| 1. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 2. |
- Xin, Tongzheng, et al.
(författare)
-
Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing
- 2022
-
Ingår i: Acta Materialia. - : PERGAMON-ELSEVIER SCIENCE LTD. - 1359-6454 .- 1873-2453. ; 239
-
Tidskriftsartikel (refereegranskat)abstract
- Mg-Li-Al alloys with a body-centred cubic (BCC) structure can exhibit exceptional specific strengths in combination with excellent ductility and corrosion resistance. In general, the strength of these alloys is very sensitive to the processing temperature due to the occurrence of various phase transformations. Although different phases have been identified in these alloys, their corresponding transformation mechanisms and unique role played in controlling the mechanical properties have never been studied in depth. In this work, we identified the phase transformation sequence by in-situ synchrotron X-ray diffraction. Moreover, we investigated the evolution of precipitation and their morphology using transmission and scanning electron microscopy, together with simulations based on the phase field modelling and first-principles calculations. Phase transformation sequence of Al-rich zone?->?theta (D0(3)(-)Mg(3)Al)?->?AlLi was confirmed during anisothermal ageing. A braided structure resulting from spinodal decomposition was found to be the optimized microstructure for achieving the peak strength. Nanocrystalline alpha-Mg phase at the interface between theta and the matrix was identified as the main reason for softening in the alloy. The core-shell model for theta?->?AlLi transformation is observed and verified. Our findings deepen the understanding of BCC Mg-Li-Al alloys and pave a pathway to develop new generation of ultralight alloys with stronger strength and better stability. (C) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
|
|
| 3. |
- Xue, Shou Ye, et al.
(författare)
-
Changes in different land cover areas and NDVI values in northern latitudes from 1982 to 2015
- 2021
-
Ingår i: Advances in Climate Change Research. - : Elsevier BV. - 1674-9278. ; 12:4, s. 456-465
-
Tidskriftsartikel (refereegranskat)abstract
- Climate warming leads to vast changes in the land cover types and plant biomass in the northern high-latitude regions. The overall trend is of shrubland and tree lines moving northwards, while changes in different land cover types and vegetation growth in response to climate change are largely unknown. Here, we selected land areas with latitudes higher than 50°N as the study area. We compared the land cover type changes and explored relationships between the normalized difference vegetation index (NDVI) values of different land cover types, air temperature, and precipitation during 1982–2015 based on dynamic grid. The results indicated that forest and shrubland areas increased as a large area of grassland shifted to forest and shrubland. The snow/ice, tundra and grassland largely have decreased from 1982 to 2015. Although approximately 277.3 × 103 km2 of barren land (6.2% of the total barren land area in 1982) changed to tundra, the tundra area still decreased because some tundra shifted to forest and grassland. The NDVI values of tundra significantly increased, but the shrubland showed a decreasing trend. Temperature in the growing season (June to September) showed the largest positive correlation coefficients with the NDVI values of forest, tundra, grassland, and cropland. However, due to shrubification processes and plant mortality in shrubland areas, the shrubland NDVI showed negative relationship with annual temperature but positively correlated with monthly t. Taken together, although there is large room for improvement of the land cover type data accuracy, our results suggested that the land cover types in high-latitude regions changed significantly, while the NDVI values of the different land cover types showed different responses to climate change.
|
|
| 4. |
- Cui, Jun Jie, et al.
(författare)
-
Proposal for Observing XUV-Induced Rabi Oscillation Using Superfluorescent Emission
- 2023
-
Ingår i: Physical Review Letters. - : American Physical Society (APS). - 0031-9007 .- 1079-7114. ; 131:4
-
Tidskriftsartikel (refereegranskat)abstract
- Intense x-ray and extreme ultraviolet (XUV) light sources have been available for decades, however, due to weak nonlinear interaction in the XUV photon energy range, observation of Rabi oscillation induced by XUV pulse remains a very challenging experimental task. Here we suggest a scheme where photoionization of a He medium by an intense XUV pump pulse is followed by a strong population inversion and Rabi oscillation at the He+(1s-3p) transition and is accompanied by superfluorescence (SF) of the 7.56 eV pulse at the He+(3p-2s) transition. Our numerical simulations show that the Rabi oscillation at the He+(1s-3p) transition induced by an XUV pulse with photon energy 48.36 eV results in significant signatures in the SF spectra, allowing us to identify and characterize the XUV induced Rabi-oscillatory regime. The proposed scheme provides a sensitive tool to monitor and control ultrafast nonlinear dynamics in atoms and molecules triggered by intense XUV.
|
|
| 5. |
- Cui, Luqing, et al.
