risk factors in men and women to aid in fracture risk prediction.
|
|
| 8. |
- Ejskjaer, N, et al.
(författare)
-
Ghrelin receptor agonist (TZP-101) accelerates gastric emptying in adults with diabetes and symptomatic gastroparesis
- 2009
-
Ingår i: Alimentary Pharmacology and Therapeutics. - : Wiley. - 0269-2813 .- 1365-2036. ; 29:11, s. 1179-1187
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: TZP-101 is a synthetic, selective ghrelin agonist in development for gastroparesis. AIM: To assess safety and effects of TZP-101 in diabetes patients with symptomatic gastroparesis. METHODS: Adults with type 1 or type 2 diabetes mellitus received placebo and TZP-101 (80, 160, 320 or 600 microg/kg) infusions in a cross-over manner following a radiolabelled meal. Blood glucose levels were stabilized using a hyperinsulinemic-euglycemic clamp. Primary endpoints were gastric half emptying and latency times. Secondary measures included assessment of gastroparesis symptoms and endocrine responses. RESULTS: Ten patients with type 1 (n = 7) or 2 (n = 3) diabetes, moderate-to-severe gastroparesis symptoms and > or =29% retention 4 h after a radiolabelled solid meal were enrolled. TZP-101 produced significant reductions in solid meal half-emptying (20%, P = 0.043) and latency (34%, P = 0.037) times vs. placebo. Reductions in overall postmeal symptom intensity (24%) and postprandial fullness (37%) following TZP-101 infusion were not statistically significant. Most adverse events were mild and self-limiting and there were no identifiable differences in numbers or types of adverse events between TZP-101 and placebo. CONCLUSIONS: This proof-of-concept study demonstrates that the ghrelin agonist TZP-101 is well-tolerated in diabetes patients with moderate-to-severe chronic gastroparesis and shows statistically significant improvements in gastric emptying.
|
|
| 9. |
|
|
| 10. |
- Gourgon, C., et al.
(författare)
-
Benchmarking of 50 nm features in thermal nanoimprint
- 2007
-
Ingår i: Journal of Vacuum Science and Technology B. - : American Vacuum Society. - 1520-8567. ; 25:6, s. 2373-2378
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of this benchmarking is to establish a comparison of several tools and processes used in thermal NIL with Si stamps at the nanoscale among the authors' laboratories. The Si stamps have large arrays of 50 nm dense lines and were imprinted in all these laboratories in a similar to 100 nm thick mr-18010E film. Other materials, such as mr-17010E, were also tested. Good patterns were obtained and some limitations were identified. Reducing the pressure to 15 bars enables the printing of 50 nm structures without pulling them off. At higher pressures, some bending effects resulting in pattern deformation were observed. It was proven that a pressure of 1.5 bars is sufficient to imprint perfect 50 nm lines. The influence of the antiadhesive layer and mold design has been characterized by the demonstration of pulled off lines in some cases. Moreover, it has been shown that the scatterometry method is particularly useful for the characterization of 50 nm lines and that the residual layer thickness corresponds to the theoretical estimate as long as the lines are well defined. One process was demonstrated which combines high reproducibility with high throughput, achieving a cycle time of 2 min. (c) 2007 American Vacuum Society.
|
|
