1. |
- Alshahrani, M. A.M., et al.
(författare)
-
High-Temperature Hydrogen Attack on 2.25Cr-1Mo Steel: The Roles of Residual Carbon, Initial Microstructure and Carbide Stability
- 2022
-
Ingår i: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. - : Springer Science and Business Media LLC. - 1073-5623. ; 54, s. 3682-
-
Tidskriftsartikel (refereegranskat)abstract
- High temperature hydrogen attack is a damage mechanism that occurs in critical steel components in petrochemical plants and refineries when the hydrogen penetrates the steel and reacts with the carbides within to produce pores containing methane. With the motivation of understanding the role of carbide stability on the reaction with hydrogen, samples of a classic 214Cr-1Mo steel were subjected to a variety of heat treatments that generate a corresponding variety of precipitates, prior to exposure to high-pressure hydrogen in an autoclave. Using quantitative carbide, porosity and microstructural characterisation, it has been possible to demonstrate the roles of four variables: (a) the carbon residue present in the ferrite; (b) the non-equilibrium chemical composition of carbide; (c) the fraction of the carbide that is closest to the thermodynamic equilibrium state and (d) the initial microstructural state, i.e., whether it is martensitic or bainitic prior to heat treatment.
|
|
2. |
- Colliander Celik, Å, et al.
(författare)
-
Därför krävs det stora satsningar på geografi och geovetenskap
- 2021
-
Ingår i: Läraren. - 1101-2633.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Som geografer, geovetare och geografilärare frågar vi oss varför kunskaper om vår livsmiljö, och de processer som styr den, är så styvmoderligt behandlade i skolan när vårt samhälle och stora delar av vår civilisation står inför många stora utmaningar, skriver 52 tunga företrädare.
|
|
3. |
- Eriksson, Erik, et al.
(författare)
-
The Effect of Grain Boundary Carbides on Dynamic Recrystallization During Hot Compression of Ni-Based Superalloy Haynes 282 TM
- 2021
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer. - 1073-5623 .- 1543-1940.
-
Tidskriftsartikel (refereegranskat)abstract
- In alloys where carbides are the main grain boundary phase, the role of carbides during hot working is not known. Here, we address the effect of grain boundary carbides on the dynamic recrystallization during hot compression of Ni-base superalloy Haynes 282. When excluding variations from experimental factors neither stress evolution nor final microstructure indicated that carbides exerted a significant influence on the dynamic recrystallization. The carbide solvus temperature is not a critical limit during thermomechanical processes.
|
|
4. |
- Kreins, M., et al.
(författare)
-
Bauschinger effect and latent hardening under cyclic micro-bending of Ni-base Alloy 718 single crystals: Part I. Experimental analysis of single and multi slip plasticity
- 2021
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - : Elsevier BV. - 0921-5093. ; 827
-
Tidskriftsartikel (refereegranskat)abstract
- Cyclic micro-bending tests on fcc single crystal Ni-base Alloy 718 cantilevers with different crystal orientations were performed to analyze the influence of activated slip systems on dislocation plasticity, latent hardening and the Bauschinger effect. The investigations indicate that plasticity in single crystal micro-cantilevers is significantly influenced by two phenomena - dislocation interaction and dislocation pile-up at the neutral plane. Both phenomena occur at the same time. Their ratio seems to be determined by the activated slip systems. Slip trace analysis indicates that the activation of only one slip system leads to a strong localization of plasticity to a limited number of parallel slip bands. This results in low dislocation interaction and consequently pronounced pile-ups at the neutral plane. In multi slip orientation, the second slip system leads to activation of significantly more dislocation sources, causing a much earlier and more homogeneous elastic-plastic transition zone. In stress-strain hysteresis loops during bending, pronounced dislocation interaction in multi slip orientation leads to a more pronounced latent hardening. The results suggest that on a microstructural length scale, plasticity behavior is strongly affected by activated slip systems, which determine local dislocation phenomena. Based on the results presented in this paper, a finite element analysis of latent hardening and the Bauschinger effect using a single crystal plasticity model with latent kinematic hardening is presented in Part II.
|
|