(författare)
-
Cyclic Response of Additive Manufactured 316L Stainless Steel : The Role of Cell Structures
- 2021
-
Ingår i: Scripta Materialia. - : Elsevier. - 1359-6462 .- 1872-8456. ; 205
-
Tidskriftsartikel (refereegranskat)abstract
- We report the effect of cell structures on the fatigue behavior of additively manufactured (AM) 316L stainless steel (316LSS). Compared with the cell-free samples, the fatigue process of fully cellular samples only consists of steady and overload stages, without an initial softening stage. Moreover, the fully cellular sample possesses higher strength, lower cyclic softening rate and longer lifetime. Microscopic analyses show no difference in grain orientations, dimensions, and shapes. However, the fully cellular samples show planar dislocation structures, whereas the cell-free samples display wavy dislocation structures. The existence of cell structures promotes the activation of planar slip, delays strain localization, and ultimately enhances the fatigue performance of AM 316LSS.
|
|
| 6. |
- Cui, Luqing, et al.
(författare)
-
New insights into the anisotropic ductility of additively manufactured Inconel 718
- 2023
-
Ingår i: International journal of plasticity. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0749-6419 .- 1879-2154. ; 169
-
Tidskriftsartikel (refereegranskat)abstract
- Anisotropic ductility in additively manufactured (AM) alloys, namely better ductility along the building direction (BD) has been extensively studied and traditionally attributed to the crystallographic texture. However, recent studies have shown significant ductility anisotropy in weakly or non-textured AM alloys, indicating that other factors may also play critical roles. To explore this, AM Inconel 718 with weak crystallographic texture was selected as the model material, and the in-situ high-energy X-ray diffraction tests together with multiscale microstructural characterization techniques were performed to explore the deformation micromechanisms. The results of this study, for the first time, revealed that the better ductility in the vertical specimen (loading parallel to BD) was partially due to the negative stress triaxiality factor (TF) of the {220} grains during plastic deformation, which results in the shrinkage or even healing of the microvoids. Furthermore, the & delta;-phase alignment in conjunction with grain boundary orientation were also proved to have a pronounced impact on the anisotropic ductility of AM alloys. On the other hand, though in the overall weak-textured microstructure, the proportion of 101 grains were marginally over other grains. Thus, the positive effect of {220} grains on ductility was stronger than the negative effect of {200} and {311} grains, contributing to the excellent failure elongation exceeding 12% for both samples. The findings of this study shed new light on the mechanisms underlying the anisotropic ductility of AM alloys and provide insight into strategies for enhancing their performance.
|
|
| 7. |
- Cui, Luqing, et al.
(författare)
-
Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel
- 2022
-
Ingår i: Journal of Materials Science & Technology. - Amsterdam, Netherlands : Elsevier. - 1005-0302. ; 111, s. 268-278
-
Tidskriftsartikel (refereegranskat)abstract
- We have investigated the low cycle fatigue (LCF) properties and the extent of strengthening in a dense additively manufactured stainless steel containing different volume fractions of cell structures but having all other microstructure characteristics the same. The samples were produced by laser powder bed fusion (L-PBF), and the concentration of cell structures was varied systematically by varying the annealing treatments. Load-controlled fatigue experiments performed on samples with a high fraction of cell structures reveal an up to 23 times increase in fatigue life compared to an essentially cell-free sample of the same grain configuration. Multiscale electron microscopy characterizations reveal that the cell structures serve as the soft barriers to the dislocation propagation and the partials are the main carrier for cyclic loading. The cell structures, stabilized by the segregated atoms and misorientation between the adjacent cells, are retained during the entire plastic deformation, hence, can continuously interact with dislocations, promote the formation of nanotwins, and provide massive 3D network obstacles to the dislocation motion. The compositional micro-segregation caused by the cellular solidification features serves as another non-negligible strengthening mechanism to dislocation motion. Specifically, the cell structures with a high density of dislocation debris also appear to act as dislocation nucleation sites, very much like coherent twin boundaries. This work indicates the potential of additive manufacturing to design energy absorbent alloys with high performance by tailoring the microstructure through the printing process.
|
|
| 8. |
- Cui, Peng, et al.
(författare)
-
Long-term androgen excess induces insulin resistance and non-alcoholic fatty liver disease in PCOS-like rats.
- 2021
-
Ingår i: The Journal of steroid biochemistry and molecular biology. - : Elsevier BV. - 1879-1220 .- 0960-0760. ; 208
-
Tidskriftsartikel (refereegranskat)abstract
- Women with polycystic ovary syndrome (PCOS) are at higher risk for metabolic disorders compared to healthy women, and about 51 % of women with PCOS suffer from non-alcoholic fatty liver disease (NAFLD). Investigation into the pathological mechanism behind this association will provide insights for the prevention and treatment of this complication.Dihydrotestosterone (DHT), a nonaromatic androgen, was used to mimic the pathological conditions of hyperandrogenism and insulin resistance. Hematoxylin and eosin staining, Oil Red O staining, immunofluorescent staining, Western blots, and qRT-PCR were used to verify the hepatic steatosis and inflammation, and the latter two methods were also used for energy and mitochondrion-related assays. ELISA was used to measure the level of reactive oxygen species.Twelve weeks of DHT exposure led to obesity and insulin resistance as well as hepatic steatosis, lipid deposition, and different degrees of inflammation. The expression of molecules involved in respiratory chain and aerobic respiration processes, such as electron transfer complex II, pyruvate dehydrogenase, and succinate dehydrogenase complex subunit A, was inhibited. In addition, molecules associated with apoptosis and autophagy were also abnormally expressed, such as increased Bak mRNA, an increased activated caspase-3 to caspase-3 ratio, and increased Atg12 protein expression. All of these changes are associated with the mitochondria and lead to lipid deposition and inflammation in the liver.Long-term androgen excess contributes to insulin resistance and hepatic steatosis by affecting mitochondrial function and causing an imbalance in apoptosis and autophagy, thus suggesting the pathogenesis of NAFLD in women with PCOS.
|
|
| 9. |
- Cui, Yuxiao, et al.
(författare)
-
Hierarchical soot nanoparticle self-assemblies for enhanced performance as sodium-ion battery anodes
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:16, s. 9059-9066
-
Tidskriftsartikel (refereegranskat)abstract
- The drawbacks of amorphous hard carbon are its low conductivity and structural instability, due to its large volume change and the occurrence of side reactions with the electrolyte during cycling. Here, we propose a simple and rapid method to address these disadvantages; we used an emulsion solvent-evaporation method to create hierarchically structured microparticles of hard carbon nanoparticles, derived from soot, and multi-walled-carbon-nanotubes at a very low threshold of 2.8 wt%. These shrub-ball like microparticles have well-defined void spaces between different nanostructures of carbon, leading to an increased surface area, lower charge-resistance and side reactions, and higher electronic conductivity for Na+ insertion and de-insertion. They can be slurry cast to assemble Na+ anodes, exhibiting an initial discharge capacity of 713.3 mA h g(-1) and showing long-term stability with 120.8 mA h g(-1) at 500 mA g(-1) after 500 cycles, thus outperforming neat hard carbon nanoparticles by an order of magnitude. Our work shows that hierarchical self-assembly is attractive for increasing the performance of microparticles used for battery production.
|
|
| 10. |
- Hu, Min, et al.
(författare)
-
Alterations of endometrial epithelial-mesenchymal transition and MAPK signaling components in women with PCOS are partially modulated by metformin in vitro. : Endometrial EMT and MAPK signaling components in PCOS patients
- 2020
-
Ingår i: Molecular human reproduction. - : Oxford University Press (OUP). - 1460-2407. ; 26:5, s. 312-326
-
Tidskriftsartikel (refereegranskat)abstract
- Growing evidence suggests that epithelial-mesenchymal transition (EMT) and its regulator mitogen-activated protein kinase (MAPK) contribute to endometria-related reproductive disorders. However, the regulation of EMT and MAPK signaling components in the endometrium from polycystic ovary syndrome (PCOS) patients has not been systematically investigated and remains elusive. In humans, how metformin induces molecular alterations in the endometrial tissues under PCOS conditions is not completely clear. Here, we recruited 7 non-PCOS patients during the proliferative phase (nPCOS), 7 non-PCOS patients with endometrial hyperplasia (nPCOSEH), 14 PCOS patients during the proliferative phase (PCOS), and 3 PCOS patients with endometrial hyperplasia (PCOSEH). Our studies demonstrated that compared with nPCOS, PCOS patients showed decreased Claudin 1 and increased Vimentin and Slug proteins. Similar to increased Slug protein, nPCOSEH and PCOSEH patients showed increased N-cadherin protein. Western blot and immunostaining revealed increased epithelial phosphorylated Cytokeratin 8 (p-CK 8) expression and an increased p-CK 8:CK 8 ratio in PCOS, nPCOSEH, and PCOSEH patients compared to nPCOS patients. Although nPCOSEH and PCOSEH patients showed increased p-ERK1/2 and/or p38 protein levels, the significant increase in p-ERK1/2 expression and p-ERK1/2:ERK1/2 ratio was only found in PCOS patients compared to nPCOS patients. A significant induction of the membrane ERβ immunostaining was observed in the epithelial cells of PCOS and PCOSEH patients compared to nPCOS and nPCOSEH patients. While in-vitro treatment with metformin alone increased Snail and decreased Claudin 1, N-cadherin and α-SMA proteins, concomitant treatment with metformin and E2 increased the expression of CK 8 and Snail proteins and decreased the expression of Claudin 1, ZO-1, Slug and α-SMA proteins. Our findings suggest that the EMT contributes to the switch from a healthy state to a PCOS state in the endometrium, which might subsequently drive endometrial injury and dysfunction. We also provide evidence that metformin differentially modulates EMT protein expression in PCOS patients depending on estrogenic stimulation.
|
|
